maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
1dab506b78fb080312d398b98dda3e2145508ae2
openairinterface5g/openair1/SCHED_NR/phy_procedures_nr_gNB.c
T
Francesco Mani 1dab506b78 minor changes
2020-07-29 14:50:07 +02:00

477 lines
18 KiB
C
Raw Blame History

/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
#include "PHY/phy_extern.h"
#include "PHY/defs_gNB.h"
#include "sched_nr.h"
#include "PHY/NR_REFSIG/dmrs_nr.h"
#include "PHY/NR_TRANSPORT/nr_transport_proto.h"
#include "PHY/NR_TRANSPORT/nr_dlsch.h"
#include "PHY/NR_TRANSPORT/nr_ulsch.h"
#include "PHY/NR_ESTIMATION/nr_ul_estimation.h"
#include "PHY/NR_UE_TRANSPORT/pucch_nr.h"
#include "SCHED/sched_eNB.h"
#include "sched_nr.h"
#include "SCHED/sched_common_extern.h"
#include "nfapi/open-nFAPI/nfapi/public_inc/nfapi_interface.h"
#include "nfapi/open-nFAPI/nfapi/public_inc/nfapi_nr_interface.h"
#include "fapi_nr_l1.h"
#include "common/utils/LOG/log.h"
#include "common/utils/LOG/vcd_signal_dumper.h"
#include "PHY/INIT/phy_init.h"
#include "PHY/MODULATION/nr_modulation.h"
#include "T.h"
#include "executables/nr-softmodem.h"
#include "executables/softmodem-common.h"
#include "assertions.h"
#include "msc.h"
#include <time.h>
#include "intertask_interface.h"
//#define DEBUG_RXDATA
uint8_t SSB_Table[38]={0,2,4,6,8,10,12,14,254,254,16,18,20,22,24,26,28,30,254,254,32,34,36,38,40,42,44,46,254,254,48,50,52,54,56,58,60,62};
extern uint8_t nfapi_mode;
void nr_set_ssb_first_subcarrier(nfapi_nr_config_request_scf_t *cfg, NR_DL_FRAME_PARMS *fp) {
uint8_t sco = 0;
if (((fp->freq_range == nr_FR1) && (cfg->ssb_table.ssb_subcarrier_offset.value<24)) ||
((fp->freq_range == nr_FR2) && (cfg->ssb_table.ssb_subcarrier_offset.value<12)) )
sco = cfg->ssb_table.ssb_subcarrier_offset.value;
fp->ssb_start_subcarrier = (12 * cfg->ssb_table.ssb_offset_point_a.value + sco);
LOG_D(PHY, "SSB first subcarrier %d (%d,%d)\n", fp->ssb_start_subcarrier,cfg->ssb_table.ssb_offset_point_a.value,sco);
}
void nr_common_signal_procedures (PHY_VARS_gNB *gNB,int frame, int slot) {
NR_DL_FRAME_PARMS *fp=&gNB->frame_parms;
nfapi_nr_config_request_scf_t *cfg = &gNB->gNB_config;
int **txdataF = gNB->common_vars.txdataF;
uint8_t ssb_index, n_hf;
uint16_t ssb_start_symbol, rel_slot;
int txdataF_offset = (slot%2)*fp->samples_per_slot_wCP;
uint16_t slots_per_hf = (fp->slots_per_frame)>>1;
n_hf = fp->half_frame_bit;
// if SSB periodicity is 5ms, they are transmitted in both half frames
if ( cfg->ssb_table.ssb_period.value == 0) {
if (slot<slots_per_hf)
n_hf=0;
else
n_hf=1;
}
// to set a effective slot number in the half frame where the SSB is supposed to be
rel_slot = (n_hf)? (slot-slots_per_hf) : slot;
LOG_D(PHY,"common_signal_procedures: frame %d, slot %d\n",frame,slot);
if(rel_slot<38 && rel_slot>=0) { // there is no SSB beyond slot 37
for (int i=0; i<2; i++) { // max two SSB per frame
ssb_index = i + SSB_Table[rel_slot]; // computing the ssb_index
if ((ssb_index<64) && ((fp->L_ssb >> (63-ssb_index)) & 0x01)) { // generating the ssb only if the bit of L_ssb at current ssb index is 1
fp->ssb_index = ssb_index;
int ssb_start_symbol_abs = nr_get_ssb_start_symbol(fp); // computing the starting symbol for current ssb
ssb_start_symbol = ssb_start_symbol_abs % fp->symbols_per_slot; // start symbol wrt slot
nr_set_ssb_first_subcarrier(cfg, fp); // setting the first subcarrier
LOG_D(PHY,"SS TX: frame %d, slot %d, start_symbol %d\n",frame,slot, ssb_start_symbol);
nr_generate_pss(gNB->d_pss, &txdataF[0][txdataF_offset], AMP, ssb_start_symbol, cfg, fp);
nr_generate_sss(gNB->d_sss, &txdataF[0][txdataF_offset], AMP, ssb_start_symbol, cfg, fp);
if (cfg->carrier_config.num_tx_ant.value <= 4)
nr_generate_pbch_dmrs(gNB->nr_gold_pbch_dmrs[n_hf][ssb_index&7],&txdataF[0][txdataF_offset], AMP, ssb_start_symbol, cfg, fp);
else
nr_generate_pbch_dmrs(gNB->nr_gold_pbch_dmrs[0][ssb_index&7],&txdataF[0][txdataF_offset], AMP, ssb_start_symbol, cfg, fp);
nr_generate_pbch(&gNB->pbch,
&gNB->ssb_pdu,
gNB->nr_pbch_interleaver,
&txdataF[0][txdataF_offset],
AMP,
ssb_start_symbol,
n_hf, frame, cfg, fp);
}
}
}
}
void phy_procedures_gNB_TX(PHY_VARS_gNB *gNB,
int frame,int slot,
int do_meas) {
int aa;
NR_DL_FRAME_PARMS *fp=&gNB->frame_parms;
nfapi_nr_config_request_scf_t *cfg = &gNB->gNB_config;
int offset = gNB->CC_id;
uint8_t ssb_frame_periodicity = 1; // every how many frames SSB are generated
int txdataF_offset = (slot%2)*fp->samples_per_slot_wCP;
if (cfg->ssb_table.ssb_period.value > 1)
ssb_frame_periodicity = 1 <<(cfg->ssb_table.ssb_period.value -1) ;
if ((cfg->cell_config.frame_duplex_type.value == TDD) &&
(nr_slot_select(cfg,frame,slot) == NR_UPLINK_SLOT)) return;
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_gNB_TX+offset,1);
if (do_meas==1) start_meas(&gNB->phy_proc_tx);
// clear the transmit data array for the current subframe
for (aa=0; aa<cfg->carrier_config.num_tx_ant.value; aa++) {
memset(&gNB->common_vars.txdataF[aa][txdataF_offset],0,fp->samples_per_slot_wCP*sizeof(int32_t));
}
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_gNB_COMMON_TX,1);
if (nfapi_mode == 0 || nfapi_mode == 1) {
if ((!(frame%ssb_frame_periodicity))) // generate SSB only for given frames according to SSB periodicity
nr_common_signal_procedures(gNB,frame, slot);
}
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_gNB_COMMON_TX,0);
if (gNB->pdcch_pdu || gNB->ul_dci_pdu) {
LOG_I(PHY, "[gNB %d] Frame %d slot %d Calling nr_generate_dci_top (number of UL/DL DCI %d/%d)\n",
gNB->Mod_id, frame, slot,
gNB->ul_dci_pdu==NULL?0:gNB->ul_dci_pdu->pdcch_pdu.pdcch_pdu_rel15.numDlDci,
gNB->pdcch_pdu==NULL?0:gNB->pdcch_pdu->pdcch_pdu_rel15.numDlDci);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_gNB_PDCCH_TX,1);
nr_generate_dci_top(gNB->pdcch_pdu,
gNB->ul_dci_pdu,
gNB->nr_gold_pdcch_dmrs[slot],
&gNB->common_vars.txdataF[0][txdataF_offset],
AMP, *fp);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_gNB_PDCCH_TX,0);
}
for (int i=0; i<gNB->num_pdsch_rnti; i++) {
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_GENERATE_DLSCH,1);
LOG_D(PHY, "PDSCH generation started (%d)\n", gNB->num_pdsch_rnti);
nr_generate_pdsch(gNB->dlsch[i][0],
gNB->nr_gold_pdsch_dmrs[slot],
gNB->common_vars.txdataF,
AMP, frame, slot, fp, 0,
&gNB->dlsch_encoding_stats,
&gNB->dlsch_scrambling_stats,
&gNB->dlsch_modulation_stats,
&gNB->tinput,
&gNB->tprep,
&gNB->tparity,
&gNB->toutput,
&gNB->dlsch_rate_matching_stats,
&gNB->dlsch_interleaving_stats,
&gNB->dlsch_segmentation_stats);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_GENERATE_DLSCH,0);
}
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_gNB_TX+offset,0);
}
/*
if ((cfg->subframe_config.duplex_mode.value == TDD) &&
((nr_slot_select(fp,frame,slot)&NR_DOWNLINK_SLOT)==SF_DL)) return;
// VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_ENB_RX,1);
*/
void nr_ulsch_procedures(PHY_VARS_gNB *gNB, int frame_rx, int slot_rx, int ULSCH_id, uint8_t harq_pid)
{
NR_DL_FRAME_PARMS *frame_parms = &gNB->frame_parms;
nfapi_nr_pusch_pdu_t *pusch_pdu = &gNB->ulsch[ULSCH_id][0]->harq_processes[harq_pid]->ulsch_pdu;
uint8_t ret;
uint8_t l, number_dmrs_symbols = 0;
uint32_t G;
uint16_t start_symbol, number_symbols, nb_re_dmrs;
start_symbol = pusch_pdu->start_symbol_index;
number_symbols = pusch_pdu->nr_of_symbols;
for (l = start_symbol; l < start_symbol + number_symbols; l++)
number_dmrs_symbols += ((pusch_pdu->ul_dmrs_symb_pos)>>l)&0x01;
if (pusch_pdu->dmrs_config_type==pusch_dmrs_type1)
nb_re_dmrs = 6*pusch_pdu->num_dmrs_cdm_grps_no_data;
else
nb_re_dmrs = 4*pusch_pdu->num_dmrs_cdm_grps_no_data;
G = nr_get_G(pusch_pdu->rb_size,
number_symbols,
nb_re_dmrs,
number_dmrs_symbols, // number of dmrs symbols irrespective of single or double symbol dmrs
pusch_pdu->qam_mod_order,
pusch_pdu->nrOfLayers);
//----------------------------------------------------------
//------------------- ULSCH unscrambling -------------------
//----------------------------------------------------------
start_meas(&gNB->ulsch_unscrambling_stats);
nr_ulsch_unscrambling(gNB->pusch_vars[ULSCH_id]->llr,
G,
0,
pusch_pdu->data_scrambling_id,
pusch_pdu->rnti);
stop_meas(&gNB->ulsch_unscrambling_stats);
//----------------------------------------------------------
//--------------------- ULSCH decoding ---------------------
//----------------------------------------------------------
start_meas(&gNB->ulsch_decoding_stats);
ret = nr_ulsch_decoding(gNB,
ULSCH_id,
gNB->pusch_vars[ULSCH_id]->llr,
frame_parms,
pusch_pdu,
frame_rx,
slot_rx,
harq_pid,
G);
stop_meas(&gNB->ulsch_decoding_stats);
if (ret > gNB->ulsch[ULSCH_id][0]->max_ldpc_iterations){
LOG_I(PHY, "ULSCH %d in error\n",ULSCH_id);
nr_fill_indication(gNB,frame_rx, slot_rx, ULSCH_id, harq_pid, 1);
}
else if(gNB->ulsch[ULSCH_id][0]->harq_processes[harq_pid]->b!=NULL){
LOG_I(PHY, "ULSCH received ok \n");
nr_fill_indication(gNB,frame_rx, slot_rx, ULSCH_id, harq_pid, 0);
}
}
void nr_fill_indication(PHY_VARS_gNB *gNB, int frame, int slot_rx, int ULSCH_id, uint8_t harq_pid, uint8_t crc_flag) {
pthread_mutex_lock(&gNB->UL_INFO_mutex);
int timing_advance_update, cqi;
int sync_pos;
uint16_t mu = gNB->frame_parms.numerology_index;
NR_gNB_ULSCH_t *ulsch = gNB->ulsch[ULSCH_id][0];
NR_UL_gNB_HARQ_t *harq_process = ulsch->harq_processes[harq_pid];
nfapi_nr_pusch_pdu_t *pusch_pdu = &harq_process->ulsch_pdu;
// pdu->data = gNB->ulsch[ULSCH_id+1][0]->harq_processes[harq_pid]->b;
sync_pos = nr_est_timing_advance_pusch(gNB, ULSCH_id); // estimate timing advance for MAC
timing_advance_update = sync_pos * (1 << mu); // scale by the used scs numerology
// scale the 16 factor in N_TA calculation in 38.213 section 4.2 according to the used FFT size
switch (gNB->frame_parms.N_RB_DL) {
case 106: timing_advance_update /= 16; break;
case 217: timing_advance_update /= 32; break;
case 245: timing_advance_update /= 32; break;
case 273: timing_advance_update /= 32; break;
case 66: timing_advance_update /= 12; break;
default: abort();
}
// put timing advance command in 0..63 range
timing_advance_update += 31;
if (timing_advance_update < 0) timing_advance_update = 0;
if (timing_advance_update > 63) timing_advance_update = 63;
LOG_D(PHY, "Estimated timing advance PUSCH is = %d, timing_advance_update is %d \n", sync_pos,timing_advance_update);
// estimate UL_CQI for MAC (from antenna port 0 only)
int SNRtimes10 = dB_fixed_times10(gNB->pusch_vars[ULSCH_id]->ulsch_power[0]) - 300;//(10*gNB->measurements.n0_power_dB[0]);
if (SNRtimes10 < -640) cqi=0;
else if (SNRtimes10 > 635) cqi=255;
else cqi=(640+SNRtimes10)/5;
// crc indication
uint16_t num_crc = gNB->UL_INFO.crc_ind.number_crcs;
gNB->UL_INFO.crc_ind.crc_list = &gNB->crc_pdu_list[0];
gNB->UL_INFO.crc_ind.sfn = frame;
gNB->UL_INFO.crc_ind.slot = slot_rx;
gNB->crc_pdu_list[num_crc].handle = pusch_pdu->handle;
gNB->crc_pdu_list[num_crc].rnti = pusch_pdu->rnti;
gNB->crc_pdu_list[num_crc].harq_id = harq_pid;
gNB->crc_pdu_list[num_crc].tb_crc_status = crc_flag;
gNB->crc_pdu_list[num_crc].num_cb = pusch_pdu->pusch_data.num_cb;
gNB->crc_pdu_list[num_crc].ul_cqi = cqi;
gNB->crc_pdu_list[num_crc].timing_advance = timing_advance_update;
gNB->crc_pdu_list[num_crc].rssi = 0xffff; // invalid value as this is not yet computed
gNB->UL_INFO.crc_ind.number_crcs++;
// rx indication
uint16_t num_rx = gNB->UL_INFO.rx_ind.number_of_pdus;
gNB->UL_INFO.rx_ind.pdu_list = &gNB->rx_pdu_list[0];
gNB->UL_INFO.rx_ind.sfn = frame;
gNB->UL_INFO.rx_ind.slot = slot_rx;
gNB->rx_pdu_list[num_rx].handle = pusch_pdu->handle;
gNB->rx_pdu_list[num_rx].rnti = pusch_pdu->rnti;
gNB->rx_pdu_list[num_rx].harq_id = harq_pid;
gNB->rx_pdu_list[num_rx].ul_cqi = cqi;
gNB->rx_pdu_list[num_rx].timing_advance = timing_advance_update;
gNB->rx_pdu_list[num_rx].rssi = 0xffff; // invalid value as this is not yet computed
if (crc_flag)
gNB->rx_pdu_list[num_rx].pdu_length = 0;
else {
gNB->rx_pdu_list[num_rx].pdu_length = harq_process->TBS;
gNB->rx_pdu_list[num_rx].pdu = harq_process->b;
}
gNB->UL_INFO.rx_ind.number_of_pdus++;
pthread_mutex_unlock(&gNB->UL_INFO_mutex);
}
void phy_procedures_gNB_common_RX(PHY_VARS_gNB *gNB, int frame_rx, int slot_rx) {
uint8_t symbol;
unsigned char aa;
for(symbol = 0; symbol < NR_SYMBOLS_PER_SLOT; symbol++) {
// nr_slot_fep_ul(gNB, symbol, proc->slot_rx, 0, 0);
for (aa = 0; aa < gNB->frame_parms.nb_antennas_rx; aa++) {
nr_slot_fep_ul(&gNB->frame_parms,
gNB->common_vars.rxdata[aa],
gNB->common_vars.rxdataF[aa],
symbol,
slot_rx,
0,
0);
}
}
}
void phy_procedures_gNB_uespec_RX(PHY_VARS_gNB *gNB, int frame_rx, int slot_rx) {
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_gNB_UESPEC_RX,1);
LOG_D(PHY,"phy_procedures_gNB_uespec_RX frame %d, slot %d\n",frame_rx,slot_rx);
for (int i=0;i<NUMBER_OF_NR_PUCCH_MAX;i++){
NR_gNB_PUCCH_t *pucch = gNB->pucch[i];
if (pucch) {
if ((pucch->active == 1) &&
(pucch->frame == frame_rx) &&
(pucch->slot == slot_rx) ) {
nfapi_nr_pucch_pdu_t *pucch_pdu = &pucch[i].pucch_pdu;
uint16_t num_ucis;
switch (pucch_pdu->format_type) {
case 0:
num_ucis = gNB->UL_INFO.uci_ind.num_ucis;
gNB->UL_INFO.uci_ind.uci_list = &gNB->uci_pdu_list[0];
gNB->UL_INFO.uci_ind.sfn = frame_rx;
gNB->UL_INFO.uci_ind.slot = slot_rx;
gNB->uci_pdu_list[num_ucis].pdu_type = NFAPI_NR_UCI_FORMAT_0_1_PDU_TYPE;
gNB->uci_pdu_list[num_ucis].pdu_size = sizeof(nfapi_nr_uci_pucch_pdu_format_0_1_t);
nfapi_nr_uci_pucch_pdu_format_0_1_t *uci_pdu_format0 = &gNB->uci_pdu_list[num_ucis].pucch_pdu_format_0_1;
nr_decode_pucch0(gNB,
slot_rx,
uci_pdu_format0,
pucch_pdu);
gNB->UL_INFO.uci_ind.num_ucis += 1;
pucch->active = 0;
break;
default:
AssertFatal(1==0,"Only PUCCH format 0 is currently supported\n");
}
}
}
}
for (int ULSCH_id=0;ULSCH_id<NUMBER_OF_NR_ULSCH_MAX;ULSCH_id++) {
NR_gNB_ULSCH_t *ulsch = gNB->ulsch[ULSCH_id][0];
int harq_pid;
int no_sig;
NR_UL_gNB_HARQ_t *ulsch_harq;
if ((ulsch) &&
(ulsch->rnti > 0)) {
// for for an active HARQ process
for (harq_pid=0;harq_pid<NR_MAX_ULSCH_HARQ_PROCESSES;harq_pid++) {
ulsch_harq = ulsch->harq_processes[harq_pid];
AssertFatal(ulsch_harq!=NULL,"harq_pid %d is not allocated\n",harq_pid);
if ((ulsch_harq->status == NR_ACTIVE) &&
(ulsch_harq->frame == frame_rx) &&
(ulsch_harq->slot == slot_rx) &&
(ulsch_harq->handled == 0)){
LOG_I(PHY, "PUSCH generation started in frame %d slot %d\n",
frame_rx,slot_rx);
#ifdef DEBUG_RXDATA
NR_DL_FRAME_PARMS *frame_parms = &gNB->frame_parms;
RU_t *ru = gNB->RU_list[0];
int slot_offset = frame_parms->get_samples_slot_timestamp(slot_rx,frame_parms,0);
slot_offset -= ru->N_TA_offset;
char name[128];
FILE *f;
sprintf(name, "rxdata.%d.%d.%d.raw", ulsch->rnti,frame_rx,slot_rx);
f = fopen(name, "w"); if (f == NULL) exit(1);
fwrite(&ru->common.rxdata[0][slot_offset],2,frame_parms->get_samples_per_slot(slot_rx,frame_parms)*2, f);
fclose(f);
#endif
uint8_t symbol_start = ulsch_harq->ulsch_pdu.start_symbol_index;
uint8_t symbol_end = symbol_start + ulsch_harq->ulsch_pdu.nr_of_symbols;
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_NR_RX_PUSCH,1);
for(uint8_t symbol = symbol_start; symbol < symbol_end; symbol++) {
no_sig = nr_rx_pusch(gNB, ULSCH_id, frame_rx, slot_rx, symbol, harq_pid);
if (no_sig) return;
}
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_NR_RX_PUSCH,0);
//LOG_M("rxdataF_comp.m","rxF_comp",gNB->pusch_vars[0]->rxdataF_comp[0],6900,1,1);
//LOG_M("rxdataF_ext.m","rxF_ext",gNB->pusch_vars[0]->rxdataF_ext[0],6900,1,1);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_NR_ULSCH_PROCEDURES_RX,1);
nr_ulsch_procedures(gNB, frame_rx, slot_rx, ULSCH_id, harq_pid);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_NR_ULSCH_PROCEDURES_RX,0);
break;
}
}
}
}
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_gNB_UESPEC_RX,0);
}
Reference in New Issue View Git Blame Copy Permalink