|
|
L2 nFAPI Simulator (with S1 / same machine deployment) |
Note that the IP addresses are indicative and need to be adapted to your environment.
# 2. Prepare the EPC #
Create the environment for the EPC and register all **USIM** information into the **HSS** database.
If you are using OAI-EPC ([see on GitHub](https://github.com/OPENAIRINTERFACE/openair-cn)), build **HSS/MME/SPGW** and create config files.
# 3. Retrieve the OAI eNB-UE source code #
The eNB and the UE executables will compiled into 2 separate folders on the same machine `B`.
```bash
$ ssh sudousername@machineB
$ git clone https://gitlab.eurecom.fr/oai/openairinterface5g/ enb_folder
$ cd enb_folder
$ git checkout -f v1.0.0
$ cd ..
$ cp -Rf enb_folder ue_folder
```
# 4. Setup of the USIM information in UE folder #
```bash
$ ssh sudousername@machineB
$ cd ue_folder
# Edit openair3/NAS/TOOLS/ue_eurecom_test_sfr.conf with your preferred editor
```
Edit the USIM information within this file in order to match the HSS database. They **HAVE TO** match:
* PLMN+MSIN and IMSI of users table of HSS database **SHALL** be the same.
* OPC of this file and OPC of users table of HSS database **SHALL** be the same.
* USIM_API_K of this file and the key of users table of HSS database **SHALL** be the same.
When testing multiple UEs, it is necessary to add other UEs information like described below for 2 Users. Only UE0 (first UE) information is written in the original file.
```
UE0:
{
USER: {
IMEI="356113022094149";
MANUFACTURER="EURECOM";
MODEL="LTE Android PC";
PIN="0000";
};
SIM: {
MSIN="0000000001"; // <-- Modify here
USIM_API_K="8baf473f2f8fd09487cccbd7097c6862";
OPC="e734f8734007d6c5ce7a0508809e7e9c";
MSISDN="33611123456";
};
...
};
// Copy the UE0 and edit
UE1: // <- Edit here
{
USER: {
IMEI="356113022094149";
MANUFACTURER="EURECOM";
MODEL="LTE Android PC";
PIN="0000";
};
SIM: {
MSIN="0000000002"; // <-- Modify here
USIM_API_K="8baf473f2f8fd09487cccbd7097c6862";
OPC="e734f8734007d6c5ce7a0508809e7e9c";
MSISDN="33611123456";
};
...
};
```
You can repeat the operation for as many users you want to test with.
# 5. Setup of the Configuration files #
**CAUTION: both proposed configuration files resides in the ci-scripts realm. You can copy them but you CANNOT push any modification on these 2 files as part of an MR without informing the CI team.**
## 5.1. The eNB Configuration file ##
```bash
$ ssh sudousername@machineB
$ cd enb_folder
# Edit ci-scripts/conf_files/rcc.band7.tm1.nfapi.conf with your preferred editor
```
First verify the nFAPI interface setup on the 2nd loopback interface.
```
MACRLCs = (
{
num_cc = 1;
local_s_if_name = "lo:"; // <-- HERE
remote_s_address = "127.0.0.1"; // <-- HERE
local_s_address = "127.0.0.2"; // <-- HERE
local_s_portc = 50001;
remote_s_portc = 50000;
local_s_portd = 50011;
remote_s_portd = 50010;
tr_s_preference = "nfapi";
tr_n_preference = "local_RRC";
}
);
```
If you are testing more than 16 UEs, a proper setting on the RUs is necessary. **Note that this part is NOT present in the original configuration file**.
```
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 20
att_rx = 0;
bands = [38];
max_pdschReferenceSignalPower = -23;
max_rxgain = 116;
eNB_instances = [0];
}
);
```
Last, the S1 interface shall be properly set.
```
////////// MME parameters:
mme_ip_address = ( { ipv4 = "CI_MME_IP_ADDR"; // replace with 192.168.10.20
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "ens3"; // replace with the proper interface name
ENB_IPV4_ADDRESS_FOR_S1_MME = "CI_ENB_IP_ADDR"; // replace with 192.168.10.10
ENB_INTERFACE_NAME_FOR_S1U = "ens3"; // replace with the proper interface name
ENB_IPV4_ADDRESS_FOR_S1U = "CI_ENB_IP_ADDR"; // replace with 192.168.10.10
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "CI_ENB_IP_ADDR"; // replace with 192.168.10.10
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
```
## 5.2. The UE Configuration file ##
```bash
$ ssh sudousername@machineB
$ cd ue_folder
# Edit ci-scripts/conf_files/ue.nfapi.conf with your preferred editor
```
Verify the nFAPI interface setup on the loopback interface.
```
L1s = (
{
num_cc = 1;
tr_n_preference = "nfapi";
local_n_if_name = "lo"; // <- HERE
remote_n_address = "127.0.0.2"; // <- HERE
local_n_address = "127.0.0.1"; // <- HERE
local_n_portc = 50000;
remote_n_portc = 50001;
local_n_portd = 50010;
remote_n_portd = 50011;
}
);
```
# 6. Bring Up a second loopback interface #
A second loopback interface is used to connect the eNB and the UEs.
```bash
$ ssh sudousername@machineB
$ sudo ifconfig lo: 127.0.0.2 netmask 255.0.0.0 up
```
# 7. [Build OAI UE and eNodeB](BUILD.md) #
# 8. Initialize the NAS UE Layer #
Start the EPC on machine `A`.
```bash
$ ssh sudousername@machineA
# Start the EPC
```
# 9. Start the eNB #
In the first terminal (the one you used to build the eNB):
```bash
$ ssh sudousername@machineB
$ cd enb_folder/cmake_targets
$ sudo -E ./lte_build_oai/build/lte-softmodem -O ../ci-scripts/conf_files/rcc.band7.tm1.nfapi.conf > enb.log 2>&1
```
If you don't use redirection, you can test but many logs are printed on the console and this may affect performance of the L2-nFAPI simulator.
We do recommend the redirection in steady mode once your setup is correct.
# 10. Start the UE #
In the second terminal (the one you used to build the UE):
```bash
$ ssh sudousername@machineB
$ cd ue_folder/cmake_targets
# Test 64 UEs, 64 threads in FDD mode
$ sudo -E ./lte_build_oai/build/lte-uesoftmodem -O ../ci-scripts/conf_files/ue.nfapi.conf --L2-emul 3 --num-ues 64 --nums-ue-thread 64 > ue.log 2>&1
# Test 64 UEs, 64 threads in TDD mode
$ sudo -E ./lte_build_oai/build/lte-uesoftmodem -O ../ci-scripts/conf_files/ue.nfapi.conf --L2-emul 3 --num-ues 64 --nums-ue-thread 64 -T 1 > ue.log 2>&1
# The "-T 1" option means TDD config
```
- The number of UEs can set by using `--num-ues` option and the maximum UE number is 255 (with the `--mu*` options, otherwise 16).
- The umber of threads can set with the `--nums-ue-thread`. This number **SHALL NOT** be greater than the number of UEs.
- How many UE that can be tested depends on hardware (server , PC, etc) performance in your environment.
# 11. Test with ping #
In a third terminal, after around 10 seconds, the UE(s) shall be connected to the eNB:
```bash
$ ssh sudousername@machineA
# Ping UE0 IP address based on the EPC pool used: in this example:
$ ping -c 20 192.168.200.2
# Ping UE1 IP address based on the EPC pool used: in this example:
$ ping -c 20 192.168.200.4
```
# 12. Limitations #
Testing on the CI process is currently limited at time of writing. Improvements will be made soon.
[oai wiki home](https://gitlab.eurecom.fr/oai/openairinterface5g/wikis/home)
[oai softmodem features](FEATURE_SET.md)
[oai softmodem build procedure](BUILD.md)
[L2 nfapi simulator](L2NFAPI.md)