Enable SSB-SINR based CSI reporting
3GPP 38.331 release 16 specifies that If the field reportQuantity-r16 is present,
UE shall ignore reportQuantity (without suffix). reportQuantity-r16 configures
SSB based SINR as the reporting quantity.
set do_SINR = 1; in gNB params part of the config file to enable SSB based SINR
reporting.
This commit refactors the TUN interface management by moving its creation
and configuration from the PDCP layer to the SDAP layer for UE.
Key changes include:
- Introduced `tun_generate_ue_ifname` and `tun_destroy` functions for better
TUN interface lifecycle management.
- Added support for creating and destroying UE-specific TUN interfaces in SDAP.
- Refactored `nr_pdcp_module_init` to remove TUN-related logic and moved it
to SDAP.
- Updated NAS and SDAP layers to handle PDU session-specific TUN interface
creation and configuration.
- Enhanced SDAP entity management to include TUN socket handling and thread
lifecycle.
- Updated NAS message handling to initialize default PDU session TUN
interfaces in NOS1 mode.
- Use a single SDAP thread function for gNB and UE
- Allow noS1 mode also in SA on gNB
These changes improve modularity by isolating TUN interface management within
the SDAP layer, aligning with the 3GPP architecture, and simplifying the PDCP
layer.
Co-Authored-By: Robert Schmidt <robert.schmidt@openairinterface.org>
CI: Replacing Devkit server with a Grace Hopper in Aerial pipeline
Switch servers on the Aerial pipeline from Gigabyte (AMD) to Grace
Hopper (ARM), and make the necessary changes:
- Update XML, YAML, and gnb.conf
- Change the argument passed to the L1 in aerial_l1_entrypoint.sh to be
compatible with the GH
- Update the Aerial setup in TESTBench.md and Aerial_FAPI_Split_Tutorial.md docs
- Decrease the tested throughput due to an issue with the RU. Will open
another MR to increase it once the problem is fixed.
NR UE: add support for continuous frequency offset compensation (in particular NTN LEO Doppler)
- move function add_noise() to file
openair1/SIMULATION/TOOLS/phase_noise.c
- refactor (co)sinus calculation out of phase_noise() into get_sin_cos()
in nr_common.c
- NR UE: continuously estimate the frequency offset using PBCH DMRS
- NR UE: add command line parameter --initial-fo to specify known
initial frequency offset
- NR UE: add support for continuous DL frequency offset compensation
--cont-fo-comp
- NR UE: add support for continuous UL frequency offset
pre-compensation. Depending on the main source of frequency offset,
pre-compensate the UL frequency offset (FO) accordingly. Therefore
modify the flag --cont-fo-comp to accept an integer value, where
* 1 specifies, that the main FO contribution comes from the accuracy of the local oscillator (LO)
* 2 specifies, that the main FO contribution comes from Doppler shift
- NR UE: add PI controller to continuous frequency offset compensation
- rfsimulator: enable and correct NTN LEO doppler simulation
- use SIMD to speed up nr_fo_compensation()
- Extend NTN LEO example in RUNMODEM.md to include continuous Doppler
compensation
- NR UE: in nr_adjust_synch_ue() extend the peak search to +/- cyclic
prefix size, esp. for LEO NTN scenarios the timing drifts during
initial sync, which is mostly compensated with
--ntn-initial-time-drift. But there might be a residual time offset,
and by extending the peak search window we make this more tolerant.
- NR UE: remove unused nr_slot_tx_offset, it is unused since commit
f3e60a14
- NR UE: remove now unnecessary local variable
update_ntn_system_information, directly use
UE->ntn_config_message->update instead
- Update the Aerial tutorial to include Grace Hopper server and add reference to Gigabyte server setup instructions.
- Update the Aerial setup in the TESTBench.md
Depending on the main source of frequency offset, pre-compensate the UL frequency offset (FO) accordingly.
Therefore modify the flag `--cont-fo-comp` to accept an integer value, where
- `1` specifies, that the main FO contribution comes from the accuracy of the local oscillator (LO)
- `2` specifies, that the main FO contribution comes from Doppler shift
- Cleanup and update of "Machines" table:
- remove asterix - not used in CI
- remove nokiabox - not used in CI
- remove orion - not used in CI
- update of "Lockable Resource" for individual machines - synch with
https://jenkins-oai.eurecom.fr/lockable-resources/
- remove column of "IP Address"
- Update information about build pipelines
FHI72: Management plane support
At the moment, tested with Benetel 550 and 650 RUs FW v1.2.2
- support for multiple RUs
- RPCs implemented: <connect>, <subscribe>, <get>, <supervision-watchdog-reset>,
<edit-config>, <validate>, <commit>, <disconnect>
- read PTP sync status from operational datastore xml
- get vendor name, and for xran store RU MAC, MTU and IQ bitwidth and PRACH
offset, and transfer this info
- store interface name, low-level-tx/rx-endpoint names, tx/rx-carrier names,...,
from operational datastore xml
- add reference gNB/DU config files with M-plane support
- update FHI readme
Add documentation for Foxconn RU
This MR adds documentation for using the Foxconn RU with OAI, as it piques the
interest of some in the community. Note that this RU is not continuously tested
with OAI L1. Additionally, we have observed throughput degradation in OAI
versions beyond tag 2024.w30, and the issue is under investigation. For now, we
are providing documentation based on what we have tested in our lab.
- This addition is based on past tests, iperf3 UDP throughput was 520Mbps DL and 40Mbps UL.
- Throughput degrades when using OAI L1 with tags beyond `2024.w30`.
- This RU is being CI tested only in the Aerial pipeline, not with OAI L1.
- The document will be updated once the issue is identified and fixed.
Realtime and near-realtime RFSimulator alternative without channel modelling.
The purpose of this library is to allow realtime simulation of gNB and nrUE.
The library is loaded using --device.name shm_radio. The server side (gNB) should also
configure --shm_radio.role server and --shm_radio.timescale <timescale> according to requirements.
Limitations:
- Only 1UE-to-1gNB connection supported
Future work:
- Channel modelling
- Telnet API
- Histogram of the TX time budget
Update FHI 7.2 documentation, minor code cleanup
- remove some unused functions
- make one function static
- add callback function documentation
- provide some developer function
Add support for ARM build pipeline
Modify the existing python code to be able to build images where the
image tag can be prepended with a prefix, here arm_. This is preparatory
work to create the ARM build image pipeline, and reuse the existing
internal registry on porcepix to have x86 and ARM images coexist.
Fix various bugs in the build system to allow to build on a system with
as many cores as gracehopper.
Also, fix two programs (usim, nvram) to work correctly under ARM.
FHI72: remove polling, fix memory leak
- FHI72 used polling to track the next slot. This is not necessary, a
simple queue does the job and allows to save one core that was
previously at 100%
- Remove a workaround to avoid a memory leak (fixes#812); allows to
also run RFsim/USRP/otehr radios when compiling for FHI72
fix NTN LEO scenarios
- gNB: add support for NTN parameter ta-CommonDrift-r17
- NR UE: fix application of NTN TA information
- NR UE: add command line parameter ntn-initial-time-drift to compensate
time drift during initial sync
- NR UE: fix writeTimestamp inconsistencies
- NR UE: add MAC state UE_RECEIVING_SIB ensuring to start RA only after
successfully receiving SIBs
- rfsimulator: update earth radius for LEO simulation to match UE
position in ue.conf file
- update conf files for NTN LEO scenario
- update description how to run NTN scenarios in RUNMODEM.md
- fix: ta-Common is a round-trip-time, not a one-way delay
- NR UE: simplify calculation of next_tx_slot_and_frame by moving up
assignment of duration_rx_to_tx
- cellbarredNTN indicates notbarred in SIB1 if NTN access is available
- Removed b66 NTN and enabled B254 NTN conf file in CI
- NR UE: RRC layer now explicitly tells MAC layer when the RA procedure
can be started
- move NTN LEO config to band 254 and update doc/RUNMODEM.md
Closes#901
Laurent THOMAS