SSB position in burst is set to 2 so only SSB index 1 is transmitted.
prach_msg1_FDM is set to 1 so there are two occasions per time slot.
All the UE connecting to gNB will receive SSB index 1 and trigger PRACH
in the second FDM prach occasion.
We use Aerial exclusively on ARM/gracehopper, so no need to build it on
x86. On this occasion, rename the "kind" (ID which images to build) to
x86 for clarity and align with the other "kinds" (build_cross_arm,
native_armv9, ...).
CORESET start multiple of 6 fix
According to the standard any CORESET (except CSET0) would always start
from the first common resource block index which is multiple of 6 in the
BWP. This was not taken into account in the code. The BWP switch CI test
is modified to test a BWP start not multiple of 6.
An exception is the case where rb-Offset-r16 parameter is set, but can't
be used at gNB for FAPI compatibility.
Closes: #1037
vrtsim: Optimize channel modelling
Optimization pass for channel modelling on transmission in vrtsim. This
comes from a requirement of O-RU to perform channel modelling with minimum
latency. The latency measured in O-RU 4TX 2RX on the UE is lowered from
~400 uS to ~100uS.
- Reduced MAX_CHANNEL_LENGTH to 200 and introduced SAVED_SAMPLES_LEN
- Refactored channel modelling actor allocation to parallelize work better
- Improved batching and task creation for channel modelling
- Replaced static global saved_samples with local static buffer in vrtsim_write_with_chanmod
Create a new CI pipeline for testing with vrtsim on Gracehopper:
https://jenkins-oai.eurecom.fr/job/RAN-VRT-Sim-Test-5G/
CI: adjust UE attach timeout handling
This modification addresses an issue in the RFSim-5G 2x2 test where the UE
often fails to attach within the initial 20s window. The timeout may cause
the UE to restart, which leads to two UEs appearing in the gNB log. By
increasing the initial timeout to 40s, we avoid unnecessary restarts.
- Set default attach_timeout to 40s
- Increase timeout only after failed attach attempts
This modification addresses an issue in the RFSim-5G 2x2 test where the UE
often fails to attach within the initial 20s window. The timeout may cause
the UE to restart, which leads to two UEs appearing in the gNB log. By
increasing the initial timeout to 40s, we avoid unnecessary restarts.
NR UE: calculate TA based on SIB19 information in NTN mode, if autonomous TA is not enabled
To achieve the goal, the hyper frame number (HFN) is introduced at the NR UE
PHY, MAC and RRC layers.
Besides this, we also implemented an orbit propagation to improve the accuracy
of N_UE_TA_adj, and a fix to keep the N_TA from RAR and MAC CE.
Fixes#981
Fixes for BWP switching
This MR fixes some issues when performing BWP switching via
reconfiguration. It also adds a CI test for BWP switching. # Please
enter a commit message to explain why this merge is necessary,
Testing has revealed that if PDCP drops some packets, the scheduler
falls behind with handling Slot.indication. It could be that we don't
have enough cores, which was reduced previously (from total 8 -> 2).
Reincrease to four cores to have a bit more headroom.
See-also: a18a4888ec ("Change number of cores used for OAI gNB from 8 to 2")
CFRA: mark RA complete when sending Msg2
The current contention-free random access forces a "Msg3" (which does
not exist in CFRA) to be received by a UE. Sometimes, this "Msg3" is not
received (for whatever reason), and the MAC declare that RA failed.
This is problematic, as the spec says that RA is complete once Msg2 is
received by the UE. Since the gNB cannot know when this is, simply mark
it as complete once we sent Msg2.
We still send Msg3 in CFRA, which is explained further in the commits.
Also, improve logging and stabilize an RFsim test by reducing sl_ahead.
CI: Reduce the tries to attach the UE in CI runs
The goal of this MR is to save time in CI runs by reducing the UE attach tries
to 3 instead of 4 and UE timeout to 20 seconds, which will be incremented after
each fail, instead of 60 seconds.
CI build analysis: print log file errors
The generated HTML from CI builds so far only shows the number of errors, but
not the errors themselves. This is inconvenient, as this means that developers
have to go to the logs.
This commit modifies AnalyzeBuildLogs(), which already iterates the entire file,
to store the lines containing "error:" (as it would be emitted by a compiler).
The callers of AnalyzeBuildLogs() now also print the analysis outcome in a more
concise manner.
Also, change the return parameter of AnalyzeBuildLogs() to a tuple to make the
variable handling easier, and remove the unused warnings list.
Fix DRB integrity failures during handover and re-establishment
This MR fixes DRB integrity protection failures that occur during N2 handover
and connection re-establishment scenarios. The issues were caused by incorrect
security key handling and ciphering configuration during these procedures with
DRB integity enabled.
See merge request !3767 for more details.
This change updates the NSA-B200 CI pipeline to guarantee that the EPC is
properly terminated regardless of pipeline success or failure. This avoids
leaving EPC processes running after failed test.
The generated HTML from CI builds so far only shows the number of
errors, but not the errors themselves. This is inconvenient, as this
means that developers have to go to the logs.
This commit modifies AnalyzeBuildLogs(), which already iterates the
entire file, to store the lines containing "error:" (as it would be
emitted by a compiler). The callers of AnalyzeBuildLogs() now also print
the analysis outcome in a more concise manner.
Also, change the return parameter of AnalyzeBuildLogs() to a tuple to make
the variable handling easier, and remove the unused warnings list.
Jaroslava Fiedlerova