for FR2 offsetToPointA is expressed in terms of 60 kHz SCS and k_SSB expressed in terms of the subcarrier spacing provided by the higher-layer parameter subCarrierSpacingCommon
Fix for CI runtime error: left shift of 1 by 31 places cannot be represented in type 'int'
Fix for CI runtime error: left shift of 128 by 24 places cannot be represented in type 'int'
PUSCH decoding is started multiple times in nr_ulsch_procedures() for
each ULSCH segment, and stopped once inside
phy_procedures_gNB_uespec_RX(). Not only is it not clear if that works
with the API, it also might measure more than just PUSCH decoding.
Remove the PUSCH decoding, it is misleading. Check L1 RX processing
instead.
This commit introduces a separate thread (l1_tx_thread) that processes
gNB DL/TX slots. It receives a message from the ru_thread when a new
slot started, and starts processing.
The DL part of the scheduler is run in the l1_tx_thread. Therefore,
only call UL indication (for scheduler) in UL slots. The UL indication
previously triggered the DL scheduler -- hence, it had to be called in
every slot. Now, since the DL scheduler is moved into the DL thread, we
don't have to call the scheduler in every slot anymore.
The reorder thread is removed, as reordering with this scheme is not
necessary anymore.
The main advantage of this version is that the TX can be scheduled
earlier (sl_ahead). Further, there can no longer be race conditions in
the TX path, since the scheduler/L2, TX L1 processing and the RU tx
function are all execute in the same thread (L1_tX_thread).
Also, the scheduler prepares PRACH/PUSCH/PUCCH FAPI PDUs. As of this
commit, the scheduler runs in the TX processing chain, whereas these
PDUs are destined for RX processing. Thus, too avoid data races,
instead of triggering the RX processing at the same time as TX
processing in the RU thread, this commit changes the code to trigger RX
processing after the scheduler has been run in TX processing to avoid
data races.
Finally, we synchronize RU and L1 threads. This is important for
rfsimulator, since unlike most radios, rfsimulator can run slower or
faster, depending on I/O and CPU (it does not have a stable "tick").
Co-authored-by: kiran <saikiran@iitj.ac.in>
Reformat code to properly copy memory if we skip precoding.
precoding_stats timing is not part of ru->feptx_ofdm, but
ru->feptx_prec, so always print it.
Previously, in order to speed up processing if precoding is disabled, we
just copy the pointer from txdataF to txdataF_BF, as opposed to do a
full memcpy() to duplicate the data. The same happens if we cannot have
precoding, i.e., in SISO. This has implications such as memory leaks,
which is why this is not being done. However, the code comment is
intentionally placed there.
For 7.2 FH, some RUs do phase compensation, whereas for others, the DU
does it. In fact, this can be "negotiated" using the M plane. Since we
don't have the M plane yet, add a configuration option to set where
phase compensation is performed.
remove several unused files
remove mem_block_t that is never used in a different way than a simple heap buffer
move up IP address type and remove duplications of the same struct declaration
- avoid the finction duplication
- add the transform predoding to the nr_rx_pusch_tp
- add the MMSE for 2 layer which modulation greater than 16 qam
- can support to 256 qam for 1 layer and 2 layer
1. Adding a "SL" frequency for Sidelink mode. The
importance of this variable is to ensure that
when we are in mode 1 (UE+UE+gNB), that the slot
configuration and frequencies do not overlap. This
SL frequency is important for rotation and allows
us to utilize the OFDM modulation and demodulation
functions that already exist in OAI.
2. Adding sl_mode to the command line for proper UE
deployment when in SL mode. sl_mode can be set to 0,
1, or 2. sl_mode 0 indicates no-Sidelink at all,
mode 1 is gNB, UE, and UE (3GPP defines mode numbers).
sl_mode 2 indicated UE to UE communications with no
gNB at all.
3. New functions for calculating the carrier frequency
for SL mode.
Provides the backoff from full-scale output at the L1 entity
(frequency-domain samples). Default is, 36 dBFS, which is the correct
value when using the OAI RU entity. For O-RAN RU, this value should be
set according to the O-RU manufacturer requirements. For example 12
would corresponding to 14-bit input level (6 dB/bit).
Applies the TX amp backoff to PBCH, PDCCH and CSI
reorder_thread_disable we use the native message queue and L1_rx_thread instead of the thread-pool for the main L1 thread. There is a single TX thread (no slot parallelization)
This commit fixes a bug caused by global variables in the gNB_MAC_INST
structure used to transfer MAC scheduler's results to the PHY layer.
When using several threads in the PHY layer, it may happen that the
MAC scheduler is called a second time by the second PHY thread for the
next slot before the content of the global variables in the gNB_MAC_INST
structure used to store the result of the MAC scheduler for the current
slot have been consumed by the first thread, leading to unpredictable
results (all of them certainly wrong).
The solution is to introduce a small memory management module for the
interface between the PHY threads and the MAC scheduler. The MAC
scheduler now fills the data structures passed to it, and not a
global variable anymore. The PHY layer manages the structures and
ensures that no data is overwritten before being fully consumed by
the various threads of the PHY layer.
Some care has to be taken because several PHY threads will access the
same structures at the same time for a given slot (in read mode, so
it's okay). A mechanism of reference counting has thus been introduced.
Only one CC is supported. This restriction should not be too hard
to remove if/when needed. (The code before this commit does not seem
to work for more than one CC anyway.)
This commit includes changes to the function
footprints for vaiours NR UE and gNB functions.
It does not updated the LTE code. For functions
shared by both LTE and 5G, we maintained the original
LTE footprint and argument structure.
Several of the simulators that use these functions
have been updated as well. The specific usage of these
functions which index into the int32_t buffers and
treat the first int16_t and the real and the second
as the complex should be modified in the near future.
Robert Schmidt