NR UE trigger for re-establishment
The implementation in this MR triggers RRC re-establishment at the UE in case
of radio link failure either for out of sync messages from lower layers or in
case maximum number of RLC retransmissions is reached.
Upon press of ^C, the UE triggers a NAS deregistration. This does not
work in do-ra or phy-test modes, because there is no NAS. Therefore, in
non-SA modes, just stop the UE directly.
Set SA mode as default
- Set standalone (SA) mode as the default.
- Adjust commands in Docker Compose files by removing --sa flags and
adding --nsa flags where applicable.
- Add a function to verify that only one mode is being used at a time.
- Update all relevant documentation.
THere are four possibilities, for the three options (phy_test, do_ra,
nsa):
- None is set -> SA
- Only one is set of each -> corresponding mode
Introduce a function softmodem_verify_mode() to check for these.
csiim_vars/csirs_vars used to be global array for each UE. Now its present
in phy_data which is in dynamically allocated memory.
MAC config was done without mutex while DL and UL threads could be running
at the same time.
get_ue_nas_info was allocating memory possibly from more than one thread.
Moved it into new init function for UE NAS layer.
Addreses most issues in #869
* the goal of this function is to initialize and configure the RAN Context
* the goal of get_options is to get command line options
* this commit aims at making the implementation more consistent
* move initialization of RC.nb_nr_CC to this function
* cleanup redundant initializations of RC.nb_nr_macrlc_inst outside NRRCConfig
* cleanup redundant initization of RC.nb_nr_macrlc_inst from getter function (get_node_type)
* cleanup RC initialization in RCconfig_NR_L1
* removed redundant log lines (print number of instances in NRRCConfig only)
* do RC init after getting CL options and configuration
* get_node_type shall access configuration only, not RC context
* NRRCConfig shall be called only once: made it thread-safe
* nb_nr_inst represents the number of gNB instances and the number of RAN contexts
* it used also to count the number of RRC instances in the node
* it is set from config file in NRRCConfig, therefore redundant checks after
this function have been removed
* redundant global variable NB_gNB_INST, set after nb_nr_inst, was removed
* gNB and L1 init is done in init_gNB and RCconfig_NR_L1
* moved RCconfig_nr_prs out of create_gNB_tasks for consistency
* do RCconfig_nr_prs only for L1 instances
Fix Regression 4G
- Fix various bugs and/or regressions in 4G code
- Also, the CI does not test RFsim 4G with --sanitize, enables this to
detect problems.
This commit removes many logs that just show memory addresses, indices,
etc., which, I presume, do not mean anything to the "average user" and
developers alike.
Add F1 Handover procedures
- Clean up at RRC and MAC
- Add DU handover procedures, completely handle CellGroupConfig at DU
- Add CU handover procedures
- Maintain reestablishment working between/after handover
- Changes at UE to resync on different frequency DUs
Instructions: see doc/handover-tutorial.md
Things not implemented/open/missing: see #855
Add a new scope data source (ueTimeDomainSamples) which provides time domain samples
for antenna 0 to the scope. Add graphical representation of the data in imscope.
Removed C-define from ENABLE_IMSCOPE cmake option, the #define was unused and this way
code does not have to be recompiled when imscope enable state changes.
Currently, NR PDCP ticks are active only with monolithic gNB, triggered by the MAC scheduler in gNB_scheduler.c.
In F1 split mode, as there is no MAC, there’s no source to advance the NR PDCP timer via "nr_pdcp_wakeup_timer_thread()".
This commit introduces a dedicated thread for NR PDCP ticks in gNB-CU and CU-UP mode.
Without it, packet losses at the F1 uplink would cause indefinite buffering, as t-Reordering won't expire due to the lack of NR PDCP timer ticks.
Experiments did show that the time sync is less stable in terrestrial mode if the integral part of the PI controller is used.
So set it to 0.0 by default. For NTN LEO use case we can still use it by providing the command line parameter --time-sync-I 0.2 .
fixes#846
Jaroslava Fiedlerova