Files
openairinterface5g/targets/ARCH/ETHERNET/USERSPACE/LIB/eth_udp.c
T

530 lines
18 KiB
C

/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
/*! \file ethernet_lib.c
* \brief API to stream I/Q samples over standard ethernet
* \author add alcatel Katerina Trilyraki, Navid Nikaein, Pedro Dinis, Lucio Ferreira, Raymond Knopp
* \date 2015
* \version 0.2
* \company Eurecom
* \maintainer: navid.nikaein@eurecom.fr
* \note
* \warning
*/
#include <arpa/inet.h>
#include <linux/if_packet.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
#include <net/if.h>
#include <netinet/ether.h>
#include <unistd.h>
#include <errno.h>
#include "common/utils/LOG/vcd_signal_dumper.h"
#include "common_lib.h"
#include "ethernet_lib.h"
//#define DEBUG 1
// These are for IF5 and must be put into the device structure if multiple RUs in the same RAU !!!!!!!!!!!!!!!!!
uint16_t pck_seq_num = 1;
uint16_t pck_seq_num_cur=0;
uint16_t pck_seq_num_prev=0;
int eth_socket_init_udp(openair0_device *device) {
eth_state_t *eth = (eth_state_t*)device->priv;
eth_params_t *eth_params = device->eth_params;
char str_local[INET_ADDRSTRLEN];
char str_remote[INET_ADDRSTRLEN];
const char *local_ip, *remote_ipc,*remote_ipd;
int local_portc=0,local_portd=0, remote_portc=0,remote_portd=0;
int sock_dom=0;
int sock_type=0;
int sock_proto=0;
int enable=1;
const char str[2][4] = {"RRU\0","RAU\0"};
int hostind = 0;
local_ip = eth_params->my_addr;
local_portc = eth_params->my_portc;
local_portd = eth_params->my_portd;
if (device->host_type == RRU_HOST ) {
remote_ipc = "0.0.0.0";
remote_ipd = eth_params->remote_addr;
remote_portc = 0;
remote_portd = eth_params->remote_portd;;
printf("[%s] local ip addr %s portc %d portd %d\n", "RRU", local_ip, local_portc, local_portd);
} else {
remote_ipc = eth_params->remote_addr;
remote_ipd = "0.0.0.0";
remote_portc = eth_params->remote_portc;
remote_portd = 0;
hostind = 1;
printf("[%s] local ip addr %s portc %d portd %d\n","RAU", local_ip, local_portc, local_portd);
}
/* Open socket to send on */
sock_dom=AF_INET;
sock_type=SOCK_DGRAM;
sock_proto=IPPROTO_UDP;
if ((eth->sockfdc = socket(sock_dom, sock_type, sock_proto)) == -1) {
perror("ETHERNET: Error opening socket (control)");
exit(0);
}
for (int i = 0;i<eth->num_fd;i++)
if ((eth->sockfdd[i] = socket(sock_dom, sock_type, sock_proto)) == -1) {
printf("ETHERNET: Error opening socket (user %d)",i);
exit(0);
}
/* initialize addresses */
bzero((void *)&(eth->dest_addrc), sizeof(eth->dest_addrc));
bzero((void *)&(eth->local_addrc), sizeof(eth->local_addrc));
bzero((void *)&(eth->dest_addrd), sizeof(eth->dest_addrd));
bzero((void *)&(eth->local_addrd), sizeof(eth->local_addrd));
eth->addr_len = sizeof(struct sockaddr_in);
eth->dest_addrc.sin_family = AF_INET;
inet_pton(AF_INET,remote_ipc,&(eth->dest_addrc.sin_addr.s_addr));
eth->dest_addrc.sin_port=htons(remote_portc);
inet_ntop(AF_INET, &(eth->dest_addrc.sin_addr), str_remote, INET_ADDRSTRLEN);
eth->dest_addrd.sin_family = AF_INET;
inet_pton(AF_INET,remote_ipd,&(eth->dest_addrd.sin_addr.s_addr));
eth->dest_addrd.sin_port=htons(remote_portd);
eth->local_addrc.sin_family = AF_INET;
inet_pton(AF_INET,local_ip,&(eth->local_addrc.sin_addr.s_addr));
eth->local_addrc.sin_port=htons(local_portc);
inet_ntop(AF_INET, &(eth->local_addrc.sin_addr), str_local, INET_ADDRSTRLEN);
eth->local_addrd.sin_family = AF_INET;
inet_pton(AF_INET,local_ip,&(eth->local_addrd.sin_addr.s_addr));
eth->local_addrd.sin_port=htons(local_portd);
/* set reuse address flag */
if (setsockopt(eth->sockfdc, SOL_SOCKET, SO_REUSEADDR, &enable, sizeof(int))) {
perror("ETHERNET: Cannot set SO_REUSEADDR option on socket (control)");
exit(0);
}
for (int i=0;i<eth->num_fd;i++) {
if (setsockopt(eth->sockfdd[i], SOL_SOCKET, SO_NO_CHECK, &enable, sizeof(int))) {
printf("ETHERNET: Cannot set SO_NO_CHECK option on socket (user %d)",i);
exit(0);
}
if (setsockopt(eth->sockfdd[i], SOL_SOCKET, SO_REUSEPORT, &enable, sizeof(int))) {
printf("ETHERNET: Cannot set SO_REUSEPORT option on socket (user %d)",i);
exit(0);
}
}
/* want to receive -> so bind */
if (bind(eth->sockfdc,(struct sockaddr *)&eth->local_addrc,eth->addr_len)<0) {
perror("ETHERNET: Cannot bind to socket (control)");
exit(0);
} else {
printf("[%s] binding to %s:%d (control)\n",str[hostind],str_local,ntohs(eth->local_addrc.sin_port));
}
for (int i=0;i<eth->num_fd;i++)
if (bind(eth->sockfdd[i],(struct sockaddr *)&eth->local_addrd,eth->addr_len)<0) {
printf("ETHERNET: Cannot bind to socket (user %d)",i);
exit(0);
} else {
printf("[%s] binding to %s:%d (user %d)\n",str[hostind],str_local,ntohs(eth->local_addrd.sin_port),i);
}
return 0;
}
int trx_eth_read_udp_IF4p5(openair0_device *device, openair0_timestamp *timestamp, void **buff, int nsamps, int cc) {
// Read nblocks info from packet itself
int nblocks = nsamps;
int bytes_received=-1;
eth_state_t *eth = (eth_state_t*)device->priv;
ssize_t packet_size = sizeof_IF4p5_header_t;
IF4p5_header_t *test_header = (IF4p5_header_t*)(buff[0]);
int block_cnt=0;
// *2 because of 2 antennas PUL/DLFFT are controlled by nsamps, PRACH is not
packet_size = max(UDP_IF4p5_PRACH_SIZE_BYTES*2, max(UDP_IF4p5_PULFFT_SIZE_BYTES(nblocks), UDP_IF4p5_PDLFFT_SIZE_BYTES(nblocks)));
while(bytes_received == -1) {
again:
bytes_received = recvfrom(eth->sockfdd[cc%eth->num_fd],
buff[0],
packet_size,
0,
(struct sockaddr *)&eth->dest_addrd,
(socklen_t *)&eth->addr_len);
if (bytes_received ==-1) {
eth->num_rx_errors++;
if (errno == EAGAIN) {
printf("Lost IF4p5 connection with %s\n", inet_ntoa(eth->dest_addrd.sin_addr));
return -1;
} else if (errno == EWOULDBLOCK) {
block_cnt++;
usleep(10);
if (block_cnt == 1000) {
perror("ETHERNET IF4p5 READ (EWOULDBLOCK): ");
} else {
printf("BLOCK BLOCK BLOCK BLOCK BLOCK BLOCK BLOCK BLOCK BLOCK BLOCK BLOCK BLOCK \n");
goto again;
}
} else {
return(-1);
//perror("ETHERNET IF4p5 READ");
//printf("(%s):\n", strerror(errno));
}
} else {
*timestamp = test_header->sub_type;
eth->rx_actual_nsamps = bytes_received>>1;
eth->rx_count++;
}
}
eth->rx_nsamps = nsamps;
return(bytes_received);
}
int trx_eth_write_udp_IF4p5(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps, int cc, int flags) {
int nblocks = nsamps;
int bytes_sent = 0;
eth_state_t *eth = (eth_state_t*)device->priv;
ssize_t packet_size;
char str[INET_ADDRSTRLEN];
inet_ntop(AF_INET, &(eth->dest_addrd.sin_addr), str, INET_ADDRSTRLEN);
if (flags == IF4p5_PDLFFT) {
packet_size = UDP_IF4p5_PDLFFT_SIZE_BYTES(nblocks);
} else if (flags == IF4p5_PULFFT) {
packet_size = UDP_IF4p5_PULFFT_SIZE_BYTES(nblocks);
} else if (flags == IF4p5_PULTICK) {
packet_size = UDP_IF4p5_PULTICK_SIZE_BYTES;
} else if ((flags >= IF4p5_PRACH)&&
(flags <= (IF4p5_PRACH+4))) {
packet_size = UDP_HEADER_SIZE_BYTES + IPV4_HEADER_SIZE_BYTES + sizeof_IF4p5_header_t + (nsamps<<1);
} else {
printf("trx_eth_write_udp_IF4p5: unknown flags %d\n",flags);
return(-1);
}
eth->tx_nsamps = nblocks;
bytes_sent = sendto(eth->sockfdd[cc%eth->num_fd],
buff[0],
packet_size,
0,
(struct sockaddr*)&eth->dest_addrd,
eth->addr_len);
if (bytes_sent == -1) {
eth->num_tx_errors++;
perror("error writing to remote unit (user) : ");
exit(-1);
} else {
eth->tx_actual_nsamps = bytes_sent>>1;
eth->tx_count++;
}
return (bytes_sent);
}
int trx_eth_write_udp(openair0_device *device, openair0_timestamp timestamp, void *buff, int nsamps,int cc, int flags) {
int bytes_sent=0;
eth_state_t *eth = (eth_state_t*)device->priv;
int sendto_flag =0;
//sendto_flag|=flags;
eth->tx_nsamps=nsamps;
int nsamps2; // aligned to upper 32 or 16 byte boundary
#if defined(__x86_64) || defined(__i386__)
#ifdef __AVX2__
nsamps2 = (nsamps+7)>>3;
__m256i buff_tx[nsamps2+1];
__m256i *buff_tx2=buff_tx+1;
#else
nsamps2 = (nsamps+3)>>2;
__m128i buff_tx[nsamps2+2];
__m128i *buff_tx2=buff_tx+2;
#endif
#elif defined(__arm__) || defined(__aarch64__)
nsamps2 = (nsamps+3)>>2;
int16x8_t buff_tx[nsamps2+2];
int16x8_t *buff_tx2=buff_tx+2;
#else
#error Unsupported CPU architecture, ethernet device cannot be built
#endif
// bring TX data into 12 MSBs
for (int j=0; j<nsamps2; j++) {
#if defined(__x86_64__) || defined(__i386__)
#ifdef __AVX2__
buff_tx2[j] = _mm256_slli_epi16(((__m256i *)buff)[j],4);
#else
buff_tx2[j] = _mm_slli_epi16(((__m128i *)buff)[j],4);
#endif
#elif defined(__arm__)
buff_tx2[j] = vshlq_n_s16(((int16x8_t *)buff)[j],4);
#endif
}
/* buff[i] points to the position in tx buffer where the payload to be sent is
buff2 points to the position in tx buffer where the packet header will be placed */
void *buff2 = ((void*)buff_tx2)- APP_HEADER_SIZE_BYTES;
bytes_sent = 0;
/* constract application header */
// ECPRI Protocol revision + reserved bits (1 byte)
*(uint8_t *)buff2 = ECPRIREV;
// ECPRI Message type (1 byte)
*(uint8_t *)(buff2 + 1) = 64;
// ECPRI Payload Size (2 bytes)
AssertFatal(nsamps<16381,"nsamps > 16381\n");
*(uint8_t *)(buff2 + 2) = (nsamps<<2)>>8;
*(uint8_t *)(buff2 + 3) = (nsamps<<2)&0xff;
// ECPRI PC_ID (2 bytes)
*(uint16_t *)(buff2 + 4) = cc;
// OAI modified SEQ_ID (4 bytes)
*(uint64_t *)(buff2 + 6) = ((uint64_t )timestamp)*6;
/*
printf("ECPRI TX (REV %x, MessType %d, Payload size %d, PC_ID %d, TS %llu\n",
*(uint8_t *)buff2,
*(uint8_t *)(buff2+1),
*(uint16_t *)(buff2+2),
*(uint16_t *)(buff2+4),
*(uint64_t *)(buff2+6));
*/
int sent_byte;
if (eth->compression == ALAW_COMPRESS) {
sent_byte = UDP_PACKET_SIZE_BYTES_ALAW(nsamps);
} else {
sent_byte = UDP_PACKET_SIZE_BYTES(nsamps);
}
//while(bytes_sent < sent_byte) {
//printf("eth->pck_seq_num: %d\n", eth->pck_seq_num);
#if DEBUG
printf("------- TX ------: buff2 current position=%d remaining_bytes=%d bytes_sent=%d \n",
(void *)(buff2+bytes_sent),
sent_byte - bytes_sent,
bytes_sent);
#endif
/* Send packet */
bytes_sent = sendto(eth->sockfdd[cc%eth->num_fd],
buff2,
sent_byte,
sendto_flag,
(struct sockaddr*)&eth->dest_addrd,
eth->addr_len);
if ( bytes_sent == -1) {
eth->num_tx_errors++;
perror("ETHERNET WRITE: ");
exit(-1);
} else {
#if DEBUG
printf("------- TX ------: nu=%d an_id=%d ts%d bytes_send=%d\n",
*(int16_t *)buff2,
*(int16_t *)(buff2 + sizeof(int16_t)),
*(openair0_timestamp *)(buff2 + sizeof(int32_t)),
bytes_sent);
dump_packet((device->host_type == RAU_HOST)? "RAU":"RAU", buff2, UDP_PACKET_SIZE_BYTES(nsamps), TX_FLAG);
#endif
eth->tx_actual_nsamps=bytes_sent>>2;
eth->tx_count++;
eth->pck_seq_num++;
if ( eth->pck_seq_num > MAX_PACKET_SEQ_NUM(nsamps,device->openair0_cfg->samples_per_frame) ) eth->pck_seq_num = 1;
}
//}
return (bytes_sent-APP_HEADER_SIZE_BYTES)>>2;
}
extern int oai_exit;
void *udp_read_thread(void *arg) {
openair0_timestamp TS;
int aid;
udp_read_t *u = (udp_read_t *)arg;
openair0_device *device=u->device;
fhstate_t *fhstate = &device->fhstate;
char buffer[UDP_PACKET_SIZE_BYTES(256)];
while (oai_exit == 0) {
printf("UDP read thread %d, waiting for start\n",u->thread_id);
while (fhstate->active > 0) {
size_t count = recvfrom(((eth_state_t*)device->priv)->sockfdd[u->thread_id],
buffer,sizeof(buffer),0,
(struct sockaddr *)&((eth_state_t*)device->priv)->dest_addrd,
(socklen_t *)&((eth_state_t*)device->priv)->addr_len);
aid = *(uint16_t*)(&buffer[ECPRICOMMON_BYTES]);
TS = *(openair0_timestamp *)(&buffer[ECPRICOMMON_BYTES+ECPRIPCID_BYTES]);
// convert TS to samples, /6 for AW2S @ 30.72 Ms/s, this is converted for other sample rates in OAI application
TS = device->sampling_rate_ratio_n*(TS/device->sampling_rate_ratio_d/6);
printf("udp_thread_id %d count %d, aid %d, TS %llu\n",u->thread_id,count,aid,(unsigned long long)TS);
if (count <= 0) { printf("problem in recvfrom\n"); exit(-1); }
AssertFatal(aid < 8,"Cannot handle more than 8 antennas, got aid %d\n",aid);
fhstate->r[aid]=1;
if (aid==0 && fhstate->TS[0] == 0) fhstate->TS0 = TS;
/* store the timestamp value from packet's header */
fhstate->TS[aid] = TS;
int64_t offset = TS - fhstate->TS0;
if (offset > 0) offset = offset % device->openair0_cfg->rxsize;
else offset = TS % device->openair0_cfg->rxsize + ((((uint64_t)1)<<63)-(fhstate->TS0-1)) % device->openair0_cfg->rxsize;
printf("udp_thread_id %d aid %d, TS %llu, TS0 %llu, offset %d, size %d\n",u->thread_id,aid,(unsigned long long)TS,fhstate->TS0,offset,device->openair0_cfg->rxsize);
// need to do memcpy since there is no guarantee that aid is the same each time, otherwise we could have used
// zero-copy and corrected the header component.
memcpy((void*)(device->openair0_cfg->rxbase[aid]+offset),
(void*)&buffer[APP_HEADER_SIZE_BYTES],
count-APP_HEADER_SIZE_BYTES);
}
sleep(1);
}
}
int trx_eth_read_udp(openair0_device *device, openair0_timestamp *timestamp, uint32_t **buff, int nsamps) {
eth_state_t *eth = (eth_state_t*)device->priv;
fhstate_t *fhstate = &device->fhstate;
openair0_timestamp prev_read_TS= fhstate->TS_read, min_TS;
// block until FH is ready
while (fhstate->r[0] == 0 || fhstate->r[1] == 0 || fhstate->r[2] == 0 || fhstate->r[3] == 0 ||
fhstate->r[4] == 0 || fhstate->r[5] == 0 || fhstate->r[6] == 0 || fhstate->r[7] == 0) usleep(100);
// get minimum TS over all antennas
min_TS = fhstate->TS[0];
for (int i=1;i<device->openair0_cfg->rx_num_channels;i++) min_TS = min(min_TS,fhstate->TS[i]);
// poll/sleep until we accumulated enough samples on each antenna port
while (min_TS < prev_read_TS + nsamps) {
usleep(100);
min_TS = fhstate->TS[0];
for (int i=1;i<device->openair0_cfg->rx_num_channels;i++) min_TS = min(min_TS,fhstate->TS[i]);
}
/*
// openair0_timestamp prev_timestamp = -1;
int rcvfrom_flag =0;
int block_cnt=0;
int again_cnt=0;
static int packet_cnt=0;
int payload_size = UDP_PACKET_SIZE_BYTES(nsamps);
// we need a temporary storage buffer since the antenna ID is in the packet
int nsamps2 = (payload_size>>2)+(APP_HEADER_SIZE_BYTES>>2);
int32_t temp_rx[nsamps2+1];
char *temp_rx0 = ((char *)&temp_rx[1+(APP_HEADER_SIZE_BYTES>>2)]) - APP_HEADER_SIZE_BYTES;
eth->rx_nsamps=nsamps;
bytes_received=0;
block_cnt=0;
AssertFatal(eth->compression == NO_COMPRESS, "IF5 compression not supported for now\n");
bytes_received =recvfrom(eth->sockfdd[sockid%eth->num_fd],
(void*)temp_rx0,
payload_size,
rcvfrom_flag,
(struct sockaddr *)&eth->dest_addrd,
(socklen_t *)&eth->addr_len);
if (bytes_received ==-1) {
eth->num_rx_errors++;
} else {
// store the timestamp value from packet's header
*timestamp = *(openair0_timestamp *)(temp_rx0 + ECPRICOMMON_BYTES+ECPRIPCID_BYTES);
// convert TS to samples, /6 for AW2S @ 30.72 Ms/s, this is converted for other sample rates in OAI application
*timestamp = *timestamp/6;
*cc = *(uint16_t*)(temp_rx0 + ECPRICOMMON_BYTES);
eth->rx_actual_nsamps=payload_size>>2;
eth->rx_count++;
}
if (buff) memcpy((void*)(buff[*cc]+packet_idx*nsamps),
(void*)(temp_rx+1),
nsamps<<2);
*/
*timestamp = fhstate->TS_read;
fhstate->TS_read = prev_read_TS + nsamps;
return (nsamps);
}
int trx_eth_ctlsend_udp(openair0_device *device, void *msg, ssize_t msg_len) {
return(sendto(((eth_state_t*)device->priv)->sockfdc,
msg,
msg_len,
0,
(struct sockaddr *)&((eth_state_t*)device->priv)->dest_addrc,
((eth_state_t*)device->priv)->addr_len));
}
int trx_eth_ctlrecv_udp(openair0_device *device, void *msg, ssize_t msg_len) {
return (recvfrom(((eth_state_t*)device->priv)->sockfdc,
msg,
msg_len,
0,
(struct sockaddr *)&((eth_state_t*)device->priv)->dest_addrc,
(socklen_t *)&((eth_state_t*)device->priv)->addr_len));
}