Think: NR with different number of slots per frame depending on mu.
The name 'subframes_per_frame' is a bit ambiguous. It is valid for LTE,
but for NR it should be 'slots_per_frame'.
For example, for sub-carrier spacing of 30KHz, we have 20 slots per
frame, so in this case subframes_per_frame = 20. In reality whatever
the numerology, there is always 10 subframes per frame in NR.
But how to name this variable which is used both for LTE and NR cases?
'subframes_or_slots_per_frame'? It's a bit long and also ambiguous.
Conclusion: no big deal I think. 'subframes_per_frame' and so be it.
The CI fails sometimes, because some processes/threads are created in
unpredictable order and if the client connects before the server is
ready some tests fail, as seen in the following log:
[UTIL] client/server iq-samples: launch sub-processes
[UTIL] threadCreate() for time client: creating thread (no affinity, default priority)
[UTIL] time manager configuration: [time source: server] [mode: client] [server IP: 127.0.0.1} [server port: 7374]
[UTIL] time client: connection to 127.0.0.1:7374 failed, try again in 1s
[UTIL] threadCreate() for time source iq samples: creating thread (no affinity, default priority)
[UTIL] threadCreate() for time server: creating thread (no affinity, default priority)
[UTIL] time manager configuration: [time source: iq_samples] [mode: server] [server IP: 127.0.0.1} [server port: 7374]
[UTIL] client/server: rlc ticks: 1000 pdcp ticks: 1000 x2ap ticks: 1000
CMDLINE: "/oai-ran/build/common/utils/time_manager/tests/test_time_manager_auto" "--time_management.mode" "server" "--time_management.time_source" "iq_samples"
[UTIL] client/server: rlc ticks: 0 pdcp ticks: 0 x2ap ticks: 0
CMDLINE: "/oai-ran/build/common/utils/time_manager/tests/test_time_manager_auto" "--time_management.mode" "client"
[UTIL] client-server iq-samples: ERROR
The client/server iq-samples test is started.
Then we see this log:
[UTIL] time manager configuration: [time source: server] [mode: client] [server IP: 127.0.0.1} [server port: 7374]
Which means that the client is running.
It tries to connect to the server (not running yet), but fails, so sleeps
for 1 second before attempting another connection to the server:
[UTIL] time client: connection to 127.0.0.1:7374 failed, try again in 1s
The sleep is done by the time_client thread, the main thread of the test
program continues and does a sleep(1).
Then the server arrives:
[UTIL] time manager configuration: [time source: iq_samples] [mode: server] [server IP: 127.0.0.1} [server port: 7374]
It sends all the ticks (to no client, since the client is still sleeping).
Then the test is over, the sleep(1) of the client finishes and the program
exits. The client never connected to the server.
We have this log:
[UTIL] client/server: rlc ticks: 0 pdcp ticks: 0 x2ap ticks: 0
And the test fails.
It's complicated to write an automatic test involving several uncoordinated
programs. The operating system may create processes in any order. We use
some sleeping to wait, but it may be too short or too long, leading to test
failure.
Let's see with more sleep if the CI fails less.
Add a CU-UP load tester and improve GTP performance
This adds a simple tester program for the CU-UP. It sets up a number of
UEs/bearers in the CU-UP via the E1 interface, then streams data in
downlink/uplink (as seen by the CU-UP). More information is available in
tests/nr-cuup/README.md.
Includes some fixes to properly verify that SCTP is installed, and use
"the right cmake way" to use it in cmake code (see commit for details).
simplify and make more local variables in nr_rx_pdcch() and fix small bugs...
simplify and make more local variables in nr_rx_pdcch() and fix small bugs
(size 9 RE instaed of 12 RE)
T hacks: add new tracer ant0 and a tool to plot ofdm data from usrp or rfsim
(output or input)
The tool ant0 dumps IQ data to a file (or stdout) as float complex or short.
It is needed for a student's project. (Well, we could use record/extract, but
it's simpler.) The tool ofdm-plot is used to plot output or input signal from
gnb in the frequency domain. May be useful to debug, why not.
Fix Dedicated BWPs
- Improve SearchSpace selection
- Improve CORESET selection
- Fix fill 'initialDownlinkBWP->pdsch_Config' when there are
DedicatedBWPs
* This fixes the reported 'RSRP = 0' issue when the UE is in the
InitialBWP and we have DedicatedBWPs configured
- Add a 'common' type SearchSpace in the NR_BWP_DownlinkDedicated IE for
DedicatedBWPs
- Fix hardcoded 'controlResourceSetId' by making it dynamic
- Remove 'searchspaceid' from 'verify_agg_levels' function because it
was used only for LOG
- CI: Add DedicatedBWP to '40 MHz TDD F1+E1 SA' in
'RAN-SA-B200-Module-SABOX-Container'
Synchronized Real-Time Data Recording Application Addition
The main Features of Synchronized Real-Time Data Recording Application:
- The Data Recording Application runs in parallel to the gNB or UE
server or in another server as Data Recording or Data Lake Server
- It makes use of (an extended version) of OAI’s T-tracer framework
- It communicates with base station, and user terminal
- It synchronizes and combines data traces and control information
(meta-data) from Base station and User terminal into consistent SigMF
data sets
Details on implementation addition:
- T_tracer Extension to Support up to 35 Parameters in the T() macro
- Add traces on gNB PHY UL and related requirement: FD PUSH IQ, FD DMRS, and UL Channel estimates wi/wo interpolation, and Rx Payload bits:
1. The required memories have been created and initialized in:
openair1/PHY/NR_TRANSPORT/nr_ulsch_demodulation.c
2. Those memories: memory for DMRS signals, memory for channel
estimates based on DMRS positions, memory to store slot grid with
channel coefficients based on DMRS positions after interpolation,
and memory to store extracted data including PUSCH + DMRS.
3. The input parameters to nr_pusch_channel_estimation() has been
updated to get the pointer to the added memories of
pusch_dmrs_slot_mem and pusch_ch_est_dmrs_pos_slot_mem
(openair1/PHY/NR_ESTIMATION/nr_ul_estimation.h)
4. The DMRS grid of NR slot and the estimated channel coefficients at
DMRS locations are logged to created memories in:
openair1/PHY/NR_ESTIMATION/nr_ul_channel_estimation.c
5. The function inner_rx in
openair1/PHY/NR_TRANSPORT/nr_ulsch_demodulation.c is updated to log
the extracted ULSCH PRBs and the interpolated channel coefficients.
6. The T-macro() has been called in
(openair1/PHY/NR_TRANSPORT/nr_ulsch_demodulation.c) to trace added
traces: T_GNB_PHY_UL_FD_DMRS, T_GNB_PHY_UL_FD_CHAN_EST_DMRS_POS,
T_GNB_PHY_UL_FD_PUSCH_IQ, T_GNB_PHY_UL_FD_CHAN_EST_DMRS_INTERPL
- Add traces on UE PHY UL and related requirement: Tx Scrambled bits and Tx payload bits
1. Update input parameters to nr_ulsch_encoding () in
nr_transport_proto_ue.h to get number_dmrs_symbols to be added to
meta-data.
2. In nr_ulsch_coding.c: Trace UE PHY UL Payload TX bits (T_message:
T_UE_PHY_UL_PAYLOAD_TX_BITS) including related meta-data and UTC
time.
3. In nr_ulsch_ue.c: Trace UE PHY UL Scrambled TX bits (T_message:
T_UE_PHY_UL_SCRAMBLED_TX_BITS) including related meta-data and UTC
time.
4. Fix the input prameters in nr_ulsch_encoding () called in
(openair1/SIMULATION/NR_PHY/ulschsim.c) since a new input parameter
has been added.
- Add Data Collection Services (T-Tracers for gNB and UE)
1. Add _tracer_app_gnb and t_tracer_app_ue apps to common/utils/T/tracer/Makefile
2. Add Data collection Service for gNB: common/utils/T/tracer/t_tracer_app_gnb.c
3. Add Data Collection Service for UE: common/utils/T/tracer/t_tracer_app_ue.c
- Add Shared memory configuration
(common/utils/T/tracer/shared_memory_config.h), since we will have too
much memory consumption on the stack if the T-tracer is not fast
enough to process the traces or if we have too much traces. As a
result, tracers start to capture data, write data in shared memory,
then close the T-Tracer after getting the recording of N slots. The
Data recording App will read data from the shared memory.
- Add Main app of Data Recording Application v1.0 including: Config
files, SigMF Interface, Config Interface, Sync Service, and def
messages: The data recording App includes mainly the following files:
1. The main app: data_recording_app_v1.0.py that has the data control
service, interact with tracers, data sync and conversion service.
2. The configuration file:
common/utils/data_recording/config/config_data_recording.json
3. The wireless dictionary file:
common/utils/data_recording/config/wireless_link_parameter_map.yaml
4. Config Interface
(common/utils/data_recording/lib/config_interface.py) that reads
the configuration for both gNB and UE.
5. Sync interface (common/utils/data_recording/lib/sync_service.py)
that sync captured data for gNB and UE before saving them in SigMF
format
6. The SigMF Interface
(common/utils/data_recording/lib/sigmf_interface.py) to store
recorded data and meta-data in SigMF format
7. A simple script
(common/utils/data_recording/sync_validation_demo.py) to validate
that the recorded bits from gNB and UE are in Sync
- For more info look to doc/data_recording.md
The data recording App includes the following files:
- The main app: data_recording_app_v1.0.py that has the data control service, interact with tracers, and data sync and conversion service
- The configuration file: common/utils/data_recording/config/config_data_recording.json
- The wireless dictionary file: common/utils/data_recording/config/wireless_link_parameter_map.yaml
- The SigMF Interface (common/utils/data_recording/lib/sigmf_interface.py) to store recorded data and meta-data in SigMF format
- A simple script (common/utils/data_recording/sync_validation_demo.py) to validate that the recorded bits from gNB and UE are in Sync
- For more info look to doc/data_recording.md
A squashed commit further updates:
- Enhance Data Recording App structure
- Support the new state machine of T-Tracers
- Add new files for Config Interface, sync Service, def of data recording messages, and common utilties
- Make part of logging on Terminal configurable
- Add _tracer_app_gnb and t_tracer_app_ue apps to common/utils/T/tracer/Makefile
- Add Data collection Service for gNB: common/utils/T/tracer/t_tracer_app_gnb.c
- Add Data Collection Service for UE: common/utils/T/tracer/t_tracer_app_ue.c
- Add Shared memory configuration (common/utils/T/tracer/shared_memory_config.h),
since We will have too much memory consumption on the stack if the
T-tracer is not fast enough to process the traces or if we have too
much traces. As a result, tracers start to capture data, write data in
shared memory, then close the T-Tracer after getting the recording of
N slots
- Support the operation of : COnfig, Record, and Stop
- Poll from Socket and not use get_events to mitigate long-time waiting
if there is no data in buffer or the UE is already released or crashed
- Add extra offset to improve data sync
Measurement gaps
Scheduling measurement gaps to provide sufficient time for the UE to
re-tune its transceiver to the target carrier, complete the set of
measurements and then re-tune its transceiver back to the original
carrier.
Cleanup PDU Session Handling in RRC/NGAP
Currently, NGAP and RRC share the same structures and responsibilities when
handling PDU Session information: this creates tight coupling, redundancy, and
makes the code harder to maintain.
- NGAP should be responsible only for: Protocol-specific encoding/decoding
(3GPP TS 38.413)
- RRC should own: PDU Session handling and storage in the UE context
This MR is the first step in a broader refactoring of the PDU Session handling
code across NGAP and RRC layers, with the goal of splitting responsibilities
cleanly between both modules.
- Unified gtpu_tunnel_t for tunnel endpoint config (formerly f1u_tunnel_t)
- Refactored and relocated PDU Session struct definitions for better separation
between NGAP and RRC
- Moved pdusession_t for PDU Session handling out of NGAP, now defined and
managed by RRC only
- Defined 3GPP TS 38.413 message-specific structs in NGAP module
- NGAP now decodes NGAP PDU Session Resource Setup/Modify IEs and transfers
decoded data to RRC via ITTI
- Add helper functions to copy from NGAP message to pdusession_t
- Introduced new encoders/decoders/helpers in NGAP for handling PDU Session
Resource Setup/Modify procedures (e.g. decode_pdusession_transfer)
- Migrated to NGAP and removed duplicated logic for QoS information decoding
(fill_qos)
- Improved logging of GTP tunnel info
- Merged redundant functions (f1u_dl_gtp_update and f1u_ul_gtp_update)
- Removed unused code and obsolete types
- do free_func in seq_arr_erase_it on the provided range and updated unit test
- Other fixes and simplifications (e.g. simplified and clarified naming of
tunnel/session parameters and structs)
This cleanup improves code readability, has a high code churn (the deletions are
~159.7% of the insertions) and prepares for better modularity before the
refactoring of PDU Session handling in RRC/NGAP.
This struct is used in different layers, e.g. RRC, NGAP: therefore it
has been moved to platform_types.h.
Also, the struct holds the tunnel endpoint configuration for any GTP-U
tunnel, therefore the f1u prefix is not accurate and was updated
to a more generic gtpu.
The seq_arr_erase_it function was modifying start_it during the free_func loop,
which led to incorrectly apply the free_func on the whole array.
This commit makes sure the elements "freed" are only those in the range and not the whole seq_arr.
* Fixes the logic by introducing a temporary iterator for the free loop,
preserving start_it and end_it for correct offset calculations.
* Adds a regression test in test_seq_arr to verify that only the selected
subrange is erased and that free_func is called exactly on that range.
Fix various bugs and inconsistencies in config read, SCTP, ITTI, GTP
Fix bugs across various layers, mostly layer 3, including memory leaks.
See the commits for more details.
This printf just shows which config sections are being read, but this
has no useful information for a user. It was introduced in 7731f5bd2d
but was not present prior to this commit, either.
YAML related updates
- Add common function config_common_getdefault
- Handle exceptions from the yaml-cpp library, transform them into
understandable errors written to stderr
- Add some unit tests.
Add configurable values of NR RLC and NR PDCP to the configuration file
This is for the gNB (the UE gets the values from the gNB).
The physical simulators were also adapted (we put the previously
hardcoded values that were everywhere in the code into the simulators
themselves). I don't think we need to have those values configurable for
the simulators, but I can study the possibility to add this if someone
tells me it's important (if not important I prefer not to do it, I am
not sure if it is trivial to do or not).
The primary motivation here is to remove a VLA, as in the parent
commits. Closer inspection revealed that (1) it is only used by the LTE
UE, and (2) it only logs some data which we likely don't need. So I
simply removed this function.
Cedric Roux