Robert Schmidt
41d14b571c
Since the parent commit, the ra_ResponseWindow will be chosen automatically. Correspondingly, remove most ra_ResponseWindow options from configuration files in the repository. One problem in some mu=1 configs is that the ra_ResponseWindow=4 (10 slots), which might be overly restrictive if the L1 slot ahead is somewhat close to 10 (e.g., 6), in which case we might not be always able to allocate Msg2 in time. A notable exception here is gnb-vnf.sa.band66.u0.25prb.nfapi.conf, in which we still provide it (1) since it uses a non-standard configuration of a ra_ResponseWindow longer than 10ms (see also issue #916 for more information) and (2) as an example.
232 lines
8.7 KiB
Plaintext
232 lines
8.7 KiB
Plaintext
Active_gNBs = ( "gNB-Eurecom-5GNRBox");
|
|
# Asn1_verbosity, choice in: none, info, annoying
|
|
Asn1_verbosity = "none";
|
|
|
|
gNBs =
|
|
(
|
|
{
|
|
////////// Identification parameters:
|
|
gNB_ID = 0xe00;
|
|
|
|
cell_type = "CELL_MACRO_GNB";
|
|
|
|
gNB_name = "gNB-Eurecom-5GNRBox";
|
|
|
|
// Tracking area code, 0x0000 and 0xfffe are reserved values
|
|
tracking_area_code = 5;
|
|
|
|
plmn_list = ({mcc = 320; mnc = 230; mnc_length = 3;});
|
|
|
|
tr_s_preference = "local_mac"
|
|
|
|
////////// Physical parameters:
|
|
|
|
min_rxtxtime = 6;
|
|
|
|
servingCellConfigCommon = (
|
|
{
|
|
#spCellConfigCommon
|
|
|
|
physCellId = 0;
|
|
|
|
# downlinkConfigCommon
|
|
#frequencyInfoDL
|
|
# this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
|
|
absoluteFrequencySSB = 641032;
|
|
dl_frequencyBand = 78;
|
|
# this is 3600 MHz
|
|
dl_absoluteFrequencyPointA = 640000;
|
|
#scs-SpecificCarrierList
|
|
dl_offstToCarrier = 0;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
dl_subcarrierSpacing = 1;
|
|
dl_carrierBandwidth = 106;
|
|
#initialDownlinkBWP
|
|
#genericParameters
|
|
# this is RBstart=41,L=24 (275*(L-1))+RBstart
|
|
initialDLBWPlocationAndBandwidth = 6366;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
initialDLBWPsubcarrierSpacing = 1;
|
|
#pdcch-ConfigCommon
|
|
initialDLBWPcontrolResourceSetZero = 12;
|
|
initialDLBWPsearchSpaceZero = 0;
|
|
|
|
#uplinkConfigCommon
|
|
#frequencyInfoUL
|
|
ul_frequencyBand = 78;
|
|
#scs-SpecificCarrierList
|
|
ul_offstToCarrier = 0;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
ul_subcarrierSpacing = 1;
|
|
ul_carrierBandwidth = 106;
|
|
pMax = 20;
|
|
#initialUplinkBWP
|
|
#genericParameters
|
|
initialULBWPlocationAndBandwidth = 6366;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
initialULBWPsubcarrierSpacing = 1;
|
|
#rach-ConfigCommon
|
|
#rach-ConfigGeneric
|
|
prach_ConfigurationIndex = 98;
|
|
#prach_msg1_FDM
|
|
#0 = one, 1=two, 2=four, 3=eight
|
|
prach_msg1_FDM = 0;
|
|
prach_msg1_FrequencyStart = 0;
|
|
zeroCorrelationZoneConfig = 13;
|
|
preambleReceivedTargetPower = -118;
|
|
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
|
|
preambleTransMax = 6;
|
|
#powerRampingStep
|
|
# 0=dB0,1=dB2,2=dB4,3=dB6
|
|
powerRampingStep = 1;
|
|
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
|
|
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
|
|
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
|
|
#oneHalf (0..15) 4,8,12,16,...60,64
|
|
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
|
|
#ra_ContentionResolutionTimer
|
|
#(0..7) 8,16,24,32,40,48,56,64
|
|
ra_ContentionResolutionTimer = 7;
|
|
rsrp_ThresholdSSB = 19;
|
|
#prach-RootSequenceIndex_PR
|
|
#1 = 839, 2 = 139
|
|
prach_RootSequenceIndex_PR = 2;
|
|
prach_RootSequenceIndex = 1;
|
|
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
|
|
#
|
|
msg1_SubcarrierSpacing = 1,
|
|
# restrictedSetConfig
|
|
# 0=unrestricted, 1=restricted type A, 2=restricted type B
|
|
restrictedSetConfig = 0,
|
|
|
|
msg3_DeltaPreamble = 1;
|
|
p0_NominalWithGrant =-90;
|
|
|
|
# pucch-ConfigCommon setup :
|
|
# pucchGroupHopping
|
|
# 0 = neither, 1= group hopping, 2=sequence hopping
|
|
pucchGroupHopping = 0;
|
|
hoppingId = 40;
|
|
p0_nominal = -90;
|
|
|
|
ssb_PositionsInBurst_Bitmap = 1;
|
|
|
|
# ssb_periodicityServingCell
|
|
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
|
|
ssb_periodicityServingCell = 2;
|
|
|
|
# dmrs_TypeA_position
|
|
# 0 = pos2, 1 = pos3
|
|
dmrs_TypeA_Position = 0;
|
|
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
subcarrierSpacing = 1;
|
|
|
|
|
|
#tdd-UL-DL-ConfigurationCommon
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
referenceSubcarrierSpacing = 1;
|
|
# pattern1
|
|
# dl_UL_TransmissionPeriodicity
|
|
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
|
|
dl_UL_TransmissionPeriodicity = 6;
|
|
nrofDownlinkSlots = 7;
|
|
nrofDownlinkSymbols = 6;
|
|
nrofUplinkSlots = 2;
|
|
nrofUplinkSymbols = 4;
|
|
|
|
ssPBCH_BlockPower = 10;
|
|
}
|
|
|
|
|
|
);
|
|
|
|
|
|
|
|
srb1_parameters :
|
|
{
|
|
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
|
|
timer_poll_retransmit = 80;
|
|
|
|
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
|
|
timer_reordering = 35;
|
|
|
|
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
|
|
timer_status_prohibit = 0;
|
|
|
|
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
|
|
poll_pdu = 4;
|
|
|
|
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
|
|
poll_byte = 99999;
|
|
|
|
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
|
|
max_retx_threshold = 4;
|
|
}
|
|
|
|
# ------- SCTP definitions
|
|
SCTP :
|
|
{
|
|
# Number of streams to use in input/output
|
|
SCTP_INSTREAMS = 2;
|
|
SCTP_OUTSTREAMS = 2;
|
|
};
|
|
|
|
|
|
////////// MME parameters:
|
|
mme_ip_address = ({ ipv4 = "192.168.61.3"; });
|
|
|
|
///X2
|
|
enable_x2 = "yes";
|
|
t_reloc_prep = 1000; /* unit: millisecond */
|
|
tx2_reloc_overall = 2000; /* unit: millisecond */
|
|
t_dc_prep = 1000; /* unit: millisecond */
|
|
t_dc_overall = 2000; /* unit: millisecond */
|
|
target_enb_x2_ip_address = ({ ipv4 = "127.0.0.1"; });
|
|
|
|
NETWORK_INTERFACES :
|
|
{ # All of these have to be IP addr of gNB
|
|
# if in CORE container, make it 172.16.0.X
|
|
# if not launched in CORE, can set to lo (127.0.0.2)
|
|
GNB_IPV4_ADDRESS_FOR_S1_MME = "127.0.0.2";
|
|
GNB_IPV4_ADDRESS_FOR_S1U = "127.0.0.2";
|
|
GNB_PORT_FOR_S1U = 2152; # Spec 2152
|
|
GNB_IPV4_ADDRESS_FOR_X2C = "127.0.0.2";
|
|
GNB_PORT_FOR_X2C = 36422; # Spec 36422
|
|
};
|
|
}
|
|
);
|
|
|
|
|
|
MACRLCs = (
|
|
{
|
|
num_cc = 1;
|
|
remote_s_address = "127.0.0.1"; // pnf addr [!]
|
|
local_s_address = "127.0.0.2"; // vnf addr
|
|
local_s_portc = 50601; // vnf p5 port
|
|
remote_s_portc = 50600; // pnf p5 port [!]
|
|
local_s_portd = 50611; // vnf p7 port [!]
|
|
remote_s_portd = 50610; // pnf p7 port [!]
|
|
tr_s_preference = "nfapi";
|
|
tr_n_preference = "local_RRC";
|
|
}
|
|
)
|
|
|
|
log_config =
|
|
{
|
|
global_log_level ="info";
|
|
hw_log_level ="info";
|
|
phy_log_level ="info";
|
|
mac_log_level ="info";
|
|
rlc_log_level ="info";
|
|
pdcp_log_level ="info";
|
|
rrc_log_level ="info";
|
|
};
|
|
|