At both the PNF and the VNF, introduce a separate numerology field, and
pass the numerology when converting time information using macros from
nfapi_interface.h. The actually numerology is still hardcoded to 1 (as it
was before), but the follow-up commits will put a suitable numerology.
In both cases, but the numerology next to the frame/slot information.
The next commits will modify the time macros used in the 5G nFAPI code
to handle different numerologies. As a preparation, remove all the
usages of these macros where they really don't matter (e.g., don't
convert if we don't need to).
Introduce ITTI queue in RRC-to-MAC direction
resolve ue rcc to mac race conditions by a itti queue, but it doesn't
resolve the problem of exact slot we should apply the new cell
configurtion
Reduce race conditions through a itti queue, such that RRC-initiated MAC
memory modifications happen at the same time as MAC thread writes.
However, it doesn't resolve the problem of exact slot we should apply
the new cell configurtion.
Cmd line option for sync in frames for iqrecorder
B200 with high clock drift will go out of sync within 280ms which was
the default duration to sync in with iqrecorder. Now this value can be
specified via cmd line so the user can change it according to needs.
SIB19 utilization on UE
Following SIB19 initialization and scheduling on gNB (!2899 - merged)
and Receive SIB19 on nrUE (!2920 - merged), this merge request aims to
introduce the actual use of the SIB19 provided parameters by gNB in UE.
Changes needed for utilization include: initialization of position
coordinates parameters for UE (which are needed to calculate propagation
delay between UE and SAT), propagation delay calculations and timing
advance adjusts. Moreover, this change removes the now unused arguments
for ntn_koffset, ntn_ta_common and ntn_ta_commondrift
UE data race fix
When a new sync request is sent to PHY, we clear harq buffer and start
synchronization process. This could lead to unexpected behavior or segv
because DL actors might be using the buffer we just cleared. To avoid
this, the DL actors are shutdown and re initiated before clearing harq
info.
B200 with high clock drift will go out of sync within 280ms which was
the default duration to sync in with iqrecorder. Now this value can be
specified via cmd line so the user can change it according to needs.
Set the number of barriers to 512 and implement proper slot and frame
based selection. Now the dynamic barriers should not be overwritten in
case the rx-to-tx offset is high. The maximum offset supported is 512.
- Removed ntn_koffset, ntn_ta_common, ntn_ta_commondrift arguments in order to be used directly from SIB19
- Removed global NTN_UE_Koffset variable and it's use
- Introduced getter functions for ntn related parameters
- Added new structure to hold timing advance parameters
- Made SIB19 related calculation to save to this struct
- Modified in ra to get ta struct values
Move handling of sync request from MAC from UE_dl_preprocessing(). This
will process the sync request before receiving the samples of current
slot from radio so we don't 'lose' the slot.
- removed some whitespace noise.
- cleaned up CMakeLists.txt
- reintegrated task_manager.c into thread-pool.c
- cleaned up some unnecessary code
Co-authored-by: Cedric Roux <cedric.roux@eurecom.fr>
Co-authored-by: Mikel Irazabal <mikel.irazabal@openairinterface.com>
Update NR UE threading model
This updates the NR UE threading model by preventing calling threadpool
from threadpool and fixes deadlock issues related to processSlotTX. By
making processSlotTX run to completion instead of starting and waiting
for other threads to finish it prevents locking thread pool cores,
therefore prevening deadlocks.
There is a slight difference here compared to the previous version where
I do not use the UL actor as I believe it is not necessary,
processSlotTX satisfies the run-to-completion requirement now. If in the
future any UL procedure would be parallelized using the thread pool it
should either be done in a run-to-completion model or the processSlotTX
function should be taken off the thread pool.
The documentation has been updated.
Implement run-to-completion for processSlotTX. This is achieved by using a new
dynamic_barrier_t which allows to specify callback after the first join has been
made.
This commit enables the optional use of Tracy for profiling NR UE & gNB.
See https://github.com/wolfpld/tracy/releases/tag/v0.11.1 for details.
How to compile:
use -DTRACY_ENABLE=ON to enable instrumentation and sampling
For gNB currently only sampling is implemented.
How to collect data:
- Windows hosts: tracy-profiler.exe in link above
- Linux hosts: Compile tracy-profiler from source
Enabling collection from docker:
- open port 8086
- to collect cpu data
--privileged
--mount "type=bind,source=/sys/kernel/debug,target=/sys/kernel/debug,readonly"
--user 0:0
--pid=host
How to add instrumentation:
- See examples in this commit or manual in the link above.
Add a new scope data source (ueTimeDomainSamples) which provides time domain samples
for antenna 0 to the scope. Add graphical representation of the data in imscope.
Removed C-define from ENABLE_IMSCOPE cmake option, the #define was unused and this way
code does not have to be recompiled when imscope enable state changes.
Experiments did show that the time sync is less stable in terrestrial mode if the integral part of the PI controller is used.
So set it to 0.0 by default. For NTN LEO use case we can still use it by providing the command line parameter --time-sync-I 0.2 .
fixes#846
Robert Schmidt