The usage of this flag in the L1 is simply wrong: either, the NFAPI mode
runs L1, or not. Correspondingly, add an assert to check this invariant.
In the NR_IF_module, the correct check to do is for VNF (implying no L1,
or "emulation of L1" [which is not true]), in which case we use
queues.
Since commit defc97ec16 ("Msg2 and Msg3 at gNB: check allocation before
committing to Msg2"), the scheduler calculate Msg2/Msg3 frame/slot
before allocation of Msg2, and not when receiving Msg1. It also respects
the RA response window correctly.
Correspondingly, we don't need to calculate here if the RACH.indication
is within the time window. The scheduler will do this.
FAPI says these lists should be for MAX_TDD_PERIODICITY (which is maybe
a frame, or a TDD period? but likely not two frames). Reduce to one
frame.
Also, the nFAPI code assumes one entire frame, so use that (this commit
necessary to actually make the PNF work, otherwise, the
packing/unpacking of the FAPI message would need to do 2 frames).
Closes: #876
Upon reception of FAPI UL messages (e.g., RACH.indication), those
messages are put into queues, to be delivered in a single call,
NR_UL_indication(). Call the scheduler to trigger processing in UL.
Note that ideally, these queues should not exist at all, and messages
should just be delivered asynchronously, as this would lead to less
copying of messages. Currently, we fulfill the scheduler interface
instead.
Important! Trigger UL after having run DL scheduler and sent the
messages, to ensure short delay between Slot.indication, and the
response to those messages.
Use this function to implement distinct behavior for monolithic or PNF:
- monolithic: run the scheduler, as normal
- PNF: send a slot indication; the VNF will send an answer which the PNF
will handle elsewhere.
Add function declarations to make nr_ulsim compile, as NR_IF_Module.c is
part of the MAC sources. As of now, this is necessary; I think the right
way would be to take NR_IF_Module.c out of the MAC, and make this a
"glue" library that sticks L1 and L2 together, in monolithic (in VNF, in
that case, we should not link in L1, and for the PNF not the L2,
creating separate executables... Rome was not built in one day).
RSSI threshold for PUSCH & PUCCH power control
To prevent ADC railing or "clipping" when the received power is too
large, introduce RSSI threshold parameters for PUSCH and PUCCH, which
are now configured in units of 0.1 dB. Here is how you can configure and
use these thresholds:
1. Configuration:
- Set the pusch_RSSI_Threshold and pucch_RSSI_Threshold parameters in
your configuration file (e.g., gnb.conf) (MACRLC section).
- These parameters define the maximum acceptable RSSI values for
PUSCH and PUCCH, respectively. The unit is either dBm or dBFS,
depending on the RSSI reporting configuration.
2. Usage:
- The nr_limit_tpc function will automatically adjust the Transmit
Power Control (TPC) commands based on the configured RSSI
thresholds.
- If the RSSI exceeds the threshold, the TPC command will be limited
to prevent further increase in power, thereby avoiding ADC
clipping.
Introduce ITTI queue in RRC-to-MAC direction
resolve ue rcc to mac race conditions by a itti queue, but it doesn't
resolve the problem of exact slot we should apply the new cell
configurtion
Move UL_INFO structure allocation local to a rx slot processing
UL_INFO is allocated a gNB, so require mutex and obscur information
passing function to function. Instead, make a local UL_INFO per slot,
removing the mutex and making the code easier to understand.
Use UL_INFO on the stack, to simplify the code. move in the same struct
the associated rach, pdu, crc, srs arrays that where pointed from
directly in gNB structure Keep in nfapi the existing logic that make
malloc for theses rach, pdu, crc, srs array lists
Pass only relevant fields, where appropriate.
Co-authored-by: Robert Schmidt <robert.schmidt@openairinterface.org>
NR UE fix DCI mask size
Previous maximum size was 15 but in practice it could be at least up to
18. Also moved assertion on non-contiguous type0 DLSCH allocation to L1
(to remove blocking point for L2 implementation).
NR gNB MSG3 TPC
This MR improves the handling of MSG3 TPC commands at MAC gNB.
TODO: Compute TPC when PRACH sends a valid power measurements (currently
not the case for OAI L1, to be verified with Aerial L1)
Closes#866
NR gNB improvements for analog beam management
- Improvements at gNB MAC layer to properly handle analog beam
management for all channels
- Simple beam switching mechanism based on UE RSRP report
- Introduced new configuration parameters `pusch_RSSI_Threshold` and `pucch_RSSI_Threshold`
(MACRLC section)
- Added `nr_limit_tpc` function in `gNB_scheduler_primitives.c` to limit TPC based on RSSI
threshold.
- Integrated `nr_limit_tpc` in PUCCH and PUSCH power control
Example Configuration
puxch_RSSI_Threshold takes value between -1280 and 0 and is mapped to range -128.0 dBm/dBFS
to 0.0 dBm/dBFS in 0.1 dB increments. Unit depends on RSSI reporting config.
pucch_RSSI_Threshold = -500; # Set the PUSCH RSSI threshold to -50.0dBm/-50dBFS
pucch_RSSI_Threshold = -600; # Set the PUCCH RSSI threshold to -60.0dBm/-60dBFS
The parent commit cleans up and groups oai_exit in one place,
nr-softmodem-common.h. Therefore, this 5G file is included in the 4G
defs_common.h (at least it's mostly 4G), which is not nice. Instead,
define oai_exit also in 4G softmodem-common.h, and include this in
defs_common.h. Remove the cyclic inclusion of defs_common.h in
softmodem-common.h, and resolve all subsequent errors around unknown
types and extern definition mismatches.
Commit d641a76196 ("fix BSR report malformed, add SHORT BSR when it
can") removed code to fill the remainder of a TB, if it is not filled
with data from RLC, with random data when using phy-test or do-ra modes.
This random data filling is intentional, as it might prove useful for
demos or when debugging (e.g., to see used spectrum instead of 0, etc.).
Reintroduce the functionality, but unlike the original code, make it
dependent on the mode, not RFsim.
See also discussion in #888.
Fixup: d641a76196
Reduce race conditions through a itti queue, such that RRC-initiated MAC
memory modifications happen at the same time as MAC thread writes.
However, it doesn't resolve the problem of exact slot we should apply
the new cell configurtion.
Fix TPMI for UL retransmissions
If the ul_ri of srs_feedback changes between a UL transmission and a
retransmission, we use the TPMI of transmission.
Closes#879
Assertion ((*nrOfLayers==1 && srs_feedback->tpmi <= 1) || (*nrOfLayers==2 && srs_feedback->tpmi == 0)) failed!
In compute_precoding_information() /home/user/openairinterface5g/openair2/LAYER2/NR_MAC_COMMON/nr_mac_common.c:2896
TPMI 1 is invalid!
Add support for O1 in O-DU via telnet
This change set adds a simple telnet interface to nr-softmodem. Together
with oai/o1-adapter>, this implements a part of the O1 interface, for
the DU only. Currently supported uses cases:
- some stats are send to an SMO (such as bandwidth, PLMN, frequency, ...)
- re-configuration of bandwidth, frequency
- stop/start of the softmodem, while keeping the CU and L2 running
- the o1-adapter implements two alarms, load overload and base station
offline, using this interface.
It is possible to use the telnet interface by itself (i.e., "o1" without
the o1-adapter). To do this, compile with telnet support (./build_oai
--build-lib telnetsrv) and start the nr-softmodem with O1 module
(./nr-softmodem --telnetsrv --telnetsrv.shrmod o1). You can then do the
following:
- see some statistics as exposed to o1-adapter, in JSON: echo o1 stats | nc 127.0.0.1 9090 && echo
- stop the L1: echo o1 stop_modem | nc 127.0.0.1 9090 && echo
- reconfigure bandwidth: e.g., echo o1 bwconfig 20 | nc 127.0.0.1 9090 && echo (also supported: 40, 60, 100)
- start the L1: echo o1 start_modem | nc 127.0.0.1 9090 && echo
Note that the reconfiguration works with split-8 radios. Notably, it
does not work yet out-of-the-box with 7.2 radios, because they have to
be manually reconfigured on bandwith/frequency switch. The planned
M-plane should allow such use case, though.
To help with the above, this branch also includes fixes (for more
information, refer to the corresponding commits):
- fixes for stopping the L1, notably stop threads in right order, stop
thread pool of RU
- collect some general MAC metrics, fix some bugs in MAC
- fix problems in F1AP gNB-DU configuration update message, update test
- fix some problems in RRC
The consumer of this function just passes a pointer to something to be
sent. This function should not free this memory, it's simply not it's
task. This is the same bug as above in
"CU_handle_gNB_DU_CONFIGURATION_UPDATE(): don't free the message of RRC"
Robert Schmidt