* nb_nr_inst represents the number of gNB instances and the number of RAN contexts
* it used also to count the number of RRC instances in the node
* it is set from config file in NRRCConfig, therefore redundant checks after
this function have been removed
* redundant global variable NB_gNB_INST, set after nb_nr_inst, was removed
* gNB and L1 init is done in init_gNB and RCconfig_NR_L1
* moved RCconfig_nr_prs out of create_gNB_tasks for consistency
* do RCconfig_nr_prs only for L1 instances
This commit removes many logs that just show memory addresses, indices,
etc., which, I presume, do not mean anything to the "average user" and
developers alike.
Currently, NR PDCP ticks are active only with monolithic gNB, triggered by the MAC scheduler in gNB_scheduler.c.
In F1 split mode, as there is no MAC, there’s no source to advance the NR PDCP timer via "nr_pdcp_wakeup_timer_thread()".
This commit introduces a dedicated thread for NR PDCP ticks in gNB-CU and CU-UP mode.
Without it, packet losses at the F1 uplink would cause indefinite buffering, as t-Reordering won't expire due to the lack of NR PDCP timer ticks.
A new phy scope based on ImGui and ImPlot. This scope uses a different concurrency model than previous
scopes.
The PHY thread writing the data first checks if the data is ready to be written. If its not, nothing is copied.
The GUI thread reads data if available and marks it ready to write. This makes sure that the PHY threads are not
busy copying data that would never be displayed.
Some of the scopes also have a freeze functionality that further limit the amount of data that needs to be copied
from PHY threads. If a scope is "frozen" it still allows the user to explore the data using plots zoom/pan functions
but doesn't cause PHY threads to perform extra writes on the displayed data.
A compile option was added to enable/disable the scope. Use cmake -DENABLE_IMSCOPE=ON to enable the scope.
Update CXX standard to 17; it is required by some libraries (e.g., dear imgui). The oldest gcc version in
use by a distribution supported is Ubuntu 20, which has gcc 9.4 with c++17 support.
Before this commit, the following will trigger a complete rebuild:
- create another git name (git checkout -b test)
- run cmake again manually (cmake ..)
- run ninja again
The top-level CMakeLists.txt uses add_definitions() to add git
information to all targets; if some git information changes, this will
mark all command lines as dirty, triggering the build.
There is an easy solution: instead of passing this information on the
command line, pass it in a header. This commit uses configure_file() to
generate a file oai_version.h in the build directory with the same
information. Various sources files, e.g., main executables, use this to
output the same information as before. It is then also not necessary to
use header guards, as cmake takes care to create this file.
If cmake is re-run, it will update the header, and trigger only files
including this header will be rebuilt (which can be shown with the above
stpes). The information passed is the same as before, and updates the
information when the old method would have updated it.
* In LTE there is logic that checks the thread configurtion with the
getters `get_thread_parallel_conf()` and `get_thread_worker_conf()`
in NR these getters are not used, only setters, which have no impact
* strdup is returning a malloced string which needs to be freed after use
> Direct leak of 90 byte(s) in 1 object(s) allocated from:
> 0 0x7ffff745b9a7 in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:454
> 1 0x5555591598a3 in main /executables/nr-softmodem.c:667
> 2 0x7ffff5e29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
Remove netlink code, and the PDCP_USE_NETLINK macro, as there is no
known use, it makes the code more complicated, and is simply "technical
debt".
In 4G PDCP, a subtle change has been introduced, in pdcp_module_init()
of pdcp.c. Looking at the diff of this commit, it can be seen that there
is now a new "else-if (ENB_NAS_USE_TUN_W_MBMS_BIT)" branch that is under
what was the "if (PDCP_USE_NETLINK)" branch, while the code fragment was
actually inside the "else" branch of PDCP_USE_NETLINK. This seems to be
necessary: previously, if we did not use noS1 mode and we don't use any
TUN (i.e., the eNB), the else block would set up this interface. It is
important that this interface is brought up, because if we omit it,
RFsim will not work. It seems to me that this interface will regularly
create some traffic; without it, RFsim will be blocked, and the UE
cannot connect.
In short, it seems to be important to have the MBMS interface, which
injects traffic in the RFsim side, which will unblock RFsim. The change
in pdcp_module_init() preserves the total changes of the if-else
(PDCP_USE_NETLINK).
making aerial shm prefix configurable (so we can use muliptle VNFs per PNF)
making the nvipc thread affinity configurable and using threadCreate.
removing aerial_vnf_nr_aerial_p7_start_thread
SYS_NICE is a capability that allows a process to set thread affinity
and priority, among other things (see capabilities(7) for more info).
In this commit, add a function that allows to determine if the process
has this capability, and try to change the thread affinity and priority,
if requested. If the capability does not exist, the function will simply
not attempt to change the corresponding thread attributes.
To determine if the process has SYS_NICE, libcap can be used. However,
it might not be installed by default. To avoid requiring another
dependency, if we detect that libcap is not present, use a workaround by
try to set a real-time scheduling policy; if it's present, or can be
changed, we assume that the process has SYS_NICE (and clean up, if
relevant).
Simplify reading of capabilities
set_latency_target() attempts to set keep "low latency" by
- writing a specific latency to /dev/cpu_dma_latency
- setting manually the minimum CPU processor frequency to be the maximum
There is no functionality to undo this after stopping the softmodem(s),
and most users are probably not even aware that OAI does this. It is
generally preferable to set this beforehand using a governor or by
disabling sleep states (as outlined in the tutorial, and in a follow-up
commit in the performance tuning docs).
The previous mlockall() call, to lock memory to RAM, is retained in a
new function. There were additional mlockall() calls, which have been
replaced with lock_memory_to_ram(), where necessary.
There is already a command line option called 'ue-scan-carrier' which
seemed to blindly look for SSB by changing the center frequency by
+/-100Hz if the previous attempt failed. This is probably copied from
LTE and is not suitable for NR. This commit uses this option to either
1. Perform initial sync on one GSCN if the SSB position if known
2. Or scan the all GSCN (if the SSB postion is unknown)
Also, the following is done for re-synchronization
1. Scan all GSCN when UE comes back from IDLE state
2. Scan one GSCN when UE does re-estabishment
Removed dependency of lte-softmodem.h in nr-softmodem.c.
CONFIG_HLP_UESCAN is declared also in lte-softmodem.h.
They use 4G NUMBER_OF_UE_MAX, which is not supposed to be present in 5G.
Further, the mutex and variable are global state; for Paging, we should
use F1.
- deleted: ../../../executables/rfsim.c
- removed unused command line options to set SINR and SNR
- removed unused functions to get SINR and SNR
- removed unused RFSIM struct members
This commit introduces an additional (implicit) option that signals if
the E2 agent is to be activated or not. When reading the configuration,
we now check if all fields are set, and activate the E2 agent only if
this is the case. If not, we only print a warning and start the gNB
without the agent.
Note that previously, if not all fields are set correctly, the gNB
stopped.
To implement this behavior, it is necessary to change the defaults of
the RIC IP and the directory for SMs to a (non-NULL) default value.
Otherwise, the configuration system would not consider the field to be
set to the default, and wrongly assumes the field is set, even though it
is not; at least, this change is necessary to make config_isparamset()
return NULL if the configuration is not set.
Guido Casati