Robert Schmidt
41d14b571c
Since the parent commit, the ra_ResponseWindow will be chosen automatically. Correspondingly, remove most ra_ResponseWindow options from configuration files in the repository. One problem in some mu=1 configs is that the ra_ResponseWindow=4 (10 slots), which might be overly restrictive if the L1 slot ahead is somewhat close to 10 (e.g., 6), in which case we might not be always able to allocate Msg2 in time. A notable exception here is gnb-vnf.sa.band66.u0.25prb.nfapi.conf, in which we still provide it (1) since it uses a non-standard configuration of a ra_ResponseWindow longer than 10ms (see also issue #916 for more information) and (2) as an example.
274 lines
9.2 KiB
Plaintext
274 lines
9.2 KiB
Plaintext
Active_gNBs = ( "gNB-OAI");
|
|
# Asn1_verbosity, choice in: none, info, annoying
|
|
Asn1_verbosity = "none";
|
|
|
|
gNBs =
|
|
(
|
|
{
|
|
////////// Identification parameters:
|
|
gNB_ID = 0xe00;
|
|
gNB_name = "gNB-OAI";
|
|
|
|
// Tracking area code, 0x0000 and 0xfffe are reserved values
|
|
tracking_area_code = 1;
|
|
plmn_list = ({ mcc = 208; mnc = 97; mnc_length = 2; snssaiList = ( { sst = 1; }); });
|
|
|
|
nr_cellid = 1;
|
|
|
|
////////// Physical parameters:
|
|
|
|
pdsch_AntennaPorts_XP = 2;
|
|
pdsch_AntennaPorts_N1 = 1;
|
|
maxMIMO_layers = 2;
|
|
pusch_AntennaPorts = 4;
|
|
do_CSIRS = 1;
|
|
do_SRS = 0;
|
|
sib1_tda = 15;
|
|
# force_UL256qam_off = 1;
|
|
|
|
servingCellConfigCommon = (
|
|
{
|
|
#spCellConfigCommon
|
|
|
|
physCellId = 0;
|
|
# n_TimingAdvanceOffset = 0;
|
|
# downlinkConfigCommon
|
|
#frequencyInfoDL
|
|
# center frequency = 3350.01 MHz
|
|
# selected SSB frequency = 3349.92 MHz
|
|
absoluteFrequencySSB = 623328;
|
|
dl_frequencyBand = 78;
|
|
# frequency point A = 3300.87 MHz
|
|
dl_absoluteFrequencyPointA = 620052;
|
|
#scs-SpecificCarrierList
|
|
dl_offstToCarrier = 0;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
dl_subcarrierSpacing = 1;
|
|
dl_carrierBandwidth = 273;
|
|
#initialDownlinkBWP
|
|
#genericParameters
|
|
initialDLBWPlocationAndBandwidth = 1099; #38.101-1 Table 5.3.2-1
|
|
#
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
initialDLBWPsubcarrierSpacing = 1;
|
|
#pdcch-ConfigCommon
|
|
initialDLBWPcontrolResourceSetZero = 11;
|
|
initialDLBWPsearchSpaceZero = 0;
|
|
|
|
#uplinkConfigCommon
|
|
#frequencyInfoUL
|
|
ul_frequencyBand = 78;
|
|
#scs-SpecificCarrierList
|
|
ul_offstToCarrier = 0;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
ul_subcarrierSpacing = 1;
|
|
ul_carrierBandwidth = 273;
|
|
pMax = 23;
|
|
#initialUplinkBWP
|
|
#genericParameters
|
|
initialULBWPlocationAndBandwidth = 1099;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
initialULBWPsubcarrierSpacing = 1;
|
|
#rach-ConfigCommon
|
|
#rach-ConfigGeneric
|
|
prach_ConfigurationIndex = 152;
|
|
#prach_msg1_FDM
|
|
#0 = one, 1=two, 2=four, 3=eight
|
|
prach_msg1_FDM = 0;
|
|
prach_msg1_FrequencyStart = 0;
|
|
zeroCorrelationZoneConfig = 0;
|
|
preambleReceivedTargetPower = -100;
|
|
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
|
|
preambleTransMax = 8;
|
|
#powerRampingStep
|
|
# 0=dB0,1=dB2,2=dB4,3=dB6
|
|
powerRampingStep = 1;
|
|
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
|
|
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
|
|
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
|
|
#one (0..15) 4,8,12,16,...60,64
|
|
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
|
|
#ra_ContentionResolutionTimer
|
|
#(0..7) 8,16,24,32,40,48,56,64
|
|
ra_ContentionResolutionTimer = 7;
|
|
rsrp_ThresholdSSB = 19;
|
|
#prach-RootSequenceIndex_PR
|
|
#1 = 839, 2 = 139
|
|
prach_RootSequenceIndex_PR = 2;
|
|
prach_RootSequenceIndex = 1;
|
|
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
|
|
#
|
|
msg1_SubcarrierSpacing = 1,
|
|
# restrictedSetConfig
|
|
# 0=unrestricted, 1=restricted type A, 2=restricted type B
|
|
restrictedSetConfig = 0,
|
|
|
|
# this is the offset between the last PRACH preamble power and the Msg3 PUSCH, 2 times the field value in dB
|
|
msg3_DeltaPreamble = 2;
|
|
p0_NominalWithGrant = -96;
|
|
|
|
# pucch-ConfigCommon setup :
|
|
# pucchGroupHopping
|
|
# 0 = neither, 1= group hopping, 2=sequence hopping
|
|
pucchGroupHopping = 0;
|
|
hoppingId = 0;
|
|
p0_nominal = -96;
|
|
|
|
ssb_PositionsInBurst_Bitmap = 0x1;
|
|
|
|
# ssb_periodicityServingCell
|
|
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
|
|
ssb_periodicityServingCell = 2;
|
|
|
|
# dmrs_TypeA_position
|
|
# 0 = pos2, 1 = pos3
|
|
dmrs_TypeA_Position = 0;
|
|
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
subcarrierSpacing = 1;
|
|
|
|
|
|
#tdd-UL-DL-ConfigurationCommon
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
referenceSubcarrierSpacing = 1;
|
|
# pattern1
|
|
# dl_UL_TransmissionPeriodicity
|
|
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
|
|
dl_UL_TransmissionPeriodicity = 6;
|
|
nrofDownlinkSlots = 7;
|
|
nrofDownlinkSymbols = 6;
|
|
nrofUplinkSlots = 2;
|
|
nrofUplinkSymbols = 4;
|
|
|
|
ssPBCH_BlockPower = -15;
|
|
}
|
|
|
|
);
|
|
|
|
|
|
# ------- SCTP definitions
|
|
SCTP :
|
|
{
|
|
# Number of streams to use in input/output
|
|
SCTP_INSTREAMS = 2;
|
|
SCTP_OUTSTREAMS = 2;
|
|
};
|
|
|
|
|
|
////////// AMF parameters:
|
|
amf_ip_address = ({ ipv4 = "172.21.6.103"; });
|
|
|
|
NETWORK_INTERFACES :
|
|
{
|
|
GNB_IPV4_ADDRESS_FOR_NG_AMF = "172.21.18.20";
|
|
GNB_IPV4_ADDRESS_FOR_NGU = "172.21.18.20";
|
|
GNB_PORT_FOR_S1U = 2152; # Spec 2152
|
|
};
|
|
}
|
|
);
|
|
|
|
MACRLCs = (
|
|
{
|
|
num_cc = 1;
|
|
tr_s_preference = "local_L1";
|
|
tr_n_preference = "local_RRC";
|
|
pusch_TargetSNRx10 = 100;
|
|
pucch_TargetSNRx10 = 200;
|
|
dl_bler_target_upper = .35;
|
|
dl_bler_target_lower = .15;
|
|
ul_bler_target_upper = .35;
|
|
ul_bler_target_lower = .15;
|
|
pusch_FailureThres = 1000;
|
|
ul_max_mcs = 28;
|
|
}
|
|
);
|
|
|
|
L1s = (
|
|
{
|
|
num_cc = 1;
|
|
tr_n_preference = "local_mac";
|
|
prach_dtx_threshold = 90;
|
|
pucch0_dtx_threshold = 80;
|
|
pusch_dtx_threshold = 10;
|
|
max_ldpc_iterations = 15;
|
|
tx_amp_backoff_dB = 12; # needs to match O-RU configuration
|
|
L1_rx_thread_core = 3;
|
|
L1_tx_thread_core = 4;
|
|
phase_compensation = 0; # needs to match O-RU configuration
|
|
}
|
|
);
|
|
|
|
RUs = (
|
|
{
|
|
local_rf = "no";
|
|
nb_tx = 4;
|
|
nb_rx = 4;
|
|
att_tx = 0;
|
|
att_rx = 0;
|
|
bands = [78];
|
|
max_pdschReferenceSignalPower = -27;
|
|
max_rxgain = 75;
|
|
sf_extension = 0;
|
|
eNB_instances = [0];
|
|
ru_thread_core = 5;
|
|
sl_ahead = 10;
|
|
tr_preference = "raw_if4p5"; # important: activate FHI7.2
|
|
do_precoding = 0; # needs to match O-RU configuration
|
|
}
|
|
);
|
|
|
|
security = {
|
|
# preferred ciphering algorithms
|
|
# the first one of the list that an UE supports in chosen
|
|
# valid values: nea0, nea1, nea2, nea3
|
|
ciphering_algorithms = ( "nea0" );
|
|
|
|
# preferred integrity algorithms
|
|
# the first one of the list that an UE supports in chosen
|
|
# valid values: nia0, nia1, nia2, nia3
|
|
integrity_algorithms = ( "nia2", "nia0" );
|
|
|
|
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
|
|
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
|
|
drb_ciphering = "yes";
|
|
drb_integrity = "no";
|
|
};
|
|
|
|
log_config :
|
|
{
|
|
global_log_level = "info";
|
|
hw_log_level = "info";
|
|
phy_log_level = "info";
|
|
mac_log_level = "info";
|
|
rlc_log_level = "info";
|
|
pdcp_log_level = "info";
|
|
rrc_log_level = "info";
|
|
ngap_log_level = "info";
|
|
f1ap_log_level = "info";
|
|
};
|
|
|
|
fhi_72 = {
|
|
dpdk_devices = ("0000:c3:11.0", "0000:c3:11.1");
|
|
system_core = 0;
|
|
io_core = 1;
|
|
worker_cores = (2);
|
|
ru_addr = ("70:b3:d5:e1:5b:81", "70:b3:d5:e1:5b:81");
|
|
mtu = 9600;
|
|
fh_config = ({
|
|
T1a_cp_dl = (419, 470);
|
|
T1a_cp_ul = (285, 336);
|
|
T1a_up = (294, 345);
|
|
Ta4 = (0, 200);
|
|
ru_config = {
|
|
iq_width = 9;
|
|
iq_width_prach = 9;
|
|
};
|
|
});
|
|
};
|