- Phy config update and Sidelink frame parameters initialisation
- PSBCH scheduler to trigger TX PSBCH/RX PSBCH actions
- Sidelink indication with rx ind to trigger send SL-MIB to MAC
- Enable Scope for PSBCH use -d or --dqt
- Enable system testing of PSBCH for example using RFSIMULATOR:
- UE1 is a SYNCRONISATION SOURCE UE which transmits PSBCH
started using command -
sudo ./nr-uesoftmodem --sl-mode 2 --sync-ref 4 --rfsim --rfsimulator.serveraddr server
- UE2 syncs onto UE1 during sidelink search, gets the timing and continues to receive PSBCH
started using command -
sudo ./nr-uesoftmodem --sl-mode 2 --rfsim --rfsimulator.serveraddr 127.0.0.1
- In the default use case 2 Sidelink SSBs sent over 16 frames.
- In case SL-SSB configuration needs to be changed use -O option in the above command like
-O ../../../targets/PROJECTS/NR-SIDELINK/CONF/sidelink_preconfig_1txpool.conf
Till this commit, the UE gets the position of SSB in frequency from
command line and does the syncronization by locating the SSB in time. It
does this by generating a PSS time signal during initialization with the
SSB offset given via command line. Then PSS detection is done by
correlation.
In this commit, the UE computes a list of GSCN in the current NR band
that falls within the current bandwidth for the set center frequency.
For each GSCN in the list, the UE starts a thread and performs the
following:
1. Generate PSS time signal with SSB offset for current GSCN.
2. Detect PSS, SSS and decode PBCH (this step remains the same).
After all threads finishes, the results are collected.
For now, only the first detected PBCH is used to proceed further. So
this PBCH is indicated to MAC and UE exits initial sync.
Future work: The cell search can be standalone feature where the UE
could scan for SSB in the entire NR band. This would require changing
radio's frequency on the fly as the UE's bandwidth would not cover an
entire NR band. The cell detection can futher be imporved by looking
for SIB1 for each decoded PBCH.
Testing on Neoverse N1 (Ampere 3GHz). Tested only on a subset of phy-simulators.
- Changes:
- use SIMDE consistently
- adaptations of LDPC decoder generator for ARMv8 performance
- SIMDe modifications of Intel CRC to allow for aarch64 build.
optimizations for 128-bit to improve performance of LDPC encode/decode
on aarch64 (Neoverse 1)
- added BG2 files for 128-bit ldpc encoder (aarch64)
- testing on Xeon
- testing on x86
- minor changes to build/run on x86
- change in crc.h after returning to aarch64
- removed some warning in ldpc decoder generator for x86_64
- char
- Delete irrelevant constants
- Correctly declare variables
- Define stdbool for all architectures
- Remove definition of _MM_SHUFFLE and use SIMDE_MM_SHUFFLE
- Remove commented code
- Fix CMakeLists.txt
- Include SIMDE avx2 functions in tools_defs.h
fix the 64QAM modulator case, that process 192 bits per iteration, then 24 bits per iteration of the tail bits, then added the last two symboles processing (no odd number of symbols case)
This function is used during initial synchronization, only.
This typo leads to wrong computation of the OFDM symbol start within a slot, after PBCH decoding.
The result is a time offset and therefore a rotation in frequency domain for the initial PDCCH and PDSCH (SIB1) reception.
1. Adding a "SL" frequency for Sidelink mode. The
importance of this variable is to ensure that
when we are in mode 1 (UE+UE+gNB), that the slot
configuration and frequencies do not overlap. This
SL frequency is important for rotation and allows
us to utilize the OFDM modulation and demodulation
functions that already exist in OAI.
2. Adding sl_mode to the command line for proper UE
deployment when in SL mode. sl_mode can be set to 0,
1, or 2. sl_mode 0 indicates no-Sidelink at all,
mode 1 is gNB, UE, and UE (3GPP defines mode numbers).
sl_mode 2 indicated UE to UE communications with no
gNB at all.
3. New functions for calculating the carrier frequency
for SL mode.
This commit includes changes to the function
footprints for vaiours NR UE and gNB functions.
It does not updated the LTE code. For functions
shared by both LTE and 5G, we maintained the original
LTE footprint and argument structure.
Several of the simulators that use these functions
have been updated as well. The specific usage of these
functions which index into the int32_t buffers and
treat the first int16_t and the real and the second
as the complex should be modified in the near future.
Raghavendra Dinavahi