#!/bin/bash #/* # * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more # * contributor license agreements. See the NOTICE file distributed with # * this work for additional information regarding copyright ownership. # * The OpenAirInterface Software Alliance licenses this file to You under # * the OAI Public License, Version 1.1 (the "License"); you may not use this file # * except in compliance with the License. # * You may obtain a copy of the License at # * # * http://www.openairinterface.org/?page_id=698 # * # * Unless required by applicable law or agreed to in writing, software # * distributed under the License is distributed on an "AS IS" BASIS, # * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # * See the License for the specific language governing permissions and # * limitations under the License. # *------------------------------------------------------------------------------- # * For more information about the OpenAirInterface (OAI) Software Alliance: # * contact@openairinterface.org # */ function report_test_usage { echo "OAI CI VM script" echo " Original Author: Raphael Defosseux" echo "" echo "Usage:" echo "------" echo " oai-ci-vm-tool report-test [OPTIONS]" echo "" command_options_usage } function analyzePingFiles { for PING_CASE in $PING_LOGS do echo " " >> ./test_simulator_results.html NAME=`echo $PING_CASE | sed -e "s#$ARCHIVES_LOC/##"` echo " $NAME" >> ./test_simulator_results.html CMD=`egrep "COMMAND IS" $PING_CASE | sed -e "s#COMMAND IS: ##"` echo " $CMD" >> ./test_simulator_results.html FILE_COMPLETE=`egrep -c "ping statistics" $PING_CASE` if [ $FILE_COMPLETE -eq 0 ] then echo " KO" >> ./test_simulator_results.html echo " N/A" >> ./test_simulator_results.html else NB_TR_PACKETS=`egrep "packets transmitted" $PING_CASE | sed -e "s# packets transmitted.*##"` NB_RC_PACKETS=`egrep "packets transmitted" $PING_CASE | sed -e "s#^.*packets transmitted, ##" -e "s# received,.*##"` if [ $NB_TR_PACKETS -eq $NB_RC_PACKETS ] then echo " OK" >> ./test_simulator_results.html else echo " KO" >> ./test_simulator_results.html fi echo " " >> ./test_simulator_results.html echo " 
" >> ./test_simulator_results.html
            STATS=`egrep "packets transmitted" $PING_CASE | sed -e "s#^.*received, ##" -e "s#, time.*##" -e "s# packet loss##"`
            echo "Packet Loss : $STATS" >> ./test_simulator_results.html
            RTTMIN=`egrep "rtt min" $PING_CASE | awk '{split($4,a,"/"); print a[1] " " $5}'`
            echo "RTT Minimal : $RTTMIN" >> ./test_simulator_results.html
            RTTAVG=`egrep "rtt min" $PING_CASE | awk '{split($4,a,"/"); print a[2] " " $5}'`
            echo "RTT Average : $RTTAVG" >> ./test_simulator_results.html
            RTTMAX=`egrep "rtt min" $PING_CASE | awk '{split($4,a,"/"); print a[3] " " $5}'`
            echo "RTT Maximal : $RTTMAX" >> ./test_simulator_results.html
            echo "
" >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html fi echo " " >> ./test_simulator_results.html done } function analyzeIperfFiles { for IPERF_CASE in $IPERF_TESTS do echo " " >> ./test_simulator_results.html NAME=`echo $IPERF_CASE | sed -e "s#$ARCHIVES_LOC/##"` echo " $NAME" >> ./test_simulator_results.html CMD=`egrep "COMMAND IS" $IPERF_CASE | sed -e "s#COMMAND IS: ##"` echo " $CMD" >> ./test_simulator_results.html REQ_BITRATE=`echo $CMD | sed -e "s#^.*-b ##" -e "s#-i 1.*##"` if [[ $REQ_BITRATE =~ .*K.* ]] then REQ_BITRATE=`echo $REQ_BITRATE | sed -e "s#K##"` FLOAT_REQ_BITRATE=`echo "$REQ_BITRATE * 1000.0" | bc -l` fi if [[ $REQ_BITRATE =~ .*M.* ]] then REQ_BITRATE=`echo $REQ_BITRATE | sed -e "s#M##"` FLOAT_REQ_BITRATE=`echo "$REQ_BITRATE * 1000000.0" | bc -l` fi if [[ $REQ_BITRATE =~ .*G.* ]] then REQ_BITRATE=`echo $REQ_BITRATE | sed -e "s#G##"` FLOAT_REQ_BITRATE=`echo "$REQ_BITRATE * 1000000000.0" | bc -l` fi FILE_COMPLETE=`egrep -c "Server Report" $IPERF_CASE` if [ $FILE_COMPLETE -eq 0 ] then SERVER_FILE=`echo $IPERF_CASE | sed -e "s#client#server#"` FLOAT_EFF_BITRATE=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*Bytes *##" -e "s#sec *.*#sec#" | awk 'BEGIN{s=0;n=0}{n++;if ($2 ~/Mbits/){a = $1 * 1000000};if ($2 ~/Kbits/){a = $1 * 1000};s=s+a}END{br=s/n; printf "%.0f", br}'` EFFECTIVE_BITRATE=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*Bytes *##" -e "s#sec *.*#sec#" | awk 'BEGIN{s=0;n=0}{n++;if ($2 ~/Mbits/){a = $1 * 1000000};if ($2 ~/Kbits/){a = $1 * 1000};s=s+a}END{br=s/n; if(br>1000000){printf "%.2f MBits/sec", br/1000000}else{printf "%.2f KBits/sec", br/1000}}'` PERF=`echo "100 * $FLOAT_EFF_BITRATE / $FLOAT_REQ_BITRATE" | bc -l | awk '{printf "%.2f", $0}'` PERF_INT=`echo "100 * $FLOAT_EFF_BITRATE / $FLOAT_REQ_BITRATE" | bc -l | awk '{printf "%.0f", $0}'` JITTER=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*/sec *##" -e "s# *ms.*##" | awk 'BEGIN{s=0;n=0}{n++;s+=$1}END{jitter=s/n; printf "%.3f ms", jitter}'` PACKETLOSS_NOSIGN=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*(##" -e "s#%.*##" | awk 'BEGIN{s=0;n=0}{n++;s+=$1}END{per=s/n; printf "%.1f", per}'` PACKETLOSS=`echo "${PACKETLOSS_NOSIGN}%"` if [[ $PERF_INT -lt 80 ]] then echo " KO" >> ./test_simulator_results.html else echo " OK" >> ./test_simulator_results.html fi else EFFECTIVE_BITRATE=`tail -n3 $IPERF_CASE | egrep "bits/sec" | sed -e "s#^.*Bytes *##" -e "s#sec.*#sec#"` if [[ $EFFECTIVE_BITRATE =~ .*Kbits/sec.* ]] then EFFECTIVE_BITRATE=`echo $EFFECTIVE_BITRATE | sed -e "s# *Kbits/sec.*##"` FLOAT_EFF_BITRATE=`echo "$EFFECTIVE_BITRATE * 1000" | bc -l` fi if [[ $EFFECTIVE_BITRATE =~ .*Mbits/sec.* ]] then EFFECTIVE_BITRATE=`echo $EFFECTIVE_BITRATE | sed -e "s# *Mbits/sec.*##"` FLOAT_EFF_BITRATE=`echo "$EFFECTIVE_BITRATE * 1000000" | bc -l` fi if [[ $EFFECTIVE_BITRATE =~ .*Gbits/sec.* ]] then EFFECTIVE_BITRATE=`echo $EFFECTIVE_BITRATE | sed -e "s# *Gbits/sec.*##"` FLOAT_EFF_BITRATE=`echo "$EFFECTIVE_BITRATE * 1000000000" | bc -l` fi PERF=`echo "100 * $FLOAT_EFF_BITRATE / $FLOAT_REQ_BITRATE" | bc -l | awk '{printf "%.2f", $0}'` PERF_INT=`echo "100 * $FLOAT_EFF_BITRATE / $FLOAT_REQ_BITRATE" | bc -l | awk '{printf "%.0f", $0}'` if [[ $PERF_INT -lt 70 ]] then echo " KO" >> ./test_simulator_results.html else echo " OK" >> ./test_simulator_results.html fi EFFECTIVE_BITRATE=`tail -n3 $IPERF_CASE | egrep "bits/sec" | sed -e "s#^.*Bytes *##" -e "s#sec.*#sec#"` JITTER=`tail -n3 $IPERF_CASE | egrep "bits/sec" | sed -e "s#^.*bits/sec *##" -e "s#ms.*#ms#"` PACKETLOSS=`tail -n3 $IPERF_CASE | egrep "bits/sec" | sed -e "s#^.*(##" -e "s#).*##"` fi echo " " >> ./test_simulator_results.html echo " 
" >> ./test_simulator_results.html
        echo "Bitrate      : $EFFECTIVE_BITRATE" >> ./test_simulator_results.html
        echo "Bitrate Perf : $PERF %" >> ./test_simulator_results.html
        echo "Jitter       : $JITTER" >> ./test_simulator_results.html
        echo "Packet Loss  : $PACKETLOSS" >> ./test_simulator_results.html
        echo "
" >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html done } function report_test { echo "############################################################" echo "OAI CI VM script" echo "############################################################" echo "JENKINS_WKSP = $JENKINS_WKSP" cd ${JENKINS_WKSP} echo "" > ./test_simulator_results.html echo "" >> ./test_simulator_results.html echo "" >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " Simulator Results for $JOB_NAME job build #$BUILD_ID" >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo "" >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " \"\"" >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " Job Summary -- Job: $JOB_NAME -- Build-ID: $BUILD_ID" >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html if [ $PU_TRIG -eq 1 ]; then echo " " >> ./test_simulator_results.html; fi if [ $MR_TRIG -eq 1 ]; then echo " " >> ./test_simulator_results.html; fi echo " " >> ./test_simulator_results.html if [ $PU_TRIG -eq 1 ] then echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html if [ -e .git/CI_COMMIT_MSG ] then echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html MSG=`cat .git/CI_COMMIT_MSG` echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html fi fi if [ $MR_TRIG -eq 1 ] then echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html if [ -e .git/CI_COMMIT_MSG ] then echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html MSG=`cat .git/CI_COMMIT_MSG` echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html fi echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html fi echo "
Build Start Time (UTC)TEMPLATE_BUILD_TIME
GIT Repository$GIT_URL
Job TriggerPush EventMerge-Request
Branch$SOURCE_BRANCH
Commit ID$SOURCE_COMMIT_ID
Commit Message$MSG
Source Branch$SOURCE_BRANCH
Source Commit ID$SOURCE_COMMIT_ID
Commit Message$MSG
Target Branch$TARGET_BRANCH
Target Commit ID$TARGET_COMMIT_ID
" >> ./test_simulator_results.html echo "

Test Summary

" >> ./test_simulator_results.html ARCHIVES_LOC=archives/basic_sim/test if [ -d $ARCHIVES_LOC ] then echo "

4G LTE Basic Simulator Check

" >> ./test_simulator_results.html if [ -f $ARCHIVES_LOC/test_final_status.log ] then if [ `grep -c TEST_OK $ARCHIVES_LOC/test_final_status.log` -eq 1 ] then echo "
" >> ./test_simulator_results.html echo " TEST was SUCCESSFUL " >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html else echo "
" >> ./test_simulator_results.html echo " TEST was a FAILURE! " >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html fi else echo "
" >> ./test_simulator_results.html echo " COULD NOT DETERMINE TEST FINAL STATUS! " >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html fi echo " " >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html TRANS_MODES=("fdd" "tdd") BW_CASES=(05 10 20) for TMODE in ${TRANS_MODES[@]} do echo " " >> ./test_simulator_results.html if [[ $TMODE =~ .*fdd.* ]] then echo " " >> ./test_simulator_results.html else echo " " >> ./test_simulator_results.html fi echo " " >> ./test_simulator_results.html for BW in ${BW_CASES[@]} do ENB_LOG=$ARCHIVES_LOC/${TMODE}_${BW}MHz_enb.log UE_LOG=`echo $ENB_LOG | sed -e "s#enb#ue#"` if [ -f $ENB_LOG ] && [ -f $UE_LOG ] then NAME_ENB=`echo $ENB_LOG | sed -e "s#$ARCHIVES_LOC/##"` NAME_UE=`echo $UE_LOG | sed -e "s#$ARCHIVES_LOC/##"` echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html NB_ENB_GOT_SYNC=`egrep -c "got sync" $ENB_LOG` NB_UE_GOT_SYNC=`egrep -c "got sync" $UE_LOG` NB_ENB_SYNCED_WITH_UE=`egrep -c "got UE capabilities for UE" $ENB_LOG` if [ $NB_ENB_GOT_SYNC -eq 1 ] && [ $NB_UE_GOT_SYNC -eq 2 ] && [ $NB_ENB_SYNCED_WITH_UE -eq 1 ] then echo " " >> ./test_simulator_results.html else echo " " >> ./test_simulator_results.html fi echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html fi PING_LOGS=`ls $ARCHIVES_LOC/${TMODE}_${BW}MHz_ping_ue.txt 2> /dev/null` analyzePingFiles IPERF_TESTS=`ls $ARCHIVES_LOC/${TMODE}_${BW}*iperf*client*txt 2> /dev/null` analyzeIperfFiles done done echo "
Log File NameCommandStatusStatistics
Test in FDDTest in TDD
$NAME_ENB --- $NAME_UEN/AOKKO
" >> ./test_simulator_results.html
                    if [ $NB_ENB_GOT_SYNC -eq 1 ]
                    then
                        echo "- eNB --> got sync" >> ./test_simulator_results.html
                    else
                        echo "- eNB NEVER got sync" >> ./test_simulator_results.html
                    fi
                    if [ $NB_UE_GOT_SYNC -eq 2 ]
                    then
                        echo "- UE --> got sync" >> ./test_simulator_results.html
                    else
                        echo "- UE NEVER got sync" >> ./test_simulator_results.html
                    fi
                    if [ $NB_ENB_SYNCED_WITH_UE -eq 1 ]
                    then
                        echo "- UE attached to eNB" >> ./test_simulator_results.html
                    else
                        echo "- UE NEVER attached to eNB" >> ./test_simulator_results.html
                    fi
                    NB_SEGFAULT_ENB=`egrep -i -c "Segmentation Fault" $ENB_LOG`
                    if [ $NB_SEGFAULT_ENB -ne 0 ]
                    then
                        echo "- eNB --> Segmentation Fault" >> ./test_simulator_results.html
                    fi
                    NB_SEGFAULT_UE=`egrep -i -c "Segmentation Fault" $UE_LOG`
                    if [ $NB_SEGFAULT_UE -ne 0 ]
                    then
                        echo "- UE --> Segmentation Fault" >> ./test_simulator_results.html
                    fi
                    NB_ASSERTION_ENB=`egrep -i -c "Assertion" $ENB_LOG`
                    if [ $NB_ASSERTION_ENB -ne 0 ]
                    then
                        echo "- eNB --> Assertion" >> ./test_simulator_results.html
                        awk 'BEGIN{assertion=10}{if(assertion < 3){print "    " $0; assertion++};if ($0 ~/Assertion/){print "    " $0;assertion=1}}END{}' $ENB_LOG >> ./test_simulator_results.html
                    fi
                    NB_ASSERTION_UE=`egrep -i -c "Assertion" $UE_LOG`
                    if [ $NB_ASSERTION_UE -ne 0 ]
                    then
                        echo "- eNB --> Assertion" >> ./test_simulator_results.html
                        awk 'BEGIN{assertion=10}{if(assertion < 3){print "    " $0; assertion++};if ($0 ~/Assertion/){print "    " $0;assertion=1}}END{}' $UE_LOG >> ./test_simulator_results.html
                    fi
                    echo "
" >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html fi if [ -e $JENKINS_WKSP/flexran/flexran_build_complete.txt ] then echo "

4G LTE Basic Simulator + FlexRan Controller Check

" >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html echo " TEST was SUCCESSFUL " >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html FLEXRAN_QUERIES=`ls $ARCHIVES_LOC/flexran_ctl_query_*log` for QUERY in $FLEXRAN_QUERIES do echo " " >> ./test_simulator_results.html NAME=`echo $QUERY | sed -e "s#$ARCHIVES_LOC/##"` echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html done echo "
Log File NameJSON Query Response
$NAME
" >> ./test_simulator_results.html
            egrep -v "LOG_NAME|\-\-\-\-\-" $QUERY >> ./test_simulator_results.html
            echo "
" >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html fi ARCHIVES_LOC=archives/rf_sim/test if [ -d $ARCHIVES_LOC ] then echo "

4G LTE RF Simulator Check

" >> ./test_simulator_results.html if [ -f $ARCHIVES_LOC/test_final_status.log ] then if [ `egrep -c "LTE: TEST_OK" $ARCHIVES_LOC/test_final_status.log` -eq 1 ] then echo "
" >> ./test_simulator_results.html echo " TEST was SUCCESSFUL " >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html else echo "
" >> ./test_simulator_results.html echo " TEST was a FAILURE! " >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html fi else echo "
" >> ./test_simulator_results.html echo " COULD NOT DETERMINE TEST FINAL STATUS! " >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html fi echo " " >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html EPC_CONFIGS=("wS1 noS1") TRANS_MODES=("fdd") BW_CASES=(05 10) for CN_CONFIG in ${EPC_CONFIGS[@]} do for TMODE in ${TRANS_MODES[@]} do for BW in ${BW_CASES[@]} do echo " " >> ./test_simulator_results.html if [[ $CN_CONFIG =~ .*wS1.* ]] then echo " " >> ./test_simulator_results.html else echo " " >> ./test_simulator_results.html fi echo " " >> ./test_simulator_results.html ENB_LOG=$ARCHIVES_LOC/${TMODE}_${BW}MHz_${CN_CONFIG}_enb.log UE_LOG=`echo $ENB_LOG | sed -e "s#enb#ue#"` if [ -f $ENB_LOG ] && [ -f $UE_LOG ] then NAME_ENB=`echo $ENB_LOG | sed -e "s#$ARCHIVES_LOC/##"` NAME_UE=`echo $UE_LOG | sed -e "s#$ARCHIVES_LOC/##"` echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html NB_ENB_GOT_SYNC=`egrep -c "got sync" $ENB_LOG` if [[ $CN_CONFIG =~ .*noS1.* ]] then NB_ENB_TUNNEL_UP=`egrep -c "Interface oaitun_enb1 successfully configured" $ENB_LOG` fi NB_UE_GOT_SYNC=`egrep -c "rfsimulator: Success" $UE_LOG` NB_ENB_SYNCED_WITH_UE=`egrep -c "Generating RRCConnectionReconfigurationComplete" $UE_LOG` if [[ $CN_CONFIG =~ .*noS1.* ]] then NB_UE_TUNNEL_UP=`egrep -c "Interface oaitun_ue1 successfully configured" $UE_LOG` else NB_UE_TUNNEL_UP=`egrep -c "executing ifconfig oaitun_ue1" $UE_LOG` fi if [ $NB_ENB_GOT_SYNC -gt 0 ] && [ $NB_UE_GOT_SYNC -gt 0 ] && [ $NB_ENB_SYNCED_WITH_UE -gt 0 ] then echo " " >> ./test_simulator_results.html else echo " " >> ./test_simulator_results.html fi echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html fi PING_LOGS=`ls $ARCHIVES_LOC/${TMODE}_${BW}MHz_${CN_CONFIG}_ping*.log 2> /dev/null` analyzePingFiles IPERF_TESTS=`ls $ARCHIVES_LOC/${TMODE}_${BW}MHz_${CN_CONFIG}_iperf_dl*client*txt | grep -v mbms 2> /dev/null` analyzeIperfFiles IPERF_TESTS=`ls $ARCHIVES_LOC/${TMODE}_${BW}MHz_${CN_CONFIG}_iperf_ul*client*txt | grep -v mbms 2> /dev/null` analyzeIperfFiles done done done # MBMS Case CN_CONFIG="noS1" TMODE="fdd" BW_CASES=(05) for BW in ${BW_CASES[@]} do echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html ENB_LOG=$ARCHIVES_LOC/${TMODE}_${BW}MHz_${CN_CONFIG}_enb_mbms.log UE_LOG=`echo $ENB_LOG | sed -e "s#enb#ue#"` if [ -f $ENB_LOG ] && [ -f $UE_LOG ] then NAME_ENB=`echo $ENB_LOG | sed -e "s#$ARCHIVES_LOC/##"` NAME_UE=`echo $UE_LOG | sed -e "s#$ARCHIVES_LOC/##"` echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html NB_ENB_GOT_SYNC=`egrep -c "got sync" $ENB_LOG` NB_ENB_TUNNEL_UP=`egrep -c "Interface oaitun_enb1 successfully configured" $ENB_LOG` NB_ENB_MTUNNEL_UP=`egrep -c "Interface oaitun_enm1 successfully configured" $ENB_LOG` NB_UE_GOT_SYNC=`egrep -c "rfsimulator: Success" $UE_LOG` NB_ENB_SYNCED_WITH_UE=`egrep -c "Generating RRCConnectionReconfigurationComplete" $UE_LOG` NB_UE_TUNNEL_UP=`egrep -c "Interface oaitun_ue1 successfully configured" $UE_LOG` NB_UE_MTUNNEL_UP=`egrep -c "Interface oaitun_uem1 successfully configured" $UE_LOG` NB_UE_MBMS_PUSH_MSG=`egrep -c "TRIED TO PUSH MBMS DATA TO" $UE_LOG` if [ $NB_ENB_GOT_SYNC -gt 0 ] && [ $NB_UE_GOT_SYNC -gt 0 ] && [ $NB_ENB_SYNCED_WITH_UE -gt 0 ] && [ $NB_UE_MBMS_PUSH_MSG -gt 0 ] then echo " " >> ./test_simulator_results.html else echo " " >> ./test_simulator_results.html fi echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html fi #PING_LOGS=`ls $ARCHIVES_LOC/${TMODE}_${BW}MHz_${CN_CONFIG}_ping*.log 2> /dev/null` #analyzePingFiles #IPERF_TESTS=`ls $ARCHIVES_LOC/${TMODE}_${BW}MHz_${CN_CONFIG}_iperf_dl*client*txt | grep -v mbms 2> /dev/null` #analyzeIperfFiles #IPERF_TESTS=`ls $ARCHIVES_LOC/${TMODE}_${BW}MHz_${CN_CONFIG}_iperf_ul*client*txt | grep -v mbms 2> /dev/null` #analyzeIperfFiles done # FeMBMS Case CN_CONFIG="noS1" TMODE="fdd" BW_CASES=(05) for BW in ${BW_CASES[@]} do echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html ENB_LOG=$ARCHIVES_LOC/${TMODE}_${BW}MHz_${CN_CONFIG}_enb_fembms.log UE_LOG=`echo $ENB_LOG | sed -e "s#enb#ue#"` if [ -f $ENB_LOG ] && [ -f $UE_LOG ] then NAME_ENB=`echo $ENB_LOG | sed -e "s#$ARCHIVES_LOC/##"` NAME_UE=`echo $UE_LOG | sed -e "s#$ARCHIVES_LOC/##"` echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html #NB_ENB_GOT_SYNC=`egrep -c "got sync" $ENB_LOG` NB_ENB_TUNNEL_UP=`egrep -c "Interface oaitun_enb1 successfully configured" $ENB_LOG` NB_ENB_MTUNNEL_UP=`egrep -c "Interface oaitun_enm1 successfully configured" $ENB_LOG` #NB_UE_GOT_SYNC=`egrep -c "rfsimulator: Success" $UE_LOG` #NB_ENB_SYNCED_WITH_UE=`egrep -c "Generating RRCConnectionReconfigurationComplete" $UE_LOG` NB_UE_TUNNEL_UP=`egrep -c "Interface oaitun_ue1 successfully configured" $UE_LOG` NB_UE_MTUNNEL_UP=`egrep -c "Interface oaitun_uem1 successfully configured" $UE_LOG` NB_UE_MBMS_PUSH_MSG=`egrep -c "TRIED TO PUSH MBMS DATA TO" $UE_LOG` #if [ $NB_ENB_GOT_SYNC -gt 0 ] && [ $NB_UE_GOT_SYNC -gt 0 ] && [ $NB_ENB_SYNCED_WITH_UE -gt 0 ] && [ $NB_UE_MBMS_PUSH_MSG -gt 0 ] if [ $NB_UE_MBMS_PUSH_MSG -gt 0 ] then echo " " >> ./test_simulator_results.html else echo " " >> ./test_simulator_results.html fi echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html fi #PING_LOGS=`ls $ARCHIVES_LOC/${TMODE}_${BW}MHz_${CN_CONFIG}_ping*.log 2> /dev/null` #analyzePingFiles #IPERF_TESTS=`ls $ARCHIVES_LOC/${TMODE}_${BW}MHz_${CN_CONFIG}_iperf_dl*client*txt | grep -v mbms 2> /dev/null` #analyzeIperfFiles #IPERF_TESTS=`ls $ARCHIVES_LOC/${TMODE}_${BW}MHz_${CN_CONFIG}_iperf_ul*client*txt | grep -v mbms 2> /dev/null` #analyzeIperfFiles done echo "
Log File NameCommandStatusStatistics
Test with EPC (aka withS1): ${TMODE} -- ${BW}MHz Test without EPC (aka noS1): ${TMODE} -- ${BW}MHz
$NAME_ENB --- $NAME_UEN/AOKKO
" >> ./test_simulator_results.html
                    if [ $NB_ENB_GOT_SYNC -gt 0 ]
                    then
                        echo "- eNB --> got sync" >> ./test_simulator_results.html
                    else
                        echo "- eNB NEVER got sync" >> ./test_simulator_results.html
                    fi
                    if [[ $CN_CONFIG =~ .*noS1.* ]]
                    then
                        if [ $NB_ENB_TUNNEL_UP -gt 0 ]
                        then
                            echo "- eNB mounted oaitun_enb1 interface" >> ./test_simulator_results.html
                        else
                            echo "- eNB NEVER mounted oaitun_enb1 interface" >> ./test_simulator_results.html
                        fi
                    fi
                    if [ $NB_UE_GOT_SYNC -gt 0 ]
                    then
                        echo "- LTE UE --> got sync" >> ./test_simulator_results.html
                    else
                        echo "- LTE UE NEVER got sync" >> ./test_simulator_results.html
                    fi
                    if [ $NB_ENB_SYNCED_WITH_UE -gt 0 ]
                    then
                        echo "- LTE UE attached to eNB" >> ./test_simulator_results.html
                    else
                        echo "- LTE UE NEVER attached to eNB" >> ./test_simulator_results.html
                    fi
                    if [ $NB_UE_TUNNEL_UP -gt 0 ]
                    then
                        echo "- LTE UE mounted oaitun_ue1 interface" >> ./test_simulator_results.html
                    else
                        echo "- LTE UE NEVER mounted oaitun_ue1 interface" >> ./test_simulator_results.html
                    fi
                    echo "
Test MBMS without EPC (aka noS1): ${TMODE} -- ${BW}MHz
$NAME_ENB --- $NAME_UEN/AOKKO
" >> ./test_simulator_results.html
                if [ $NB_ENB_GOT_SYNC -gt 0 ]
                then
                    echo "- eNB --> got sync" >> ./test_simulator_results.html
                else
                    echo "- eNB NEVER got sync" >> ./test_simulator_results.html
                fi
                if [ $NB_ENB_TUNNEL_UP -gt 0 ]
                then
                    echo "- eNB mounted oaitun_enb1 interface" >> ./test_simulator_results.html
                else
                    echo "- eNB NEVER mounted oaitun_enb1 interface" >> ./test_simulator_results.html
                fi
                if [ $NB_ENB_MTUNNEL_UP -gt 0 ]
                then
                    echo "- eNB mounted oaitun_enm1 interface" >> ./test_simulator_results.html
                else
                    echo "- eNB NEVER mounted oaitun_enm1 interface" >> ./test_simulator_results.html
                fi
                if [ $NB_UE_GOT_SYNC -gt 0 ]
                then
                    echo "- LTE UE --> got sync" >> ./test_simulator_results.html
                else
                    echo "- LTE UE NEVER got sync" >> ./test_simulator_results.html
                fi
                if [ $NB_ENB_SYNCED_WITH_UE -gt 0 ]
                then
                    echo "- LTE UE attached to eNB" >> ./test_simulator_results.html
                else
                    echo "- LTE UE NEVER attached to eNB" >> ./test_simulator_results.html
                fi
                if [ $NB_UE_TUNNEL_UP -gt 0 ]
                then
                    echo "- LTE UE mounted oaitun_ue1 interface" >> ./test_simulator_results.html
                else
                    echo "- LTE UE NEVER mounted oaitun_ue1 interface" >> ./test_simulator_results.html
                fi
                if [ $NB_UE_MTUNNEL_UP -gt 0 ]
                then
                    echo "- LTE UE mounted oaitun_uem1 interface" >> ./test_simulator_results.html
                else
                    echo "- LTE UE NEVER mounted oaitun_uem1 interface" >> ./test_simulator_results.html
                fi
                if [ $NB_UE_MBMS_PUSH_MSG -gt 0 ]
                then
                    echo "- LTE UE tried to push ${NB_UE_MBMS_PUSH_MSG} MBMS DATA" >> ./test_simulator_results.html
                else
                    echo "- LTE UE NEVER pushed MBMS DATA" >> ./test_simulator_results.html
                fi
                echo "
Test FeMBMS without EPC (aka noS1): ${TMODE} -- ${BW}MHz
$NAME_ENB --- $NAME_UEN/AOKKO
" >> ./test_simulator_results.html
                #if [ $NB_ENB_GOT_SYNC -gt 0 ]
                #then
                #    echo "- eNB --> got sync" >> ./test_simulator_results.html
                #else
                #    echo "- eNB NEVER got sync" >> ./test_simulator_results.html
                #fi
                if [ $NB_ENB_TUNNEL_UP -gt 0 ]
                then
                    echo "- eNB mounted oaitun_enb1 interface" >> ./test_simulator_results.html
                else
                    echo "- eNB NEVER mounted oaitun_enb1 interface" >> ./test_simulator_results.html
                fi
                if [ $NB_ENB_MTUNNEL_UP -gt 0 ]
                then
                    echo "- eNB mounted oaitun_enm1 interface" >> ./test_simulator_results.html
                else
                    echo "- eNB NEVER mounted oaitun_enm1 interface" >> ./test_simulator_results.html
                fi
                #if [ $NB_UE_GOT_SYNC -gt 0 ]
                #then
                #    echo "- LTE UE --> got sync" >> ./test_simulator_results.html
                #else
                #    echo "- LTE UE NEVER got sync" >> ./test_simulator_results.html
                #fi
                #if [ $NB_ENB_SYNCED_WITH_UE -gt 0 ]
                #then
                #    echo "- LTE UE attached to eNB" >> ./test_simulator_results.html
                #else
                #    echo "- LTE UE NEVER attached to eNB" >> ./test_simulator_results.html
                #fi
                if [ $NB_UE_TUNNEL_UP -gt 0 ]
                then
                    echo "- LTE UE mounted oaitun_ue1 interface" >> ./test_simulator_results.html
                else
                    echo "- LTE UE NEVER mounted oaitun_ue1 interface" >> ./test_simulator_results.html
                fi
                if [ $NB_UE_MTUNNEL_UP -gt 0 ]
                then
                    echo "- LTE UE mounted oaitun_uem1 interface" >> ./test_simulator_results.html
                else
                    echo "- LTE UE NEVER mounted oaitun_uem1 interface" >> ./test_simulator_results.html
                fi
                if [ $NB_UE_MBMS_PUSH_MSG -gt 0 ]
                then
                    echo "- LTE UE tried to push ${NB_UE_MBMS_PUSH_MSG} MBMS DATA" >> ./test_simulator_results.html
                else
                    echo "- LTE UE NEVER pushed MBMS DATA" >> ./test_simulator_results.html
                fi
                echo "
" >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html echo "

5G NR RF Simulator Check

" >> ./test_simulator_results.html if [ -f $ARCHIVES_LOC/test_final_status.log ] then if [ `egrep -c "5G-NR: TEST_OK" $ARCHIVES_LOC/test_final_status.log` -eq 1 ] then echo "
" >> ./test_simulator_results.html echo " TEST was SUCCESSFUL " >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html else echo "
" >> ./test_simulator_results.html echo " TEST was a FAILURE! " >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html fi else echo "
" >> ./test_simulator_results.html echo " COULD NOT DETERMINE TEST FINAL STATUS! " >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html fi echo " " >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html EPC_CONFIGS=("noS1") TRANS_MODES=("tdd") BW_CASES=(106) for CN_CONFIG in ${EPC_CONFIGS[@]} do for TMODE in ${TRANS_MODES[@]} do for BW in ${BW_CASES[@]} do echo " " >> ./test_simulator_results.html if [[ $CN_CONFIG =~ .*wS1.* ]] then echo " " >> ./test_simulator_results.html else echo " " >> ./test_simulator_results.html fi echo " " >> ./test_simulator_results.html ENB_LOG=$ARCHIVES_LOC/${TMODE}_${BW}prb_${CN_CONFIG}_gnb.log UE_LOG=`echo $ENB_LOG | sed -e "s#gnb#ue#"` if [ -f $ENB_LOG ] && [ -f $UE_LOG ] then NAME_ENB=`echo $ENB_LOG | sed -e "s#$ARCHIVES_LOC/##"` NAME_UE=`echo $UE_LOG | sed -e "s#$ARCHIVES_LOC/##"` echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html NB_ENB_GOT_SYNC=`egrep -c "got sync" $ENB_LOG` NB_ENB_TUNNEL_UP=`egrep -c "Interface oaitun_enb1 successfully configured" $ENB_LOG` NB_UE_GOT_SYNC=`egrep -c "rfsimulator: Success" $UE_LOG` NB_ENB_SYNCED_WITH_UE=`egrep -c "Initial sync: starting PBCH detection" $UE_LOG` NB_UE_TUNNEL_UP=`egrep -c "Interface oaitun_ue1 successfully configured" $UE_LOG` if [ $NB_ENB_GOT_SYNC -gt 0 ] && [ $NB_UE_GOT_SYNC -gt 0 ] && [ $NB_ENB_SYNCED_WITH_UE -gt 0 ] then echo " " >> ./test_simulator_results.html else echo " " >> ./test_simulator_results.html fi echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html fi PING_LOGS=`ls $ARCHIVES_LOC/${TMODE}_${BW}prb_${CN_CONFIG}_ping*.log 2> /dev/null` analyzePingFiles IPERF_TESTS=`ls $ARCHIVES_LOC/${TMODE}_${BW}prb_${CN_CONFIG}_iperf_dl*client*txt 2> /dev/null` analyzeIperfFiles IPERF_TESTS=`ls $ARCHIVES_LOC/${TMODE}_${BW}prb_${CN_CONFIG}_iperf_ul*client*txt 2> /dev/null` analyzeIperfFiles done done done echo "
Log File NameCommandStatusStatistics
Test with EPC (aka withS1): ${TMODE} -- ${BW}PRB Test without EPC (aka noS1): ${TMODE} -- ${BW}PRB
$NAME_ENB --- $NAME_UEN/AOKKO
" >> ./test_simulator_results.html
                    if [ $NB_ENB_GOT_SYNC -gt 0 ]
                    then
                        echo "- gNB --> got sync" >> ./test_simulator_results.html
                    else
                        echo "- gNB NEVER got sync" >> ./test_simulator_results.html
                    fi
                    if [ $NB_ENB_TUNNEL_UP -gt 0 ]
                    then
                        echo "- gNB mounted oaitun_enb1 interface" >> ./test_simulator_results.html
                    else
                        echo "- gNB NEVER mounted oaitun_enb1 interface" >> ./test_simulator_results.html
                    fi
                    if [ $NB_UE_GOT_SYNC -gt 0 ]
                    then
                        echo "- NR UE --> got sync" >> ./test_simulator_results.html
                    else
                        echo "- NR UE NEVER got sync" >> ./test_simulator_results.html
                    fi
                    if [ $NB_ENB_SYNCED_WITH_UE -gt 0 ]
                    then
                        echo "- NR UE attached to gNB" >> ./test_simulator_results.html
                    else
                        echo "- NR UE NEVER attached to eNB" >> ./test_simulator_results.html
                    fi
                    if [ $NB_UE_TUNNEL_UP -gt 0 ]
                    then
                        echo "- NR UE mounted oaitun_ue1 interface" >> ./test_simulator_results.html
                    else
                        echo "- NR UE NEVER mounted oaitun_ue1 interface" >> ./test_simulator_results.html
                    fi
                    echo "
" >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html fi ARCHIVES_LOC=archives/l2_sim/test if [ -d $ARCHIVES_LOC ] then echo "

4G LTE L2-NFAPI Simulator Check

" >> ./test_simulator_results.html if [ -f $ARCHIVES_LOC/test_final_status.log ] then if [ `grep -c TEST_OK $ARCHIVES_LOC/test_final_status.log` -eq 1 ] then echo "
" >> ./test_simulator_results.html echo " TEST was SUCCESSFUL " >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html else echo "
" >> ./test_simulator_results.html echo " TEST was a FAILURE! " >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html fi else echo "
" >> ./test_simulator_results.html echo " COULD NOT DETERMINE TEST FINAL STATUS! " >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html fi echo " " >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html EPC_CONFIGS=("wS1" "noS1") TRANS_MODES=("fdd") BW_CASES=(05) NB_USERS=(01 04) for CN_CONFIG in ${EPC_CONFIGS[@]} do for TMODE in ${TRANS_MODES[@]} do for BW in ${BW_CASES[@]} do for UES in ${NB_USERS[@]} do echo " " >> ./test_simulator_results.html if [[ $CN_CONFIG =~ .*wS1.* ]] then echo " " >> ./test_simulator_results.html else echo " " >> ./test_simulator_results.html fi echo " " >> ./test_simulator_results.html ENB_LOG=$ARCHIVES_LOC/${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_enb.log UE_LOG=`echo $ENB_LOG | sed -e "s#enb#ue#"` if [ -f $ENB_LOG ] && [ -f $UE_LOG ] then NAME_ENB=`echo $ENB_LOG | sed -e "s#$ARCHIVES_LOC/##"` NAME_UE=`echo $UE_LOG | sed -e "s#$ARCHIVES_LOC/##"` echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html NB_ENB_GOT_SYNC=`egrep -c "got sync" $ENB_LOG` NB_UE_GOT_SYNC=`egrep -c "got sync" $UE_LOG` NB_ENB_SYNCED_WITH_UE=`egrep -c "Sending NFAPI_START_RESPONSE" $UE_LOG` if [ $NB_ENB_GOT_SYNC -gt 0 ] && [ $NB_UE_GOT_SYNC -gt 2 ] && [ $NB_ENB_SYNCED_WITH_UE -gt 0 ] then echo " " >> ./test_simulator_results.html else echo " " >> ./test_simulator_results.html fi echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html fi PING_LOGS=`ls $ARCHIVES_LOC/${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping*.log 2> /dev/null` analyzePingFiles IPERF_TESTS=`ls $ARCHIVES_LOC/${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_iperf_dl*client*txt 2> /dev/null` analyzeIperfFiles IPERF_TESTS=`ls $ARCHIVES_LOC/${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_iperf_ul*client*txt 2> /dev/null` analyzeIperfFiles done done done done echo "
Log File NameCommandStatusStatistics
Test with EPC (aka withS1): ${TMODE} -- ${BW}MHz -- ${UES} user(s)Test without EPC (aka noS1): ${TMODE} -- ${BW}MHz -- ${UES} user(s)
$NAME_ENB --- $NAME_UEN/AOKKO
" >> ./test_simulator_results.html
                    if [ $NB_ENB_GOT_SYNC -gt 0 ]
                    then
                        echo "- eNB --> got sync" >> ./test_simulator_results.html
                    else
                        echo "- eNB NEVER got sync" >> ./test_simulator_results.html
                    fi
                    if [ $NB_UE_GOT_SYNC -gt 2 ]
                    then
                        echo "- UE --> got sync" >> ./test_simulator_results.html
                    else
                        echo "- UE NEVER got sync" >> ./test_simulator_results.html
                    fi
                    if [ $NB_ENB_SYNCED_WITH_UE -gt 0 ]
                    then
                        echo "- UE attached to eNB" >> ./test_simulator_results.html
                    else
                        echo "- UE NEVER attached to eNB" >> ./test_simulator_results.html
                    fi
                    echo "
" >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html fi ARCHIVES_LOC=archives/phy_sim/test if [ -d $ARCHIVES_LOC ] then echo "

Physical Simulators Check

" >> ./test_simulator_results.html if [ -f $ARCHIVES_LOC/test_final_status.log ] then if [ `grep -c TEST_OK $ARCHIVES_LOC/test_final_status.log` -eq 1 ] then echo "
" >> ./test_simulator_results.html echo " TEST was SUCCESSFUL " >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html else echo "
" >> ./test_simulator_results.html echo " TEST was a FAILURE! " >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html fi else echo "
" >> ./test_simulator_results.html echo " COULD NOT DETERMINE TEST FINAL STATUS! " >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html fi echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html XML_TESTS=`ls $ARCHIVES_LOC/*xml` for XML_FILE in $XML_TESTS do echo " " >> ./test_simulator_results.html NAME=`echo $XML_FILE | sed -e "s#$ARCHIVES_LOC/##"` NB_TESTS=`egrep "testsuite errors" $XML_FILE | sed -e "s#^.*tests='##" -e "s#' *time=.*##"` NB_ERRORS=`egrep "testsuite errors" $XML_FILE | sed -e "s#^.*errors='##" -e "s#' *failures=.*##"` NB_FAILURES=`egrep "testsuite errors" $XML_FILE | sed -e "s#^.*failures='##" -e "s#' *hostname=.*##"` NB_SKIPPED=`egrep "testsuite errors" $XML_FILE | sed -e "s#^.*skipped='##" -e "s#' *tests=.*##"` if [ $NB_ERRORS -eq 0 ] && [ $NB_FAILURES -eq 0 ] then echo " " >> ./test_simulator_results.html else echo " " >> ./test_simulator_results.html fi echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html done echo "
Log File NameNb TestsNb ErrorsNb FailuresNb Failures
$NAME$NAME$NB_TESTS$NB_ERRORS$NB_FAILURES$NB_SKIPPED
" >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html echo "

Details

" >> ./test_simulator_results.html for XML_FILE in $XML_TESTS do echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html PREV_SECTION=0 PREV_TIME_IN_SECS=0 TESTCASES_LIST=`sed -e "s# #@#g" $XML_FILE | grep testcase` for TESTCASE in $TESTCASES_LIST do NAME=`echo $TESTCASE | sed -e "s#^.*name='##" -e "s#'@description=.*##" | sed -e "s#@# #g"` SECTION=`echo $NAME | sed -e "s#\..*##"` if [ $SECTION != $PREV_SECTION ] then echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html PREV_SECTION=$SECTION PREV_TIME_IN_SECS=0 fi DESC=`echo $TESTCASE | sed -e "s#^.*description='##" -e "s#'@Run_result=.*##" | sed -e "s#@# #g"` RESULT=`echo $TESTCASE | sed -e "s#^.*RESULT='##" -e "s#'.*##" | sed -e "s#@# #g"` TIME_IN_SECS=`echo $TESTCASE | sed -e "s#^.*time='##" -e "s#'@RESULT=.*##" | sed -e "s#@# #g" -e "s# s.*##"` TIME=`echo "$TIME_IN_SECS - $PREV_TIME_IN_SECS" | bc -l | awk '{printf "%.2f s", $0}'` PREV_TIME_IN_SECS=$TIME_IN_SECS echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html if [[ $RESULT =~ .*PASS.* ]] then echo " " >> ./test_simulator_results.html else SPLITTED_LINE=`echo -e $TESTCASE | sed -e "s#@#\n#g"` NB_RUNS=`echo -e "${SPLITTED_LINE}" | grep -v Run_result | egrep -c "Run_"` NB_FAILS=`echo -e "${SPLITTED_LINE}" | grep -v Run_result | egrep -c "=FAIL"` echo " " >> ./test_simulator_results.html fi echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html done echo "
Test NameDescriptionResultTime
\"$SECTION\" series
$NAME$DESC$RESULT${RESULT} (${NB_FAILS}/${NB_RUNS})$TIME
" >> ./test_simulator_results.html done fi echo "
" >> ./test_simulator_results.html echo "

" >> ./test_simulator_results.html echo "
End of Test Report -- Copyright 2018 OpenAirInterface. All Rights Reserved.
" >> ./test_simulator_results.html echo "
" >> ./test_simulator_results.html echo "" >> ./test_simulator_results.html }