This commit introduces the following changes to ImScope:
- Added the ability to record IQ data using the same mechanism as ImScope.
- Added a new executable target `imscope_iq_file_viewer` for viewing IQ files.
- Introduced a command line argument `--imscope-record` that enables data recording mode.
- Refactored a lot of the scope code
Usage:
- To record IQ data, run a modem with `--imscope-record` flag.
The recording happens whenever a modem calls dumpScopeData, which currently is
done only in gNB on PUSCH DTX and PUSCH CRC NOK.
There is a limit of ~1GB of files written by the thread in a signle run to avoid
accidentally exhausting disk space.
If a directory `imscope-dump` is available the data will be recorded there in .imscope
files. Otherwise files are written to the directory the modem was run. This is done so that
the directory can be mapped in a docker container.
- To view recorded IQ files, use the new executable `imscope_iq_file_viewer`. This can be done by running:
```
./imscope_iq_file_viewer <path_to_iq_file>
```
Replace `<path_to_iq_file>` with the path to the IQ file you want to view.
245 lines
8.1 KiB
C
245 lines
8.1 KiB
C
/*
|
|
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
|
|
* contributor license agreements. See the NOTICE file distributed with
|
|
* this work for additional information regarding copyright ownership.
|
|
* The OpenAirInterface Software Alliance licenses this file to You under
|
|
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
|
|
* except in compliance with the License.
|
|
* You may obtain a copy of the License at
|
|
*
|
|
* http://www.openairinterface.org/?page_id=698
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*-------------------------------------------------------------------------------
|
|
* For more information about the OpenAirInterface (OAI) Software Alliance:
|
|
* contact@openairinterface.org
|
|
*/
|
|
|
|
/*! \file softmodem-common.c
|
|
* \brief common code for 5G and LTE softmodem main xNB and UEs source (nr-softmodem.c, lte-softmodem.c...)
|
|
* \author Nokia BellLabs France, francois Taburet
|
|
* \date 2020
|
|
* \version 0.1
|
|
* \company Nokia BellLabs France
|
|
* \email: francois.taburet@nokia-bell-labs.com
|
|
* \note
|
|
* \warning
|
|
*/
|
|
#include <time.h>
|
|
#include <dlfcn.h>
|
|
#include <sys/resource.h>
|
|
#include "UTIL/OPT/opt.h"
|
|
#include "common/config/config_userapi.h"
|
|
#include "common/utils/load_module_shlib.h"
|
|
#include "common/utils/telnetsrv/telnetsrv.h"
|
|
#include "executables/thread-common.h"
|
|
#include "common/utils/LOG/log.h"
|
|
#include "softmodem-common.h"
|
|
#include "nfapi/oai_integration/vendor_ext.h"
|
|
|
|
char *parallel_config=NULL;
|
|
char *worker_config=NULL;
|
|
int usrp_tx_thread = 0;
|
|
uint8_t nfapi_mode=0;
|
|
|
|
static struct timespec start;
|
|
|
|
static softmodem_params_t softmodem_params;
|
|
softmodem_params_t *get_softmodem_params(void) {
|
|
return &softmodem_params;
|
|
}
|
|
|
|
char *get_softmodem_function(void)
|
|
{
|
|
optmask_t fmask = *get_softmodem_optmask();
|
|
if (fmask.bit.SOFTMODEM_ENB_BIT)
|
|
return "enb";
|
|
if (fmask.bit.SOFTMODEM_GNB_BIT)
|
|
return "gnb";
|
|
if (fmask.bit.SOFTMODEM_4GUE_BIT)
|
|
return "4Gue";
|
|
if (fmask.bit.SOFTMODEM_5GUE_BIT)
|
|
return "5Gue";
|
|
return "???";
|
|
}
|
|
|
|
void get_common_options(configmodule_interface_t *cfg)
|
|
{
|
|
int32_t stats_disabled = 0;
|
|
uint32_t online_log_messages=0;
|
|
uint32_t glog_level=0 ;
|
|
uint32_t start_telnetsrv = 0, start_telnetclt = 0;
|
|
uint32_t start_websrv = 0;
|
|
uint32_t noS1 = 0, nonbiot = 0;
|
|
uint32_t rfsim = 0, do_forms = 0;
|
|
uint32_t enable_imscope = 0;
|
|
uint32_t enable_imscope_record = 0;
|
|
int nfapi_index = 0;
|
|
char *logmem_filename = NULL;
|
|
|
|
paramdef_t cmdline_params[] = CMDLINE_PARAMS_DESC;
|
|
checkedparam_t cmdline_CheckParams[] = CMDLINE_PARAMS_CHECK_DESC;
|
|
static_assert(sizeofArray(cmdline_params) == sizeofArray(cmdline_CheckParams),
|
|
"cmdline_params and cmdline_CheckParams should have the same size");
|
|
int numparams = sizeofArray(cmdline_params);
|
|
config_set_checkfunctions(cmdline_params, cmdline_CheckParams, numparams);
|
|
config_get(cfg, cmdline_params, numparams, NULL);
|
|
nfapi_index = config_paramidx_fromname(cmdline_params, numparams, "nfapi");
|
|
AssertFatal(nfapi_index >= 0,"Index for nfapi config option not found!");
|
|
nfapi_mode = config_get_processedint(cfg, &cmdline_params[nfapi_index]);
|
|
|
|
paramdef_t cmdline_logparams[] =CMDLINE_LOGPARAMS_DESC ;
|
|
checkedparam_t cmdline_log_CheckParams[] = CMDLINE_LOGPARAMS_CHECK_DESC;
|
|
static_assert(sizeofArray(cmdline_logparams) == sizeofArray(cmdline_log_CheckParams),
|
|
"cmdline_logparams and cmdline_log_CheckParams should have the same size");
|
|
|
|
int numlogparams = sizeofArray(cmdline_logparams);
|
|
config_set_checkfunctions(cmdline_logparams, cmdline_log_CheckParams, numlogparams);
|
|
config_get(cfg, cmdline_logparams, numlogparams, NULL);
|
|
|
|
if(config_isparamset(cmdline_logparams,config_paramidx_fromname(cmdline_logparams,numparams, CONFIG_FLOG_OPT))) {
|
|
set_glog_onlinelog(online_log_messages);
|
|
}
|
|
|
|
if(config_isparamset(cmdline_logparams,config_paramidx_fromname(cmdline_logparams,numparams, CONFIG_LOGL_OPT))) {
|
|
set_glog(glog_level);
|
|
}
|
|
|
|
if (start_telnetsrv) {
|
|
load_module_shlib("telnetsrv",NULL,0,NULL);
|
|
}
|
|
|
|
if (start_telnetclt) {
|
|
IS_SOFTMODEM_TELNETCLT = true;
|
|
}
|
|
|
|
if (logmem_filename != NULL && strlen(logmem_filename) > 0) {
|
|
printf("Enabling OPT for log save at memory %s\n",logmem_filename);
|
|
logInit_log_mem(logmem_filename);
|
|
}
|
|
|
|
if (noS1) {
|
|
IS_SOFTMODEM_NOS1 = true;
|
|
}
|
|
|
|
if (nonbiot) {
|
|
IS_SOFTMODEM_NONBIOT = true;
|
|
}
|
|
|
|
if (rfsim) {
|
|
IS_SOFTMODEM_RFSIM = true;
|
|
}
|
|
|
|
if (do_forms) {
|
|
IS_SOFTMODEM_DOSCOPE = true;
|
|
}
|
|
|
|
if (enable_imscope) {
|
|
IS_SOFTMODEM_IMSCOPE_ENABLED = true;
|
|
}
|
|
|
|
if (enable_imscope_record) {
|
|
IS_SOFTMODEM_IMSCOPE_RECORD_ENABLED = true;
|
|
}
|
|
|
|
if (start_websrv) {
|
|
load_module_shlib("websrv", NULL, 0, NULL);
|
|
}
|
|
|
|
if(parallel_config != NULL) set_parallel_conf(parallel_config);
|
|
|
|
if(worker_config != NULL) set_worker_conf(worker_config);
|
|
nfapi_setmode(nfapi_mode);
|
|
if (stats_disabled)
|
|
IS_SOFTMODEM_NOSTATS = true;
|
|
}
|
|
|
|
void softmodem_verify_mode(const softmodem_params_t *p)
|
|
{
|
|
if (IS_SA_MODE(p)) {
|
|
LOG_I(UTIL, "running in SA mode (no --phy-test, --do-ra, --nsa option present)\n");
|
|
return;
|
|
}
|
|
|
|
if (p->phy_test)
|
|
LOG_I(UTIL, "running in phy-test mode (--phy-test)\n");
|
|
if (p->do_ra)
|
|
LOG_I(UTIL, "running in do-ra mode (--do-ra)\n");
|
|
if (p->nsa)
|
|
LOG_I(UTIL, "running in NSA mode (--nsa)\n");
|
|
int num_modes = p->phy_test + p->do_ra + p->nsa;
|
|
AssertFatal(num_modes == 1, "--phy-test, --do-ra, and --nsa are mutually exclusive\n");
|
|
}
|
|
|
|
void softmodem_printresources(int sig, telnet_printfunc_t pf) {
|
|
struct rusage usage;
|
|
struct timespec stop;
|
|
|
|
clock_gettime(CLOCK_BOOTTIME, &stop);
|
|
|
|
uint64_t elapse = (stop.tv_sec - start.tv_sec) ; // in seconds
|
|
|
|
|
|
int st = getrusage(RUSAGE_SELF,&usage);
|
|
if (!st) {
|
|
pf("\nRun time: %lluh %llus\n",(unsigned long long)elapse/3600,(unsigned long long)(elapse - (elapse/3600)));
|
|
pf("\tTime executing user inst.: %lds %ldus\n",(long)usage.ru_utime.tv_sec,(long)usage.ru_utime.tv_usec);
|
|
pf("\tTime executing system inst.: %lds %ldus\n",(long)usage.ru_stime.tv_sec,(long)usage.ru_stime.tv_usec);
|
|
pf("\tMax. Phy. memory usage: %ldkB\n",(long)usage.ru_maxrss);
|
|
pf("\tPage fault number (no io): %ld\n",(long)usage.ru_minflt);
|
|
pf("\tPage fault number (requiring io): %ld\n",(long)usage.ru_majflt);
|
|
pf("\tNumber of file system read: %ld\n",(long)usage.ru_inblock);
|
|
pf("\tNumber of filesystem write: %ld\n",(long)usage.ru_oublock);
|
|
pf("\tNumber of context switch (process origin, io...): %ld\n",(long)usage.ru_nvcsw);
|
|
pf("\tNumber of context switch (os origin, priority...): %ld\n",(long)usage.ru_nivcsw);
|
|
}
|
|
}
|
|
|
|
void signal_handler(int sig) {
|
|
//void *array[10];
|
|
//size_t size;
|
|
|
|
if (sig==SIGSEGV) {
|
|
// get void*'s for all entries on the stack
|
|
/* backtrace uses malloc, that is not good in signal handlers
|
|
* I let the code, because it would be nice to make it better
|
|
size = backtrace(array, 10);
|
|
// print out all the frames to stderr
|
|
fprintf(stderr, "Error: signal %d:\n", sig);
|
|
backtrace_symbols_fd(array, size, 2);
|
|
*/
|
|
exit(-1);
|
|
} else {
|
|
if(sig==SIGINT ||sig==SOFTMODEM_RTSIGNAL)
|
|
softmodem_printresources(sig,(telnet_printfunc_t)printf);
|
|
if (sig != SOFTMODEM_RTSIGNAL) {
|
|
printf("Linux signal %s...\n",strsignal(sig));
|
|
exit_function(__FILE__, __FUNCTION__, __LINE__, "softmodem starting exit procedure\n", OAI_EXIT_NORMAL);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
|
|
void set_softmodem_sighandler(void) {
|
|
struct sigaction act,oldact;
|
|
clock_gettime(CLOCK_BOOTTIME, &start);
|
|
memset(&act,0,sizeof(act));
|
|
act.sa_handler=signal_handler;
|
|
sigaction(SOFTMODEM_RTSIGNAL,&act,&oldact);
|
|
// Disabled in order generate a core dump for analysis with gdb
|
|
// Enable for clean exit on CTRL-C (i.e. record player, USRP...)
|
|
signal(SIGINT, signal_handler);
|
|
# if 0
|
|
printf("Send signal %d to display resource usage...\n",SIGRTMIN+1);
|
|
signal(SIGSEGV, signal_handler);
|
|
signal(SIGTERM, signal_handler);
|
|
signal(SIGABRT, signal_handler);
|
|
#endif
|
|
}
|
|
|