The primary motivation here is to remove a VLA, as in the parent
commits. Closer inspection revealed that (1) it is only used by the LTE
UE, and (2) it only logs some data which we likely don't need. So I
simply removed this function.
Upon failure, the error message was saying that something failed (i.e.,
the reason), but not parameters of the getaddrinfo(). Simplify root
cause analysis by providing the parameters for the attempted
getaddrinfo() call.
This function is needed also in upcoming NGAP
libraries (i.e. N2 Handover) and therefore is moved
to the NGAP utilities file. The function converts
transport_layer_addr_t data struct to BIT_STRING_t
by copying the content of its members. The naming
is also updated to tnl_to_bitstring.
* Functions added:
decode_ngap_guami
decode_ngap_UEAggregateMaximumBitRate
decode_ngap_nssai
decode_ngap_security_capabilities
decode_ngap_mobility_restriction
* Adopt these functions in the common NGAP library
- remove hardcoded values
- adapt gNB RRC code
- adapt gNB MAC code
- adapt physical simulators, where we put the hardcoded values
that were everywhere else before; if there is a need for those
simulators to get configurable values, more work is needed
(but it's doubtful that it is needed)
To be used in a later commit to retrieve NR PDCP configuration
parameters.
To use, add the following to the configuration file (outside of other
configurations). Adapt the values to your setup. The names ("len18bits",
"ms100", etc.) come from 3GPP TS 38.331.
pdcp = {
drb = {
sn_size = "len18bits"
t_reordering = "ms100"
discard_timer = "infinity"
}
}
Default values are applied if the configuration is absent.
The default values are the ones given above.
To be used in a later commit to retrieve NR RLC configuration
parameters.
To use, add the following to the configuration file (outside of other
configurations). Adapt the values to your setup. The names ("ms45",
"size12", etc.) come from 3GPP TS 38.331.
rlc = {
srb = {
t_poll_retransmit = "ms45"
t_reassembly = "ms25"
t_status_prohibit = "ms0"
poll_pdu = "infinity"
poll_byte = "infinity"
max_retx_threshold = "t8"
sn_field_length = "size12"
}
drb_am = {
t_poll_retransmit = "ms45"
t_reassembly = "ms15"
t_status_prohibit = "ms15"
poll_pdu = "p64"
poll_byte = "kB500"
max_retx_threshold = "t32"
sn_field_length = "size18"
}
drb_um = {
t_reassembly = "ms15"
sn_field_length = "size12"
}
}
Default values are applied if the configuration is absent.
The default values are the ones given above.
Integration: `2025.w23`
Closes#962, #956, and #801
See merge request oai/openairinterface5g!3464
* !3302 Enhance UE identity management in Initial UE Message and other NGAP improvements
* !3400 T bugfix: check input data a bit better
* !3459 Improvements in NR band tables according to Rel.17
* !3465 Fix checking that amf_ip_address section is not set.
* !3463 Move RRC radio parameters file to DU
* CI: Use host network mode in NSA-B200 pipeline
* !3389 Relax NR_UE_CAPABILITY_SLOT_RX_TO_TX asserts
* !3417 Imscope updates
* !3443 Fix data race in NR UE MSG3 scheduling
* !3467 remove dead globals
Fix data race in NR UE MSG3 scheduling
Fixed a data race between DL processing of RAR and UL scheduler, which might
result in dropping MSG3.
It was possible that the UL scheduler for the UL slot which RAR indicates as
MSG3 slot was already run by the time the RAR was decoded.
Therefore when DCI for RAR is decoded, assume worst case and halt UL scheduler
for next slot until RAR is decoded solving the data race. This also in turn
halts all later scheduling due to sequential nature of the UL scheduler calls.
Closes#962
imscope updates
- Add CSV export button to imscope
- Add extra cache for IQ data in imscope record thread so that UE time domain
data can be kept until PDSCH is decoded.
- Add metadata to UE time domain samples scope
- Add UE pdsch pre-compensation IQ and PDSCH channel estimates
Move RRC radio parameters file to DU
A number of radio-related RRC parameters, e.g., CellGroupConfig, "originate" at
the DU and are sent to the CU for forwarding to the UE only. Similarly, there
are additional parameters, e.g., RLC-BearerConfig (part of CellGroupConfig),
that originate at the DU.
Hence, the DU decides about these parameters, depending on the MAC state and
capabilities. To clarify this, move the existing
openair2/RRC/NR/nr_rrc_config.{c,h} => openair2/LAYER2/NR_MAC_gNB/nr_radio_config.{c,h}
So that developers know that while those are RRC parameters, they originate at
the DU.
In other words, the CU/RRC is not supposed to use any of these functions in
the RRC. Correspondingly, includes of this file have been cleaned up (and when
they are not necessary at the MAC as well)
Fixed a data race between DL processing of RAR and UL scheduler, which
might result in dropping MSG3.
It was possible that the UL scheduler for the UL slot which RAR
indicates as MSG3 slot was already run by the time the RAR was decoded.
Therefore when DCI for RAR is decoded, assume worst case and halt the
earliest corresponding UL scheduler call until RAR is decoded solving
the data race. This also in turn halts all later scheduling due to
sequential nature of the UL scheduler calls.
Following a power cycle of the CI machines in the NSA-B200 setup, the gNB
machine encountered a networking issue. Although packets were observed leaving
and returning to the host of gNB, they failed to reach the container.
Debugging steps taken:
- upgraded the gNB machine
- reinstalled Docker
- reviewed and verified IP rules and routing settings
Setting the container to use host network mode resolved the issue.
Enhance UE identity management in Initial UE Message and other NGAP improvements
This MR improves the Initial UE Message procedures by supporting simultaneous
presence of both 5G-S-TMSI and GUAMI. Previously, only one identity could be
used, leading to potential AMF selection failures. Now the presenceMask allows
both identities. The AMF selection is prioritizing GUAMI first, then falling
back to 5G-S-TMSI, and finally using PLMN or highest capacity.
Also, fix handling of selected PLMN identity in NGAP.
Refactoring:
- Select the AMF based on (1) absence of UE Identity (2) Presence of GUAMI
(3) Presence of 5G-S-TMSI
- Also refactored the AMF selection logic for better readability and reliability.
- Refactor and cleanup rrc_gNB_send_NGAP_NAS_FIRST_REQ
- Replace ngap_pdu_t with byte_array_t
- Add guami_t to ngran_types.h: refactor NGAP and RRC code to use one common
GUAMI type instead of two identical ones
Also:
- Bugfix in ngap_gNB_handle_ng_setup_response: use correct count for PLMNSupportList
Closes issue #801
A number of radio-related RRC parameters, e.g., CellGroupConfig,
"originate" at the DU and are sent to the CU for forwarding to the UE
only. Similarly, there are additional parameters, e.g., RLC-BearerConfig
(part of CellGroupConfig), that originate at the DU.
Hence, the DU decides about these parameters, depending on the MAC state
and capabilities. To clarify this, move the existing
openair2/RRC/NR/nr_rrc_config.{c,h} => openair2/LAYER2/NR_MAC_gNB/nr_radio_config.{c,h}
So that developers know that while those are RRC parameters, they
originate at the DU.
In other words, the CU/RRC is not supposed to use any of these functions
in the RRC. Correspondingly, includes of this file have been cleaned up
(and when they are not necessary at the MAC as well).
Guido Casati