maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
166235fd0948b094e78ef720ed71efed1ecb74bb
openairinterface5g/targets/RTAI/USER/synctest.c
T
Florian Kaltenberger 027aba404f replaced type definitions 
git-svn-id: http://svn.eurecom.fr/openair4G/trunk@5176 818b1a75-f10b-46b9-bf7c-635c3b92a50f
2014-03-17 18:13:01 +00:00

1286 lines
39 KiB
C
Raw Blame History

/*******************************************************************************
Eurecom OpenAirInterface
Copyright(c) 1999 - 2011 Eurecom
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
version 2, as published by the Free Software Foundation.
This program is distributed in the hope it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
Contact Information
Openair Admin: openair_admin@eurecom.fr
Openair Tech : openair_tech@eurecom.fr
Forums : http://forums.eurecom.fsr/openairinterface
Address : Eurecom, 2229, route des crêtes, 06560 Valbonne Sophia Antipolis, France
*******************************************************************************/
/*! \file lte-softmodem.c
* \brief main program to control HW and scheduling
* \author R. Knopp, F. Kaltenberger
* \date 2012
* \version 0.1
* \company Eurecom
* \email: knopp@eurecom.fr,florian.kaltenberger@eurecom.fr
* \note
* \warning
*/
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sched.h>
#include <signal.h>
#include <execinfo.h>
#include <getopt.h>
#include "rt_wrapper.h"
#include "PHY/types.h"
//#include "PHY/defs.h"
#include "openair0_lib.h"
#include "UTIL/LOG/log.h"
#include "UTIL/LOG/vcd_signal_dumper.h"
#if defined(ENABLE_ITTI)
# include "intertask_interface_init.h"
# include "timer.h"
# if defined(ENABLE_USE_MME)
# include "s1ap_eNB.h"
# include "sctp_eNB_task.h"
# endif
#endif
#ifdef XFORMS
#include "PHY/TOOLS/lte_phy_scope.h"
#include "stats.h"
// current status is that every UE has a DL scope for a SINGLE eNB (eNB_id=0)
// at eNB 0, an UL scope for every UE
FD_lte_phy_scope_ue *form_ue[NUMBER_OF_UE_MAX];
FD_lte_phy_scope_enb *form_enb[NUMBER_OF_UE_MAX];
FD_stats_form *form_stats=NULL;
char title[255];
unsigned char scope_enb_num_ue = 1;
#endif //XFORMS
#ifdef EMOS
#include <gps.h>
#include <rtai_fifos.h>
//#define CHANSOUNDER_FIFO_SIZE 10485760 // 10 Mbytes FIFO
#define CHANSOUNDER_FIFO_SIZE 20971520 // 20 Mbytes FIFO
#define CHANSOUNDER_FIFO_MINOR 4 // minor of the FIFO device - this is /dev/rtf3
#define CHANSOUNDER_FIFO_DEV "/dev/rtf4"
#endif
#define TIMER_ONESHOT_MODE
#define FRAME_PERIOD 100000000ULL
#define DAQ_PERIOD 66667ULL
#define LTE_SLOTS_PER_FRAME 20
#define RESAMPLING_FACTOR 2
#define SAMPLES_PER_SLOT (15360/(1<<RESAMPLING_FACTOR))
#undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all
#ifdef RTAI
static SEM *mutex;
//static CND *cond;
static long int thread0;
static long int thread1;
//static long int sync_thread;
#else
#define OPENAIR_THREAD_STACK_SIZE 8192
#define OPENAIR_THREAD_PRIORITY 255
pthread_t thread0;
//pthread_t thread1;
pthread_attr_t attr_dlsch_threads;
struct sched_param sched_param_dlsch;
#endif
pthread_t thread2; //xforms
pthread_t thread3; //emos
/*
static int instance_cnt=-1; //0 means worker is busy, -1 means its free
int instance_cnt_ptr_kern,*instance_cnt_ptr_user;
int pci_interface_ptr_kern;
*/
//extern unsigned int bigphys_top;
//extern unsigned int mem_base;
int card = 0;
exmimo_config_t *p_exmimo_config;
exmimo_id_t *p_exmimo_id;
volatile unsigned int *DAQ_MBOX;
int oai_exit = 0;
//int time_offset[4] = {-138,-138,-138,-138};
//int time_offset[4] = {-145,-145,-145,-145};
int time_offset[4] = {0,0,0,0};
int fs4_test=0;
char UE_flag=0;
uint8_t eNB_id=0,UE_id=0;
uint32_t carrier_freq[4]= {1907600000,1907600000,1907600000,1907600000};
struct timing_info_t {
//unsigned int frame, hw_slot, last_slot, next_slot;
RTIME time_min, time_max, time_avg, time_last, time_now;
//unsigned int mbox0, mbox1, mbox2, mbox_target;
unsigned int n_samples;
} timing_info;
extern int16_t* sync_corr_ue0;
extern int16_t prach_ifft[4][1024*2];
int rx_input_level_dBm;
#ifdef XFORMS
extern int otg_enabled;
#else
int otg_enabled;
#endif
int number_of_cards = 1;
int mbox_bounds[20] = {8,16,24,30,38,46,54,60,68,76,84,90,98,106,114,120,128,136,144, 0}; ///boundaries of slots in terms ob mbox counter rounded up to even numbers
//int mbox_bounds[20] = {6,14,22,28,36,44,52,58,66,74,82,88,96,104,112,118,126,134,142, 148}; ///boundaries of slots in terms ob mbox counter rounded up to even numbers
int init_dlsch_threads(void);
void cleanup_dlsch_threads(void);
int32_t init_rx_pdsch_thread(void);
void cleanup_rx_pdsch_thread(void);
int init_ulsch_threads(void);
void cleanup_ulsch_threads(void);
//void setup_ue_buffers(PHY_VARS_UE *phy_vars_ue, LTE_DL_FRAME_PARMS *frame_parms, int carrier);
//void setup_eNB_buffers(PHY_VARS_eNB *phy_vars_eNB, LTE_DL_FRAME_PARMS *frame_parms, int carrier);
void test_config(int card, int ant, unsigned int rf_mode, int UE_flag);
unsigned int build_rflocal(int txi, int txq, int rxi, int rxq)
{
return (txi + (txq<<6) + (rxi<<12) + (rxq<<18));
}
unsigned int build_rfdc(int dcoff_i_rxfe, int dcoff_q_rxfe)
{
return (dcoff_i_rxfe + (dcoff_q_rxfe<<8));
}
void signal_handler(int sig)
{
void *array[10];
size_t size;
if (sig==SIGSEGV) {
// get void*'s for all entries on the stack
size = backtrace(array, 10);
// print out all the frames to stderr
fprintf(stderr, "Error: signal %d:\n", sig);
backtrace_symbols_fd(array, size, 2);
exit(-1);
}
else {
oai_exit=1;
}
}
void exit_fun(const char* s)
{
void *array[10];
size_t size;
printf("Exiting: %s\n",s);
oai_exit=1;
//rt_sleep_ns(FRAME_PERIOD);
//exit (-1);
}
#ifdef XFORMS
void *scope_thread(void *arg) {
int16_t prach_corr[1024], i;
char stats_buffer[16384];
//FILE *UE_stats, *eNB_stats;
int len=0;
struct sched_param sched_param;
sched_param.sched_priority = sched_get_priority_min(SCHED_FIFO)+1;
sched_setscheduler(0, SCHED_FIFO,&sched_param);
printf("Scope thread has priority %d\n",sched_param.sched_priority);
/*
if (UE_flag==1)
UE_stats = fopen("UE_stats.txt", "w");
else
eNB_stats = fopen("eNB_stats.txt", "w");
*/
while (!oai_exit) {
if (UE_flag==1) {
len = dump_ue_stats (PHY_vars_UE_g[0], stats_buffer, 0, mode,rx_input_level_dBm);
fl_set_object_label(form_stats->stats_text, stats_buffer);
//rewind (UE_stats);
//fwrite (stats_buffer, 1, len, UE_stats);
phy_scope_UE(form_ue[UE_id],
PHY_vars_UE_g[UE_id],
eNB_id,
UE_id,7);
} else {
len = dump_eNB_stats (PHY_vars_eNB_g[0], stats_buffer, 0);
fl_set_object_label(form_stats->stats_text, stats_buffer);
//rewind (eNB_stats);
//fwrite (stats_buffer, 1, len, eNB_stats);
for(UE_id=0;UE_id<scope_enb_num_ue;UE_id++) {
phy_scope_eNB(form_enb[UE_id],
PHY_vars_eNB_g[eNB_id],
UE_id);
}
}
//printf("doing forms\n");
usleep(100000);
}
//fclose (UE_stats);
//fclose (eNB_stats);
pthread_exit((void*)arg);
}
#endif
int dummy_tx_buffer[3840*4] __attribute__((aligned(16)));
#ifdef EMOS
#define NO_ESTIMATES_DISK 20 //No. of estimates that are aquired before dumped to disk
int channel_buffer_size = SAMPLES_PER_SLOT*4; //one slot, 4 byte per sample
void *emos_thread (void *arg)
{
char c;
char *fifo2file_buffer, *fifo2file_ptr;
int fifo, counter=0, bytes;
long long unsigned int total_bytes=0;
FILE *dumpfile_id;
char dumpfile_name[1024];
time_t starttime_tmp;
struct tm starttime;
time_t timer;
struct tm *now;
struct gps_data_t *gps_data = NULL;
struct gps_fix_t dummy_gps_data;
struct sched_param sched_param;
int ret;
sched_param.sched_priority = sched_get_priority_max(SCHED_FIFO)-1;
sched_setscheduler(0, SCHED_FIFO,&sched_param);
printf("EMOS thread has priority %d\n",sched_param.sched_priority);
timer = time(NULL);
now = localtime(&timer);
memset(&dummy_gps_data,1,sizeof(struct gps_fix_t));
#if GPSD_API_MAJOR_VERSION>=5
ret = gps_open("127.0.0.1","2947",gps_data);
if (ret!=0)
#else
gps_data = gps_open("127.0.0.1","2947");
if (gps_data == NULL)
#endif
{
printf("[EMOS] Could not open GPS\n");
//exit(-1);
}
#if GPSD_API_MAJOR_VERSION>=4
else if (gps_stream(gps_data, WATCH_ENABLE,NULL) != 0)
#else
else if (gps_query(gps_data, "w+x") != 0)
#endif
{
//sprintf(tmptxt,"Error sending command to GPS, gps_data = %x", gps_data);
printf("[EMOS] Error sending command to GPS\n");
//exit(-1);
}
else
printf("[EMOS] Opened GPS, gps_data=%p\n", gps_data);
/*
if (UE_flag==0)
channel_buffer_size = sizeof(fifo_dump_emos_eNB);
else
channel_buffer_size = sizeof(fifo_dump_emos_UE);
*/
// allocate memory for NO_FRAMES_DISK channes estimations
fifo2file_buffer = malloc(NO_ESTIMATES_DISK*channel_buffer_size);
fifo2file_ptr = fifo2file_buffer;
if (fifo2file_buffer == NULL)
{
printf("[EMOS] Cound not allocate memory for fifo2file_buffer\n");
exit(EXIT_FAILURE);
}
if ((fifo = open(CHANSOUNDER_FIFO_DEV, O_RDONLY)) < 0)
{
fprintf(stderr, "[EMOS] Error opening the fifo\n");
exit(EXIT_FAILURE);
}
time(&starttime_tmp);
localtime_r(&starttime_tmp,&starttime);
snprintf(dumpfile_name,1024,"/tmp/%s_data_%d%02d%02d_%02d%02d%02d.EMOS",
(UE_flag==0) ? "eNB" : "UE",
1900+starttime.tm_year, starttime.tm_mon+1, starttime.tm_mday, starttime.tm_hour, starttime.tm_min, starttime.tm_sec);
dumpfile_id = fopen(dumpfile_name,"w");
if (dumpfile_id == NULL)
{
fprintf(stderr, "[EMOS] Error opening dumpfile %s\n",dumpfile_name);
exit(EXIT_FAILURE);
}
printf("[EMOS] starting dump, channel_buffer_size=%d ...\n",channel_buffer_size);
while (!oai_exit)
{
bytes = rtf_read_timed(fifo, fifo2file_ptr, channel_buffer_size,100);
if (bytes<=0)
continue;
/*
if (UE_flag==0)
printf("eNB: count %d, frame %d, read: %d bytes from the fifo\n",counter, ((fifo_dump_emos_eNB*)fifo2file_ptr)->frame_tx,bytes);
else
printf("UE: count %d, frame %d, read: %d bytes from the fifo\n",counter, ((fifo_dump_emos_UE*)fifo2file_ptr)->frame_rx,bytes);
*/
fifo2file_ptr += channel_buffer_size;
counter ++;
total_bytes += bytes;
if ((counter%NO_ESTIMATES_DISK)==0)
{
//reset stuff
fifo2file_ptr = fifo2file_buffer;
//counter = 0;
//flush buffer to disk
if (fwrite(fifo2file_buffer, sizeof(char), NO_ESTIMATES_DISK*channel_buffer_size, dumpfile_id) != NO_ESTIMATES_DISK*channel_buffer_size)
{
fprintf(stderr, "[EMOS] Error writing to dumpfile\n");
exit(EXIT_FAILURE);
}
/*
if (gps_data)
{
if (gps_poll(gps_data) != 0) {
printf("[EMOS] problem polling data from gps\n");
}
else {
printf("[EMOS] lat %g, lon %g\n",gps_data->fix.latitude,gps_data->fix.longitude);
}
if (fwrite(&(gps_data->fix), sizeof(char), sizeof(struct gps_fix_t), dumpfile_id) != sizeof(struct gps_fix_t))
{
printf("[EMOS] Error writing to dumpfile, stopping recording\n");
exit(EXIT_FAILURE);
}
}
else
{
printf("[EMOS] WARNING: No GPS data available, storing dummy packet\n");
if (fwrite(&(dummy_gps_data), sizeof(char), sizeof(struct gps_fix_t), dumpfile_id) != sizeof(struct gps_fix_t))
{
printf("[EMOS] Error writing to dumpfile, stopping recording\n");
exit(EXIT_FAILURE);
}
}
*/
}
if ((counter%2000)==0)
printf("[EMOS] count %d (%d sec), total bytes wrote %llu\n", counter, counter/2000, total_bytes);
}
free(fifo2file_buffer);
fclose(dumpfile_id);
close(fifo);
pthread_exit((void*) arg);
}
#endif
/* This is the main eNB thread. It gets woken up by the kernel driver using the RTAI message mechanism (rt_send and rt_receive). */
static void *eNB_thread(void *arg)
{
#ifdef RTAI
RT_TASK *task;
RTIME now;
#endif
unsigned char slot=0,last_slot, next_slot;
int hw_slot,frame=0;
unsigned int msg1;
unsigned int aa,slot_offset, slot_offset_F;
int diff;
int delay_cnt;
RTIME time_in, time_diff;
int mbox_target=0,mbox_current=0;
int i,ret;
int tx_offset;
int bytes;
#ifdef RTAI
task = rt_task_init_schmod(nam2num("TASK0"), 0, 0, 0, SCHED_FIFO, 0xF);
LOG_D(HW,"Started eNB thread (id %p)\n",task);
#ifndef TIMER_ONESHOT_MODE
now = rt_get_time();
ret = rt_task_make_periodic(task, now, nano2count(500000LL));
if (ret!=0)
LOG_E(HW,"Problem with periodic timer\n");
#endif
#endif
#ifdef HARD_RT
rt_make_hard_real_time();
#endif
mlockall(MCL_CURRENT | MCL_FUTURE);
timing_info.time_min = 100000000ULL;
timing_info.time_max = 0;
timing_info.time_avg = 0;
timing_info.n_samples = 0;
while (!oai_exit)
{
hw_slot = (((((volatile unsigned int *)DAQ_MBOX)[0]+1)%150)<<1)/15;
//LOG_D(HW,"eNB frame %d, time %llu: slot %d, hw_slot %d (mbox %d)\n",frame,rt_get_time_ns(),slot,hw_slot,((unsigned int *)DAQ_MBOX)[0]);
//this is the mbox counter where we should be
//mbox_target = ((((slot+1)%20)*15+1)>>1)%150;
mbox_target = mbox_bounds[slot];
//this is the mbox counter where we are
mbox_current = ((volatile unsigned int *)DAQ_MBOX)[0];
//this is the time we need to sleep in order to synchronize with the hw (in multiples of DAQ_PERIOD)
if ((mbox_current>=135) && (mbox_target<15)) //handle the frame wrap-arround
diff = 150-mbox_current+mbox_target;
else if ((mbox_current<15) && (mbox_target>=135))
diff = -150+mbox_target-mbox_current;
else
diff = mbox_target - mbox_current;
vcd_signal_dumper_dump_variable_by_name(VCD_SIGNAL_DUMPER_VARIABLES_SLOT_NUMBER_ENB, slot);
vcd_signal_dumper_dump_variable_by_name(VCD_SIGNAL_DUMPER_VARIABLES_FRAME_NUMBER_ENB, frame);
vcd_signal_dumper_dump_variable_by_name(VCD_SIGNAL_DUMPER_VARIABLES_DAQ_MBOX, *((volatile unsigned int *) openair0_exmimo_pci[card].rxcnt_ptr[0]));
vcd_signal_dumper_dump_variable_by_name(VCD_SIGNAL_DUMPER_VARIABLES_DIFF, diff);
time_in = rt_get_time_ns();
//LOG_D(HW,"eNB Frame %d delaycnt %d : hw_slot %d (%d), slot %d, (slot+1)*15=%d, diff %d, time %llu\n",frame,delay_cnt,hw_slot,((unsigned int *)DAQ_MBOX)[0],slot,(((slot+1)*15)>>1),diff,time_in);
//LOG_D(HW,"eNB Frame %d, time %llu: sleeping for %llu (slot %d, hw_slot %d, diff %d, mbox %d, delay_cnt %d)\n", frame, time_in, diff*DAQ_PERIOD,slot,hw_slot,diff,((volatile unsigned int *)DAQ_MBOX)[0],delay_cnt);
vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_RT_SLEEP,1);
#ifdef TIMER_ONESHOT_MODE
//ret = rt_sleep_ns(DAQ_PERIOD * (slot%4==0?6:8));
ret = rt_sleep_ns(500000);
if (ret)
LOG_D(HW,"eNB Frame %d, time %llu: rt_sleep_ns returned %d\n",frame, time_in);
#else
rt_task_wait_period();
#endif
vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_RT_SLEEP,0);
//hw_slot = (((((volatile unsigned int *)DAQ_MBOX)[0]+1)%150)<<1)/15;
//LOG_D(HW,"eNB Frame %d : hw_slot %d, time %llu\n",frame,hw_slot,rt_get_time_ns());
mbox_current = ((volatile unsigned int *)DAQ_MBOX)[0];
if ((mbox_current>=135) && (mbox_target<15)) //handle the frame wrap-arround
diff = 150-mbox_current+mbox_target;
else if ((mbox_current<15) && (mbox_target>=135))
diff = -150+mbox_target-mbox_current;
else
diff = mbox_target - mbox_current;
last_slot = (slot)%LTE_SLOTS_PER_FRAME;
if (last_slot <0)
last_slot+=20;
next_slot = (slot+3)%LTE_SLOTS_PER_FRAME;
slot++;
if (slot==20) {
slot=0;
frame++;
}
if (frame==1000)
oai_exit=1;
#if defined(ENABLE_ITTI)
itti_update_lte_time(frame, slot);
#endif
}
LOG_D(HW,"eNB_thread: finished, ran %d times.\n",frame);
#ifdef HARD_RT
rt_make_soft_real_time();
#endif
// clean task
#ifdef RTAI
rt_task_delete(task);
#endif
LOG_D(HW,"Task deleted. returning\n");
return 0;
}
int main(int argc, char **argv) {
#ifdef RTAI
RT_TASK *task;
RTIME period;
#endif
int i,j,aa;
void *status;
/*
uint32_t rf_mode_max[4] = {55759,55759,55759,55759};
uint32_t rf_mode_med[4] = {39375,39375,39375,39375};
uint32_t rf_mode_byp[4] = {22991,22991,22991,22991};
*/
uint32_t my_rf_mode = RXEN + TXEN + TXLPFNORM + TXLPFEN + TXLPF25 + RXLPFNORM + RXLPFEN + RXLPF25 + LNA1ON +LNAMax + RFBBNORM + DMAMODE_RX + DMAMODE_TX;
uint32_t rf_mode_base = TXLPFNORM + TXLPFEN + TXLPF25 + RXLPFNORM + RXLPFEN + RXLPF25 + LNA1ON +LNAMax + RFBBNORM;
uint32_t rf_mode[4] = {my_rf_mode,0,0,0};
uint32_t rf_local[4] = {8255000,8255000,8255000,8255000}; // UE zepto
//{8254617, 8254617, 8254617, 8254617}; //eNB khalifa
//{8255067,8254810,8257340,8257340}; // eNB PETRONAS
uint32_t rf_vcocal[4] = {910,910,910,910};
uint32_t rf_vcocal_850[4] = {2015, 2015, 2015, 2015};
uint32_t rf_rxdc[4] = {32896,32896,32896,32896};
uint32_t rxgain[4] = {20,20,20,20};
uint32_t txgain[4] = {20,20,20,20};
uint16_t Nid_cell = 0;
uint8_t cooperation_flag=0, transmission_mode=1, abstraction_flag=0;
uint8_t beta_ACK=0,beta_RI=0,beta_CQI=2;
int c;
char do_forms=0;
unsigned int fd;
unsigned int tcxo = 114;
int amp;
uint8_t prach_fmt;
int N_ZC;
char rxg_fname[100];
char txg_fname[100];
char rflo_fname[100];
char rfdc_fname[100];
FILE *rxg_fd=NULL;
FILE *txg_fd=NULL;
FILE *rflo_fd=NULL;
FILE *rfdc_fd=NULL;
unsigned int rxg_max[4]={133,133,133,133}, rxg_med[4]={127,127,127,127}, rxg_byp[4]={120,120,120,120};
int tx_max_power=0;
char line[1000];
int l;
int ret, ant;
int ant_offset=0;
int error_code;
char *itti_dump_file = NULL;
const struct option long_options[] = {
{"calib-ue-rx", required_argument, NULL, 256},
{"calib-ue-rx-med", required_argument, NULL, 257},
{"calib-ue-rx-byp", required_argument, NULL, 258},
{"debug-ue-prach", no_argument, NULL, 259},
{"no-L2-connect", no_argument, NULL, 260},
{NULL, 0, NULL, 0}};
//mode = normal_txrx;
while ((c = getopt_long (argc, argv, "C:K:O:ST:UdF:V",long_options,NULL)) != -1)
{
switch (c)
{
case 'V':
ouput_vcd = 1;
break;
case 'd':
do_forms=1;
break;
case 'U':
UE_flag = 1;
break;
case 'C':
carrier_freq[0] = atoi(optarg);
carrier_freq[1] = atoi(optarg);
carrier_freq[2] = atoi(optarg);
carrier_freq[3] = atoi(optarg);
break;
case 'S':
fs4_test=1;
break;
case 'T':
tcxo=atoi(optarg);
break;
case 'K':
#if defined(ENABLE_ITTI)
itti_dump_file = strdup(optarg);
#else
printf("-K option is disabled when ENABLE_ITTI is not defined\n");
#endif
break;
case 'O':
#if defined(ENABLE_USE_MME)
EPC_MODE_ENABLED = 1;
if (optarg == NULL) /* No IP address provided: use localhost */
{
memcpy(&EPC_MODE_MME_ADDRESS[0], "127.0.0.1", 10);
} else {
uint8_t ip_length = strlen(optarg) + 1;
memcpy(&EPC_MODE_MME_ADDRESS[0], optarg,
ip_length > 16 ? 16 : ip_length);
}
#else
printf("You enabled mme mode without s1ap compiled...\n");
#endif
break;
case 'F':
sprintf(rxg_fname,"%srxg.lime",optarg);
rxg_fd = fopen(rxg_fname,"r");
if (rxg_fd) {
printf("Loading RX Gain parameters from %s\n",rxg_fname);
l=0;
while (fgets(line, sizeof(line), rxg_fd)) {
if ((strlen(line)==0) || (*line == '#')) continue; //ignore empty or comment lines
else {
if (l==0) sscanf(line,"%d %d %d %d",&rxg_max[0],&rxg_max[1],&rxg_max[2],&rxg_max[3]);
if (l==1) sscanf(line,"%d %d %d %d",&rxg_med[0],&rxg_med[1],&rxg_med[2],&rxg_med[3]);
if (l==2) sscanf(line,"%d %d %d %d",&rxg_byp[0],&rxg_byp[1],&rxg_byp[2],&rxg_byp[3]);
l++;
}
}
}
else
printf("%s not found, running with defaults\n",rxg_fname);
sprintf(txg_fname,"%stxg.lime",optarg);
txg_fd = fopen(txg_fname,"r");
if (txg_fd) {
printf("Loading TX Gain parameters from %s\n",txg_fname);
l=0;
while (fgets(line, sizeof(line), txg_fd)) {
if ((strlen(line)==0) || (*line == '#')) {
continue; //ignore empty or comment lines
}
else {
if (l==0) sscanf(line,"%d %d %d %d",&txgain[0],&txgain[1],&txgain[2],&txgain[3]);
if (l==1) sscanf(line,"%d",&tx_max_power);
l++;
}
}
}
else
printf("%s not found, running with defaults\n",txg_fname);
sprintf(rflo_fname,"%srflo.lime",optarg);
rflo_fd = fopen(rflo_fname,"r");
if (rflo_fd) {
printf("Loading RF LO parameters from %s\n",rflo_fname);
fscanf(rflo_fd,"%d %d %d %d",&rf_local[0],&rf_local[1],&rf_local[2],&rf_local[3]);
}
else
printf("%s not found, running with defaults\n",rflo_fname);
sprintf(rfdc_fname,"%srfdc.lime",optarg);
rfdc_fd = fopen(rfdc_fname,"r");
if (rfdc_fd) {
printf("Loading RF DC parameters from %s\n",rfdc_fname);
fscanf(rfdc_fd,"%d %d %d %d",&rf_rxdc[0],&rf_rxdc[1],&rf_rxdc[2],&rf_rxdc[3]);
}
else
printf("%s not found, running with defaults\n",rfdc_fname);
break;
/*
case 256:
mode = rx_calib_ue;
rx_input_level_dBm = atoi(optarg);
printf("Running with UE calibration on (LNA max), input level %d dBm\n",rx_input_level_dBm);
break;
case 257:
mode = rx_calib_ue_med;
rx_input_level_dBm = atoi(optarg);
printf("Running with UE calibration on (LNA med), input level %d dBm\n",rx_input_level_dBm);
break;
case 258:
mode = rx_calib_ue_byp;
rx_input_level_dBm = atoi(optarg);
printf("Running with UE calibration on (LNA byp), input level %d dBm\n",rx_input_level_dBm);
break;
case 259:
mode = debug_prach;
break;
case 260:
mode = no_L2_connect;
break;
*/
default:
break;
}
}
if (UE_flag==1)
printf("configuring for UE\n");
else
printf("configuring for eNB\n");
//randominit (0);
//set_taus_seed (0);
// initialize the log (see log.h for details)
logInit();
#if defined(ENABLE_ITTI)
itti_init(TASK_MAX, THREAD_MAX, MESSAGES_ID_MAX, tasks_info, messages_info, messages_definition_xml, itti_dump_file);
# if defined(ENABLE_USE_MME)
if (itti_create_task(TASK_SCTP, sctp_eNB_task, NULL) < 0) {
LOG_E(EMU, "Create task failed");
LOG_D(EMU, "Initializing SCTP task interface: FAILED\n");
return -1;
}
if (itti_create_task(TASK_S1AP, s1ap_eNB_task, NULL) < 0) {
LOG_E(EMU, "Create task failed");
LOG_D(EMU, "Initializing S1AP task interface: FAILED\n");
return -1;
}
# endif
if (itti_create_task(TASK_L2L1, l2l1_task, NULL) < 0) {
LOG_E(EMU, "Create task failed");
LOG_D(EMU, "Initializing L2L1 task interface: FAILED\n");
return -1;
}
// Handle signals until all tasks are terminated
// itti_wait_tasks_end();
#endif
if (ouput_vcd) {
if (UE_flag==1)
vcd_signal_dumper_init("/tmp/openair_dump_UE.vcd");
else
vcd_signal_dumper_init("/tmp/openair_dump_eNB.vcd");
}
#ifdef NAS_NETLINK
netlink_init();
#endif
// to make a graceful exit when ctrl-c is pressed
signal(SIGSEGV, signal_handler);
signal(SIGINT, signal_handler);
#ifndef RTAI
check_clock();
#endif
g_log->log_component[HW].level = LOG_DEBUG;
g_log->log_component[HW].flag = LOG_HIGH;
#ifdef OPENAIR2
g_log->log_component[PHY].level = LOG_INFO;
#else
g_log->log_component[PHY].level = LOG_INFO;
#endif
g_log->log_component[PHY].flag = LOG_HIGH;
g_log->log_component[MAC].level = LOG_INFO;
g_log->log_component[MAC].flag = LOG_HIGH;
g_log->log_component[RLC].level = LOG_INFO;
g_log->log_component[RLC].flag = LOG_HIGH;
g_log->log_component[PDCP].level = LOG_INFO;
g_log->log_component[PDCP].flag = LOG_HIGH;
g_log->log_component[OTG].level = LOG_INFO;
g_log->log_component[OTG].flag = LOG_HIGH;
g_log->log_component[RRC].level = LOG_INFO;
g_log->log_component[RRC].flag = LOG_HIGH;
// Initialize card
ret = openair0_open();
if ( ret != 0 ) {
if (ret == -1)
printf("Error opening /dev/openair0");
if (ret == -2)
printf("Error mapping bigshm");
if (ret == -3)
printf("Error mapping RX or TX buffer");
return(ret);
}
printf ("Detected %d number of cards, %d number of antennas.\n", openair0_num_detected_cards, openair0_num_antennas[card]);
p_exmimo_config = openair0_exmimo_pci[card].exmimo_config_ptr;
p_exmimo_id = openair0_exmimo_pci[card].exmimo_id_ptr;
printf("Card %d: ExpressMIMO %d, HW Rev %d, SW Rev 0x%d\n", card, p_exmimo_id->board_exmimoversion, p_exmimo_id->board_hwrev, p_exmimo_id->board_swrev);
if (p_exmimo_id->board_swrev>=BOARD_SWREV_CNTL2)
p_exmimo_config->framing.eNB_flag = 0;
else
p_exmimo_config->framing.eNB_flag = !UE_flag;
p_exmimo_config->framing.tdd_config = DUPLEXMODE_FDD + TXRXSWITCH_LSB;
for (ant=0; ant<4; ant++)
p_exmimo_config->framing.resampling_factor[ant] = RESAMPLING_FACTOR;
/*
for (ant=0;ant<max(frame_parms->nb_antennas_tx,frame_parms->nb_antennas_rx);ant++)
p_exmimo_config->rf.rf_mode[ant] = rf_mode_base;
for (ant=0;ant<frame_parms->nb_antennas_tx;ant++)
p_exmimo_config->rf.rf_mode[ant] += (TXEN + DMAMODE_TX);
for (ant=0;ant<frame_parms->nb_antennas_rx;ant++)
p_exmimo_config->rf.rf_mode[ant] += (RXEN + DMAMODE_RX);
for (ant=max(frame_parms->nb_antennas_tx,frame_parms->nb_antennas_rx);ant<4;ant++) {
p_exmimo_config->rf.rf_mode[ant] = 0;
carrier_freq[ant] = 0; //this turns off all other LIMEs
}
*/
ant_offset = 0;
for (ant=0; ant<4; ant++) {
if (ant==ant_offset) {
//if (1) {
p_exmimo_config->rf.rf_mode[ant] = rf_mode_base;
//p_exmimo_config->rf.rf_mode[ant] += (TXEN + DMAMODE_TX);
p_exmimo_config->rf.rf_mode[ant] += (RXEN + DMAMODE_RX);
}
else {
p_exmimo_config->rf.rf_mode[ant] = 0;
carrier_freq[ant] = 0; //this turns off all other LIMEs
}
}
for (ant = 0; ant<4; ant++) {
p_exmimo_config->rf.do_autocal[ant] = 1;
p_exmimo_config->rf.rf_freq_rx[ant] = carrier_freq[ant];
p_exmimo_config->rf.rf_freq_tx[ant] = carrier_freq[ant];
p_exmimo_config->rf.rx_gain[ant][0] = rxgain[ant];
p_exmimo_config->rf.tx_gain[ant][0] = txgain[ant];
p_exmimo_config->rf.rf_local[ant] = rf_local[ant];
p_exmimo_config->rf.rf_rxdc[ant] = rf_rxdc[ant];
if ((carrier_freq[ant] >= 850000000) && (carrier_freq[ant] <= 865000000)) {
p_exmimo_config->rf.rf_vcocal[ant] = rf_vcocal_850[ant];
p_exmimo_config->rf.rffe_band_mode[ant] = DD_TDD;
}
else if ((carrier_freq[ant] >= 1900000000) && (carrier_freq[ant] <= 2000000000)) {
p_exmimo_config->rf.rf_vcocal[ant] = rf_vcocal[ant];
p_exmimo_config->rf.rffe_band_mode[ant] = B19G_TDD;
}
else {
p_exmimo_config->rf.rf_vcocal[ant] = rf_vcocal[ant];
p_exmimo_config->rf.rffe_band_mode[ant] = 0;
}
p_exmimo_config->rf.rffe_gain_txlow[ant] = 31;
p_exmimo_config->rf.rffe_gain_txhigh[ant] = 31;
p_exmimo_config->rf.rffe_gain_rxfinal[ant] = 52;
p_exmimo_config->rf.rffe_gain_rxlow[ant] = 31;
}
number_of_cards = openair0_num_detected_cards;
/*
if (p_exmimo_id->board_exmimoversion==1) //ExpressMIMO1
openair_daq_vars.timing_advance = 138;
else //ExpressMIMO2
openair_daq_vars.timing_advance = 0;
*/
openair0_dump_config(card);
printf("EXMIMO_CONFIG: rf_mode 0x %x %x %x %x, [0]: TXRXEn %d, TXLPFEn %d, TXLPF %d, RXLPFEn %d, RXLPF %d, RFBB %d, LNA %d, LNAGain %d, RXLPFMode %d, SWITCH %d, rf_rxdc %d, rf_local %d, rf_vcocal %d\n",
p_exmimo_config->rf.rf_mode[0],
p_exmimo_config->rf.rf_mode[1],
p_exmimo_config->rf.rf_mode[2],
p_exmimo_config->rf.rf_mode[3],
(p_exmimo_config->rf.rf_mode[0]&3), // RXen+TXen
(p_exmimo_config->rf.rf_mode[0]&4)>>2, //TXLPFen
(p_exmimo_config->rf.rf_mode[0]&TXLPFMASK)>>3, //TXLPF
(p_exmimo_config->rf.rf_mode[0]&128)>>7, //RXLPFen
(p_exmimo_config->rf.rf_mode[0]&RXLPFMASK)>>8, //TXLPF
(p_exmimo_config->rf.rf_mode[0]&RFBBMASK)>>16, // RFBB mode
(p_exmimo_config->rf.rf_mode[0]&LNAMASK)>>12, // RFBB mode
(p_exmimo_config->rf.rf_mode[0]&LNAGAINMASK)>>14, // RFBB mode
(p_exmimo_config->rf.rf_mode[0]&RXLPFMODEMASK)>>19, // RXLPF mode
(p_exmimo_config->framing.tdd_config&TXRXSWITCH_MASK)>>1, // Switch mode
p_exmimo_config->rf.rf_rxdc[0],
p_exmimo_config->rf.rf_local[0],
p_exmimo_config->rf.rf_vcocal[0]);
for (ant=0;ant<4;ant++)
p_exmimo_config->rf.do_autocal[ant] = 0;
#ifdef EMOS
error_code = rtf_create(CHANSOUNDER_FIFO_MINOR,CHANSOUNDER_FIFO_SIZE);
if (error_code==0)
printf("[OPENAIR][SCHED][INIT] Created EMOS FIFO %d\n",CHANSOUNDER_FIFO_MINOR);
else if (error_code==ENODEV)
printf("[OPENAIR][SCHED][INIT] Problem: EMOS FIFO %d is greater than or equal to RTF_NO\n",CHANSOUNDER_FIFO_MINOR);
else if (error_code==ENOMEM)
printf("[OPENAIR][SCHED][INIT] Problem: cannot allocate memory for EMOS FIFO %d\n",CHANSOUNDER_FIFO_MINOR);
else
printf("[OPENAIR][SCHED][INIT] Problem creating EMOS FIFO %d, error_code %d\n",CHANSOUNDER_FIFO_MINOR,error_code);
#endif
mlockall(MCL_CURRENT | MCL_FUTURE);
#ifdef RTAI
// make main thread LXRT soft realtime
task = rt_task_init_schmod(nam2num("MYTASK"), 9, 0, 0, SCHED_FIFO, 0xF);
// start realtime timer and scheduler
#ifdef TIMER_ONESHOT_MODE
rt_set_oneshot_mode();
start_rt_timer(0);
printf("started RTAI timer inoneshot mode\n");
#else
rt_set_periodic_mode();
period = start_rt_timer(nano2count(500000));
printf("started RTAI timer with period %llu ns\n",count2nano(period));
#endif
printf("Init mutex\n");
//mutex = rt_get_adr(nam2num("MUTEX"));
mutex = rt_sem_init(nam2num("MUTEX"), 1);
if (mutex==0)
{
printf("Error init mutex\n");
exit(-1);
}
else
printf("mutex=%p\n",mutex);
#endif
DAQ_MBOX = (volatile unsigned int *) openair0_exmimo_pci[card].rxcnt_ptr[0];
// this starts the DMA transfers
if (UE_flag!=1)
openair0_start_rt_acquisition(card);
#ifdef XFORMS
if (do_forms==1) {
fl_initialize (&argc, argv, NULL, 0, 0);
form_stats = create_form_stats_form();
if (UE_flag==1) {
form_ue[UE_id] = create_lte_phy_scope_ue();
sprintf (title, "LTE DL SCOPE UE");
fl_show_form (form_ue[UE_id]->lte_phy_scope_ue, FL_PLACE_HOTSPOT, FL_FULLBORDER, title);
} else {
for(UE_id=0;UE_id<scope_enb_num_ue;UE_id++) {
form_enb[UE_id] = create_lte_phy_scope_enb();
sprintf (title, "UE%d LTE UL SCOPE eNB",UE_id+1);
fl_show_form (form_enb[UE_id]->lte_phy_scope_enb, FL_PLACE_HOTSPOT, FL_FULLBORDER, title);
}
}
fl_show_form (form_stats->stats_form, FL_PLACE_HOTSPOT, FL_FULLBORDER, "stats");
if (UE_flag==0) {
for (UE_id=0;UE_id<scope_enb_num_ue;UE_id++) {
if (otg_enabled) {
fl_set_button(form_enb[UE_id]->button_0,1);
fl_set_object_label(form_enb[UE_id]->button_0,"DL Traffic ON");
}
else {
fl_set_button(form_enb[UE_id]->button_0,0);
fl_set_object_label(form_enb[UE_id]->button_0,"DL Traffic OFF");
}
}
}
else {
if (openair_daq_vars.use_ia_receiver) {
fl_set_button(form_ue[UE_id]->button_0,1);
fl_set_object_label(form_ue[UE_id]->button_0, "IA Receiver ON");
}
else {
fl_set_button(form_ue[UE_id]->button_0,0);
fl_set_object_label(form_ue[UE_id]->button_0, "IA Receiver OFF");
}
}
ret = pthread_create(&thread2, NULL, scope_thread, NULL);
printf("Scope thread created, ret=%d\n",ret);
}
#endif
#ifdef EMOS
ret = pthread_create(&thread3, NULL, emos_thread, NULL);
printf("EMOS thread created, ret=%d\n",ret);
#endif
rt_sleep_ns(10*FRAME_PERIOD);
#ifndef RTAI
pthread_attr_init (&attr_dlsch_threads);
pthread_attr_setstacksize(&attr_dlsch_threads,OPENAIR_THREAD_STACK_SIZE);
//attr_dlsch_threads.priority = 1;
sched_param_dlsch.sched_priority = sched_get_priority_max(SCHED_FIFO); //OPENAIR_THREAD_PRIORITY;
pthread_attr_setschedparam (&attr_dlsch_threads, &sched_param_dlsch);
pthread_attr_setschedpolicy (&attr_dlsch_threads, SCHED_FIFO);
#endif
// start the main thread
if (UE_flag == 1) {
/*
#ifdef RTAI
thread1 = rt_thread_create(UE_thread, NULL, 100000000);
#else
error_code = pthread_create(&thread1, &attr_dlsch_threads, UE_thread, NULL);
if (error_code!= 0) {
LOG_D(HW,"[lte-softmodem.c] Could not allocate UE_thread, error %d\n",error_code);
return(error_code);
}
else {
LOG_D(HW,"[lte-softmodem.c] Allocate UE_thread successful\n");
}
#endif
#ifdef DLSCH_THREAD
init_rx_pdsch_thread();
rt_sleep_ns(FRAME_PERIOD/10);
init_dlsch_threads();
#endif
printf("UE threads created\n");
*/
}
else {
#ifdef RTAI
thread0 = rt_thread_create(eNB_thread, NULL, 100000000);
#else
error_code = pthread_create(&thread0, &attr_dlsch_threads, eNB_thread, NULL);
if (error_code!= 0) {
LOG_D(HW,"[lte-softmodem.c] Could not allocate eNB_thread, error %d\n",error_code);
return(error_code);
}
else {
LOG_D(HW,"[lte-softmodem.c] Allocate eNB_thread successful\n");
}
#endif
#ifdef ULSCH_THREAD
init_ulsch_threads();
#endif
printf("eNB threads created\n");
}
// wait for end of program
printf("TYPE <CTRL-C> TO TERMINATE\n");
//getchar();
while (oai_exit==0)
rt_sleep_ns(FRAME_PERIOD);
// stop threads
#ifdef XFORMS
printf("waiting for XFORMS thread\n");
if (do_forms==1)
{
pthread_join(thread2,&status);
fl_hide_form(form_stats->stats_form);
fl_free_form(form_stats->stats_form);
if (UE_flag==1) {
fl_hide_form(form_ue[UE_id]->lte_phy_scope_ue);
fl_free_form(form_ue[UE_id]->lte_phy_scope_ue);
} else {
for(UE_id=0;UE_id<scope_enb_num_ue;UE_id++) {
fl_hide_form(form_enb[UE_id]->lte_phy_scope_enb);
fl_free_form(form_enb[UE_id]->lte_phy_scope_enb);
}
}
}
#endif
printf("stopping MODEM threads\n");
// cleanup
if (UE_flag == 1) {
/*
#ifdef RTAI
rt_thread_join(thread1);
#else
pthread_join(thread1,&status);
#endif
#ifdef DLSCH_THREAD
cleanup_dlsch_threads();
cleanup_rx_pdsch_thread();
#endif
*/
}
else {
#ifdef RTAI
rt_thread_join(thread0);
#else
pthread_join(thread0,&status);
#endif
#ifdef ULSCH_THREAD
cleanup_ulsch_threads();
#endif
}
#ifdef OPENAIR2
//cleanup_pdcp_thread();
#endif
#ifdef RTAI
stop_rt_timer();
#endif
printf("stopping card\n");
openair0_stop(card);
printf("closing openair0_lib\n");
openair0_close();
#ifdef EMOS
printf("waiting for EMOS thread\n");
pthread_cancel(thread3);
pthread_join(thread3,&status);
#endif
#ifdef EMOS
error_code = rtf_destroy(CHANSOUNDER_FIFO_MINOR);
printf("[OPENAIR][SCHED][CLEANUP] EMOS FIFO closed, error_code %d\n", error_code);
#endif
if (ouput_vcd)
vcd_signal_dumper_close();
logClean();
return 0;
}
void test_config(int card, int ant, unsigned int rf_mode, int UE_flag) {
p_exmimo_config->framing.eNB_flag = !UE_flag;
p_exmimo_config->framing.tdd_config = 0;
p_exmimo_config->framing.resampling_factor[ant] = 2;
p_exmimo_config->rf.rf_freq_rx[ant] = 1907600000;
p_exmimo_config->rf.rf_freq_tx[ant] = 1907600000;;
p_exmimo_config->rf.rx_gain[ant][0] = 20;
p_exmimo_config->rf.tx_gain[ant][0] = 10;
p_exmimo_config->rf.rf_mode[ant] = rf_mode;
p_exmimo_config->rf.rf_local[ant] = build_rflocal(20,25,26,04);
p_exmimo_config->rf.rf_rxdc[ant] = build_rfdc(128, 128);
p_exmimo_config->rf.rf_vcocal[ant] = (0xE<<6) + 0xE;
}
/*
void setup_ue_buffers(PHY_VARS_UE *phy_vars_ue, LTE_DL_FRAME_PARMS *frame_parms, int carrier) {
int i;
if (phy_vars_ue) {
if ((frame_parms->nb_antennas_rx>1) && (carrier>0)) {
printf("RX antennas > 1 and carrier > 0 not possible\n");
exit(-1);
}
if ((frame_parms->nb_antennas_tx>1) && (carrier>0)) {
printf("TX antennas > 1 and carrier > 0 not possible\n");
exit(-1);
}
// replace RX signal buffers with mmaped HW versions
for (i=0;i<frame_parms->nb_antennas_rx;i++) {
free(phy_vars_ue->lte_ue_common_vars.rxdata[i]);
phy_vars_ue->lte_ue_common_vars.rxdata[i] = (int32_t*) openair0_exmimo_pci[card].adc_head[i+carrier];
printf("rxdata[%d] @ %p\n",i,phy_vars_ue->lte_ue_common_vars.rxdata[i]);
}
for (i=0;i<frame_parms->nb_antennas_tx;i++) {
free(phy_vars_ue->lte_ue_common_vars.txdata[i]);
phy_vars_ue->lte_ue_common_vars.txdata[i] = (int32_t*) openair0_exmimo_pci[card].dac_head[i+carrier];
printf("txdata[%d] @ %p\n",i,phy_vars_ue->lte_ue_common_vars.txdata[i]);
}
}
}
void setup_eNB_buffers(PHY_VARS_eNB *phy_vars_eNB, LTE_DL_FRAME_PARMS *frame_parms, int carrier) {
int i,j;
if (phy_vars_eNB) {
if ((frame_parms->nb_antennas_rx>1) && (carrier>0)) {
printf("RX antennas > 1 and carrier > 0 not possible\n");
exit(-1);
}
if ((frame_parms->nb_antennas_tx>1) && (carrier>0)) {
printf("TX antennas > 1 and carrier > 0 not possible\n");
exit(-1);
}
// replace RX signal buffers with mmaped HW versions
for (i=0;i<frame_parms->nb_antennas_rx;i++) {
free(phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i]);
phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i] = (int32_t*) openair0_exmimo_pci[card].adc_head[i+carrier];
printf("rxdata[%d] @ %p\n",i,phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i]);
for (j=0;j<16;j++) {
printf("rxbuffer %d: %x\n",j,phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i][j]);
phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i][j] = 16-j;
}
}
for (i=0;i<frame_parms->nb_antennas_tx;i++) {
free(phy_vars_eNB->lte_eNB_common_vars.txdata[0][i]);
phy_vars_eNB->lte_eNB_common_vars.txdata[0][i] = (int32_t*) openair0_exmimo_pci[card].dac_head[i+carrier];
printf("txdata[%d] @ %p\n",i,phy_vars_eNB->lte_eNB_common_vars.txdata[0][i]);
for (j=0;j<16;j++) {
printf("txbuffer %d: %x\n",j,phy_vars_eNB->lte_eNB_common_vars.txdata[0][i][j]);
phy_vars_eNB->lte_eNB_common_vars.txdata[0][i][j] = 16-j;
}
}
}
}
*/
Reference in New Issue View Git Blame Copy Permalink