Files
Robert Schmidt ddf549b1f3 Move radio CMakeLists.txt to subdirectory
- move following radios: AW2S, BladeRF, IRIS, LMSSDR, RFsimulator, USRP
- move following transports: Ethernet, benetel4g, benetel5g
- for each: create independent cmake variable to switch compilation
  on/off, in order: OAI_AW2S, OAI_BLADERF, OAI_IRIS, OAI_LMSSDR,
  OAI_SIMU, OAI_USRP, OAI_ETHERNET, OAI_BENETEL4G, OAI_BENETEL5G
- Remove RF_BOARD variable, allows to compile multiple boards at once
- where applicable: remove USERSPACE/LIB in path, i.e., move files up to
  directories, as all are userspace libraries

Note that with the above, it is now mandatory to enable a radio
implementation before compiling it, e.g., for USRP:

./build_oai -w USRP
cmake .. -DOAI_USRP=ON && ninja oai_usrpdevif
2023-07-07 08:35:28 +02:00

89 lines
3.9 KiB
C

/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
/*! \file radio/ETHERNET/if_defs.h
* \brief
* \author S. Sandeep Kumar, Raymond Knopp
* \date 2016
* \version 0.1
* \company Eurecom
* \email: ee13b1025@iith.ac.in, knopp@eurecom.fr
* \note
* \warning
*/
#ifndef __ETHERNET_USERSPACE_LIB_IF_DEFS__H__
#define __ETHERNET_USERSPACE_LIB_IF_DEFS__H__
#include <netinet/ether.h>
#include <stdint.h>
#ifndef LITE_COMPILATION
#include "PHY/LTE_TRANSPORT/if4_tools.h"
#endif
// ETH transport preference modes
#define ETH_UDP_MODE 0
#define ETH_RAW_MODE 1
#define ETH_UDP_IF4p5_MODE 2
#define ETH_RAW_IF4p5_MODE 3
#define ETH_UDP_IF5_ECPRI_MODE 4
// COMMOM HEADER LENGTHS
#define NO_COMPRESS 0
#define ALAW_COMPRESS 1
#define UDP_HEADER_SIZE_BYTES 8
#define IPV4_HEADER_SIZE_BYTES 60 // This is the maximum IPv4 header length
// Time domain RRH packet sizes
#define MAC_HEADER_SIZE_BYTES (sizeof(struct ether_header))
#define MAX_PACKET_SEQ_NUM(spp,spf) (spf/spp)
#define PAYLOAD_SIZE_BYTES(nsamps) (nsamps<<2)
#define UDP_PACKET_SIZE_BYTES(nsamps) (APP_HEADER_SIZE_BYTES + PAYLOAD_SIZE_BYTES(nsamps))
#define RAW_PACKET_SIZE_BYTES(nsamps) (APP_HEADER_SIZE_BYTES + MAC_HEADER_SIZE_BYTES + PAYLOAD_SIZE_BYTES(nsamps))
#define PAYLOAD_SIZE_BYTES_ALAW(nsamps) (nsamps<<1)
#define UDP_PACKET_SIZE_BYTES_ALAW(nsamps) (APP_HEADER_SIZE_BYTES + PAYLOAD_SIZE_BYTES_ALAW(nsamps))
#define RAW_PACKET_SIZE_BYTES_ALAW(nsamps) (APP_HEADER_SIZE_BYTES + MAC_HEADER_SIZE_BYTES + PAYLOAD_SIZE_BYTES_ALAW(nsamps))
// Packet sizes for IF4p5 interface format
#define DATA_BLOCK_SIZE_BYTES(scaled_nblocks) (sizeof(uint16_t)*scaled_nblocks)
#define PRACH_NUM_SAMPLES (839*2)
#define PRACH_BLOCK_SIZE_BYTES (sizeof(int16_t)*PRACH_NUM_SAMPLES)
#define RAW_IF4p5_PDLFFT_SIZE_BYTES(nblocks) (MAC_HEADER_SIZE_BYTES + sizeof_IF4p5_header_t + DATA_BLOCK_SIZE_BYTES(nblocks))
#define RAW_IF4p5_PULFFT_SIZE_BYTES(nblocks) (MAC_HEADER_SIZE_BYTES + sizeof_IF4p5_header_t + DATA_BLOCK_SIZE_BYTES(nblocks))
#define RAW_IF4p5_PULTICK_SIZE_BYTES (MAC_HEADER_SIZE_BYTES + sizeof_IF4p5_header_t)
#define RAW_IF4p5_PRACH_SIZE_BYTES (MAC_HEADER_SIZE_BYTES + sizeof_IF4p5_header_t + PRACH_BLOCK_SIZE_BYTES)
#define UDP_IF4p5_PDLFFT_SIZE_BYTES(nblocks) (UDP_HEADER_SIZE_BYTES + IPV4_HEADER_SIZE_BYTES + sizeof_IF4p5_header_t + DATA_BLOCK_SIZE_BYTES(nblocks))
#define UDP_IF4p5_PULFFT_SIZE_BYTES(nblocks) (UDP_HEADER_SIZE_BYTES + IPV4_HEADER_SIZE_BYTES + sizeof_IF4p5_header_t + DATA_BLOCK_SIZE_BYTES(nblocks))
#define UDP_IF4p5_PULTICK_SIZE_BYTES (UDP_HEADER_SIZE_BYTES + IPV4_HEADER_SIZE_BYTES + sizeof_IF4p5_header_t)
#define UDP_IF4p5_PRACH_SIZE_BYTES (UDP_HEADER_SIZE_BYTES + IPV4_HEADER_SIZE_BYTES + sizeof_IF4p5_header_t + PRACH_BLOCK_SIZE_BYTES)
// Mobipass packet sizes
#define RAW_IF5_MOBIPASS_BLOCK_SIZE_BYTES 1280
#define RAW_IF5_MOBIPASS_SIZE_BYTES (MAC_HEADER_SIZE_BYTES + sizeof_IF5_mobipass_header_t + RAW_IF5_MOBIPASS_BLOCK_SIZE_BYTES)
#define PAYLOAD_MOBIPASS_NUM_SAMPLES 640
#endif