Files
Robert Schmidt 8107939f08 Change OAI license to CSSL v1.0 (and others)
- all RAN code, CI code, configuration files, dockerfiles, in CSSL v1.0
- all deployment code (openshift, charts, ancillary files like shell
  scripts), in MIT
- documentation in CC-BY-4.0
- exceptions might apply and are listed in NOTICE
- there is a new LICENSES folder with all licenses
- CONTRIBUTIONS.md has been updated accordingly

For automated changes based on OAI PL v1.1:

    perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.{c,h,cpp}
    perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.ts
    perl -i~ -0pe 's/<!--.*Licensed to the OpenAirInterface.*openairinterface.org\n.*-->/<!-- SPDX-License-Identifier: LicenseRef-CSSL-1.0 -->/s' **/*.xml

The rest (cmake, files with missing license, cmake) manually.
2026-03-27 16:36:37 +01:00

139 lines
2.8 KiB
C

/*
* SPDX-License-Identifier: LicenseRef-CSSL-1.0
*/
#ifndef NFAPI_VNF_H_
#define NFAPI_VNF_H_
#include <common_lib.h>
#include "nfapi_vnf_interface.h"
typedef struct {
uint8_t enabled;
uint32_t rx_port;
uint32_t tx_port;
char tx_addr[80];
} udp_data;
typedef struct {
uint16_t index;
uint16_t id;
uint8_t rfs[2];
uint8_t excluded_rfs[2];
udp_data udp;
char local_addr[80];
int local_port;
char *remote_addr;
int remote_port;
uint8_t duplex_mode;
uint16_t dl_channel_bw_support;
uint16_t ul_channel_bw_support;
uint8_t num_dl_layers_supported;
uint8_t num_ul_layers_supported;
uint16_t release_supported;
uint8_t nmm_modes_supported;
uint8_t dl_ues_per_subframe;
uint8_t ul_ues_per_subframe;
uint8_t first_subframe_ind;
// timing information recevied from the vnf
uint8_t timing_window;
uint8_t timing_info_mode;
uint8_t timing_info_period;
} phy_info;
typedef struct {
uint16_t index;
uint16_t band;
int16_t max_transmit_power;
int16_t min_transmit_power;
uint8_t num_antennas_supported;
uint32_t min_downlink_frequency;
uint32_t max_downlink_frequency;
uint32_t max_uplink_frequency;
uint32_t min_uplink_frequency;
} rf_info;
typedef struct {
int release;
phy_info phys[2];
rf_info rfs[2];
uint8_t sync_mode;
uint8_t location_mode;
uint8_t location_coordinates[6];
uint32_t dl_config_timing;
uint32_t ul_config_timing;
uint32_t tx_timing;
uint32_t hi_dci0_timing;
uint16_t max_phys;
uint16_t max_total_bw;
uint16_t max_total_dl_layers;
uint16_t max_total_ul_layers;
uint8_t shared_bands;
uint8_t shared_pa;
int16_t max_total_power;
uint8_t oui;
uint8_t wireshark_test_mode;
} pnf_info;
typedef struct mac mac_t;
typedef struct mac {
void *user_data;
void (*dl_config_req)(mac_t *mac, nfapi_dl_config_request_t *req);
void (*ul_config_req)(mac_t *mac, nfapi_ul_config_request_t *req);
void (*hi_dci0_req)(mac_t *mac, nfapi_hi_dci0_request_t *req);
void (*tx_req)(mac_t *mac, nfapi_tx_request_t *req);
} mac_t;
typedef struct {
int local_port;
char local_addr[80];
unsigned timing_window;
unsigned periodic_timing_enabled;
unsigned aperiodic_timing_enabled;
unsigned periodic_timing_period;
// This is not really the right place if we have multiple PHY,
// should be part of the phy struct
udp_data udp;
uint8_t thread_started;
nfapi_vnf_p7_config_t *config;
mac_t *mac;
} vnf_p7_info;
typedef struct {
uint8_t wireshark_test_mode;
pnf_info pnfs[2];
vnf_p7_info p7_vnfs[2];
} vnf_info;
void configure_nfapi_vnf(char *vnf_addr, int vnf_p5_port, char *pnf_ip_addr, int pnf_p7_port, int vnf_p7_port);
void configure_nr_nfapi_vnf(eth_params_t params);
void stop_nr_nfapi_vnf();
nfapi_vnf_config_t *get_config();
vnf_p7_t *get_p7_vnf();
nfapi_vnf_p7_config_t *get_p7_vnf_config();
#endif /* NFAPI_VNF_H_ */