stevens calisson mozart nano amerique /mnt/sradio/TEST_RESULTS https://gitlab.eurecom.fr/oai/openairinterface5g.git https://gitlab.eurecom.fr/oai/openair-cn.git enhancement-57-UHD-interfacing feature-17-test_framework oaisim* oaisim_nos1* lte-softmodem* lte-softmodem-nos1* mme_gw* run_epc* run_hss* iperf* hss hss_sim configure_cots_bandrich_ue* wvdial* run_exec_autotests* iperf /opt/ltebox/tools/stop_ltebox cd $OPENAIR_DIR/cmake_targets/autotests/tools/exmimo; sudo -E -S octave ./exmimo_stop.m 36000 0104+ 015502 015505 015506 015507 015508 015508 015509 015510 015511 015600 015700 016102 016105 calisson stevens mozart nano amerique compilation Build oaisim.Rel8 $OPENAIR_DIR/cmake_targets/build_oai --oaisim -r Rel8 -c $OPENAIR_DIR/cmake_targets/oaisim_build_oai/build/oaisim $OPENAIR_DIR/cmake_targets/at_commands/build/at_nas_ue $OPENAIR_DIR/cmake_targets/nas_sim_tools/build/usim $OPENAIR_DIR/cmake_targets/nas_sim_tools/build/nvram oaisim.Rel8 1 compilation Build oaisim.Rel10 $OPENAIR_DIR/cmake_targets/build_oai --oaisim -r Rel10 -c $OPENAIR_DIR/cmake_targets/oaisim_build_oai/build/oaisim $OPENAIR_DIR/cmake_targets/at_commands/build/at_nas_ue $OPENAIR_DIR/cmake_targets/nas_sim_tools/build/usim $OPENAIR_DIR/cmake_targets/nas_sim_tools/build/nvram oaisim.Rel10 1 compilation Build oaisim_noS1.Rel10 $OPENAIR_DIR/cmake_targets/build_oai --oaisim -r Rel10 --noS1 -c $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/rb_tool $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/CMakeFiles/oai_nw_drv/oai_nw_drv.ko oaisim_noS1.Rel10 1 compilation Build lte_softmodem_noS1.USRP.Rel10 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -r Rel10 --noS1 -c $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko lte-softmodem_noS1.USRP.Rel10 1 compilation Build lte_softmodem_noS1.EXMIMO.Rel10 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w EXMIMO -r Rel10 --noS1 -c $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/openair_rf/openair_rf.ko $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/updatefw $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/oarf_config_exmimo.oct lte-softmodem_noS1.EXMIMO.Rel10 1 compilation Build lte_softmodem_noS1.BLADERF.Rel10 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w BLADERF -r Rel10 --noS1 -c $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko lte-softmodem_noS1.EXMIMO.Rel10 1 compilation Build lte_softmodem_noS1.ETHERNET.Rel10 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w ETHERNET -r Rel10 --noS1 -c $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko lte-softmodem_noS1.ETHERNET.Rel10 1 compilation Build lte_softmodem.USRP.Rel10 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -r Rel10 -c $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem lte-softmodem.USRP.Rel10 1 compilation Build lte_softmodem.EXMIMO.Rel10 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w EXMIMO -r Rel10 -c $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem $OPENAIR_DIR/cmake_targets/lte_build_oai/build/CMakeFiles/openair_rf/openair_rf.ko $OPENAIR_DIR/cmake_targets/lte_build_oai/build/updatefw $OPENAIR_DIR/cmake_targets/lte_build_oai/build/oarf_config_exmimo.oct lte-softmodem.EXMIMO.Rel10 1 compilation Build lte_softmodem.BLADERF.Rel10 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w BLADERF -r Rel10 -c $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem lte-softmodem.BLADERF.Rel10 1 compilation Build lte_softmodem.ETHERNET.Rel10 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w ETHERNET -r Rel10 -c $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem lte-softmodem.ETHERNET.Rel10 1 compilation Build phy unitary simulators + secuirity unitary tests $OPENAIR_DIR/cmake_targets/build_oai --phy_simulators --core_simulators -c $OPENAIR_DIR/cmake_targets/lte-simulators/build/dlsim $OPENAIR_DIR/cmake_targets/lte-simulators/build/ulsim $OPENAIR_DIR/cmake_targets/lte-simulators/build/pucchsim $OPENAIR_DIR/cmake_targets/lte-simulators/build/prachsim $OPENAIR_DIR/cmake_targets/lte-simulators/build/pdcchsim $OPENAIR_DIR/cmake_targets/lte-simulators/build/pbchsim $OPENAIR_DIR/cmake_targets/lte-simulators/build/mbmssim $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia1 $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_kenb $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_ctr_encrypt $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_ctr_decrypt $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eea2 $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eea1 $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_kdf $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_cmac_encrypt $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia2 unitary-sim.Rel10 1 compilation Build RRH Gateway $OPENAIR_DIR/cmake_targets/build_oai --RRH -w USRP -c $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw RRH.USRP.Rel10 1 compilation Build RRH Gateway $OPENAIR_DIR/cmake_targets/build_oai --RRH -w EXMIMO -c $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw $OPENAIR_DIR/cmake_targets/rrh_gw/build/CMakeFiles/openair_rf/openair_rf.ko $OPENAIR_DIR/cmake_targets/rrh_gw/build/updatefw $OPENAIR_DIR/cmake_targets/rrh_gw/build/oarf_config_exmimo.oct RRH.EXMIMO.Rel10 1 compilation Build RRH Gateway $OPENAIR_DIR/cmake_targets/build_oai --RRH -w BLADERF -c $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw RRH.BLADERF.Rel10 1 execution Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit $OPENAIR_DIR/cmake_targets/build_oai --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 1 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 1 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 2 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 2 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 2 oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2 "Received RRCConnectionReconfigurationComplete from UE 0" segmentation fault|assertion|exiting|fatal 3 execution Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit $OPENAIR_DIR/cmake_targets/build_oai --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1 -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 1 -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 1 -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 2 -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 2 -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 2 -a oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2 "Received RRCConnectionReconfigurationComplete from UE 0" segmentation fault|assertion|exiting|fatal 3 execution Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit $OPENAIR_DIR/cmake_targets/build_oai --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 1 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 1 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 1 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 2 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 2 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 2 oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2 "Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2" segmentation fault|assertion|exiting|fatal 3 execution Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit $OPENAIR_DIR/cmake_targets/build_oai --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 1 -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 1 -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 1 -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 2 -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 2 -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 2 -a oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_nos1.tdd.20MHz.TM2 "Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2" segmentation fault|assertion|exiting|fatal 3 execution Run OAI Rel10 TDD, 1 eNB + 1 UE (5 MHz) without abstraction mode, send ping from from eNB to UE, and check that there is no packet losses $OPENAIR_DIR/cmake_targets/build_oai --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 1 -c26 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 1 -c26 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 1 -c26 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 2 -c26 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 2 -c26 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 2 -c26 oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2 "DL and UL loss rate below 10" segmentation fault|assertion|exiting|fatal 3 execution Run OAI Rel10 TDD, 1 eNB + 1 UE (5 MHz) in PHY_ABSTRACTION mode, send ping from from eNB to UE, and check that there is no packet losses $OPENAIR_DIR/cmake_targets/build_oai --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 1 -c26 -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 1 -c26 -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 1 -c26 -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 2 -c26 -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 2 -c26 -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 2 -c26 -a oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2 "DL and UL loss rate below 10" segmentation fault|assertion|exiting|fatal 3 execution Run OAISIM Rel10 FDD, 1 eNB + 1 UE 1 eNB (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit $OPENAIR_DIR/cmake_targets/build_oai --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1 -F -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 1 -F -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 1 -F -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 2 -F -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 2 -F -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 2 -F oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2 "Received RRCConnectionReconfigurationComplete from UE 0" segmentation fault|assertion|exiting|fatal 3 execution Run OAISIM Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION mode and search for errors $OPENAIR_DIR/cmake_targets/build_oai --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1 -F -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 1 -F -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 1 -F -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 2 -F -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 2 -F -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 2 -F -a oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2 "Received RRCConnectionReconfigurationComplete from UE 0" segmentation fault|assertion|exiting|fatal 3 execution Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit $OPENAIR_DIR/cmake_targets/build_oai --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 1 -F -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 1 -F -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 1 -F -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 2 -F -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 2 -F -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 2 -F oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2 "Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2" segmentation fault|assertion|exiting|fatal 3 execution Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION mode and search for errors $OPENAIR_DIR/cmake_targets/build_oai --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 1 -F -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 1 -F -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 1 -F -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 2 -F -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 2 -F -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 2 -F -a oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2 "Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2" segmentation fault|assertion|exiting|fatal 3 execution Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) without PHY_ABSTRACTION mode, ping from from eNB to UE, and for check for no packet losses $OPENAIR_DIR/cmake_targets/build_oai --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1 -F -c26 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 1 -F -c26 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 1 -F -c26 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 2 -F -c26 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 2 -F -c26 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 2 -F -c26 oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2 "DL and UL loss rate below 10" segmentation fault|assertion|exiting|fatal 3 execution Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION mode, send ping from from eNB to UE, and check for no packet losses $OPENAIR_DIR/cmake_targets/build_oai --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1 -F -c26 -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 1 -F -c26 -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 1 -F -c26 -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 2 -F -c26 -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 2 -F -c26 -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 2 -F -c26 -a oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2 "DL and UL loss rate below 10" segmentation fault|assertion|exiting|fatal 3 execution Check if eMBMS procedure is not finished completely, make sure that the SIB13/MCCH have been correclty received by UEs $OPENAIR_DIR/cmake_targets/build_oai --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -l7 -x 1 -Q3 -n 100 -b1 -u1 "Found MBSFNAreaConfiguration from eNB 0" segmentation fault|assertion|exiting|fatal oaisim_noS1.eMBMS 3 execution Check if eMBMS multicast/broadcast data is received, make sure that the SIB13/MCCH/MTCH have been correclty received by UEs $OPENAIR_DIR/cmake_targets/build_oai --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -l7 -x 1 -T mscbr -Q3 -n 100 -b1 -u1 "Received a multicast packet" segmentation fault|assertion|exiting|fatal oaisim_noS1.eMBMS 3 execution Check for eMBMS multicast/broadcast data received in fdd mode, make sure that the SIB13/MCCH/MTCH have been correclty received by UEs $OPENAIR_DIR/cmake_targets/build_oai --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -l7 -F -T mscbr -x 1 -Q3 -n 100 -b1 -u1 "Received a multicast packet" segmentation fault|assertion|exiting|fatal oaisim_noS1.eMBMS 3 execution Check for eMBMS multicast/broadcast DF relaying working properly in fdd mode, make sure that the SIB13/MCCH/MTCH have been correclty received by UEs $OPENAIR_DIR/cmake_targets/build_oai --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -l7 -c43 -F -T mbvbr -Q4 -j1 -n120 "MTCH for sync area 1" segmentation fault|assertion|exiting|fatal oaisim_noS1.eMBMS 3 execution test_aes128_cmac_encrypt $OPENAIR_DIR/cmake_targets/build_oai --core_simulators -c $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_cmac_encrypt --verbose "finished with 0 errors" segmentation fault|assertion|exiting|fatal test_aes128_cmac_encrypt 3 execution test_aes128_ctr_decrypt $OPENAIR_DIR/cmake_targets/build_oai --core_simulators -c $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_ctr_decrypt --verbose "finished with 0 errors" segmentation fault|assertion|exiting|fatal test_aes128_ctr_decrypt 3 execution test_aes128_ctr_encrypt $OPENAIR_DIR/cmake_targets/build_oai --core_simulators -c $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_ctr_encrypt --verbose "finished with 0 errors" segmentation fault|assertion|exiting|fatal test_aes128_ctr_encrypt 3 execution test_secu_kenb $OPENAIR_DIR/cmake_targets/build_oai --core_simulators -c $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_kenb --verbose "finished with 0 errors" segmentation fault|assertion|exiting|fatal test_secu_kenb 3 execution test_secu_knas $OPENAIR_DIR/cmake_targets/build_oai --core_simulators -c $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas --verbose "finished with 0 errors" segmentation fault|assertion|exiting|fatal test_secu_knas 3 execution test_secu_knas_encrypt_eea1 $OPENAIR_DIR/cmake_targets/build_oai --core_simulators -c $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eea1 --verbose "finished with 0 errors" segmentation fault|assertion|exiting|fatal test_secu_knas_encrypt_eea1 3 execution test_secu_knas_encrypt_eea2 $OPENAIR_DIR/cmake_targets/build_oai --core_simulators -c $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eea2 --verbose "finished with 0 errors" segmentation fault|assertion|exiting|fatal test_secu_knas_encrypt_eea2 3 execution test_secu_knas_encrypt_eia1 $OPENAIR_DIR/cmake_targets/build_oai --core_simulators -c $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia1 --verbose "finished with 0 errors" segmentation fault|assertion|exiting|fatal test_secu_knas_encrypt_eia1 3 execution test_secu_knas_encrypt_eia2 $OPENAIR_DIR/cmake_targets/build_oai --core_simulators -c $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia1 --verbose "finished with 0 errors" segmentation fault|assertion|exiting|fatal test_secu_knas_encrypt_eia2 3 execution test_kdf $OPENAIR_DIR/cmake_targets/build_oai --core_simulators -c $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_kdf --verbose "finished with 0 errors" segmentation fault|assertion|exiting|fatal test_kdf 3 execution dlsim test cases (Test 1: 10 MHz, R2.FDD (MCS 5), EVA5, -1dB), (Test 5: 1.4 MHz, R4.FDD (MCS 4), EVA5, 0dB (70%)), (Test 6, 10 MHz, R3.FDD (MCS 15), EVA5, 6.7dB (70%)), (Test 6b, 5 MHz, R3-1.FDD (MCS 15), EVA5, 6.7dB (70%)), (Test 7, 5 MHz, R3-1.FDD (MCS 15), EVA5, 6.7dB (30%)), (Test 7b, 5 MHz, R3-1.FDD (MCS 15), ETU70, 1.4 dB (30%)), (Test 10, 5 MHz, R6.FDD (MCS 25), EVA5, 17.4 dB (70%)), (Test 10b, 5 MHz, R6-1.FDD (MCS 24,18 PRB), EVA5, 17.5dB (70%)), (Test 11, 10 MHz, R7.FDD (MCS 25), EVA5, 17.7dB (70%)) (TM2 Test 1 10 MHz, R.11 FDD (MCS 14), EVA5, 6.8 dB (70%)), (TM2 Test 1b 20 MHz, R.11-2 FDD (MCS 13), EVA5, 5.9 dB (70%)), $OPENAIR_DIR/cmake_targets/build_oai --phy_simulators -c $OPENAIR_DIR/cmake_targets/lte-simulators/build/dlsim -m5 -gF -s-1 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70 -L -m4 -gF -s0 -w1.0 -f.2 -n500 -B6 -c4 -z2 -O70 -m15 -gF -s6.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70 -L -m14 -gF -s6.7 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O70 -L -m15 -gG -s6.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O30 -L -m14 -gG -s1.4 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O30 -L -m25 -gF -s17.4 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O70 -L -m25 -gF -s17.5 -w1.0 -f.2 -n500 -B25 -c3 -z2 -r1022 -O70 -L -m26 -gF -s17.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70 -L -m14 -gF -s6.8 -w1.0 -f.2 -n500 -B50 -c2 -x2 -y2 -z2 -O70 -L -m13 -gF -s5.9 -w1.0 -f.2 -n500 -B25 -c3 -x2 -y2 -z2 -O70 -L dlsim.test1 dlsim.test5 dlsim.test6 dlsim.test6b dlsim.test7 dlsim.test7b dlsim.test10 dlsim.test10b dlsim.test11 dlsim.TM2_test1 dlsim.TM2_test1b "passed" segmentation fault|assertion|exiting|fatal 3 execution ulsim Test cases. (Test 1, 5 MHz, FDD (MCS 5), AWGN, 6dB), (Test 2, 5 MHz, FDD (MCS 16), AWGN , 12dB (70%)), (Test 3, 10 MHz, R3.FDD (MCS 5), AWGN, 6dB (70%)), (Test 4, 10 MHz, R3-1.FDD (MCS 16), AWGN, 12dB (70%)), (Test 5, 20 MHz, FDD (MCS 5), AWGN, 6dB (70%)), (Test 6, 20 MHz, FDD (MCS 16), AWGN, 12 dB (70%)) $OPENAIR_DIR/cmake_targets/build_oai --phy_simulators -c $OPENAIR_DIR/cmake_targets/lte-simulators/build/ulsim -B25 -m5 -y1 -gN -x1 -s6 -w1.0 -e.1 -P -n500 -O70 -L -B25 -m16 -y1 -gN -x1 -s12 -w1.0 -e.1 -P -n500 -O70 -L -B50 -m5 -y1 -gN -x1 -s6 -w1.0 -e.1 -P -n500 -O70 -L -B50 -m16 -y1 -gN -x1 -s12 -w1.0 -e.1 -P -n500 -O70 -L -B100 -m5 -y1 -gN -x1 -s6 -w1.0 -e.1 -P -n500 -O70 -L -B100 -m16 -y1 -gN -x1 -s12 -w1.0 -e.1 -P -n500 -O70 -L ulsim.test1 ulsim.test2 ulsim.test3 ulsim.test4 ulsim.test5 ulsim.test6 "passed" segmentation fault|assertion|exiting|fatal 3 lte-softmodem calisson stevens amerique 360 /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 130 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf True /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 300 -B 192.172.0.2 True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" SCRIPTS/build_epc -c -l SCRIPTS/build_hss -c -l /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec duration=300.0s True USRPb210.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX 10 lte-softmodem calisson stevens amerique 360 /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 130 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf True /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 300 -B 192.172.0.2 True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" SCRIPTS/build_epc -c -l SCRIPTS/build_hss -c -l /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 throughput_test min=2.0Mbits/sec max=2.0Mbits/sec average=2.0Mbits/sec duration=300.0s True USRPb210.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX 10 lte-softmodem calisson stevens amerique 360 /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 130 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf True /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 300 -B 192.172.0.2 True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" SCRIPTS/build_epc -c -l SCRIPTS/build_hss -c -l /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 throughput_test min=4.0Mbits/sec max=4.0Mbits/sec average=4.0Mbits/sec duration=300.0s True USRPb210.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX 10 lte-softmodem calisson stevens amerique 360 /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 130 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf True /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec duration=60.0s /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" SCRIPTS/build_epc -c -l SCRIPTS/build_hss -c -l /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 300 -B 192.172.0.1 True USRPb210.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX 10 lte-softmodem calisson stevens amerique 360 /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 130 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf True /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec duration=300.0s True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" SCRIPTS/build_epc -c -l SCRIPTS/build_hss -c -l /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 300 -B 192.172.0.1 True USRPb210.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX 10 lte-softmodem calisson stevens amerique 360 /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 130 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf True /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec duration=300.0s True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" SCRIPTS/build_epc -c -l SCRIPTS/build_hss -c -l /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 300 -B 192.172.0.1 True USRPb210.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX 10 lte-softmodem calisson stevens amerique 360 /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 130 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf True /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 300 -B 192.172.0.2 True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" SCRIPTS/build_epc -c -l SCRIPTS/build_hss -c -l /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec duration=300.0s True USRPb210.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.2TX.2RX 10 lte-softmodem calisson stevens amerique 360 /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 130 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf True /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 300 -B 192.172.0.2 True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" SCRIPTS/build_epc -c -l SCRIPTS/build_hss -c -l /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 throughput_test min=2.0Mbits/sec max=2.0Mbits/sec average=2.0Mbits/sec duration=300.0s True USRPb210.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.2TX.2RX 10 lte-softmodem calisson stevens amerique 360 /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 130 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf True /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 300 -B 192.172.0.2 True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" SCRIPTS/build_epc -c -l SCRIPTS/build_hss -c -l /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 throughput_test min=4.0Mbits/sec max=4.0Mbits/sec average=4.0Mbits/sec duration=300.0s True USRPb210.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.2TX.2RX 10 lte-softmodem calisson stevens amerique 360 /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 130 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf True /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec duration=300.0s True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" SCRIPTS/build_epc -c -l SCRIPTS/build_hss -c -l /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 300 -B 192.172.0.1 True USRPb210.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.2TX.2RX 10 lte-softmodem calisson stevens amerique 360 /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 130 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf True /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec duration=300.0s True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" SCRIPTS/build_epc -c -l SCRIPTS/build_hss -c -l /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 300 -B 192.172.0.1 True USRPb210.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.2TX.2RX 10 lte-softmodem calisson stevens amerique 360 /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 130 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf True /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec duration=300.0s True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" SCRIPTS/build_epc -c -l SCRIPTS/build_hss -c -l /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 300 -B 192.172.0.1 True USRPb210.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.2TX.2RX 10 lte-softmodem mozart stevens amerique 360 /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf N_RB_DL 25 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_tx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf True /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 300 -B 192.172.0.2 True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" SCRIPTS/build_epc -c -l SCRIPTS/build_hss -c -l /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec duration=300.0s True USRPx310.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX 10 lte-softmodem mozart stevens amerique 360 /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310..conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf N_RB_DL 50 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf nb_antennas_tx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf True /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 300 -B 192.172.0.2 True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" SCRIPTS/build_epc -c -l SCRIPTS/build_hss -c -l /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 throughput_test min=2.0Mbits/sec max=2.0Mbits/sec average=2.0Mbits/sec duration=300.0s True USRPx310.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX 10 lte-softmodem mozart stevens amerique 360 /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf N_RB_DL 100 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf nb_antennas_tx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf True /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 300 -B 192.172.0.2 True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" SCRIPTS/build_epc -c -l SCRIPTS/build_hss -c -l /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 throughput_test min=4.0Mbits/sec max=4.0Mbits/sec average=4.0Mbits/sec duration=300.0s True USRPx310.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX 10 lte-softmodem mozart stevens amerique 360 /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf N_RB_DL 25 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_tx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf True /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec duration=300.0s /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" SCRIPTS/build_epc -c -l SCRIPTS/build_hss -c -l /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 300 -B 192.172.0.1 True USRPx310.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX 10 lte-softmodem mozart stevens amerique 360 /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf N_RB_DL 50 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf nb_antennas_tx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf True /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec duration=300.0s /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" SCRIPTS/build_epc -c -l SCRIPTS/build_hss -c -l /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 300 -B 192.172.0.1 True USRPx310.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX 10 lte-softmodem mozart stevens amerique 360 /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf N_RB_DL 100 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf nb_antennas_tx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf True /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec duration=300.0s /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" SCRIPTS/build_epc -c -l SCRIPTS/build_hss -c -l /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 300 -B 192.172.0.1 True USRPx310.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX 10 lte-softmodem calisson stevens amerique 360 /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 25 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w EXMIMO -x -c sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2; dmesg|tail $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf True /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 300 -B 192.172.0.2 True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" SCRIPTS/build_epc -c -l SCRIPTS/build_hss -c -l /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec duration=300.0s True EXMIMO.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX 10 lte-softmodem calisson stevens amerique 360 /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 50 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w EXMIMO -x -c sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf True /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 300 -B 192.172.0.2 True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" SCRIPTS/build_epc -c -l SCRIPTS/build_hss -c -l /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 throughput_test min=2.0Mbits/sec max=2.0Mbits/sec average=2.0Mbits/sec duration=300.0s True EXMIMO.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX 10 lte-softmodem calisson stevens amerique 360 /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 100 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w EXMIMO -x -c sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf True /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 300 -B 192.172.0.2 True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" SCRIPTS/build_epc -c -l SCRIPTS/build_hss -c -l /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 throughput_test min=4.0Mbits/sec max=4.0Mbits/sec average=4.0Mbits/sec duration=300.0s True EXMIMO.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX 10 lte-softmodem calisson stevens amerique 360 /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 25 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w EXMIMO -x -c sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf True /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec duration=300.0s /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" SCRIPTS/build_epc -c -l SCRIPTS/build_hss -c -l /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 300 -B 192.172.0.1 True EXMIMO.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX 10 lte-softmodem calisson stevens amerique 360 /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 50 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w EXMIMO -x -c sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf True /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec duration=300.0s /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" SCRIPTS/build_epc -c -l SCRIPTS/build_hss -c -l /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 300 -B 192.172.0.1 True EXMIMO.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX 10 lte-softmodem calisson stevens amerique 360 /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 100 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w EXMIMO -x -c sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf True /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec duration=300.0s /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" SCRIPTS/build_epc -c -l SCRIPTS/build_hss -c -l /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 300 -B 192.172.0.1 True EXMIMO.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX 10 lte-softmodem calisson stevens nano 60 /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -c $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf iperf -s True /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue ping 192.172.0.1 True /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" BUILD/EPC/epc.conf.in MCC \"208\" BUILD/EPC/epc.conf.in MNC \"92\" BUILD/EPC/epc.conf.in TAC \"1\" BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\" BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\" BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\" SCRIPTS/build_epc -c -l SCRIPTS/build_hss -c /SCRIPTS/run_epc -g /SCRIPTS/run_hss -g iperf -s True 10 lte-softmodem calisson stevens calisson 60 /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf N_RB_DL 50 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -c $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf True /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue ping 192.172.0.1 True /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" BUILD/EPC/epc.conf.in MCC \"208\" BUILD/EPC/epc.conf.in MNC \"92\" BUILD/EPC/epc.conf.in TAC \"1\" BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\" BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\" BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\" BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\" SCRIPTS/build_epc -c -l SCRIPTS/build_hss -c -l SCRIPTS/run_epc -l SCRIPTS/run_hss iperf -s True 10