Thomas Schlichter
2bb632a7fe
make sure the SSB is offset by 4 PRBs from the BW start. Therefore, the ARFCN for the SSB center must be offset by 14 PRB from the ARFCN for the BW start.
270 lines
9.8 KiB
Plaintext
270 lines
9.8 KiB
Plaintext
Active_gNBs = ( "5G-GOA-gNB");
|
|
# Asn1_verbosity, choice in: none, info, annoying
|
|
Asn1_verbosity = "none";
|
|
|
|
gNBs =
|
|
(
|
|
{
|
|
////////// Identification parameters:
|
|
gNB_ID = 0xe00;
|
|
gNB_name = "5G-GOA-gNB";
|
|
|
|
// Tracking area code, 0x0000 and 0xfffe are reserved values
|
|
tracking_area_code = 1;
|
|
plmn_list = ({ mcc = 208; mnc = 99; mnc_length = 2; snssaiList = ({ sst = 1 }) });
|
|
|
|
nr_cellid = 12345678L;
|
|
|
|
////////// Physical parameters:
|
|
|
|
sib1_tda = 5;
|
|
min_rxtxtime = 6;
|
|
|
|
servingCellConfigCommon = (
|
|
{
|
|
#spCellConfigCommon
|
|
|
|
physCellId = 0;
|
|
|
|
# downlinkConfigCommon
|
|
#frequencyInfoDL
|
|
# this is 2150.43 MHz + 14 PRBs@15kHz SCS (same as initial BWP), points to Subcarrier 0 of RB#10 of SSB block
|
|
absoluteFrequencySSB = 430590;
|
|
dl_frequencyBand = 66;
|
|
# this is 2150.43 MHz
|
|
dl_absoluteFrequencyPointA = 430086;
|
|
#scs-SpecificCarrierList
|
|
dl_offstToCarrier = 0;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
dl_subcarrierSpacing = 0;
|
|
dl_carrierBandwidth = 25;
|
|
#initialDownlinkBWP
|
|
#genericParameters
|
|
# this is RBstart=0,L=25 (275*(L-1))+RBstart
|
|
initialDLBWPlocationAndBandwidth = 6600;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
initialDLBWPsubcarrierSpacing = 0;
|
|
#pdcch-ConfigCommon
|
|
initialDLBWPcontrolResourceSetZero = 2;
|
|
initialDLBWPsearchSpaceZero = 0;
|
|
|
|
#uplinkConfigCommon
|
|
#frequencyInfoUL
|
|
ul_frequencyBand = 66;
|
|
# this is 1750.43 MHz
|
|
ul_absoluteFrequencyPointA = 350086;
|
|
#scs-SpecificCarrierList
|
|
ul_offstToCarrier = 0;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
ul_subcarrierSpacing = 0;
|
|
ul_carrierBandwidth = 25;
|
|
pMax = 20;
|
|
#initialUplinkBWP
|
|
#genericParameters
|
|
initialULBWPlocationAndBandwidth = 6600;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
initialULBWPsubcarrierSpacing = 0;
|
|
#rach-ConfigCommon
|
|
#rach-ConfigGeneric
|
|
prach_ConfigurationIndex = 98;
|
|
#prach_msg1_FDM
|
|
#0 = one, 1=two, 2=four, 3=eight
|
|
prach_msg1_FDM = 0;
|
|
prach_msg1_FrequencyStart = 0;
|
|
zeroCorrelationZoneConfig = 13;
|
|
preambleReceivedTargetPower = -118;
|
|
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
|
|
preambleTransMax = 6;
|
|
#powerRampingStep
|
|
# 0=dB0,1=dB2,2=dB4,3=dB6
|
|
powerRampingStep = 1;
|
|
#ra_ReponseWindow
|
|
#1,2,4,8,10,20,40,80
|
|
ra_ResponseWindow = 4;
|
|
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
|
|
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
|
|
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
|
|
#oneHalf (0..15) 4,8,12,16,...60,64
|
|
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
|
|
#ra_ContentionResolutionTimer
|
|
#(0..7) 8,16,24,32,40,48,56,64
|
|
ra_ContentionResolutionTimer = 7;
|
|
rsrp_ThresholdSSB = 19;
|
|
#prach-RootSequenceIndex_PR
|
|
#1 = 839, 2 = 139
|
|
prach_RootSequenceIndex_PR = 2;
|
|
prach_RootSequenceIndex = 1;
|
|
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
|
|
#
|
|
msg1_SubcarrierSpacing = 0;
|
|
# restrictedSetConfig
|
|
# 0=unrestricted, 1=restricted type A, 2=restricted type B
|
|
restrictedSetConfig = 0;
|
|
|
|
msg3_DeltaPreamble = 1;
|
|
p0_NominalWithGrant =-90;
|
|
|
|
# pucch-ConfigCommon setup :
|
|
# pucchGroupHopping
|
|
# 0 = neither, 1= group hopping, 2=sequence hopping
|
|
pucchGroupHopping = 0;
|
|
hoppingId = 40;
|
|
p0_nominal = -90;
|
|
# ssb_PositionsInBurs_BitmapPR
|
|
# 1=short, 2=medium, 3=long
|
|
ssb_PositionsInBurst_PR = 2;
|
|
ssb_PositionsInBurst_Bitmap = 1;
|
|
|
|
# ssb_periodicityServingCell
|
|
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
|
|
ssb_periodicityServingCell = 2;
|
|
|
|
# dmrs_TypeA_position
|
|
# 0 = pos2, 1 = pos3
|
|
dmrs_TypeA_Position = 0;
|
|
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
subcarrierSpacing = 0;
|
|
|
|
|
|
#tdd-UL-DL-ConfigurationCommon
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
referenceSubcarrierSpacing = 0;
|
|
# pattern1
|
|
# dl_UL_TransmissionPeriodicity
|
|
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
|
|
dl_UL_TransmissionPeriodicity = 6;
|
|
nrofDownlinkSlots = 7;
|
|
nrofDownlinkSymbols = 6;
|
|
nrofUplinkSlots = 2;
|
|
nrofUplinkSymbols = 4;
|
|
|
|
ssPBCH_BlockPower = -25;
|
|
}
|
|
|
|
);
|
|
|
|
|
|
# ------- SCTP definitions
|
|
SCTP :
|
|
{
|
|
# Number of streams to use in input/output
|
|
SCTP_INSTREAMS = 2;
|
|
SCTP_OUTSTREAMS = 2;
|
|
};
|
|
|
|
|
|
////////// AMF parameters:
|
|
amf_ip_address = ({ ipv4 = "192.168.71.132"; });
|
|
|
|
NETWORK_INTERFACES :
|
|
{
|
|
GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.71.140/26";
|
|
GNB_IPV4_ADDRESS_FOR_NGU = "192.168.71.140/26";
|
|
GNB_PORT_FOR_S1U = 2152; # Spec 2152
|
|
};
|
|
|
|
}
|
|
);
|
|
|
|
MACRLCs = (
|
|
{
|
|
num_cc = 1;
|
|
tr_s_preference = "local_L1";
|
|
tr_n_preference = "local_RRC";
|
|
pusch_TargetSNRx10 = 150;
|
|
pucch_TargetSNRx10 = 200;
|
|
}
|
|
);
|
|
|
|
L1s = (
|
|
{
|
|
num_cc = 1;
|
|
tr_n_preference = "local_mac";
|
|
prach_dtx_threshold = 120;
|
|
pucch0_dtx_threshold = 150;
|
|
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
|
|
}
|
|
);
|
|
|
|
RUs = (
|
|
{
|
|
local_rf = "yes";
|
|
nb_tx = 1;
|
|
nb_rx = 1;
|
|
att_tx = 0;
|
|
att_rx = 0;
|
|
bands = [7];
|
|
max_pdschReferenceSignalPower = -27;
|
|
max_rxgain = 114;
|
|
sf_extension = 0;
|
|
eNB_instances = [0];
|
|
##beamforming 1x2 matrix: 1 layer x 2 antennas
|
|
bf_weights = [0x00007fff, 0x0000];
|
|
##beamforming 1x4 matrix: 1 layer x 4 antennas
|
|
#bf_weights = [0x00007fff, 0x0000,0x0000, 0x0000];
|
|
## beamforming 2x2 matrix:
|
|
# bf_weights = [0x00007fff, 0x00000000, 0x00000000, 0x00007fff];
|
|
## beamforming 4x4 matrix:
|
|
#bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
|
|
sdr_addrs = "type=x300";
|
|
clock_src = "internal";
|
|
# if_freq = 3700000000L;
|
|
# if_offset = 1000000;
|
|
}
|
|
);
|
|
|
|
THREAD_STRUCT = (
|
|
{
|
|
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
|
|
parallel_config = "PARALLEL_RU_L1_TRX_SPLIT";
|
|
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
|
|
worker_config = "WORKER_DISABLE";
|
|
}
|
|
);
|
|
|
|
rfsimulator :
|
|
{
|
|
serveraddr = "server";
|
|
serverport = 4043;
|
|
options = (); #("saviq"); or/and "chanmod"
|
|
modelname = "AWGN";
|
|
IQfile = "/tmp/rfsimulator.iqs";
|
|
};
|
|
|
|
security = {
|
|
# preferred ciphering algorithms
|
|
# the first one of the list that an UE supports in chosen
|
|
# valid values: nea0, nea1, nea2, nea3
|
|
ciphering_algorithms = ( "nea0" );
|
|
|
|
# preferred integrity algorithms
|
|
# the first one of the list that an UE supports in chosen
|
|
# valid values: nia0, nia1, nia2, nia3
|
|
integrity_algorithms = ( "nia2", "nia0" );
|
|
|
|
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
|
|
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
|
|
drb_ciphering = "yes";
|
|
drb_integrity = "no";
|
|
};
|
|
|
|
log_config :
|
|
{
|
|
global_log_level ="info";
|
|
hw_log_level ="info";
|
|
phy_log_level ="info";
|
|
mac_log_level ="info";
|
|
rlc_log_level ="info";
|
|
pdcp_log_level ="info";
|
|
rrc_log_level ="info";
|
|
ngap_log_level ="debug";
|
|
f1ap_log_level ="info";
|
|
};
|