maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
0f3629ae92bdd81c9d48853c06cb225e94e7f936
openairinterface5g/executables/nr-uesoftmodem.c
T
rmagueta 0f3629ae92 Merge branch 'develop' of https://gitlab.eurecom.fr/oai/openairinterface5g into develop-sib1 
 Conflicts:
	openair2/LAYER2/NR_MAC_UE/nr_ue_procedures.c
2020-12-18 13:43:48 +00:00

599 lines
20 KiB
C
Raw Blame History

/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
#define _GNU_SOURCE /* See feature_test_macros(7) */
#include <sched.h>
#include "T.h"
#include "assertions.h"
#include "PHY/types.h"
#include "PHY/defs_nr_UE.h"
#include "SCHED_NR_UE/defs.h"
#include "common/ran_context.h"
#include "common/config/config_userapi.h"
//#include "common/utils/threadPool/thread-pool.h"
#include "common/utils/load_module_shlib.h"
//#undef FRAME_LENGTH_COMPLEX_SAMPLES //there are two conflicting definitions, so we better make sure we don't use it at all
#include "../../ARCH/COMMON/common_lib.h"
#include "../../ARCH/ETHERNET/USERSPACE/LIB/if_defs.h"
//#undef FRAME_LENGTH_COMPLEX_SAMPLES //there are two conflicting definitions, so we better make sure we don't use it at all
#include "openair1/PHY/MODULATION/nr_modulation.h"
#include "PHY/phy_vars_nr_ue.h"
#include "PHY/NR_UE_TRANSPORT/nr_transport_proto_ue.h"
#include "SCHED/sched_common_vars.h"
#include "PHY/MODULATION/modulation_vars.h"
//#include "../../SIMU/USER/init_lte.h"
#include "LAYER2/MAC/mac_vars.h"
#include "RRC/LTE/rrc_vars.h"
#include "PHY_INTERFACE/phy_interface_vars.h"
#include "openair1/SIMULATION/TOOLS/sim.h"
#ifdef SMBV
#include "PHY/TOOLS/smbv.h"
unsigned short config_frames[4] = {2,9,11,13};
#endif
#include "common/utils/LOG/log.h"
#include "common/utils/LOG/vcd_signal_dumper.h"
#include "UTIL/OPT/opt.h"
#include "enb_config.h"
//#include "PHY/TOOLS/time_meas.h"
#ifndef OPENAIR2
#include "UTIL/OTG/otg_vars.h"
#endif
#include "intertask_interface.h"
#include "PHY/INIT/phy_init.h"
#include "system.h"
#include <openair2/RRC/NR_UE/rrc_proto.h>
#include <openair2/LAYER2/NR_MAC_UE/mac_defs.h>
#include <openair2/LAYER2/NR_MAC_UE/mac_proto.h>
#include <openair2/NR_UE_PHY_INTERFACE/NR_IF_Module.h>
#include <openair1/SCHED_NR_UE/fapi_nr_ue_l1.h>
/* Callbacks, globals and object handlers */
//#include "stats.h"
// current status is that every UE has a DL scope for a SINGLE eNB (eNB_id=0)
#include "PHY/TOOLS/phy_scope_interface.h"
#include "PHY/TOOLS/nr_phy_scope.h"
#include <executables/nr-uesoftmodem.h>
#include "executables/softmodem-common.h"
#include "executables/thread-common.h"
extern const char *duplex_mode[];
// Thread variables
pthread_cond_t nfapi_sync_cond;
pthread_mutex_t nfapi_sync_mutex;
int nfapi_sync_var=-1; //!< protected by mutex \ref nfapi_sync_mutex
uint16_t sf_ahead=6; //??? value ???
pthread_cond_t sync_cond;
pthread_mutex_t sync_mutex;
int sync_var=-1; //!< protected by mutex \ref sync_mutex.
int config_sync_var=-1;
tpool_t *Tpool;
#ifdef UE_DLSCH_PARALLELISATION
tpool_t *Tpool_dl;
#endif
RAN_CONTEXT_t RC;
volatile int start_eNB = 0;
volatile int start_UE = 0;
volatile int oai_exit = 0;
// Command line options
extern int16_t nr_dlsch_demod_shift;
static int tx_max_power[MAX_NUM_CCs] = {0};
int single_thread_flag = 1;
int threequarter_fs = 0;
int UE_scan_carrier = 0;
int UE_fo_compensation = 0;
int UE_no_timing_correction = 0;
int N_RB_DL = 0;
int tddflag = 0;
int vcdflag = 0;
uint8_t nb_antenna_tx = 1;
uint8_t nb_antenna_rx = 1;
double rx_gain_off = 0.0;
uint32_t timing_advance = 0;
char *usrp_args = NULL;
char *rrc_config_path = NULL;
int dumpframe = 0;
uint64_t downlink_frequency[MAX_NUM_CCs][4];
int32_t uplink_frequency_offset[MAX_NUM_CCs][4];
int rx_input_level_dBm;
#if MAX_NUM_CCs == 1
rx_gain_t rx_gain_mode[MAX_NUM_CCs][4] = {{max_gain,max_gain,max_gain,max_gain}};
double tx_gain[MAX_NUM_CCs][4] = {{20,0,0,0}};
double rx_gain[MAX_NUM_CCs][4] = {{110,0,0,0}};
#else
rx_gain_t rx_gain_mode[MAX_NUM_CCs][4] = {{max_gain,max_gain,max_gain,max_gain},{max_gain,max_gain,max_gain,max_gain}};
double tx_gain[MAX_NUM_CCs][4] = {{20,0,0,0},{20,0,0,0}};
double rx_gain[MAX_NUM_CCs][4] = {{110,0,0,0},{20,0,0,0}};
#endif
// UE and OAI config variables
openair0_config_t openair0_cfg[MAX_CARDS];
int16_t node_synch_ref[MAX_NUM_CCs];
int otg_enabled;
double cpuf;
runmode_t mode = normal_txrx;
int UE_scan = 0;
int chain_offset = 0;
int card_offset = 0;
uint64_t num_missed_slots = 0; // counter for the number of missed slots
int transmission_mode = 1;
int numerology = 0;
int usrp_tx_thread = 0;
int oaisim_flag = 0;
int emulate_rf = 0;
char uecap_xer[1024],uecap_xer_in=0;
/* see file openair2/LAYER2/MAC/main.c for why abstraction_flag is needed
* this is very hackish - find a proper solution
*/
uint8_t abstraction_flag=0;
/*---------------------BMC: timespec helpers -----------------------------*/
struct timespec min_diff_time = { .tv_sec = 0, .tv_nsec = 0 };
struct timespec max_diff_time = { .tv_sec = 0, .tv_nsec = 0 };
struct timespec clock_difftime(struct timespec start, struct timespec end) {
struct timespec temp;
if ((end.tv_nsec-start.tv_nsec)<0) {
temp.tv_sec = end.tv_sec-start.tv_sec-1;
temp.tv_nsec = 1000000000+end.tv_nsec-start.tv_nsec;
} else {
temp.tv_sec = end.tv_sec-start.tv_sec;
temp.tv_nsec = end.tv_nsec-start.tv_nsec;
}
return temp;
}
void print_difftimes(void) {
LOG_I(HW,"difftimes min = %lu ns ; max = %lu ns\n", min_diff_time.tv_nsec, max_diff_time.tv_nsec);
}
void exit_function(const char *file, const char *function, const int line, const char *s) {
int CC_id;
if (s != NULL) {
printf("%s:%d %s() Exiting OAI softmodem: %s\n",file,line, function, s);
}
oai_exit = 1;
if (PHY_vars_UE_g && PHY_vars_UE_g[0]) {
for(CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
if (PHY_vars_UE_g[0][CC_id] && PHY_vars_UE_g[0][CC_id]->rfdevice.trx_end_func)
PHY_vars_UE_g[0][CC_id]->rfdevice.trx_end_func(&PHY_vars_UE_g[0][CC_id]->rfdevice);
}
}
sleep(1); //allow lte-softmodem threads to exit first
exit(1);
}
void *l2l1_task(void *arg) {
MessageDef *message_p = NULL;
int result;
itti_set_task_real_time(TASK_L2L1);
itti_mark_task_ready(TASK_L2L1);
do {
// Wait for a message
itti_receive_msg (TASK_L2L1, &message_p);
switch (ITTI_MSG_ID(message_p)) {
case TERMINATE_MESSAGE:
oai_exit=1;
itti_exit_task ();
break;
case ACTIVATE_MESSAGE:
start_UE = 1;
break;
case DEACTIVATE_MESSAGE:
start_UE = 0;
break;
case MESSAGE_TEST:
LOG_I(EMU, "Received %s\n", ITTI_MSG_NAME(message_p));
break;
default:
LOG_E(EMU, "Received unexpected message %s\n", ITTI_MSG_NAME(message_p));
break;
}
result = itti_free (ITTI_MSG_ORIGIN_ID(message_p), message_p);
AssertFatal (result == EXIT_SUCCESS, "Failed to free memory (%d)!\n", result);
} while(!oai_exit);
return NULL;
}
static void get_options(void) {
char *loopfile=NULL;
paramdef_t cmdline_params[] =CMDLINE_PARAMS_DESC_UE ;
config_process_cmdline( cmdline_params,sizeof(cmdline_params)/sizeof(paramdef_t),NULL);
paramdef_t cmdline_uemodeparams[] = CMDLINE_UEMODEPARAMS_DESC;
paramdef_t cmdline_ueparams[] = CMDLINE_NRUEPARAMS_DESC;
config_process_cmdline( cmdline_uemodeparams,sizeof(cmdline_uemodeparams)/sizeof(paramdef_t),NULL);
config_process_cmdline( cmdline_ueparams,sizeof(cmdline_ueparams)/sizeof(paramdef_t),NULL);
if ( (cmdline_uemodeparams[CMDLINE_CALIBUERX_IDX].paramflags & PARAMFLAG_PARAMSET) != 0) mode = rx_calib_ue;
if ( (cmdline_uemodeparams[CMDLINE_CALIBUERXMED_IDX].paramflags & PARAMFLAG_PARAMSET) != 0) mode = rx_calib_ue_med;
if ( (cmdline_uemodeparams[CMDLINE_CALIBUERXBYP_IDX].paramflags & PARAMFLAG_PARAMSET) != 0) mode = rx_calib_ue_byp;
if (cmdline_uemodeparams[CMDLINE_DEBUGUEPRACH_IDX].uptr)
if ( *(cmdline_uemodeparams[CMDLINE_DEBUGUEPRACH_IDX].uptr) > 0) mode = debug_prach;
if (cmdline_uemodeparams[CMDLINE_NOL2CONNECT_IDX].uptr)
if ( *(cmdline_uemodeparams[CMDLINE_NOL2CONNECT_IDX].uptr) > 0) mode = no_L2_connect;
if (cmdline_uemodeparams[CMDLINE_CALIBPRACHTX_IDX].uptr)
if ( *(cmdline_uemodeparams[CMDLINE_CALIBPRACHTX_IDX].uptr) > 0) mode = calib_prach_tx;
if ((cmdline_uemodeparams[CMDLINE_DUMPMEMORY_IDX].paramflags & PARAMFLAG_PARAMSET) != 0)
mode = rx_dump_frame;
if (vcdflag > 0)
ouput_vcd = 1;
if ( !(CONFIG_ISFLAGSET(CONFIG_ABORT)) && (!(CONFIG_ISFLAGSET(CONFIG_NOOOPT))) ) {
// Here the configuration file is the XER encoded UE capabilities
// Read it in and store in asn1c data structures
sprintf(uecap_xer,"%stargets/PROJECTS/GENERIC-LTE-EPC/CONF/UE_config.xml",getenv("OPENAIR_HOME"));
printf("%s\n",uecap_xer);
uecap_xer_in=1;
} /* UE with config file */
}
// set PHY vars from command line
void set_options(int CC_id, PHY_VARS_NR_UE *UE){
// Init power variables
tx_max_power[CC_id] = tx_max_power[0];
rx_gain[0][CC_id] = rx_gain[0][0];
tx_gain[0][CC_id] = tx_gain[0][0];
// Set UE variables
UE->UE_scan = UE_scan;
UE->UE_scan_carrier = UE_scan_carrier;
UE->UE_fo_compensation = UE_fo_compensation;
UE->no_timing_correction = UE_no_timing_correction;
UE->mode = mode;
UE->rx_total_gain_dB = (int)rx_gain[CC_id][0] + rx_gain_off;
UE->tx_total_gain_dB = (int)tx_gain[CC_id][0];
UE->tx_power_max_dBm = tx_max_power[CC_id];
UE->rf_map.card = card_offset;
UE->rf_map.chain = CC_id + chain_offset;
UE->timing_advance = timing_advance;
LOG_I(PHY,"Set UE mode %d, UE_fo_compensation %d, UE_scan %d, UE_scan_carrier %d, UE_no_timing_correction %d \n", mode, UE_fo_compensation, UE_scan, UE_scan_carrier, UE_no_timing_correction);
// Set FP variables
NR_DL_FRAME_PARMS *fp = &UE->frame_parms;
fp->nb_antennas_tx = nb_antenna_tx;
fp->nb_antennas_rx = nb_antenna_rx;
fp->threequarter_fs = threequarter_fs;
if (tddflag){
fp->frame_type = TDD;
LOG_I(PHY, "Set UE frame_type %d\n", fp->frame_type);
}
if (N_RB_DL){
fp->N_RB_DL = N_RB_DL;
LOG_I(PHY, "Set UE N_RB_DL %d\n", N_RB_DL);
}
LOG_I(PHY, "Set UE nb_rx_antenna %d, nb_tx_antenna %d, threequarter_fs %d\n", nb_antenna_rx, nb_antenna_tx, threequarter_fs);
}
void init_openair0(void) {
int card;
int freq_off = 0;
NR_DL_FRAME_PARMS *frame_parms = &PHY_vars_UE_g[0][0]->frame_parms;
for (card=0; card<MAX_CARDS; card++) {
uint64_t dl_carrier, ul_carrier;
openair0_cfg[card].configFilename = NULL;
openair0_cfg[card].threequarter_fs = frame_parms->threequarter_fs;
numerology = frame_parms->numerology_index;
if(frame_parms->N_RB_DL == 66) {
if (numerology==3) {
openair0_cfg[card].sample_rate=122.88e6;
openair0_cfg[card].samples_per_frame = 1228800;
} else {
LOG_E(PHY,"Unsupported numerology! FR2 supports only 120KHz SCS for now.\n");
exit(-1);
}
}else if(frame_parms->N_RB_DL == 32) {
if (numerology==3) {
openair0_cfg[card].sample_rate=61.44e6;
openair0_cfg[card].samples_per_frame = 614400;
} else {
LOG_E(PHY,"Unsupported numerology! FR2 supports only 120KHz SCS for now.\n");
exit(-1);
}
}else if(frame_parms->N_RB_DL == 217) {
if (numerology==1) {
if (frame_parms->threequarter_fs) {
openair0_cfg[card].sample_rate=92.16e6;
openair0_cfg[card].samples_per_frame = 921600;
}
else {
openair0_cfg[card].sample_rate=122.88e6;
openair0_cfg[card].samples_per_frame = 1228800;
}
} else {
LOG_E(PHY,"Unsupported numerology!\n");
exit(-1);
}
} else if(frame_parms->N_RB_DL == 273) {
if (numerology==1) {
if (frame_parms->threequarter_fs) {
AssertFatal(0 == 1,"three quarter sampling not supported for N_RB 273\n");
}
else {
openair0_cfg[card].sample_rate=122.88e6;
openair0_cfg[card].samples_per_frame = 1228800;
}
} else {
LOG_E(PHY,"Unsupported numerology!\n");
exit(-1);
}
} else if(frame_parms->N_RB_DL == 106) {
if (numerology==0) {
if (frame_parms->threequarter_fs) {
openair0_cfg[card].sample_rate=23.04e6;
openair0_cfg[card].samples_per_frame = 230400;
} else {
openair0_cfg[card].sample_rate=30.72e6;
openair0_cfg[card].samples_per_frame = 307200;
}
} else if (numerology==1) {
if (frame_parms->threequarter_fs) {
openair0_cfg[card].sample_rate=46.08e6;
openair0_cfg[card].samples_per_frame = 460800;
}
else {
openair0_cfg[card].sample_rate=61.44e6;
openair0_cfg[card].samples_per_frame = 614400;
}
} else if (numerology==2) {
openair0_cfg[card].sample_rate=122.88e6;
openair0_cfg[card].samples_per_frame = 1228800;
} else {
LOG_E(PHY,"Unsupported numerology!\n");
exit(-1);
}
} else if(frame_parms->N_RB_DL == 50) {
openair0_cfg[card].sample_rate=15.36e6;
openair0_cfg[card].samples_per_frame = 153600;
} else if (frame_parms->N_RB_DL == 25) {
openair0_cfg[card].sample_rate=7.68e6;
openair0_cfg[card].samples_per_frame = 76800;
} else if (frame_parms->N_RB_DL == 6) {
openair0_cfg[card].sample_rate=1.92e6;
openair0_cfg[card].samples_per_frame = 19200;
}
else {
LOG_E(PHY,"Unknown NB_RB %d!\n",frame_parms->N_RB_DL);
exit(-1);
}
if (frame_parms->frame_type==TDD)
openair0_cfg[card].duplex_mode = duplex_mode_TDD;
else
openair0_cfg[card].duplex_mode = duplex_mode_FDD;
openair0_cfg[card].Mod_id = 0;
openair0_cfg[card].num_rb_dl = frame_parms->N_RB_DL;
openair0_cfg[card].clock_source = get_softmodem_params()->clock_source;
openair0_cfg[card].time_source = get_softmodem_params()->timing_source;
openair0_cfg[card].tx_num_channels = min(2, frame_parms->nb_antennas_tx);
openair0_cfg[card].rx_num_channels = min(2, frame_parms->nb_antennas_rx);
LOG_I(PHY, "HW: Configuring card %d, tx/rx num_channels %d/%d, duplex_mode %s\n",
card,
openair0_cfg[card].tx_num_channels,
openair0_cfg[card].rx_num_channels,
duplex_mode[openair0_cfg[card].duplex_mode]);
nr_get_carrier_frequencies(frame_parms, &dl_carrier, &ul_carrier);
nr_rf_card_config(&openair0_cfg[card], rx_gain_off, ul_carrier, dl_carrier, freq_off);
openair0_cfg[card].configFilename = get_softmodem_params()->rf_config_file;
if (usrp_args) openair0_cfg[card].sdr_addrs = usrp_args;
}
}
void init_pdcp(void) {
uint32_t pdcp_initmask = (!IS_SOFTMODEM_NOS1) ? LINK_ENB_PDCP_TO_GTPV1U_BIT : (LINK_ENB_PDCP_TO_GTPV1U_BIT | PDCP_USE_NETLINK_BIT | LINK_ENB_PDCP_TO_IP_DRIVER_BIT);
/*if (IS_SOFTMODEM_BASICSIM || IS_SOFTMODEM_RFSIM || (nfapi_getmode()==NFAPI_UE_STUB_PNF)) {
pdcp_initmask = pdcp_initmask | UE_NAS_USE_TUN_BIT;
}*/
if (IS_SOFTMODEM_NOKRNMOD)
pdcp_initmask = pdcp_initmask | UE_NAS_USE_TUN_BIT;
/*if (rlc_module_init() != 0) {
LOG_I(RLC, "Problem at RLC initiation \n");
}
pdcp_layer_init();
nr_DRB_preconfiguration();*/
pdcp_module_init(pdcp_initmask);
pdcp_set_rlc_data_req_func((send_rlc_data_req_func_t) rlc_data_req);
pdcp_set_pdcp_data_ind_func((pdcp_data_ind_func_t) pdcp_data_ind);
LOG_I(PDCP, "Before getting out from init_pdcp() \n");
}
// Stupid function addition because UE itti messages queues definition is common with eNB
void *rrc_enb_process_msg(void *notUsed) {
return NULL;
}
int main( int argc, char **argv ) {
//uint8_t beta_ACK=0,beta_RI=0,beta_CQI=2;
PHY_VARS_NR_UE *UE[MAX_NUM_CCs];
start_background_system();
if ( load_configmodule(argc,argv,CONFIG_ENABLECMDLINEONLY) == NULL) {
exit_fun("[SOFTMODEM] Error, configuration module init failed\n");
}
set_softmodem_sighandler();
CONFIG_SETRTFLAG(CONFIG_NOEXITONHELP);
memset(openair0_cfg,0,sizeof(openair0_config_t)*MAX_CARDS);
memset(tx_max_power,0,sizeof(int)*MAX_NUM_CCs);
// initialize logging
logInit();
// get options and fill parameters from configuration file
get_options(); //Command-line options
get_common_options(SOFTMODEM_5GUE_BIT );
#if T_TRACER
T_Config_Init();
#endif
//randominit (0);
set_taus_seed (0);
tpool_t pool;
Tpool = &pool;
char params[]="-1,-1";
initTpool(params, Tpool, false);
#ifdef UE_DLSCH_PARALLELISATION
tpool_t pool_dl;
Tpool_dl = &pool_dl;
char params_dl[]="-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1";
initTpool(params_dl, Tpool_dl, false);
#endif
cpuf=get_cpu_freq_GHz();
itti_init(TASK_MAX, THREAD_MAX, MESSAGES_ID_MAX, tasks_info, messages_info);
init_opt() ;
load_nrLDPClib();
if (ouput_vcd) {
vcd_signal_dumper_init("/tmp/openair_dump_nrUE.vcd");
}
#ifndef PACKAGE_VERSION
# define PACKAGE_VERSION "UNKNOWN-EXPERIMENTAL"
#endif
LOG_I(HW, "Version: %s\n", PACKAGE_VERSION);
init_NR_UE(1,rrc_config_path);
if(IS_SOFTMODEM_NOS1)
init_pdcp();
NB_UE_INST=1;
NB_INST=1;
PHY_vars_UE_g = malloc(sizeof(PHY_VARS_NR_UE **));
PHY_vars_UE_g[0] = malloc(sizeof(PHY_VARS_NR_UE *)*MAX_NUM_CCs);
if (get_softmodem_params()->do_ra)
AssertFatal(get_softmodem_params()->phy_test == 0,"RA and phy_test are mutually exclusive\n");
if (get_softmodem_params()->sa)
AssertFatal(get_softmodem_params()->phy_test == 0,"Standalone mode and phy_test are mutually exclusive\n");
for (int CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
PHY_vars_UE_g[0][CC_id] = (PHY_VARS_NR_UE *)malloc(sizeof(PHY_VARS_NR_UE));
UE[CC_id] = PHY_vars_UE_g[0][CC_id];
memset(UE[CC_id],0,sizeof(PHY_VARS_NR_UE));
set_options(CC_id, UE[CC_id]);
NR_UE_MAC_INST_t *mac = get_mac_inst(0);
if(mac->if_module != NULL && mac->if_module->phy_config_request != NULL)
mac->if_module->phy_config_request(&mac->phy_config);
fapi_nr_config_request_t *nrUE_config = &UE[CC_id]->nrUE_config;
nr_init_frame_parms_ue(&UE[CC_id]->frame_parms, nrUE_config, *mac->scc->downlinkConfigCommon->frequencyInfoDL->frequencyBandList.list.array[0]);
init_symbol_rotation(&UE[CC_id]->frame_parms, UE[CC_id]->frame_parms.dl_CarrierFreq);
init_nr_ue_vars(UE[CC_id], 0, abstraction_flag);
#ifdef FR2_TEST
// Overwrite DL frequency (for FR2 testing)
if (downlink_frequency[0][0]!=0){
frame_parms[CC_id]->dl_CarrierFreq = downlink_frequency[0][0];
if (frame_parms[CC_id]->frame_type == TDD)
frame_parms[CC_id]->ul_CarrierFreq = downlink_frequency[0][0];
}
#endif
}
init_openair0();
// init UE_PF_PO and mutex lock
pthread_mutex_init(&ue_pf_po_mutex, NULL);
memset (&UE_PF_PO[0][0], 0, sizeof(UE_PF_PO_t)*NUMBER_OF_UE_MAX*MAX_NUM_CCs);
configure_linux();
mlockall(MCL_CURRENT | MCL_FUTURE);
if(IS_SOFTMODEM_DOFORMS) {
load_softscope("nr",PHY_vars_UE_g[0][0]);
}
init_NR_UE_threads(1);
printf("UE threads created by %ld\n", gettid());
// wait for end of program
printf("TYPE <CTRL-C> TO TERMINATE\n");
while(true)
sleep(3600);
if (ouput_vcd)
vcd_signal_dumper_close();
return 0;
}
Reference in New Issue View Git Blame Copy Permalink