- Reorder the logical channels based on priority
- Handling of configuration and release of logical channel bearer
- Add changes in the implementation of lcp procedure for equal priority logical channels
- Restructure the lcp parameters as a separate structure
- Further code clean up
This is a workaround for a problem described in #706. In short, we
cannot reuse the cu_add/remove_f1_ue_data() functions if we are in an
integrated CU-UP/CP ("CU"), but then we can also not reliably use
different UE IDs in CU-UP and CU-CP (except if using even more hacks).
Before this commit, as visible in the handler of an F1 UE release, it
can happen that we forward the RRC Release message to a UE and start the
release timer, while also removing the F1 UE data (containing e.g., the
CU UE ID). This can lead to asserts, since there might still be
subsequent traffic for such UE during a short time, while the DU does
not have the secondary UE ID stored anymore.
This commit changes the logic. It introduces function
nr_mac_release_ue() that removes the UE at MAC and RLC, frees the F1 UE
data (if applicable), and sends the complete, after timing expiry. If
the UE is out of sync, this function is used to free the UE immediately.
This fixes#685 and #698.
- Set the correct QoS flow ID to associate a correct QoS flow to the
bearer: the UE would misassociate otherwise
- Set the DRB as the default: the handler applies bool with true==1, so
use bool value
Before this commit, the DMRS_UplinkConfig was stored in a separate
DMRS-related structure, although it is always referenced in the
PUSCHConfig of the current UL BWP.
Through certain code paths (e.g., retransmission), it could happen that
an old DMRS_UplinkConfig was accessed that was freed (through new
CellGroupConfig).
In this commit, we always look up the DMRS_UplinkConfig in the current
PUSCH config, which should always be up to date.
PDU Length is as per SCF 222.10.02: The total length (in bytes) of the
PDU description and PDU data, without the padding bytes. From
TX_DATA.request we get 8 (2 bytes PDU_Length + 2 bytes PDU_Index + 4
bytes num_TLV ) and from each TLV we get 4 + value size ( 2 bytes tag +
2 bytes length + value size without pading)
Therefore, add function to compute PDU_length() value for
TX_Data.request, taking into account how many TLVs there are.
compute_PDU_length() does not rely on access to `nfapi_nr_pdu_t`.
Put it into nr_mac_common.c to avoid introducing dependencies.
sriharsha