# how to build phy sim
cd cmake_targets/
sudo ./build_oai --phy_simulators -c

cd phy_simulators/build/
# ULSCH sim  
# bit level validation                   
# PUSCH encoding and decoding for 4 layers   2 CMD without data
sudo ./nr_ulschsim -R 106 -m9 -s13 -n100 -y4 -z4 -W4

# UL sim
# Uplink chain validation  
# PUSCH on UE side and gNB side,whole chain for PUSCH
# No channel model on data domain signal
# No cross-path connection
# PMI = 0  is only unitary prcoding matrix
sudo ./nr_ulsim -n100 -m9 -r106 -s13 -W4 -y4 -z4   

# How to build rfsim
sudo ./build_oai -c --gNB --nrUE -w SIMU

# How to run with rfsim
# 4x4 RANK 4
sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.4layer.conf --rfsim --phy-test --l 2  --L 4
sudo ./nr-uesoftmodem  --rfsim --phy-test --ue-nb-ant-rx 4 --ue-nb-ant-tx 4
# 4x4 RANK 2
sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.4layer.conf --rfsim --phy-test --l 2  --L 2
sudo ./nr-uesoftmodem  --rfsim --phy-test --ue-nb-ant-rx 4 --ue-nb-ant-tx 4