CPUFLAGS = -mmmx -msse -msse2 -m32 -mssse3 -msse4.1

TOP_DIR = $(OPENAIR1_DIR)
OPENAIR1_TOP = $(OPENAIR1_DIR)
OPENAIR2_TOP = $(OPENAIR2_DIR)
OPENAIR3 = $(OPENAIR3_DIR)

CFLAGS =  -Wall -fno-common -mpreferred-stack-boundary=4 -fno-strict-aliasing -DPHYSIM -DNODE_RG -DUSER_MODE -DPC_TARGET -DPC_DSP -DNB_ANTENNAS_RX=2 -DNB_ANTENNAS_TXRX=2 -DNB_ANTENNAS_TX=2 -DPHY_CONTEXT=1 -g -ggdb -rdynamic $(CPUFLAGS) -DMALLOC_CHECK_=1 # -Wno-packed-bitfield-compat -O2

CFLAGS += -DNEW_FFT

LFLAGS = -lm -lblas -lxml2 -lrt 

ifdef GPIB
LFLAGS += -lgpib
endif

GCCVERSION = $(shell gcc --version | grep ^gcc | sed 's/^.* //g')
ifeq "$(GCCVERSION)"  "4.4.3"
    CFLAGS += -Wno-packed-bitfield-compat
endif
ifeq "$(GCCVERSION)" "4.5.2"
    CFLAGS += -Wno-packed-bitfield-compat
endif
ifeq "$(GCCVERSION)" "4.6.1"
    CFLAGS += -Wno-packed-bitfield-compat
endif

CFLAGS += -DOPENAIR_LTE #-DOFDMA_ULSCH #-DIFFT_FPGA -DIFFT_FPGA_UE
#CFLAGS += -DTBS_FIX
CFLAGS += -DCELLULAR

ASN1_MSG_INC = $(OPENAIR2_DIR)/RRC/LITE/MESSAGES

ifdef EMOS
CFLAGS += -DEMOS
endif

ifdef DEBUG_PHY
CFLAGS += -DDEBUG_PHY
endif

ifdef MeNBMUE
CFLAGS += -DMeNBMUE
endif

ifdef MU_RECEIVER
CFLAGS += -DMU_RECEIVER
endif

ifdef ZBF_ENABLED
CFLAGS += -DNULL_SHAPE_BF_ENABLED
endif

ifdef RANDOM_BF
CFLAGS += -DRANDOM_BF
endif

ifdef PBS_SIM
CFLAGS += -DPBS_SIM
endif

ifdef XFORMS
CFLAGS += -DXFORMS
LFLAGS += -lforms
endif

ifdef PERFECT_CE
CFLAGS += -DPERFECT_CE
endif

ifdef BIT8_TX
CFLAGS += -DBIT8_TX
endif

CFLAGS += -DNO_RRM -DOPENAIR1 #-DOPENAIR2 #-DPHY_ABSTRACTION

CFLAGS += -I/usr/include/X11 -I/usr/X11R6/include

ifdef ENABLE_FXP
CFLAGS += -DENABLE_FXP # Fxp only
else
 ifdef ENABLE_FLP
 CFLAGS += -DENABLE_FLP # dual_stream_correlation(), channel_compensation_prec() and qam16_qam16_mu_mimo() are flp (independently)	
 else
  ifdef ENABLE_FULL_FLP
  CFLAGS += -DENABLE_FULL_FLP # Flp inside of rx_pdsch() (dlsch_detection_mrc(), dual_stream_correlation(), channel_compensation_prec(), qam16_qam16_mu_mimo() and dlsch_16qam_16qam_llr)
  else
  CFLAGS += -DENABLE_FXP # Fxp only by default
  endif
 endif
endif

ifdef COMPARE_FLP_AND_FXP
CFLAGS += -DCOMPARE_FLP_AND_FXP
endif

ifdef RTAI
CFLAGS += -DRTAI_ENABLED  -D__IN_RTAI__ $(shell rtai-config --lxrt-cflags)
LFLAGS += $(shell rtai-config --lxrt-ldflags) -llxrt
endif

include $(TOP_DIR)/PHY/Makefile.inc
SCHED_OBJS = $(TOP_DIR)/SCHED/phy_procedures_lte_common.o #$(TOP_DIR)/SCHED/phy_procedures_lte_eNb.o $(TOP_DIR)/SCHED/phy_procedures_lte_ue.o
#include $(TOP_DIR)/SCHED/Makefile.inc
include $(TOP_DIR)/SIMULATION/Makefile.inc
include $(OPENAIR2_DIR)/LAYER2/Makefile.inc
include $(OPENAIR2_DIR)/UTIL/Makefile.inc
include $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/Makefile.inc

CFLAGS += $(L2_incl) -I$(ASN1_MSG_INC) -I$(TOP_DIR) -I$(OPENAIR3) $(UTIL_incl)
# EXTRA_CFLAGS = 

#STATS_OBJS += $(TOP_DIR)/ARCH/CBMIMO1/DEVICE_DRIVER/cbmimo1_proc.o

#LAYER2_OBJ += $(OPENAIR2_DIR)/LAYER2/MAC/rar_tools.o
#LAYER2_OBJ = $(OPENAIR2_DIR)/LAYER2/MAC/lte_transport_init.o

OBJ = $(PHY_OBJS) $(SIMULATION_OBJS) $(TOOLS_OBJS) $(SCHED_OBJS) $(LAYER2_OBJ) $(LOG_OBJS) 
ifdef GPIB
OBJ += LTE_Configuration.o
endif
#OBJ2 = $(PHY_OBJS) $(SIMULATION_OBJS) $(TOOLS_OBJS)  

ifdef XFORMS
OBJ += ../../USERSPACE_TOOLS/SCOPE/lte_scope.o
endif

OBJ += $(LOG_DIR)/vcd_signal_dumper.o

all:  femtosim

#$(OBJ)
femtosim :   femtoUtils.o femtosim.c	
	@echo "Compiling femtosim.c"
	@$(CC) -o femtosim femtosim.c  femtoUtils.o $(CFLAGS) $(OBJ) $(LFLAGS)  #-static -L/usr/lib/libblas #-lm -lblas

femtoUtils.o: $(OBJ)  femtoUtils.h femtoUtils.c
	@echo "Compiling femtoUtils.c"
	@$(CC) -c femtoUtils.c $(CFLAGS) $(OBJ) $(LFLAGS)  -L/usr/lib/libblas #-lm -lblas -DPERFECT_CE

Tester: Tester.c 
	@$(CC) Tester.c -o Tester	$(CFLAGS)

ComparaFile: ComparaFile.c
	@$(CC) ComparaFile.c -o ComparaFile

clean :
	rm -f $(OBJ)
	rm -f *.o

cleanall : clean
	rm -f  femtosim
	rm -f *.exe*

#showflags :
	#@echo $(CFLAGS)
	#@echo $(LFLAGS)