maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
0e6f1e6ad674703b8358764cbc3251e6a03faf2b
openairinterface5g/openair1/PHY/defs_nr_common.h
T

388 lines
12 KiB
C
Raw Blame History

/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
/*! \file PHY/defs_nr_common.h
\brief Top-level defines and structure definitions
\author Guy De Souza
\date 2018
\version 0.1
\company Eurecom
\email: desouza@eurecom.fr
\note
\warning
*/
#ifndef __PHY_DEFS_NR_COMMON__H__
#define __PHY_DEFS_NR_COMMON__H__
#include "PHY/impl_defs_top.h"
#include "defs_common.h"
#include "nfapi_nr_interface_scf.h"
#include "impl_defs_nr.h"
#include "PHY/CODING/nrPolar_tools/nr_polar_defs.h"
#define nr_subframe_t lte_subframe_t
#define nr_slot_t lte_subframe_t
#define MAX_NUM_SUBCARRIER_SPACING 5
#define NR_MAX_NB_RB 275
#define NR_NB_SC_PER_RB 12
#define NR_NB_REG_PER_CCE 6
#define NR_SYMBOLS_PER_SLOT 14
#define ONE_OVER_SQRT2_Q15 23170
#define ONE_OVER_TWO_Q15 16384
#define NR_MOD_TABLE_SIZE_SHORT 686
#define NR_MOD_TABLE_BPSK_OFFSET 1
#define NR_MOD_TABLE_QPSK_OFFSET 3
#define NR_MOD_TABLE_QAM16_OFFSET 7
#define NR_MOD_TABLE_QAM64_OFFSET 23
#define NR_MOD_TABLE_QAM256_OFFSET 87
#define NR_PSS_LENGTH 127
#define NR_SSS_LENGTH 127
#define NR_PBCH_DMRS_LENGTH 144 // in mod symbols
#define NR_PBCH_DMRS_LENGTH_DWORD 10 // ceil(2(QPSK)*NR_PBCH_DMRS_LENGTH/32)
/*These max values are for the gold sequences which are generated at init for the
* full carrier bandwidth*/
#define NR_MAX_PDCCH_DMRS_INIT_LENGTH ((NR_MAX_NB_RB<<1)*3) // 3 symbols *2(QPSK)
#define NR_MAX_PDCCH_DMRS_INIT_LENGTH_DWORD 52 // ceil(NR_MAX_PDCCH_DMRS_LENGTH/32)
/*used for the resource mapping*/
#define NR_MAX_PDCCH_DMRS_LENGTH 576 // 16(L)*2(QPSK)*3(3 DMRS symbs per REG)*6(REG per CCE)
#define NR_MAX_PDSCH_DMRS_LENGTH 3300 //275*6(k)*2(QPSK real+imag)
#define NR_MAX_PDSCH_DMRS_INIT_LENGTH_DWORD 104 // ceil(NR_MAX_PDSCH_DMRS_LENGTH/32)
#define NR_MAX_CSI_RS_LENGTH 4400 //275*8(max allocation per RB)*2(QPSK)
#define NR_MAX_CSI_RS_INIT_LENGTH_DWORD 138 // ceil(NR_MAX_CSI_RS_LENGTH/32)
#define NR_MAX_PUSCH_DMRS_LENGTH NR_MAX_PDSCH_DMRS_LENGTH
#define NR_MAX_PUSCH_DMRS_INIT_LENGTH_DWORD NR_MAX_PDSCH_DMRS_INIT_LENGTH_DWORD
#define NR_MAX_DCI_PAYLOAD_SIZE 64
#define NR_MAX_DCI_SIZE 1728 //16(L)*2(QPSK)*9(12 RE per REG - 3(DMRS))*6(REG per CCE)
#define NR_MAX_DCI_SIZE_DWORD 54 // ceil(NR_MAX_DCI_SIZE/32)
#define NR_MAX_NUM_BWP 4
#define NR_MAX_PDCCH_AGG_LEVEL 16 // 3GPP TS 38.211 V15.8 Section 7.3.2 Table 7.3.2.1-1: Supported PDCCH aggregation levels
#define NR_MAX_CSET_DURATION 3
#define NR_MAX_NB_RBG 18
#define NR_MAX_NB_LAYERS 8 // SU-MIMO (3GPP TS 38.211 V15.4.0 section 7.3.1.3)
#define NR_MAX_NB_CODEWORDS 2
#define NR_MAX_NB_HARQ_PROCESSES 16
#define NR_MAX_PDSCH_ENCODED_LENGTH NR_MAX_NB_RB*NR_SYMBOLS_PER_SLOT*NR_NB_SC_PER_RB*8*NR_MAX_NB_LAYERS // 8 is the maximum modulation order (it was 950984 before !!)
#define NR_MAX_PUSCH_ENCODED_LENGTH NR_MAX_PDSCH_ENCODED_LENGTH
#define NR_MAX_PDSCH_TBS 3824
#define NR_MAX_SIB_LENGTH 2976 // 3GPP TS 38.331 section 5.2.1 - The physical layer imposes a limit to the maximum size a SIB can take. The maximum SIB1 or SI message size is 2976 bits.
#define MAX_NUM_NR_DLSCH_SEGMENTS 34
#define MAX_NR_DLSCH_PAYLOAD_BYTES (MAX_NUM_NR_DLSCH_SEGMENTS*1056)
#define MAX_NUM_NR_ULSCH_SEGMENTS MAX_NUM_NR_DLSCH_SEGMENTS
#define MAX_NR_ULSCH_PAYLOAD_BYTES (MAX_NUM_NR_ULSCH_SEGMENTS*1056)
#define MAX_NUM_NR_CHANNEL_BITS (14*273*12*8) // 14 symbols, 273 RB
#define MAX_NUM_NR_RE (14*273*12)
extern const uint8_t nr_rv_round_map[4];
extern const uint8_t nr_rv_round_map_ue[4];
typedef enum {
NR_MU_0=0,
NR_MU_1,
NR_MU_2,
NR_MU_3,
NR_MU_4,
} nr_numerology_index_e;
typedef enum {
kHz15=0,
kHz30,
kHz60,
kHz120,
kHz240
} nr_scs_e;
typedef enum{
nr_ssb_type_A = 0,
nr_ssb_type_B,
nr_ssb_type_C,
nr_ssb_type_D,
nr_ssb_type_E
} nr_ssb_type_e;
typedef enum {
nr_FR1 = 0,
nr_FR2
} nr_frequency_range_e;
typedef enum {
MOD_BPSK=0,
MOD_QPSK,
MOD_QAM16,
MOD_QAM64,
MOD_QAM256
}nr_mod_t;
typedef enum {
RA_2STEP = 0,
RA_4STEP
} nr_ra_type_e;
typedef struct {
/// Size of first RBG
uint8_t start_size;
/// Nominal size
uint8_t P;
/// Size of last RBG
uint8_t end_size;
/// Number of RBG
uint8_t N_RBG;
}nr_rbg_parms_t;
typedef struct {
/// Size of first PRG
uint8_t start_size;
/// Nominal size
uint8_t P_prime;
/// Size of last PRG
uint8_t end_size;
/// Number of PRG
uint8_t N_PRG;
} nr_prg_parms_t;
typedef struct NR_BWP_PARMS {
/// BWP ID
uint8_t bwp_id;
/// Subcarrier spacing
nr_scs_e scs;
/// Freq domain location -- 1st CRB index
uint8_t location;
/// Bandwidth in PRB
uint16_t N_RB;
/// Cyclic prefix
uint8_t cyclic_prefix;
/// RBG params
nr_rbg_parms_t rbg_parms;
/// PRG params
nr_prg_parms_t prg_parms;
} NR_BWP_PARMS;
typedef struct {
uint8_t reg_idx;
uint16_t start_sc_idx;
uint8_t symb_idx;
} nr_reg_t;
typedef struct {
uint8_t cce_idx;
nr_reg_t reg_list[NR_NB_REG_PER_CCE];
} nr_cce_t;
typedef struct {
/// PRACH format retrieved from prach_ConfigIndex
uint16_t prach_format;
/// Preamble index for PRACH (0-63)
uint8_t ra_PreambleIndex;
/// Preamble Tx Counter
uint8_t RA_PREAMBLE_TRANSMISSION_COUNTER;
/// Preamble Power Ramping Counter
uint8_t RA_PREAMBLE_POWER_RAMPING_COUNTER;
/// 2-step RA power offset
int POWER_OFFSET_2STEP_RA;
/// Target received power at gNB. Baseline is range -202..-60 dBm. Depends on delta preamble, power ramping counter and step.
int ra_PREAMBLE_RECEIVED_TARGET_POWER;
/// PRACH index for TDD (0 ... 6) depending on TDD configuration and prachConfigIndex
uint8_t ra_TDD_map_index;
/// RA Preamble Power Ramping Step in dB
uint32_t RA_PREAMBLE_POWER_RAMPING_STEP;
///
uint8_t RA_PREAMBLE_BACKOFF;
///
uint8_t RA_SCALING_FACTOR_BI;
/// Indicating whether it is 2-step or 4-step RA
nr_ra_type_e RA_TYPE;
/// UE configured maximum output power
int RA_PCMAX;
/// Corresponding RA-RNTI for UL-grant
uint16_t ra_RNTI;
/// Pointer to Msg3 payload for UL-grant
uint8_t *Msg3;
/// Frame of last completed synch
uint16_t sync_frame;
/// Flag to indicate that prach is ready to start: it is enabled with an initial delay after the sync
uint8_t init_msg1;
} NR_PRACH_RESOURCES_t;
typedef struct NR_DL_FRAME_PARMS NR_DL_FRAME_PARMS;
typedef uint32_t (*get_samples_per_slot_t)(int slot, NR_DL_FRAME_PARMS* fp);
typedef uint32_t (*get_slot_from_timestamp_t)(openair0_timestamp timestamp_rx, NR_DL_FRAME_PARMS* fp);
typedef uint32_t (*get_samples_slot_timestamp_t)(int slot, NR_DL_FRAME_PARMS* fp, uint8_t sl_ahead);
struct NR_DL_FRAME_PARMS {
/// frequency range
nr_frequency_range_e freq_range;
// /// Placeholder to replace overlapping fields below
// nfapi_nr_rf_config_t rf_config;
/// Placeholder to replace SSB overlapping fields below
// nfapi_nr_sch_config_t sch_config;
/// Number of resource blocks (RB) in DL
int N_RB_DL;
/// Number of resource blocks (RB) in UL
int N_RB_UL;
/// total Number of Resource Block Groups: this is ceil(N_PRB/P)
uint8_t N_RBG;
/// Total Number of Resource Block Groups SubSets: this is P
uint8_t N_RBGS;
/// NR Band
uint16_t nr_band;
/// DL carrier frequency
uint64_t dl_CarrierFreq;
/// UL carrier frequency
uint64_t ul_CarrierFreq;
/// TX attenuation
uint32_t att_tx;
/// RX attenuation
uint32_t att_rx;
/// total Number of Resource Block Groups: this is ceil(N_PRB/P)
/// Frame type (0 FDD, 1 TDD)
lte_frame_type_t frame_type;
uint8_t tdd_config;
/// Cell ID
uint16_t Nid_cell;
/// subcarrier spacing (15,30,60,120)
uint32_t subcarrier_spacing;
/// 3/4 sampling
uint8_t threequarter_fs;
/// Size of FFT
uint16_t ofdm_symbol_size;
/// Number of prefix samples in all but first symbol of slot
uint16_t nb_prefix_samples;
/// Number of prefix samples in first symbol of slot
uint16_t nb_prefix_samples0;
/// Carrier offset in FFT buffer for first RE in PRB0
uint16_t first_carrier_offset;
/// Number of OFDM/SC-FDMA symbols in one slot
uint16_t symbols_per_slot;
/// Number of slots per subframe
uint16_t slots_per_subframe;
/// Number of slots per frame
uint16_t slots_per_frame;
/// Number of samples in a subframe
uint32_t samples_per_subframe;
/// Number of samples in current slot
get_samples_per_slot_t get_samples_per_slot;
/// slot calculation from timestamp
get_slot_from_timestamp_t get_slot_from_timestamp;
/// Number of samples before slot
get_samples_slot_timestamp_t get_samples_slot_timestamp;
/// Number of samples in 0th and center slot of a subframe
uint32_t samples_per_slot0;
/// Number of samples in other slots of the subframe
uint32_t samples_per_slotN0;
/// Number of samples in a radio frame
uint32_t samples_per_frame;
/// Number of samples in a subframe without CP
uint32_t samples_per_subframe_wCP;
/// Number of samples in a slot without CP
uint32_t samples_per_slot_wCP;
/// Number of samples in a radio frame without CP
uint32_t samples_per_frame_wCP;
/// NR numerology index [0..5] as specified in 38.211 Section 4 (mu). 0=15khZ SCS, 1=30khZ, 2=60kHz, etc
uint8_t numerology_index;
/// Number of Physical transmit antennas in node
uint8_t nb_antennas_tx;
/// Number of Receive antennas in node
uint8_t nb_antennas_rx;
/// Number of common transmit antenna ports in eNodeB (1 or 2)
uint8_t nb_antenna_ports_gNB;
/// Cyclic Prefix for DL (0=Normal CP, 1=Extended CP)
lte_prefix_type_t Ncp;
/// sequence which is computed based on carrier frequency and numerology to rotate/derotate each OFDM symbol according to Section 5.3 in 38.211
int16_t symbol_rotation[224*2];
/// shift of pilot position in one RB
uint8_t nushift;
/// SRS configuration from TS 38.331 RRC
SRS_NR srs_nr;
/// Power used by SSB in order to estimate signal strength and path loss
int ss_PBCH_BlockPower;
/// for NR TDD management
TDD_UL_DL_configCommon_t *p_tdd_UL_DL_Configuration;
TDD_UL_DL_configCommon_t *p_tdd_UL_DL_ConfigurationCommon2;
TDD_UL_DL_SlotConfig_t *p_TDD_UL_DL_ConfigDedicated;
/// TDD configuration
uint16_t tdd_uplink_nr[2*NR_MAX_SLOTS_PER_FRAME]; /* this is a bitmap of symbol of each slot given for 2 frames */
uint8_t half_frame_bit;
//SSB related params
/// Start in Subcarrier index of the SSB block
uint16_t ssb_start_subcarrier;
/// SSB type
nr_ssb_type_e ssb_type;
/// Max number of SSB in frame
uint8_t Lmax;
/// SS block pattern (max 64 ssb, each bit is on/off ssb)
uint64_t L_ssb;
/// Total number of SSB transmitted
uint8_t N_ssb;
/// SSB index
uint8_t ssb_index;
/// PBCH polar encoder params
t_nrPolar_params pbch_polar_params;
};
#define KHz (1000UL)
#define MHz (1000*KHz)
typedef struct nr_bandentry_s {
int16_t band;
uint64_t ul_min;
uint64_t ul_max;
uint64_t dl_min;
uint64_t dl_max;
uint64_t step_size;
uint64_t N_OFFs_DL;
uint8_t deltaf_raster;
} nr_bandentry_t;
typedef struct nr_band_info_s {
int nbands;
nr_bandentry_t band_info[100];
} nr_band_info_t;
#endif
Reference in New Issue View Git Blame Copy Permalink