This document contains documentation for the 5G RRC layer, destined towards developers. It explains the basic working of the RRC, and various UE procedure schemes (connection, reestablishment, handover) including their interworking with other layers. User documentation, such as general configuration options, are described in [a separate page](./rrc-usage.md). [[_TOC_]] ## General 5G RRC is basically an ITTI message queue with associated handlers. It sequentially reads received ITTI messages and handles them through the function `rrc_gnb_task()` (constituing the thread entry point function). In this function, one can see three main groups of messages in a big switch statement: - NGAP (messages starting with `NGAP_`) - F1AP (messages starting with `F1AP_`) - E1AP (messages starting with `E1AP_`) For each message, a corresponding handler is called. The messages are roughly named according to the 3GPP specification messages, so it should already be possible to find the message in the switch based on a message name in the spec. Note that RRC is inherently single-threaded, and processes messages in a FIFO order. ## Sequence Diagrams of UE procedures The following section presents a number of common UE procedures for connection establishment&control, bearer establishment, etc. The intention is to help developers find specific functions within RRC in the context of these procedures. For more information on message handlers at F1 and E1 layers, please refer to the respective [F1 documentation](../F1AP/F1-design.md) and [E1 documentation](../E1AP/E1-design.md). For more information on these procedures, please also refer to 3GPP TS 38.401 (NG-RAN Architecture Description) and O-RAN.WG5.C.1-v11 (NR C-plane profile). A lot of the following diagrams would show an exchange between CU-CP, DU, and UE, in which the CU-CP forwards an "RRC Message" to the UE via an F1AP DL RRC Message Transfer through the DU, and correspondingly receives the "RRC Message Answer", as follows: ```mermaid sequenceDiagram participant ue as UE participant du as DU participant cucp as CU-CP cucp->>du: F1AP DL RRC Msg Transfer (RRC Message) du->>ue: RRC Message ue->>du: RRC Message Answer du->>cucp: F1AP UL RRC Msg Transfer (RRC Message Answer) ``` To better utilize horizontal space, these exchanges have been collapsed as follows, but should be read as the above exchange: ```mermaid sequenceDiagram participant ue as UE participant du as DU participant cucp as CU-CP cucp->>ue: F1AP DL RRC Msg Transfer (RRC Message) ue->>cucp: F1AP UL RRC Msg Transfer (RRC Message Answer) ``` ### Initial connection setup/Registration This sequence diagram shows the principal steps for an initial UE connection. This can either happen through a _Registration Request_ (e.g., UE connects "from flight mode"), or a _Service Request_ (i.e., UE connects after leaving coverage). Both requests are handled similarly by the gNB, and basically distinguish themselves, from the point of view of the gNB, by having PDU sessions in the NGAP Initial Context Setup Request present (Service Request) or not (Registration Request, with following PDU Session Resource Setup Request procedure). ```mermaid sequenceDiagram participant ue as UE participant du as DU participant cucp as CU-CP participant cuup as CU-UP participant amf as AMF ue->>du: Msg1/Preamble du->>ue: Msg2/RAR ue->>cucp: F1AP Initial UL RRC Msg Tr (RRC Setup Req, in Msg3) Note over cucp: rrc_handle_RRCSetupRequest() cucp->>ue: F1AP DL RRC Msg Transfer (RRC Setup, in Msg4) ue->>cucp: F1AP UL RRC Msg Transfer (RRC Setup Complete) Note over cucp: rrc_handle_RRCSetupComplete() %% TODO: when is RRC connected? cucp->>amf: NGAP Initial UE Message (NAS Registration/Service Req) Note over amf,ue: NAS Authentication Procedure (see 24.501) Note over amf,ue: NAS Security Procedure (see 24.501) amf->>cucp: NGAP Initial Context Setup Req Note over cucp: rrc_gNB_process_NGAP_INITIAL_CONTEXT_SETUP_REQ() Note over cucp: rrc_gNB_generate_SecurityModeCommand() cucp->>ue: F1AP DL RRC Msg Transfer (RRC Security Mode Command) ue->>cucp: F1AP UL RRC Msg Transfer (RRC Security Mode Complete) Note over cucp: rrc_gNB_decode_dcch() (inline) opt No UE Capabilities present Note over cucp: rrc_gNB_generate_UECapabilityEnquiry() cucp->>ue: F1AP DL RRC Msg Transfer (RRC UE Capability Enquiry) ue->>cucp: F1AP UL RRC Msg Transfer (RRC UE Capability Information) Note over cucp: handle_ueCapabilityInformation() end opt PDU Sessions in NGAP Initial Context Setup Req present Note over cucp: trigger_bearer_setup() cucp->>cuup: E1AP Bearer Context Setup Req cuup->>cucp: E1AP Bearer Context Setup Resp Note over cucp: rrc_gNB_process_e1_bearer_context_setup_resp() cucp->>du: F1AP UE Context Setup Req du->>cucp: F1AP UE Context Setup Resp Note over cucp: rrc_CU_process_ue_context_setup_response() Note over cucp: e1_send_bearer_updates() cucp->>cuup: E1AP Bearer Context Modification Req cucp->>ue: F1AP DL RRC Msg Transfer (RRC Reconfiguration) cuup->>cucp: E1AP Bearer Context Modification Resp ue->>cucp: F1AP UL RRC Msg Transfer (RRC Reconfiguration Complete) Note over cucp: handle_rrcReconfigurationComplete() end Note over cucp: rrc_gNB_send_NGAP_INITIAL_CONTEXT_SETUP_RESP() cucp->>amf: NGAP Initial Context Setup Resp (NAS Registration/Service Complete) ``` Note that if no PDU session is present in the NGAP Initial UE Context Setup Req, no F1AP UE Context Setup will be observed during this initial phase. If there is no PDU session set up during NGAP Initial Context Setup Req, the UE typically requests a PDU session(s) through a NAS procedure, which is basically the same code paths as the above optional PDU Session setup during an NGAP Initial Context Setup procedure: ```mermaid sequenceDiagram participant ue as UE participant du as DU participant cucp as CU-CP participant cuup as CU-UP participant amf as AMF ue->>cucp: F1AP UL RRC Msg Transfer (RRC UL Information Transfer) cucp->>amf: NGAP UL NAS Transport (NAS PDU Session Establishment Req) amf->>cucp: NGAP PDU Session Resource Setup Req (NAS PDU Session Establishment Accept) Note over cucp: rrc_gNB_process_NGAP_PDUSESSION_SETUP_REQ() Note over cucp: trigger_bearer_setup() cucp->>cuup: E1AP Bearer Context Setup Req cuup->>cucp: E1AP Bearer Context Setup Resp Note over cucp: rrc_gNB_process_e1_bearer_context_setup_resp() cucp->>du: F1AP UE Context Setup Req du->>cucp: F1AP UE Context Setup Resp Note over cucp: rrc_CU_process_ue_context_setup_response() Note over cucp: e1_send_bearer_updates() cucp->>cuup: E1AP Bearer Context Modification Req cucp->>ue: F1AP DL RRC Msg Transfer (RRC Reconfiguration + NAS PDU Session Establishment Accept) cuup->>cucp: E1AP Bearer Context Modification Resp ue->>cucp: F1AP UL RRC Msg Transfer (RRC Reconfiguration Complete) Note over cucp: handle_rrcReconfigurationComplete() Note over cucp: rrc_gNB_send_NGAP_PDUSESSION_SETUP_RESP() cucp->>amf: NGAP PDU Session Resource Setup Resp ``` ### Reestablishment The following sequence diagram shows the principal steps during a reestablishment request. When handling the RRC Reestablishment Request at the CU-CP, it notably checks if this UE is already known, if the UE is still at the same DU as it used to be previously (might change because of, or despite handover), and other validation checks. If all checks pass, the CU-CP continues with the reestablishment procedure; if any check fails, the CU-CP tries to release the old UE at the AMF, and continues with the "normal" connection setup (registration/service request) described above. The re-establishment flow implements transparent forwarding of CellGroupConfig per TS 38.473: the CU requests CellGroupConfig from the DU via UE Context Modification Request with `gNB_DU_Configuration_Query=true`, and the DU responds with an encoded CellGroupConfig that the CU forwards to the UE without decode/re-encode cycles. ```mermaid sequenceDiagram participant ue as UE participant du as DU participant cucp as CU-CP participant cuup as CU-UP participant amf as AMF ue->>du: Msg1/Preamble du->>ue: Msg2/RAR ue->>du: Msg3 w/ RRC Reestablishment Request (old C-RNTI/PCI) Note over du: DU creates UE context for new RNTI du->>cucp: F1AP Initial UL RRC Msg Tr (RRC Reestab Req, in Msg3) Note over cucp: rrc_handle_RRCReestablishmentRequest() alt UE known opt PCI mismatch AND Association ID mismatch Note over cucp: Detect different DU (assoc_id != du_assoc_id)
Update du_assoc_id, set f1_ue_context_active=false end Note over cucp: rrc_gNB_generate_RRCReestablishment()
SRB1 PDCP reestablishment cucp->>du: F1AP DL RRC Msg Tr (gNB-DU-UE ID) Note over du: dl_rrc_message_transfer() alt Old UE found Note over du: Reuse configuration of and delete old UE else Old UE not found Note over du: do nothing end Note over du: Set reestablishRLC=true Note over du: - Store CellGroup in reconfigCellGroup
- Remove spCellConfig from CellGroup du->>ue: RRC Reestablishment ue->>du: RRC Reestablishment Complete du->>cucp: F1AP UL RRC Msg Tr (RRC Reestab Complete) Note over cucp: handle_rrcReestablishmentComplete() Note over cucp: rrc_gNB_process_RRCReestablishmentComplete()
Re-establish SRB2 PDCP Note over cucp: cuup_notify_reestablishment()
Notify CU-UP for DRB re-establishment cucp->>cuup: E1AP Bearer Context Modification Req cuup->>cucp: E1AP Bearer Context Modification Resp (asynchronous) alt on the original DU Note over cucp: Send UE Context Modification Request
with gNB_DU_Configuration_Query=true cucp->>du: F1AP UE Context Modification Req du->>cucp: F1AP UE Context Modification Resp
(CellGroupConfig with spCellConfig and reestablishRLC flags) else on a different DU Note over cucp: Detect different DU (!f1_ue_context_active)
Trigger UE Context Setup on new DU cucp->>du: F1AP UE Context Setup Request
du->>cucp: F1AP UE Context Setup Response
(CellGroupConfig with spCellConfig and reestablishRLC flags) end Note over cucp: rrc_CU_process_ue_context_setup/modification_response()
Detect re-establishment via rrc_detect_reestablishment()
rrc_gNB_generate_dedicatedRRCReconfiguration()
(with is_reestablishment=true) cucp->>ue: F1AP DL RRC Msg Transfer (RRC Reconfiguration
with transparent CellGroupConfig) ue->>cucp: F1AP UL RRC Msg Transfer (RRC Reconfiguration Complete) Note over cucp: handle_rrcReconfigurationComplete() else Fallback* cucp->>amf: NGAP UE Context Release Request Note over cucp: rrc_gNB_generate_RRCSetup() Note over ue,amf: Continue with connection setup (registration/service request) end ``` Note on re-establishment on different DU: The "UE known and on a different DU" case is shown in the sequence diagram above. When a UE re-establishes on a different DU than the original one (detected by comparing `du_assoc_id` at RRCReestablishmentRequest), the CU updates `du_assoc_id` and sets `f1_ue_context_active=false`. At RRCReestablishmentComplete, if `f1_ue_context_active` is false, the CU triggers UE Context Setup on the new DU per TS 38.401 §8.7. ### Inter-DU Handover (F1) The basic handover (HO) structure is as follows. In order to support various handover "message passing implementation" (F1AP, NGAP, XnAP), RRC employs callbacks to signal HO Accept (`ho_req_ack()`), HO Success (`ho_success()`), and HO Cancel (`ho_cancel()`). These can be used to trigger the corresponding functionality based on mentioned "message passing implementation". The following sequence diagram shows the basic functional execution of a successful handover in the case of an F1 handover. Note the callbacks as mentioned above: ```mermaid sequenceDiagram participant ue as UE participant sdu as source DU participant tdu as target DU participant cucp as CU-CP participant cuup as CU-UP Note over ue,sdu: UE active on source DU alt HO triggered through A3 event ue->>sdu: RRC Measurement Report sdu->>cucp: F1AP UL RRC Msg Transfer (RRC Measurement Report) Note over cucp: Handover decision (A3 event trigger) else Manual Trigger Note over cucp: Handover decision (e.g., telnet) end Note over cucp: nr_rrc_trigger_f1_ho() ("on source CU") Note over cucp: nr_initiate_handover() ("on target CU") cucp->>tdu: F1AP UE Context Setup Req Note over tdu: Create UE context tdu->>cucp: F1AP UE Context Setup Resp (incl. CellGroupConfig) Note over cucp: rrc_CU_process_ue_context_setup_response() ("on target CU") Note over cucp: cuup_notify_reestablishment() cucp->>cuup: E1AP Bearer Context Modification Req cucp-->>cucp: callback: ho_req_ack() Note over cucp: nr_rrc_f1_ho_acknowledge() ("on source CU") cucp->>sdu: F1AP Context Modification Req (RRC Reconfiguration) cuup->>cucp: E1AP Bearer Context Modification Resp sdu->>ue: RRC Reconfiguration sdu->>cucp: F1AP Context Modification Resp Note over sdu: Stop scheduling UE Note over ue: Resync Note over ue,tdu: RA (Msg1 + Msg2) ue->>tdu: RRC Reconfiguration Complete tdu->>cucp: F1AP UL RRC Msg Transfer (RRC Reconfiguration Complete) Note over cucp: handle_rrcReconfigurationComplete() ("on target CU") cucp-->>cucp: callback: ho_success() Note over cucp: nr_rrc_f1_ho_complete() ("on source CU") cucp->>sdu: F1AP UE Context Release Command sdu->>cucp: F1AP UE Context Release Complete Note over ue,tdu: UE active on target DU ``` ### Inter-gNB Handover (N2) This is an inter-NG-RAN procedure. The N2 handover specification is defined in the following documents: * 3GPP TS 23.502, 4.9.1.3 Inter NG-RAN node N2 based handover: - Outlines detailed handover signaling flows for N2-based handovers. - Covers both intra-system (between 5G gNBs) and inter-system (between 5G and LTE eNBs) handovers. * 3GPP TS 38.300, section 9 Mobility and State Transitions: - describes mobility procedures at the NG-RAN level, depending on the RRC state. * 3GPP TS 38.413 (NGAP), section 8.4 UE Mobility Management Procedures: - Specifies the signaling procedures over the N2 interface. - Includes messages like Handover Request, Handover Command, and Handover Preparation. * 3GPP TS 38.331 (RRC): details the UE-level RRC procedures involved during handovers #### End-to-end flow ```mermaid sequenceDiagram participant ue as UE participant sdu as source DU participant scucp as source CU-CP participant scuup as source CU-UP participant tdu as target DU participant tcucp as target CU-CP participant tcuup as target CU-UP participant amf as AMF Note over ue,sdu: UE active on source DU alt HO triggered through A3 event ue->>sdu: RRC Measurement Report sdu->>scucp: F1AP UL RRC Msg Transfer (RRC Measurement Report) Note over scucp: Handover decision (A3 event trigger) else Manual Trigger Note over scucp: Handover decision (e.g., telnet) end Note over scucp: nr_rrc_trigger_n2_ho() ("on source CU") scucp->>amf: HANDOVER REQUIRED amf->>tcucp: HANDOVER REQUEST Note over tcucp: rrc_gNB_process_Handover_Request Note over tcucp: trigger_bearer_setup tcucp->>tcuup: Bearer Context Setup Request tcuup->>tcucp: Bearer Context Setup Response Note over tcucp: rrc_gNB_process_e1_bearer_context_setup_resp Note over tcucp: nr_rrc_trigger_n2_ho_target() ("on target CU") Note over tcucp: nr_initiate_handover() tcucp->>tdu: F1AP UE Context Setup Req Note over tdu: Create UE context tdu->>tcucp: F1AP UE Context Setup Resp (incl. CellGroupConfig) Note over tcucp: rrc_CU_process_ue_context_setup_response() ("on target CU") Note over tcucp: e1_send_bearer_updates() tcucp->>tcuup: E1AP Bearer Context Modification Req tcuup->>tcucp: E1AP Bearer Context Modification Resp tcucp-->>tcucp: callback: ho_req_ack() Note over tcucp: nr_rrc_n2_ho_acknowledge() ("on target CU") tcucp->>amf: HANDOVER REQUEST ACKNOWLEDGE (data forwarding info) amf->>scucp: HANDOVER COMMAND scucp->>sdu: F1AP UE Context Modification Req (RRC Reconfiguration) sdu->>ue: RRC Reconfiguration sdu->>scucp: F1AP UE Context Modification Resp Note over sdu: Stop scheduling UE Note over scucp: rrc_CU_process_ue_context_modification_response() Note over scucp: e1_send_bearer_updates() scucp->>scuup: E1 Bearer Context Modification Req (PDCP Status Request) scuup->>scucp: E1 Bearer Context Modification Resp (PDCP Status Info) scucp->>amf: NG Uplink RAN Status Transfer amf->>tcucp: NG Downlink RAN Status Transfer tcucp->>tcuup: E1 Bearer Context Modification Req (PDCP Status Info) tcuup->>tcucp: E1 Bearer Context Modification Resp Note over ue: UE attachment to target DU Note over ue,tdu: RA (Msg1 + Msg2) ue->>tdu: RRC Reconfiguration Complete tdu->>tcucp: F1AP UL RRC Msg Transfer (RRC Reconfiguration Complete) tcucp-->>tcucp: callback: ho_success() Note over tcucp: nr_rrc_n2_ho_complete() ("on target CU") Note over tcucp: handle_rrcReconfigurationComplete() ("on target CU") tcucp->>amf: HANDOVER NOTIFY amf->>scucp: UE Context Release Command note over scucp: ngap_gNB_handle_ue_context_release_command note over scucp: rrc_gNB_process_NGAP_UE_CONTEXT_RELEASE_COMMAND scucp->>scuup: E1 Bearer Context Release Command scuup->>scucp: E1 Bearer Context Release Complete Note over scucp: rrc_gNB_generate_RRCRelease scucp->>sdu: F1 UE Context Release Command sdu->>scucp: F1 UE Context Release Complete note over scucp: rrc_CU_process_ue_context_release_complete note over scucp: rrc_remove_ue Note over ue,tdu: UE active on target DU ``` ## Structures ### DUs and Cells OAI 5G RRC is enabling support for multiple DUs, with each DU potentially serving multiple cells (though currently each DU is limited to one cell in practice). The architecture separates DU management from cell management to enable future multi-cell per DU capability. #### DU Management DU-related data is stored in `nr_rrc_du_container_t`, and kept in a red-black tree indexed by the unique SCTP association ID (`assoc_id`). Each DU container stores: - DU identity and name - SCTP association ID for F1 interface communication - RRC version information - Sequential array of cell pointers (`cells`) - stores pointers to cells belonging to this DU (seq_arr_t) Key Functions: - `get_du_by_assoc_id()` - Lookup DU by SCTP association ID (O(log d) tree lookup) - `get_du_for_ue()` - Get DU associated with a specific UE - `find_target_du()` - Find a target DU for handover operations #### Cell Management Cell-related data is stored in `nr_rrc_cell_container_t`. Cells are stored in two data structures: 1. Global cell tree (`rrc->cells`): Red-black tree indexed by `cell_id`, containing all cells from all DUs. Used for efficient O(log N_CELL) lookups across all DUs. PCI reuse across the network is allowed and this is reflected in the tree. 2. DU cell array (`du->cells`): Sequential array (seq_arr_t) of cell pointers, storing only cells belonging to that specific DU. Used for DU-specific operations. PCI must be unique within a DU. Each cell container stores: - Cell identity (NR Cell ID) and PCI (Physical Cell ID) - Link to serving DU via the unique `assoc_id` - Cell-specific information (PLMN, TAC, frequency, mode TDD/FDD) - MIB, SIB1, and MeasurementTimingConfiguration messages Key Functions: - `get_cell_by_cell_id()` - Lookup cell by NR Cell ID using global cell tree - `rrc_get_cell_for_du()` - Lookup cell by cell_id within a specific DU's cell array - `rrc_get_cell_by_pci_for_du()` - Lookup cell by PCI within DU's cells array - `rrc_add_cell_to_du()` - Add cell to DU's sequential array - `rrc_free_cell_container()` - Free cell container and associated ASN.1 structures Architecture Notes: - The `assoc_id` field (in cell and DUs containers) links cells to their serving DUs - When a DU connects via F1 Setup, cells are added to both the global tree and the DU's array - When a DU disconnects, cells are removed from both structures - Global tree enables efficient cross-DU cell lookups (O(log N_CELL)) - DU array enables efficient per-DU cell iteration (O(k) where k=cells per DU) - Each DU maintains a sequential array of cell pointers ##### DU and Cell Lifecycle The following diagram shows the lifecycle of DUs and their associated cells, including the main F1AP messages and internal operations: ```mermaid sequenceDiagram participant CellTree as Cell Tree participant DUTree as DU Tree participant CU as CU-CP participant DU as gNB-DU participant UE as UE Note over DU,CellTree: DU Connection & Cell Registration DU->>CU: F1AP F1 Setup Request(DU ID, Cell Info, MIB/SIB1) Note over CU: Validate: PLMN match with CU configuration alt PLMN mismatch CU->>DU: F1AP F1 Setup Failure (PLMN not served) end Note over CU: Validate: DU ID uniqueness (RB_FOREACH gNB_DU_id in DU tree) alt DU ID already exists CU->>DU: F1AP F1 Setup Failure (Unspecified) end Note over CU: Validate: Neighbour cell configuration (if configured) alt Neighbour config invalid CU->>DU: F1AP F1 Setup Failure (Unspecified) end Note over CU: Extract MIB/SIB1 from system info (if present) alt System info extraction fails CU->>DU: F1AP F1 Setup Failure (Semantic error) end alt All Validations Success CU->>CU: Create cell container (nr_rrc_cell_container_t), set assoc_id, copy cell info, set MIB/SIB1 CU->>CellTree: rrc_add_cell(rrc, new) - RB_INSERT into global tree, increment rrc->num_cells alt Duplicate cell_id (collision) CU->>DU: F1AP F1 Setup Failure (Cell not available) else Cell added to tree CU->>CU: Create DU container (nr_rrc_du_container_t) CU->>CU: seq_arr_init(&du->cells) - Initialize DU's cell array CU->>DUTree: rrc_add_du(rrc, du) - RB_INSERT(du), increment rrc->num_dus CU->>CU: rrc_add_cell_to_du(&du->cells, new) - Add cell to DU's array Note over CU,UE: Cell available for UE association CU->>CU: Encode CU SIBs (if configured) CU->>DU: F1AP F1 Setup Response(Cells to Activate, CU SIBs) Note over CU,CellTree: DU and cell now active end end UE->>CU: RRC Setup Request Note over CU: rrc_handle_RRCSetupRequest() CU->>CU: get_cell_by_cell_id(&rrc->cells) - Use global tree alt Cell not found CU->>UE: RRC Reject end Note over CU: UE Cell Association CU->>CU: rrc_add_ue_serving_cell(UE, cell, RRC_PCELL_INDEX) Note over DU,CellTree: Optional: Cell Configuration Update opt DU sends configuration update DU->>CU: F1AP DU Configuration Update(Add/Modify/Delete cells) Note over CU: get_du_by_assoc_id(assoc_id) loop For each cell to add CU->>CU: get_cell_by_cell_id(&rrc->cells) - Check cell_id uniqueness globally alt Duplicate cell_id found Note over CU: Reject and return end CU->>CU: rrc_get_cell_by_pci_for_du(&du->cells) - Check PCI unique within DU alt Duplicate PCI in DU Note over CU: Reject and return end end loop Cell Modification CU->>CU: get_cell_by_cell_id(cells, old_nr_cellid) - Find cell by old cell_id CU->>CU: update_cell_info(rrc, old_nci, new_ci) - Update in place Note over CU: If cell_id changes: RB_REMOVE then re-insert after update Note over CU: Free old MTC if new measurement timing config provided Note over CU: If sys_info present: extract MIB/SIB1 and set on cell end CU->>DU: F1AP DU Configuration Update Acknowledge end Note over DU,CellTree: DU Disconnection & Cell Cleanup DU-->>CU: F1AP Lost Connection(SCTP connection lost) Note over CU: rrc_CU_process_f1_lost_connection() CU->>DUTree: RB_FIND(du) - Find DU by assoc_id using temporary struct alt DU not found Note over CU: Log warning and return end Note over CU: rrc_cleanup_du() then invalidate_du_connections() CU->>CU: Iterate cells in DU's array (last to first) loop For each cell in DU's array CU->>CU: seq_arr_erase(&du->cells, cell_ptr) - Remove from DU's array CU->>CellTree: rrc_rm_cell(): RB_REMOVE(cell), decrement num_cells, rrc_free_cell_container() end CU->>DUTree: rrc_rm_du(): RB_REMOVE(du) - Remove DU from tree CU->>CU: Decrement rrc->num_dus counter CU->>CU: seq_arr_free(&du->cells) - Free DU's cell array CU->>CU: rrc_free_du_container() - Free DU container Note over CU: invalidate_du_connections() loop For each UE: CU->>CU: rrc_remove_ue_scells_from_du() - Remove SCells from disconnected DU alt UE belongs to disconnected DU CU->>CU: Set du_assoc_id = 0 (mark DU offline) CU->>CU: Trigger NGAP UE Context Release Request end end Note over CU,CellTree: DU and all cells removed ``` Key Functions: - `rrc_gNB_process_f1_setup_req()` - Handles F1 Setup Request, creates DU and cell containers. Validates PLMN match, DU ID uniqueness, and cell_id/PCI uniqueness before creating containers. - `rrc_gNB_process_f1_du_configuration_update()` - Handles cell configuration updates. Currently supports cell modification (MIB/SIB1 updates) and validates cell additions, but cell addition and deletion are not yet fully implemented. - `rrc_CU_process_f1_lost_connection()` - Handles DU disconnection. Calls `rrc_cleanup_du()` to remove all cells and the DU from their trees and free resources, then `invalidate_du_connections()` to clean up UE associations (e.g. trigger NGAP UE Context Release Request for UEs on that DU). #### UE Cell Association Management The RRC maintains a per-UE association with serving cells, tracking which cells a UE is currently using. This replaces the previous single-cell assumption and enables proper multi-cell support where each UE can have multiple serving cells (one PCell and up to 31 SCells). The servCellIndex (TS 38.331) is tracked per-UE in the `ue_serving_cell_t` structure in the UE context (the same cell can have different servCellIndex values for different UEs). Data Structures: - `ue_serving_cell_t`: Stores serving cell information (nci, servCellIndex, assoc_id) - `gNB_RRC_UE_t.serving_cells`: Dynamic array (seq_arr_t) of serving cell entries. PCell is always at index 0. Key Functions: - `rrc_add_ue_serving_cell()` - Adds a new serving cell to UE's serving_cells array. - `rrc_get_ue_serving_cell_by_id()` - Retrieves serving cell entry by servCellIndex. - `ue_get_pcell_entry()` - Returns the PCell serving cell entry (first element in serving_cells). - `rrc_remove_ue_scells_from_du()` - Removes all serving cells belonging to a specific DU via assoc_id (e.g. during handover or DU disconnection). ##### Handover and Cell Association Updates During handover, the UE's serving cell list is updated so the PCell reflects the target cell and source-DU cells are removed. ###### F1 handover (inter-DU, same CU-CP) Cell association is updated when the **source** DU sends F1AP UE Context Modification Response (after it has sent the RRC Reconfiguration to the UE). The CU-CP is a single RRC instance; both source DU and target DU are under the same CU. ```mermaid sequenceDiagram participant SourceDU as Source DU participant CU as CU-CP Note over CU,CU: F1 handover: cell association update on Context Modification Response SourceDU->>CU: F1AP UE Context Modification Response Note over CU: rrc_CU_process_ue_context_modification_response() Note over CU: Check: ho_context && source && target (F1 HO) alt F1 handover in progress CU->>CU: nr_rrc_apply_target_context(UE) Note over CU: F1 UE data: du_assoc_id = target DU, secondary_ue = target DU UE ID, RNTI = target RNTI CU->>CU: nr_rrc_update_cell_assoc_after_ho(rrc, UE) Note over CU: F1 branch (ho_context->source present): CU->>CU: rrc_remove_ue_scells_from_du(UE, source_ctx->cell->assoc_id) Note over CU: Remove all serving cells (incl. PCell) belonging to source DU CU->>CU: rrc_add_ue_serving_cell(UE, target_ctx->cell, RRC_PCELL_INDEX) Note over CU: Handover complete: PCell = target cell, source DU cells removed end ``` ###### N2 handover (inter-gNB: source CU vs target CU) Cell association is updated only on the target CU-CP, when the target DU sends F1AP UE Context Setup Response. The UE context was created for handover, so there is no existing serving cell to remove. The flow is triggered inside the handover request acknowledge callback. - Target CU-CP: Receives HANDOVER REQUEST, sets up bearer and F1 UE context on target DU; when the target DU sends F1AP UE Context Setup Response, the target CU runs the cell-association update and then sends HANDOVER REQUEST ACKNOWLEDGE. ```mermaid sequenceDiagram participant TargetDU as Target DU participant TargetCU as Target CU-CP Note over TargetCU: N2 handover: cell association update Note over TargetCU: F1AP UE Context Setup Resp from target DU (in nr_rrc_n2_ho_acknowledge) TargetDU->>TargetCU: F1AP UE Context Setup Response Note over TargetCU: rrc_CU_process_ue_context_setup_response() then callback ho_req_ack() Note over TargetCU: nr_rrc_n2_ho_acknowledge(rrc, UE) TargetCU->>TargetCU: nr_rrc_apply_target_context(UE) Note over TargetCU: F1 UE data: du_assoc_id = target DU, secondary_ue = target DU UE ID, RNTI = target RNTI TargetCU->>TargetCU: nr_rrc_update_cell_assoc_after_ho(rrc, UE) Note over TargetCU: N2 branch (ho_context->source NULL): no SCells to remove TargetCU->>TargetCU: rrc_add_ue_serving_cell(UE, target_ctx->cell, RRC_PCELL_INDEX) Note over TargetCU: Then: encode Handover Command, send NGAP HANDOVER REQUEST ACKNOWLEDGE ``` ### Neighbour cells #### SIB3/SIB4 and measurement-gap implementation The following section documents the implementation-level control flow for SIB3/SIB4 and measurement-gap handling in current OAI, using the configured neighbor cell list as a shared input model. Briefly, the three procedures are: - SIB3: CU derives and provides intra-frequency neighbour SI, which DU broadcasts and UE uses for autonomous idle/inactive intra-frequency reselection. - SIB4: CU derives and provides inter-frequency carrier/neighbour SI, which DU broadcasts and UE uses for autonomous idle/inactive inter-frequency reselection. - MeasGap: CU/DU coordinate dedicated `MeasGapConfig` in UE `MeasConfig`, DU scheduler interrupts transmission (`nr_measgap_scheduling()`) for the UE to apply the MeasGap configuration in connected mode for gap-based measurements that are sent as `MeasurementReport` and processed at CU-CP (`rrc_gNB_process_MeasurementReport()`). Event-driven reports (for example A3) are used by CU-side mobility logic and can trigger handover procedures. ### MeasGap ```mermaid sequenceDiagram participant DM as Data model (neighbour_cell_configuration) participant CU as CU-CP (RRC) participant DU as DU (MAC/RRC) participant UE as UE CU-->>DM: Read serving + neighbour frequency/PCI/band data DM-->>CU: Provide neighbour/frequency inputs for MeasConfig CU->>CU: nr_rrc_get_measconfig Note over CU: Build UE MeasConfig CU->>CU: get_meas_timing_config (cell.mtc, ue.measConfig) Note over CU: Check distinct ssbFrequency alt one frequency only Note over CU: returns NULL, no meas_timing_config sent to DU else multiple frequencies CU->>DU: F1AP UE Context Setup Request Note over CU,DU: Includes cu_to_du_rrc_info.meas_timing_config DU->>DU: create_measgap_config DU->>DU: encode_measgap_config DU-->>CU: F1AP UE Context Setup Response Note over DU,CU: Includes du_to_cu_rrc_info.meas_gap_config CU->>CU: get_meas_gap_config Note over CU: Decode/store gap in UE MeasConfig (UE.measConfig.measGapConfig) CU->>UE: RRCReconfiguration Note over CU,UE: Includes MeasConfig.measGapConfig rect rgba(210, 235, 255, 0.35) Note over DU,UE: Measurement-gap window DU->>DU: nr_measgap_scheduling Note over DU: Interrupt transmission for meas gap UE->>UE: nr_rrc_handle_meas_indication Note over UE: Perform gap-based neighbour/inter-frequency measurements UE-->>CU: MeasurementReport end Note over UE,CU: UL-DCCH MeasurementReport for configured events (e.g. A3) CU->>CU: rrc_gNB_process_MeasurementReport Note over CU: Run mobility decision logic (may trigger handover) end ``` ### SIB3/SIB4 ```mermaid sequenceDiagram participant DM as Data model (neighbour_cell_configuration) participant CU as CU-CP (RRC) participant DU as DU participant UE as UE CU->>CU: cp_f1_served_cell_info_to_cell CU->>DM: get_cell_neighbour_list DM-->>CU: neighbour_cell_configuration for serving cell CU->>CU: get_ssb_arfcn Note over CU: Derive serving_ssb_arfcn from cell MTC loop for each configured neighbour Note over CU: Compare neighbour.absoluteFrequencySSB vs serving_ssb_arfcn alt equal CU->>CU: get_sib3_intra_freq_neighbors else different CU->>CU: get_sib4_inter_freq_neighbors end end CU-->>DU: F1AP F1 Setup Response DU-->>UE: BCCH-DL-SCH-Message Note over DU,UE: Broadcast SystemInformation including configured SIB3/SIB4 UE->>UE: nr_rrc_ue_decode_NR_BCCH_DL_SCH_Message Note over UE: Evaluate idle/inactive reselection criteria and timers Note over UE,DU: After reselection, access/registration continues on selected cell DU as needed ``` ## UE Context UE context information is stored in `gNB_RRC_UE_t`, which includes: - Serving cells tracking: Dynamic array of serving cells (PCell + SCells) - Security context: Keys, algorithms, and security state - Radio bearers: SRB and DRB configurations - PDU sessions: Active PDU session information - Handover context: Temporary data during handover procedures ### CU-UPs CU-UP information is stored in `nr_rrc_cuup_container_t`, and kept in a tree indexed by the SCTP association ID. ### Transactions The RRC keeps track of ongoing transaction (RRC procedures) through a per-UE array `xids`, which is indexed with a transaction ID `xid` in `[0,3]` to keep track of ongoing transactions. Upon RRC Reconfiguration Complete, these IDs are deleted. Note that while 38.331 requires only one RRC transaction to happen at a time, the 5G RRC does not actually ensure this; it only tries to prevent it by chaining of transactions and some checks. For instance, the Security Mode procedure is followed by a UE capability procedure, and some procedures are not executed if others are ongoing (ex.: handover if there is reconfiguration). However, it might be possible to trigger a procedure while another is ongoing. As of now, no queueing mechanims exists to ensure only one operation is ongoing, which would likely also simplify the code. ### Handover Handover-related data is stored in a per-UE structure of type `nr_handover_context_t`. It is a pointer and only set during handover operation. This data structure has in turn two pointers, one to the source CU (`nr_ho_source_cu_t`), and one to the target CU (`nr_ho_target_cu_t`). In F1, both are present. In N2 and Xn, only one pointer is supposed to be set at the corresponding CU. - `nr_ho_source_cu_t` contains notably a function pointer `ho_cancel` for handover cancel. - `nr_ho_target_cu_t` contains function pointers `ho_req_ack` for handover request acknowledge, `ho_success` for handover success, `ho_failure` for handover failure (N2 only). be seen in the sequence diagram above, either the "target CU" or "source CU" needs to do an operation, and a "switch" from target to source CU is done using these function pointers. - For instance, in F1, the handover request acknowledge function pointers merely calls another (RRC) function which triggers a reconfiguration. - In the case of N2, the handover request acknowledge function pointer should trigger the NGAP Handover Request Acknowledge, and the handover success function pointer should trigger the NGAP Handover Success message.