/* * Copyright (c) 2015, EURECOM (www.eurecom.fr) * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * The views and conclusions contained in the software and documentation are those * of the authors and should not be interpreted as representing official policies, * either expressed or implied, of the FreeBSD Project. */ #ifndef MME_DEFAULT_VALUES_H_ #define MME_DEFAULT_VALUES_H_ /******************************************************************************* * Timer Constants ******************************************************************************/ #define MME_STATISTIC_TIMER_S (60) /******************************************************************************* * GTPV1 User Plane Constants ******************************************************************************/ #define GTPV1_U_PORT_NUMBER (2152) /******************************************************************************* * S1AP Constants ******************************************************************************/ #define S1AP_PORT_NUMBER (36412) ///< S1AP SCTP IANA ASSIGNED Port Number #define S1AP_SCTP_PPID (18) ///< S1AP SCTP Payload Protocol Identifier (PPID) #define S1AP_OUTCOME_TIMER_DEFAULT (5) ///< S1AP Outcome drop timer (s) /******************************************************************************* * S6A Constants ******************************************************************************/ #define S6A_CONF_FILE "../S6A/freediameter/s6a.conf" /******************************************************************************* * SCTP Constants ******************************************************************************/ #define SCTP_RECV_BUFFER_SIZE (1 << 16) #define SCTP_OUT_STREAMS (32) #define SCTP_IN_STREAMS (32) #define SCTP_MAX_ATTEMPTS (5) /******************************************************************************* * MME global definitions ******************************************************************************/ #define MAX_NUMBER_OF_ENB (2) #define MAX_NUMBER_OF_UE (64) #define MMEC (0) #define MMEGID (0) #define PLMN_MCC (208) #define PLMN_MNC (34) #define PLMN_MNC_LEN (2) #define PLMN_TAC (0) #define RELATIVE_CAPACITY (15) /******************************************************************************* * IPv4 Constants ******************************************************************************/ /* Default network card to use for IPV4 packets forwarding. * up stands for user-plane. * cp stands for control-plane * * +-----------+ +------+ +-----------+ * | eNB +------+ | ovs | VLAN 1+------+ MME | * | |cpenb0+------------------+cpmme0| | * | +------+ |bridge| +------+ | * | |upenb0+-------+ | | | * +-----------+------+ | | | +-+------+--+ * +---|--+ |s11mme| * | +---+--+ * | VLAN3 | (optional) * | +---+--+ * | |s11sgw| * | +-+------+--+ * | | S+P-GW | * | VLAN2 +------+ +--------+ * +----------+upsgw0| |pgwsgi0 + * +------+ +--------+ * | | * +-----------+ */ #define DEFAULT_SGW_INTERFACE_NAME_FOR_S11 ("s11sgw") #define DEFAULT_SGW_IP_ADDRESS_FOR_S11 ("192.168.10.1") #define DEFAULT_SGW_IP_NETMASK_FOR_S11 24 #define DEFAULT_SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP ("upsgw0") #define DEFAULT_SGW_IP_ADDRESS_FOR_S1U_S12_S4_UP ("192.168.1.1") #define DEFAULT_SGW_IP_NETMASK_FOR_S1U_S12_S4_UP 24 #define DEFAULT_SGW_INTERFACE_NAME_FOR_S5_S8_UP ("upsgw1") #define DEFAULT_SGW_IP_ADDRESS_FOR_S5_S8_UP ("192.168.5.2") #define DEFAULT_SGW_IP_NETMASK_FOR_S5_S8_UP 24 #define DEFAULT_PGW_INTERFACE_NAME_FOR_S5_S8 ("uppgw0") #define DEFAULT_PGW_IP_ADDRESS_FOR_S5_S8 ("192.168.5.1") #define DEFAULT_PGW_IP_NETMASK_FOR_S5_S8 24 #define DEFAULT_PGW_INTERFACE_NAME_FOR_SGI ("eth0") #define DEFAULT_PGW_IP_ADDR_FOR_SGI ("192.168.14.17") #define DEFAULT_PGW_IP_NETMASK_FOR_SGI 24 #define DEFAULT_MME_INTERFACE_NAME_FOR_S11 ("s11mme") ///< MME control plane interface #define DEFAULT_MME_IP_ADDRESS_FOR_S11 ("192.168.10.2") ///< MME control plane IP address #define DEFAULT_MME_IP_NETMASK_FOR_S11 24; #define DEFAULT_MME_INTERFACE_NAME_FOR_S1_MME ("cpmme0") ///< MME control plane interface #define DEFAULT_MME_IP_ADDRESS_FOR_S1_MME ("192.168.11.1") ///< MME control plane IP address #define DEFAULT_MME_IP_NETMASK_FOR_S1_MME 24; #endif /* MME_DEFAULT_VALUES_H_ */