maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
1e08469ed8fe8232133be1f2df53fa17ee81cb06
openairinterface5g/cmake_targets/CMakeLists.txt
T
Raymond Knopp 1e08469ed8 conversion of some sse4 code to avx2 for turbo encoder. No noticeable improvement (output expansion for encoder doesn't benefit much because of unpack instruction difference on AVX2. 
maxh adjustement in dlsch_demodulation (to be checked further for other mcs)

exit criterion in dlsim to allow estimation of lower BLER.
2015-12-14 01:51:26 -08:00

1859 lines
72 KiB
CMake
Raw Blame History

################################################################################
# OpenAirInterface
# Copyright(c) 1999 - 2014 Eurecom
#
# OpenAirInterface is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# OpenAirInterface is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with OpenAirInterface.The full GNU General Public License is
# included in this distribution in the file called "COPYING". If not,
# see <http://www.gnu.org/licenses/>.
#
# Contact Information
# OpenAirInterface Admin: openair_admin@eurecom.fr
# OpenAirInterface Tech : openair_tech@eurecom.fr
# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
#
# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
# Author: laurent THOMAS, Lionel GAUTHIER
###############################################################################
cmake_minimum_required (VERSION 2.8)
#############################################
# Base directories, compatible with legacy OAI building
################################################
set (OPENAIR_DIR $ENV{OPENAIR_DIR})
set (OPENAIR1_DIR ${OPENAIR_DIR}/openair1)
set (OPENAIR2_DIR ${OPENAIR_DIR}/openair2)
set (OPENAIR3_DIR ${OPENAIR_DIR}/openair3)
set (OPENAIR_TARGETS ${OPENAIR_DIR}/targets)
set (OPENAIR3_DIR ${OPENAIR_DIR}/openair3)
set (OPENAIR_CMAKE ${OPENAIR_DIR}/cmake_targets)
set (OPENAIR_BIN_DIR ${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY})
project (OpenAirInterface)
###########################################
# macros to define options as there is numerous options in oai
################################################
macro(add_option name val helpstr)
if(DEFINED ${name})
set(value ${${name}})
else(DEFINED ${name})
set(value ${val})
endif()
set(${name} ${value} CACHE STRING "${helpstr}")
add_definitions("-D${name}=${value}")
endmacro(add_option)
macro(add_boolean_option name val helpstr)
if(DEFINED ${name})
set(value ${${name}})
else(DEFINED ${name})
set(value ${val})
endif()
set(${name} ${value} CACHE STRING "${helpstr}")
set_property(CACHE ${name} PROPERTY TYPE BOOL)
if (${value})
add_definitions("-D${name}")
endif (${value})
endmacro(add_boolean_option)
macro(add_integer_option name val helpstr)
if(DEFINED ${name})
set(value ${${name}})
else(DEFINED ${name})
set(value ${val})
endif()
set(${name} ${value} CACHE STRING "${helpstr}")
add_definitions("-D${name}=${value}")
endmacro(add_integer_option)
macro(add_list1_option name val helpstr)
if(DEFINED ${name})
set(value ${${name}})
else(DEFINED ${name})
set(value ${val})
endif()
set(${name} ${value} CACHE STRING "${helpstr}")
set_property(CACHE ${name} PROPERTY STRINGS ${ARGN})
if(NOT "${value}" STREQUAL "False")
add_definitions("-D${name}=${value}")
endif()
endmacro(add_list1_option)
macro(add_list2_option name val helpstr)
if(DEFINED ${name})
set(value ${${name}})
else(DEFINED ${name})
set(value ${val})
endif()
set(${name} ${value} CACHE STRING "${helpstr}")
set_property(CACHE ${name} PROPERTY STRINGS ${ARGN})
if(NOT "${value}" STREQUAL "False")
add_definitions("-D${value}=1")
endif()
endmacro(add_list2_option)
macro(add_list_string_option name val helpstr)
if(DEFINED ${name})
set(value ${${name}})
else(DEFINED ${name})
set(value ${val})
endif()
set(${name} ${value} CACHE STRING "${helpstr}")
set_property(CACHE ${name} PROPERTY STRINGS ${ARGN})
if(NOT "${value}" STREQUAL "False")
add_definitions("-D${name}=\"${value}\"")
endif()
endmacro(add_list_string_option)
####################################################
# compilation flags
#############################################
if (CMAKE_BUILD_TYPE STREQUAL "")
set(CMAKE_BUILD_TYPE "RelWithDebInfo")
endif()
add_list_string_option(CMAKE_BUILD_TYPE "RelWithDebInfo" "Choose the type of build, options are: None(CMAKE_CXX_FLAGS or CMAKE_C_FLAGS used) Debug Release RelWithDebInfo MinSizeRel." Debug Release RelWithDebInfo MinSizeRel)
Message("Architecture is ${CMAKE_SYSTEM_PROCESSOR}")
if (CMAKE_SYSTEM_PROCESSOR STREQUAL "armv7l")
set(C_FLAGS_PROCESSOR "-gdwarf-2 -mfloat-abi=hard -mfpu=neon -lgcc -lrt")
else (CMAKE_SYSTEM_PROCESSOR STREQUAL "armv7l")
file(STRINGS "/proc/cpuinfo" CPUINFO REGEX flags LIMIT_COUNT 1)
#Message("CPUINFO is ${CPUINFO}")
if (CPUINFO MATCHES "avx2")
set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -mavx2")
endif()
if (CPUINFO MATCHES "sse4_2")
set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -msse4.2")
endif()
if (CPUINFO MATCHES "sse4_1")
set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -msse4.1")
endif()
if (CPUINFO MATCHES "ssse3")
set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -mssse3")
endif()
endif()
set(C_FLAGS_PROCESSOR " ${C_FLAGS_PROCESSOR} ${CFLAGS_PROCESSOR_USER}")
Message("C_FLAGS_PROCESSOR is ${C_FLAGS_PROCESSOR}")
if (CMAKE_SYSTEM_PROCESSOR MATCHES "x86")
if ( (NOT( C_FLAGS_PROCESSOR MATCHES "ssse3")) OR (NOT( C_FLAGS_PROCESSOR MATCHES "msse4.1")) OR (NOT( C_FLAGS_PROCESSOR MATCHES "msse4.2")) )
Message(FATAL_ERROR "For x86 Architecture, you must have following flags: -mssse3 -msse4.1 -msse4.2. The current detected flags are: ${C_FLAGS_PROCESSOR}. You can pass the flags manually in build script, for example: ./build_oai --cflags_processor \"-mssse3 -msse4.1 -msse4.2\" ")
endif()
endif()
#
set(CMAKE_C_FLAGS
"${CMAKE_C_FLAGS} ${C_FLAGS_PROCESSOR} -std=gnu99 -Wall -Wstrict-prototypes -fno-strict-aliasing -rdynamic -funroll-loops -Wno-packed-bitfield-compat -fPIC ")
# add autotools definitions that were maybe used!
set(CMAKE_C_FLAGS
"${CMAKE_C_FLAGS} -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_FCNTL_H=1 -DHAVE_ARPA_INET_H=1 -DHAVE_SYS_TIME_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRERROR=1 -DHAVE_SOCKET=1 -DHAVE_MEMSET=1 -DHAVE_GETTIMEOFDAY=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_LIBSCTP"
)
set(CMAKE_CXX_FLAGS
"${CMAKE_CXX_FLAGS} ${C_FLAGS_PROCESSOR}"
)
# set a flag for changes in the source code
# these changes are related to hardcoded path to include .h files
add_definitions(-DCMAKER)
set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3")
set(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3 -O2")
# Below has been put in comment because does not work with
# SVN authentication.
#
#find_package(Subversion)
#if(SUBVERSION_FOUND)
# Subversion_WC_INFO(${OPENAIR_DIR} openair)
# set (FIRMWARE_VERSION "${openair_WC_REVISION} - ${openair_WC_LAST_CHANGED_DATE}")
# Subversion_WC_LOG(${OPENAIR_DIR} Project)
#else()
# set (FIRMWARE_VERSION "No svn information")
#endif()
#add_definitions("-DFIRMWARE_VERSION=\"${FIRMWARE_VERSION}\"")
# Below is a hard-coded info
set (FIRMWARE_VERSION "No svn information")
add_definitions("-DFIRMWARE_VERSION=\"${FIRMWARE_VERSION}\"")
add_definitions("-DPACKAGE_VERSION=\"${FIRMWARE_VERSION}\"")
add_definitions("-DPACKAGE_BUGREPORT=\"OpenAirInterface web site\"")
# Debug related options
#########################################
add_boolean_option(MSG_PRINT False "print debug messages")
add_boolean_option(DISABLE_XER_PRINT False "print XER Format")
add_boolean_option(XER_PRINT False "print XER Format")
add_boolean_option(RRC_MSG_PRINT False "print RRC messages")
add_boolean_option(PDCP_MSG_PRINT False "print PDCP messages to /tmp/pdcp.log")
add_boolean_option(DEBUG_PDCP_PAYLOAD False "print PDCP PDU to stdout") # if true, make sure that global and PDCP log levels are trace
add_boolean_option(DEBUG_MAC_INTERFACE False "print MAC-RLC PDU exchange to stdout") # if true, make sure that global and PDCP log levels are trace
add_boolean_option(TRACE_RLC_PAYLOAD False "print RLC PDU to stdout") # if true, make sure that global and PDCP log levels are trace
add_boolean_option(TEST_OMG False "???")
add_boolean_option(DEBUG_OMG False "???")
add_boolean_option(XFORMS False "This adds the possibility to see the signal oscilloscope")
add_boolean_option(PRINT_STATS False "This adds the possibility to see the status")
add_boolean_option(DEBUG_CONSOLE False "makes debugging easier, disables stdout/stderr buffering")
add_boolean_option(ENABLE_ITTI True "ITTI is internal messaging, should remain enabled for most targets")
set (ITTI_DIR ${OPENAIR_DIR}/common/utils/itti)
if (${ENABLE_ITTI})
add_library(ITTI
# add .h files if depend on (this one is generated)
${ITTI_DIR}/intertask_interface.h
${ITTI_DIR}/intertask_interface.c
${ITTI_DIR}/intertask_interface_dump.c
${ITTI_DIR}/backtrace.c
${ITTI_DIR}/memory_pools.c
${ITTI_DIR}/signals.c
${ITTI_DIR}/timer.c
)
set(ITTI_LIB ITTI)
set(GTPU_need_ITTI ${OPENAIR3_DIR}/GTPV1-U/gtpv1u_eNB.c)
endif (${ENABLE_ITTI})
add_boolean_option(RTAI False "Use RTAI")
if (${RTAI})
set(LOWLATENCY False)
add_definitions("-DENABLE_RTAI_CLOCK")
add_definitions("-DCONFIG_RTAI_LXRT_INLINE")
include_directories ("/usr/realtime/include")
include_directories ("/usr/realtime/include/asm")
set(RTAI_SOURCE sched_dlsch.c sched_rx_pdsch.c rt_wrapper.c vcd_signal_dumper.c log.c)
endif (${RTAI})
#############################
# ASN.1 grammar C code generation & dependancies
################################
# A difficulty: asn1c generates C code of a un-predictable list of files
# so, generate the c from asn1c once at cmake run time
# So, if someone modify the asn.1 source file in such as way that it will create
# (so creating new asn.1 objects instead of modifying the object attributes)
# New C code source file, cmake must be re-run (instead of re-running make only)
#############
set(asn1c_call "${OPENAIR_CMAKE}/tools/generate_asn1")
set(asn1_generated_dir ${OPENAIR_BIN_DIR})
# RRC
######
add_list2_option(RRC_ASN1_VERSION "Rel10" "ASN.1 version of RRC interface" "Rel8" "Rel10" "CBA")
if (${RRC_ASN1_VERSION} STREQUAL "Rel8")
set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LITE/MESSAGES/asn1c/ASN1_files/EUTRA-RRC-Definitions-86.asn)
elseif (${RRC_ASN1_VERSION} STREQUAL "CBA")
set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LITE/MESSAGES/asn1c/ASN1_files/EUTRA-RRC-Definitions-a20-lola.asn)
else()
set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LITE/MESSAGES/asn1c/ASN1_files/EUTRA-RRC-Definitions-a20.asn)
endif (${RRC_ASN1_VERSION} STREQUAL "Rel8")
set (RRC_FULL_DIR ${asn1_generated_dir}/${RRC_ASN1_VERSION})
if(NOT EXISTS ${asn1c_call})
message( FATAL_ERROR "The script ${asn1c_call} must be present" )
endif(NOT EXISTS ${asn1c_call})
execute_process(COMMAND ${asn1c_call} ${RRC_FULL_DIR} ${RRC_GRAMMAR})
file(GLOB rrc_source ${RRC_FULL_DIR}/*.c)
set(rrc_source ${rrc_source} ${OPENAIR2_DIR}/RRC/LITE/MESSAGES/asn1_msg.c)
file(GLOB rrc_h ${RRC_FULL_DIR}/*.h)
set(rrc_h ${rrc_h} ${RRC_FULL_DIR}/asn1_constants.h)
set_source_files_properties(${rrc_source} PROPERTIES COMPILE_FLAGS -w) # suppress warnings from generated code
add_library(RRC_LIB ${rrc_h} ${rrc_source})
include_directories ("${RRC_FULL_DIR}")
# add the command to generate the source code
# Warning: if you modify ASN.1 source file to generate new C files, cmake should be re-run instead of make
add_custom_command (
OUTPUT ${RRC_FULL_DIR}/asn1_constants.h
COMMAND ${asn1c_call} ${RRC_FULL_DIR} ${RRC_GRAMMAR}
DEPENDS ${RRC_GRAMMAR}
)
# S1AP
# Same limitation as described in RRC: unknown generated file list
# so we generate it at cmake time
##############
add_list1_option(S1AP_VERSION R10 "S1AP Asn.1 grammar version" R8 R9 R10)
set(S1AP_DIR ${OPENAIR3_DIR}/S1AP)
if (${S1AP_VERSION} STREQUAL "R10")
set (ASN1RELDIR R10.5)
add_definitions("-DUPDATE_RELEASE_9 -DUPDATE_RELEASE_10")
elseif (${S1AP_VERSION} STREQUAL "R9")
set (ASN1RELDIR R9.8)
add_definitions("-DUPDATE_RELEASE_9")
else(${S1AP_VERSION} STREQUAL "R8")
set (ASN1RELDIR R8.10)
endif(${S1AP_VERSION} STREQUAL "R10")
set(S1AP_ASN_DIR ${S1AP_DIR}/MESSAGES/ASN1/${ASN1RELDIR})
set(S1AP_ASN_FILES
${S1AP_ASN_DIR}/S1AP-CommonDataTypes.asn
${S1AP_ASN_DIR}/S1AP-Constants.asn
${S1AP_ASN_DIR}/S1AP-IEs.asn
${S1AP_ASN_DIR}/S1AP-PDU.asn
)
set(S1AP_C_DIR ${asn1_generated_dir}/${ASN1RELDIR})
#message("calling ${asn1c_call} ${S1AP_C_DIR} ${S1AP_ASN_FILES}")
execute_process(COMMAND ${asn1c_call} ${S1AP_C_DIR} ${S1AP_ASN_FILES})
file(GLOB S1AP_source ${S1AP_C_DIR}/*.c)
set(S1AP_OAI_generated
${S1AP_C_DIR}/s1ap_decoder.c
${S1AP_C_DIR}/s1ap_encoder.c
${S1AP_C_DIR}/s1ap_xer_print.c
${S1AP_C_DIR}/s1ap_ies_defs.h
)
file(GLOB s1ap_h ${S1AP_C_DIR}/*.h)
set(s1ap_h ${s1ap_h} )
add_custom_command (
OUTPUT ${S1AP_OAI_generated}
COMMAND ${asn1c_call} ${S1AP_C_DIR} ${S1AP_ASN_FILES}
COMMAND python ${S1AP_DIR}/MESSAGES/ASN1/asn1tostruct.py -f${S1AP_ASN_DIR}/S1AP-PDU-Contents.asn -o${S1AP_C_DIR}
DEPENDS ${S1AP_ASN_FILES}
)
add_library(S1AP_LIB
${S1AP_OAI_generated}
${S1AP_source}
${S1AP_DIR}/s1ap_common.c
)
include_directories ("${S1AP_C_DIR}")
include_directories ("${S1AP_DIR}")
add_library(S1AP_ENB
${S1AP_C_DIR}/s1ap_ies_defs.h
${S1AP_DIR}/s1ap_eNB.c
${S1AP_DIR}/s1ap_eNB_context_management_procedures.c
${S1AP_DIR}/s1ap_eNB_decoder.c
${S1AP_DIR}/s1ap_eNB_encoder.c
${S1AP_DIR}/s1ap_eNB_handlers.c
${S1AP_DIR}/s1ap_eNB_itti_messaging.c
${S1AP_DIR}/s1ap_eNB_management_procedures.c
${S1AP_DIR}/s1ap_eNB_nas_procedures.c
${S1AP_DIR}/s1ap_eNB_nnsf.c
${S1AP_DIR}/s1ap_eNB_overload.c
${S1AP_DIR}/s1ap_eNB_trace.c
${S1AP_DIR}/s1ap_eNB_ue_context.c
)
#X2AP
# Same limitation as described in RRC/S1AP: unknown generated file list
# so we generate it at cmake time
##############
add_list1_option(X2AP_VERSION R11 "X2AP Asn.1 grammar version" R10 R11)
set(X2AP_DIR ${OPENAIR2_DIR}/X2AP)
if (${X2AP_VERSION} STREQUAL "R11")
set (ASN1RELDIR R11.2)
elseif (${X2AP_VERSION} STREQUAL "R10")
set (ASN1RELDIR R.UNKNOWN)
endif(${X2AP_VERSION} STREQUAL "R11")
set(X2AP_ASN_DIR ${X2AP_DIR}/MESSAGES/ASN1/${ASN1RELDIR})
set(X2AP_ASN_FILES
${X2AP_ASN_DIR}/X2AP-CommonDataTypes.asn
${X2AP_ASN_DIR}/X2AP-Constants.asn
${X2AP_ASN_DIR}/X2AP-IEs.asn
${X2AP_ASN_DIR}/X2AP-PDU.asn
${X2AP_ASN_DIR}/X2AP-Containers.asn
)
set(X2AP_C_DIR ${asn1_generated_dir}/${ASN1RELDIR})
#message("calling ${asn1c_call} ${X2AP_C_DIR} ${X2AP_ASN_FILES}")
execute_process(COMMAND ${asn1c_call} ${X2AP_C_DIR} ${X2AP_ASN_FILES})
file(GLOB X2AP_source ${X2AP_C_DIR}/*.c)
set(X2AP_OAI_generated
${X2AP_C_DIR}/x2ap_decoder.c
${X2AP_C_DIR}/x2ap_encoder.c
${X2AP_C_DIR}/x2ap_xer_print.c
${X2AP_C_DIR}/x2ap_ies_defs.h
)
file(GLOB x2ap_h ${X2AP_C_DIR}/*.h)
set(x2ap_h ${x2ap_h} )
#message("calling ${X2AP_DIR}/MESSAGES/ASN1/asn1tostruct.py -f ${X2AP_ASN_DIR}/X2AP-PDU-Contents.asn -o ${X2AP_C_DIR}")
add_custom_command (
OUTPUT ${X2AP_OAI_generated}
COMMAND ${asn1c_call} ${X2AP_C_DIR} ${X2AP_ASN_FILES}
COMMAND python ${X2AP_DIR}/MESSAGES/ASN1/asn1tostruct.py -f ${X2AP_ASN_DIR}/X2AP-PDU-Contents.asn -o ${X2AP_C_DIR}
DEPENDS ${X2AP_ASN_FILES}
)
add_library(X2AP_LIB
${X2AP_OAI_generated}
${X2AP_source}
${X2AP_DIR}/x2ap_common.c
)
include_directories ("${X2AP_C_DIR}")
include_directories ("${X2AP_DIR}")
# Hardware dependant options
###################################
add_list1_option(NB_ANTENNAS_RX "2" "Number of antennas in reception" "1" "2" "4")
add_list1_option(NB_ANTENNAS_TX "2" "Number of antennas in transmission" "1" "2" "4")
add_list1_option(NB_ANTENNAS_TXRX "2" "Number of antennas in ????" "1" "2" "4")
add_list2_option(RF_BOARD "EXMIMO" "RF head type" "False" "EXMIMO" "OAI_USRP" "ETHERNET" "OAI_BLADERF" "CPRIGW")
if (${RF_BOARD} STREQUAL "EXMIMO")
set(DRIVER2013)
include_directories ("${OPENAIR_TARGETS}/ARCH/EXMIMO/USERSPACE/LIB/")
include_directories ("${OPENAIR_TARGETS}/ARCH/EXMIMO/DEFS/")
set(HW_SOURCE ${HW_SOURCE}
${OPENAIR_TARGETS}/ARCH/EXMIMO/USERSPACE/LIB/openair0_lib.c
${OPENAIR_TARGETS}/ARCH/EXMIMO/USERSPACE/LIB/gain_control.c)
elseif (${RF_BOARD} STREQUAL "OAI_USRP")
include_directories("${OPENAIR_TARGETS}/ARCH/USRP/USERSPACE/LIB/")
include_directories("/opt/include/uhd")
set(HW_SOURCE ${HW_SOURCE}
${OPENAIR_TARGETS}/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp)
LINK_DIRECTORIES("/opt/lib")
set(option_HW_lib "uhd")
set(LOWLATENCY False)
elseif (${RF_BOARD} STREQUAL "OAI_BLADERF")
include_directories("${OPENAIR_TARGETS}/ARCH/BLADERF/USERSPACE/LIB/")
include_directories("${OPENAIR2_DIR}/UTIL/LOG")
include_directories("/usr/include")
set(HW_SOURCE ${HW_SOURCE}
${OPENAIR_TARGETS}/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c
)
LINK_DIRECTORIES("/usr/lib/x86_64-linux-gnu")
set(option_HW_lib "bladeRF")
#set(LOWLATENCY False)
elseif (${RF_BOARD} STREQUAL "ETHERNET")
include_directories ("${OPENAIR_TARGETS}/ARCH/ETHERNET/USERSPACE/LIB")
set(HW_SOURCE ${HW_SOURCE}
${OPENAIR_TARGETS}/ARCH/ETHERNET/USERSPACE/LIB/ethernet_lib.c
)
set(LOWLATENCY True)
elseif (${RF_BOARD} STREQUAL "CPRIGW")
set(HW_SOURCE ${HW_SOURCE}
${OPENAIR_TARGETS}/ARCH/CPRIGW/USERSPACE/LIB/cprigw_lib.c
)
include_directories("${OPENAIR_TARGETS}/ARCH/CPRIGW/USERSPACE/LIB/")
set(option_HW_lib "-rdynamic dl")
endif (${RF_BOARD} STREQUAL "EXMIMO")
include_directories ("${OPENAIR_TARGETS}/ARCH/COMMON")
##############################################################
# ???!!! TO BE DOCUMENTED OPTIONS !!!???
##############################################################
add_boolean_option(ENABLE_SECURITY True "Enable LTE integrity and ciphering between RRC UE and eNB")
add_boolean_option(ENABLE_USE_MME True "eNB connected to MME (INTERFACE S1-C), not standalone eNB")
add_boolean_option(NO_RRM True "DO WE HAVE A RADIO RESSOURCE MANAGER: NO")
add_boolean_option(USER_MODE True "????")
add_boolean_option(RRC_DEFAULT_RAB_IS_AM False "set the RLC mode to AM for the default bearer")
add_boolean_option(OAI_NW_DRIVER_TYPE_ETHERNET False "????")
add_boolean_option(DISABLE_USE_NAS False "???")
add_boolean_option(LOWLATENCY True "Use the Linux scheduler SCHED_DEADLINE: kernel >= 3.14")
add_boolean_option(NAS_ADDRESS_FIX False "specific to oaisim: for nasmesh driver")
add_boolean_option(NAS_NETLINK False "???? Must be True to compile nasmesh driver without rtai")
add_boolean_option(OAISIM False "specific to oaisim")
add_boolean_option(OAI_NW_DRIVER_USE_NETLINK True "????")
add_boolean_option(USE_MME False "this flag is used only one time in lte-softmodem.c")
add_list_string_option(PACKAGE_NAME "NotDefined" "As per attribute name")
add_boolean_option(MESSAGE_CHART_GENERATOR False "For generating sequence diagrams")
add_boolean_option(MESSAGE_CHART_GENERATOR_RLC_MAC False "trace RLC-MAC exchanges in sequence diagrams")
add_boolean_option(MESSAGE_CHART_GENERATOR_PHY False "trace some PHY exchanges in sequence diagrams")
########################
# Include order
##########################
add_boolean_option(ENB_MODE True "Swap the include directories between openair2 and openair3" )
##########################
# Emulation options
##########################
add_boolean_option(ENABLE_PGM_TRANSPORT False "specific to oaisim, emulation through ethernet, reliable multicast")
add_boolean_option(ADDR_CONF False "specific to oaisim, IP autoconf of user-plane IP interface")
add_boolean_option(OPENAIR_EMU False "specific to oaisim")
add_boolean_option(OAI_EMU False "specific to oaisim")
add_boolean_option(PHY_ABSTRACTION False "specific to oaisim")
##########################
# SCHEDULING/REAL-TIME/PERF options
##########################
add_boolean_option(ENABLE_USE_CPU_EXECUTION_TIME True "Add data in vcd traces: disable it if perf issues")
add_boolean_option(ENABLE_VCD True "always true now, time measurements of proc calls and var displays")
add_boolean_option(ENABLE_VCD_FIFO True "time measurements of proc calls and var displays sent to FIFO (one more thread)")
add_boolean_option(HARD_RT False "???")
add_boolean_option(LINUX False "used in weird memcpy() in pdcp.c ???")
add_boolean_option(LINUX_LIST False "used only in lists.c: either use OAI implementation of lists or Linux one (should be True, but it is False")
add_boolean_option(LOG_NO_THREAD True "Disable thread for log, seems always set to true")
add_boolean_option(OPENAIR_LTE True "Seems legacy: keep it to true")
##########################
# PHY options
##########################
add_boolean_option(DRIVER2013 True "only relevant for EXMIMO")
add_boolean_option(ENABLE_FXP True "????")
add_boolean_option(ENABLE_NEW_MULTICAST False "specific to oaisim")
add_boolean_option(EXMIMO_IOT True "????")
add_boolean_option(LARGE_SCALE False "specific to oaisim: defines max eNB=2 and max UE=120")
add_boolean_option(LOCALIZATION False "???")
add_integer_option(MAX_NUM_CCs 1 "????")
add_boolean_option(MU_RECEIVER False "????")
add_boolean_option(NEW_FFT True "????")
add_boolean_option(OPENAIR1 True "????")
add_boolean_option(PBS_SIM False "????")
add_boolean_option(PC_DSP True "????")
add_boolean_option(PC_TARGET True "????")
add_boolean_option(PERFECT_CE False "????")
add_boolean_option(PHYSIM True "for L1 simulators (dlsim, ulsim, ...)")
add_boolean_option(PHY_CONTEXT True "not clear: must remain False for dlsim")
add_boolean_option(PHY_EMUL False "not clear: must remain False for dlsim")
add_boolean_option(PUCCH True "????")
add_boolean_option(RANDOM_BF False "????")
add_boolean_option(SMBV False "Rohde&Schwarz SMBV100A vector signal generator")
add_boolean_option(DEBUG_PHY False "Enable PHY layer debugging options")
add_boolean_option(DEBUG_PHY_PROC False "Enable debugging of PHY layer procedures")
add_boolean_option(DEBUG_DLSCH False "Enable debugging of DLSCH physical layer channel")
##########################
# 802.21 options
##########################
add_boolean_option(ENABLE_RAL False "ENABLE 802.21 INTERFACE")
add_boolean_option(USE_3GPP_ADDR_AS_LINK_ADDR False "As per attribute name")
##########################
# NAS LAYER OPTIONS
##########################
add_boolean_option(ENABLE_NAS_UE_LOGGING True "????")
add_boolean_option(NAS_BUILT_IN_UE True "UE NAS layer present in this executable")
add_boolean_option(NAS_UE True "NAS UE INSTANCE (<> NAS_MME)")
##########################
# ACCESS STRATUM LAYER2 OPTIONS
##########################
add_boolean_option(MAC_CONTEXT True "specific to oaisim")
add_boolean_option(JUMBO_FRAME True "ENABLE LARGE SDU in ACCESS STRATUM (larger than common MTU)")
##########################
# RLC LAYER OPTIONS
##########################
add_boolean_option(OPENAIR2 True "Access Stratum layer 2 built in executable")
add_boolean_option(TRACE_RLC_PAYLOAD False "Fatal assert in this case")
add_boolean_option(RLC_STOP_ON_LOST_PDU False "Fatal assert in this case")
add_boolean_option(TRACE_RLC_MUTEX True "TRACE for RLC, possible problem in thread scheduling")
add_boolean_option(TRACE_RLC_AM_BO False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_FREE_SDU False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_HOLE False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_PDU False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_RESEGMENT False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_RX False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_RX_DECODE False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_TX False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_TX_STATUS False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_STATUS_CREATION False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(STOP_ON_IP_TRAFFIC_OVERLOAD False "")
add_boolean_option(TRACE_RLC_UM_DAR False "TRACE for RLC UM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_UM_DISPLAY_ASCII_DATA False "TRACE for RLC UM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_UM_PDU False "TRACE for RLC UM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_UM_RX False "TRACE for RLC UM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_UM_SEGMENT False "TRACE for RLC UM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_UM_TX_STATUS False "TRACE for RLC UM, TO BE CHANGED IN A MORE GENERAL FLAG")
##########################
# PDCP LAYER OPTIONS
##########################
add_boolean_option(PDCP_USE_NETLINK False "For eNB, PDCP communicate with a NETLINK socket if connected to network driver, else could use a RT-FIFO")
add_boolean_option(PDCP_USE_NETLINK_QUEUES False "When PDCP_USE_NETLINK is true, incoming IP packets are stored in queues")
add_boolean_option(LINK_ENB_PDCP_TO_IP_DRIVER False "For eNB, PDCP communicate with a IP driver")
add_boolean_option(LINK_ENB_PDCP_TO_GTPV1U True "For eNB, PDCP communicate with GTP-U protocol (eNB<->S-GW)")
##########################
# RRC LAYER OPTIONS
##########################
add_boolean_option(RRC_DEFAULT_RAB_IS_AM False "Otherwise it is UM, configure params are actually set in rrc_eNB.c:rrc_eNB_generate_defaultRRCConnectionReconfiguration(...)")
##########################
# S1AP LAYER OPTIONS
##########################
# none
##########################
# PROJECTS (IST, FRENCH COLL., etc)
# SPECIFIC OPTIONS
##########################
add_boolean_option(SPECTRA False "???")
add_boolean_option(MIH_C_MEDIEVAL_EXTENSIONS False "EXTENSIONS TO MIH 802.21 IN CONTEXT OF IST PROJECT CALLED MEDIEVAL")
add_boolean_option(EMOS False "????")
if(${EMOS})
add_definitions("-D_FILE_OFFSET_BITS=64")
set(EMOS_LIB gps)
endif(${EMOS})
# add the binary tree to the search path for include files
#######################################################
# We will find ConfigOAI.h after generation in target directory
include_directories("${OPENAIR_BIN_DIR}")
# add directories to find all include files
# the internal rule is to use generic names such as defs.h
# but to make it uniq name as adding the relative path in the include directtive
# example: #include "RRC/LITE/defs.h"
#find_path (include_dirs_all *.h ${OPENAIR_DIR})
#find_path (include_dirs_all *.h PATHS /usr/include NO_CMAKE_PATH)
#include_directories("${include_dirs_all}")
# Legacy exact order
if(ENB_MODE)
include_directories("${OPENAIR2_DIR}/COMMON")
include_directories("${OPENAIR2_DIR}/UTIL")
include_directories("${OPENAIR2_DIR}/UTIL/LOG")
include_directories("${OPENAIR3_DIR}/COMMON")
include_directories("${OPENAIR3_DIR}/UTILS")
else()
include_directories("${OPENAIR3_DIR}/COMMON")
include_directories("${OPENAIR3_DIR}/UTILS")
include_directories("${OPENAIR2_DIR}/COMMON")
include_directories("${OPENAIR2_DIR}/UTIL")
include_directories("${OPENAIR2_DIR}/UTIL/LOG")
endif()
include_directories("${OPENAIR1_DIR}")
include_directories("${OPENAIR2_DIR}/NAS")
include_directories("${OPENAIR2_DIR}")
include_directories("${OPENAIR2_DIR}/LAYER2/RLC")
include_directories("${OPENAIR2_DIR}/LAYER2/RLC/AM_v9.3.0")
include_directories("${OPENAIR2_DIR}/LAYER2/RLC/UM_v9.3.0")
include_directories("${OPENAIR2_DIR}/LAYER2/RLC/TM_v9.3.0")
include_directories("${OPENAIR2_DIR}/LAYER2/PDCP_v10.1.0")
include_directories("${OPENAIR2_DIR}/RRC/LITE/MESSAGES")
include_directories("${OPENAIR2_DIR}/RRC/LITE")
include_directories("${OPENAIR3_DIR}/RAL-LTE/INTERFACE-802.21/INCLUDE")
include_directories("${OPENAIR3_DIR}/RAL-LTE/LTE_RAL_ENB/INCLUDE")
include_directories("${OPENAIR3_DIR}/RAL-LTE/LTE_RAL_UE/INCLUDE")
include_directories("${OPENAIR_DIR}/common/utils")
include_directories("${OPENAIR_DIR}/common/utils/itti")
include_directories("${OPENAIR3_DIR}/NAS/COMMON")
include_directories("${OPENAIR3_DIR}/NAS/COMMON/API/NETWORK")
include_directories("${OPENAIR3_DIR}/NAS/COMMON/EMM/MSG")
include_directories("${OPENAIR3_DIR}/NAS/COMMON/ESM/MSG")
include_directories("${OPENAIR3_DIR}/NAS/COMMON/IES")
include_directories("${OPENAIR3_DIR}/NAS/COMMON/UTIL")
include_directories("${OPENAIR3_DIR}/SECU")
include_directories("${OPENAIR3_DIR}/SCTP")
include_directories("${OPENAIR3_DIR}/S1AP")
include_directories("${OPENAIR2_DIR}/X2AP")
include_directories("${OPENAIR3_DIR}/UDP")
include_directories("${OPENAIR3_DIR}/GTPV1-U")
include_directories("${OPENAIR_DIR}/targets/COMMON")
include_directories("${OPENAIR_DIR}/targets/ARCH/COMMON")
include_directories("${OPENAIR_DIR}/targets/ARCH/EXMIMO/USERSPACE/LIB/")
include_directories("${OPENAIR_DIR}/targets/ARCH/EXMIMO/DEFS")
include_directories("${OPENAIR2_DIR}/ENB_APP")
include_directories("${OPENAIR2_DIR}/UTIL/OSA")
include_directories("${OPENAIR2_DIR}/UTIL/LFDS/liblfds6.1.1/liblfds611/inc")
include_directories("${OPENAIR2_DIR}/UTIL/MEM")
include_directories("${OPENAIR2_DIR}/UTIL/LISTS")
include_directories("${OPENAIR2_DIR}/UTIL/FIFO")
include_directories("${OPENAIR2_DIR}/UTIL/OCG")
include_directories("${OPENAIR2_DIR}/UTIL/MATH")
include_directories("${OPENAIR2_DIR}/UTIL/TIMER")
include_directories("${OPENAIR2_DIR}/UTIL/OMG")
include_directories("${OPENAIR2_DIR}/UTIL/OTG")
include_directories("${OPENAIR2_DIR}/UTIL/CLI")
include_directories("${OPENAIR2_DIR}/UTIL/OPT")
include_directories("${OPENAIR2_DIR}/UTIL/OMV")
include_directories("${OPENAIR2_DIR}/RRC/LITE/MESSAGES")
include_directories("${OPENAIR3_DIR}/GTPV1-U/nw-gtpv1u/shared")
include_directories("${OPENAIR3_DIR}/GTPV1-U/nw-gtpv1u/include")
include_directories("${OPENAIR_DIR}")
# Utilities Library
################
add_library(HASHTABLE
${OPENAIR_DIR}/common/utils/collection/hashtable/hashtable.c
${OPENAIR_DIR}/common/utils/collection/hashtable/obj_hashtable.c
)
include_directories(${OPENAIR_DIR}/common/utils/collection/hashtable)
if (MESSAGE_CHART_GENERATOR)
add_library(MSC
${OPENAIR_DIR}/common/utils/msc/msc.c
)
set(MSC_LIB MSC)
endif()
include_directories(${OPENAIR_DIR}/common/utils/msc)
set(UTIL_SRC
${OPENAIR2_DIR}/UTIL/CLI/cli.c
${OPENAIR2_DIR}/UTIL/CLI/cli_cmd.c
${OPENAIR2_DIR}/UTIL/CLI/cli_server.c
${OPENAIR2_DIR}/UTIL/FIFO/pad_list.c
${OPENAIR2_DIR}/UTIL/LISTS/list.c
${OPENAIR2_DIR}/UTIL/LISTS/list2.c
${OPENAIR2_DIR}/UTIL/LOG/log.c
${OPENAIR2_DIR}/UTIL/LOG/vcd_signal_dumper.c
${OPENAIR2_DIR}/UTIL/MATH/oml.c
${OPENAIR2_DIR}/UTIL/MEM/mem_block.c
${OPENAIR2_DIR}/UTIL/OCG/OCG.c
${OPENAIR2_DIR}/UTIL/OCG/OCG_create_dir.c
${OPENAIR2_DIR}/UTIL/OCG/OCG_detect_file.c
${OPENAIR2_DIR}/UTIL/OCG/OCG_generate_report.c
${OPENAIR2_DIR}/UTIL/OCG/OCG_parse_filename.c
${OPENAIR2_DIR}/UTIL/OCG/OCG_parse_XML.c
${OPENAIR2_DIR}/UTIL/OCG/OCG_save_XML.c
${OPENAIR2_DIR}/UTIL/OMG/client_traci_OMG.c
${OPENAIR2_DIR}/UTIL/OMG/common.c
${OPENAIR2_DIR}/UTIL/OMG/grid.c
${OPENAIR2_DIR}/UTIL/OMG/id_manager.c
${OPENAIR2_DIR}/UTIL/OMG/job.c
${OPENAIR2_DIR}/UTIL/OMG/mobility_parser.c
${OPENAIR2_DIR}/UTIL/OMG/omg.c
${OPENAIR2_DIR}/UTIL/OMG/omg_hashtable.c
${OPENAIR2_DIR}/UTIL/OMG/rwalk.c
${OPENAIR2_DIR}/UTIL/OMG/rwp.c
${OPENAIR2_DIR}/UTIL/OMG/socket_traci_OMG.c
${OPENAIR2_DIR}/UTIL/OMG/static.c
${OPENAIR2_DIR}/UTIL/OMG/steadystaterwp.c
${OPENAIR2_DIR}/UTIL/OMG/storage_traci_OMG.c
${OPENAIR2_DIR}/UTIL/OMG/trace.c
${OPENAIR2_DIR}/UTIL/OMG/trace_hashtable.c
${OPENAIR2_DIR}/UTIL/OPT/probe.c
${OPENAIR2_DIR}/UTIL/OTG/otg_tx.c
${OPENAIR2_DIR}/UTIL/OTG/otg.c
${OPENAIR2_DIR}/UTIL/OTG/otg_kpi.c
${OPENAIR2_DIR}/UTIL/OTG/otg_models.c
${OPENAIR2_DIR}/UTIL/OTG/otg_form.c
${OPENAIR2_DIR}/UTIL/OTG/otg_rx.c
)
add_library(UTIL ${UTIL_SRC})
set(SECU_OSA_SRC
${OPENAIR2_DIR}/UTIL/OSA/osa_key_deriver.c
${OPENAIR2_DIR}/UTIL/OSA/osa_rijndael.c
${OPENAIR2_DIR}/UTIL/OSA/osa_snow3g.c
${OPENAIR2_DIR}/UTIL/OSA/osa_stream_eea.c
${OPENAIR2_DIR}/UTIL/OSA/osa_stream_eia.c
)
add_library(SECU_OSA ${SECU_OSA_SRC})
set(SECU_CN_SRC
${OPENAIR3_DIR}/SECU/kdf.c
${OPENAIR3_DIR}/SECU/rijndael.c
${OPENAIR3_DIR}/SECU/snow3g.c
${OPENAIR3_DIR}/SECU/key_nas_deriver.c
${OPENAIR3_DIR}/SECU/nas_stream_eea1.c
${OPENAIR3_DIR}/SECU/nas_stream_eia1.c
${OPENAIR3_DIR}/SECU/nas_stream_eea2.c
${OPENAIR3_DIR}/SECU/nas_stream_eia2.c
)
add_library(SECU_CN ${SECU_CN_SRC})
# Scheduler
################################"
file(GLOB SCHED_SRC ${OPENAIR1_DIR}/SCHED/*.c)
add_library(SCHED_LIB ${SCHED_SRC})
# Layer 1
#############################
set(PHY_SRC
# depend on code generation from asn1c
${RRC_FULL_DIR}/asn1_constants.h
# actual source
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pss.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/sss.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pilots.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pilots_mbsfn.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dlsch_coding.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dlsch_modulation.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dlsch_demodulation.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dlsch_llr_computation.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/power_control.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dlsch_decoding.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dlsch_scrambling.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dci_tools.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/uci_tools.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/lte_mcs.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pbch.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dci.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/phich.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pcfich.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pucch.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/prach.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pmch.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/group_hopping.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/srs_modulation.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/drs_modulation.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/ulsch_modulation.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/ulsch_demodulation.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/ulsch_coding.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/ulsch_decoding.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/rar_tools.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/print_stats.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/initial_sync.c
${OPENAIR1_DIR}/PHY/MODULATION/ofdm_mod.c
${OPENAIR1_DIR}/PHY/MODULATION/slot_fep.c
${OPENAIR1_DIR}/PHY/MODULATION/slot_fep_mbsfn.c
${OPENAIR1_DIR}/PHY/MODULATION/slot_fep_ul.c
${OPENAIR1_DIR}/PHY/MODULATION/ul_7_5_kHz.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/freq_equalization.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_sync_time.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_sync_timefreq.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_adjust_sync.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_dl_channel_estimation.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_dl_mbsfn_channel_estimation.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ul_channel_estimation.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_est_freq_offset.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ue_measurements.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_eNB_measurements.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/adjust_gain.c
${OPENAIR1_DIR}/PHY/LTE_REFSIG/lte_dl_cell_spec.c
${OPENAIR1_DIR}/PHY/LTE_REFSIG/lte_dl_uespec.c
${OPENAIR1_DIR}/PHY/LTE_REFSIG/lte_gold.c
${OPENAIR1_DIR}/PHY/LTE_REFSIG/lte_gold_mbsfn.c
${OPENAIR1_DIR}/PHY/LTE_REFSIG/lte_dl_mbsfn.c
${OPENAIR1_DIR}/PHY/LTE_REFSIG/lte_ul_ref.c
${OPENAIR1_DIR}/PHY/CODING/lte_segmentation.c
${OPENAIR1_DIR}/PHY/CODING/ccoding_byte.c
${OPENAIR1_DIR}/PHY/CODING/ccoding_byte_lte.c
${OPENAIR1_DIR}/PHY/CODING/3gpplte_sse.c
${OPENAIR1_DIR}/PHY/CODING/crc_byte.c
${OPENAIR1_DIR}/PHY/CODING/3gpplte_turbo_decoder_sse_8bit.c
${OPENAIR1_DIR}/PHY/CODING/3gpplte_turbo_decoder_sse_16bit.c
${OPENAIR1_DIR}/PHY/CODING/lte_rate_matching.c
${OPENAIR1_DIR}/PHY/CODING/rate_matching.c
${OPENAIR1_DIR}/PHY/CODING/viterbi.c
${OPENAIR1_DIR}/PHY/CODING/viterbi_lte.c
${OPENAIR1_DIR}/PHY/INIT/lte_init.c
${OPENAIR1_DIR}/PHY/INIT/lte_parms.c
${OPENAIR1_DIR}/PHY/TOOLS/file_output.c
${OPENAIR1_DIR}/PHY/TOOLS/lte_dfts.c
${OPENAIR1_DIR}/PHY/TOOLS/log2_approx.c
${OPENAIR1_DIR}/PHY/TOOLS/cmult_sv.c
${OPENAIR1_DIR}/PHY/TOOLS/cmult_vv.c
${OPENAIR1_DIR}/PHY/TOOLS/cdot_prod.c
${OPENAIR1_DIR}/PHY/TOOLS/signal_energy.c
${OPENAIR1_DIR}/PHY/TOOLS/dB_routines.c
${OPENAIR1_DIR}/PHY/TOOLS/sqrt.c
${OPENAIR1_DIR}/PHY/TOOLS/time_meas.c
${OPENAIR1_DIR}/PHY/TOOLS/lut.c
)
if (${SMBV})
set(PHY_SRC "${PHY_SRC} ${OPENAIR1_DIR}/PHY/TOOLS/smbv.c")
endif (${SMBV})
add_library(PHY ${PHY_SRC})
#Layer 2 library
#####################
set(MAC_DIR ${OPENAIR2_DIR}/LAYER2/MAC)
set(RLC_DIR ${OPENAIR2_DIR}/LAYER2/RLC)
set(RLC_UM_DIR ${OPENAIR2_DIR}/LAYER2/RLC/UM_v9.3.0)
set(RLC_AM_DIR ${OPENAIR2_DIR}/LAYER2/RLC/AM_v9.3.0)
set(RLC_TM_DIR ${OPENAIR2_DIR}/LAYER2/RLC/TM_v9.3.0)
set(RRC_DIR ${OPENAIR2_DIR}/RRC/LITE)
set(PDCP_DIR ${OPENAIR2_DIR}/LAYER2/PDCP_v10.1.0)
set(L2_SRC
${OPENAIR2_DIR}/LAYER2/openair2_proc.c
${PDCP_DIR}/pdcp.c
${PDCP_DIR}/pdcp_fifo.c
${PDCP_DIR}/pdcp_sequence_manager.c
${PDCP_DIR}/pdcp_primitives.c
${PDCP_DIR}/pdcp_util.c
${PDCP_DIR}/pdcp_security.c
${PDCP_DIR}/pdcp_netlink.c
${RLC_AM_DIR}/rlc_am.c
${RLC_AM_DIR}/rlc_am_init.c
${RLC_AM_DIR}/rlc_am_timer_poll_retransmit.c
${RLC_AM_DIR}/rlc_am_timer_reordering.c
${RLC_AM_DIR}/rlc_am_timer_status_prohibit.c
${RLC_AM_DIR}/rlc_am_segment.c
${RLC_AM_DIR}/rlc_am_segments_holes.c
${RLC_AM_DIR}/rlc_am_in_sdu.c
${RLC_AM_DIR}/rlc_am_receiver.c
${RLC_AM_DIR}/rlc_am_retransmit.c
${RLC_AM_DIR}/rlc_am_windows.c
${RLC_AM_DIR}/rlc_am_rx_list.c
${RLC_AM_DIR}/rlc_am_reassembly.c
${RLC_AM_DIR}/rlc_am_status_report.c
${RLC_TM_DIR}/rlc_tm.c
${RLC_TM_DIR}/rlc_tm_init.c
${RLC_UM_DIR}/rlc_um.c
${RLC_UM_DIR}/rlc_um_fsm.c
${RLC_UM_DIR}/rlc_um_control_primitives.c
${RLC_UM_DIR}/rlc_um_segment.c
${RLC_UM_DIR}/rlc_um_reassembly.c
${RLC_UM_DIR}/rlc_um_receiver.c
${RLC_UM_DIR}/rlc_um_dar.c
${RLC_DIR}/rlc_mac.c
${RLC_DIR}/rlc.c
${RLC_DIR}/rlc_rrc.c
${RLC_DIR}/rlc_mpls.c
${RRC_DIR}/rrc_UE.c
${RRC_DIR}/rrc_eNB.c
${RRC_DIR}/rrc_eNB_S1AP.c
${RRC_DIR}/rrc_eNB_UE_context.c
${RRC_DIR}/rrc_common.c
${RRC_DIR}/L2_interface.c
)
set (MAC_SRC
${MAC_DIR}/lte_transport_init.c
${MAC_DIR}/main.c
${MAC_DIR}/ue_procedures.c
${MAC_DIR}/ra_procedures.c
${MAC_DIR}/l1_helpers.c
${MAC_DIR}/rar_tools.c
${MAC_DIR}/eNB_scheduler.c
${MAC_DIR}/eNB_scheduler_dlsch.c
${MAC_DIR}/eNB_scheduler_ulsch.c
${MAC_DIR}/eNB_scheduler_mch.c
${MAC_DIR}/eNB_scheduler_bch.c
${MAC_DIR}/eNB_scheduler_primitives.c
${MAC_DIR}/eNB_scheduler_RA.c
${MAC_DIR}/pre_processor.c
${MAC_DIR}/config.c
)
set (ENB_APP_SRC
${OPENAIR2_DIR}/ENB_APP/enb_app.c
${OPENAIR2_DIR}/ENB_APP/enb_config.c
)
add_library(L2
${L2_SRC}
${MAC_SRC}
${ENB_APP_SRC}
${OPENAIR2_DIR}/RRC/L2_INTERFACE/openair_rrc_L2_interface.c)
# L3 Libs
##########################
set(RAL_LTE_DIR ${OPENAIR3_DIR}/RAL-LTE/)
if (${ENABLE_RAL})
set(RAL_LTE_SRC
${RRC_DIR}/rrc_UE_ral.c
${RRC_DIR}/rrc_eNB_ral.c
${RAL_LTE_DIR}LTE_RAL_ENB/SRC/lteRALenb_action.c
${RAL_LTE_DIR}LTE_RAL_ENB/SRC/lteRALenb_main.c
${RAL_LTE_DIR}LTE_RAL_ENB/SRC/lteRALenb_mih_msg.c
${RAL_LTE_DIR}LTE_RAL_ENB/SRC/lteRALenb_parameters.c
${RAL_LTE_DIR}LTE_RAL_ENB/SRC/lteRALenb_process.c
${RAL_LTE_DIR}LTE_RAL_ENB/SRC/lteRALenb_rrc_msg.c
${RAL_LTE_DIR}LTE_RAL_ENB/SRC/lteRALenb_subscribe.c
${RAL_LTE_DIR}LTE_RAL_ENB/SRC/lteRALenb_thresholds.c
${RAL_LTE_DIR}LTE_RAL_UE/SRC/lteRALue_action.c
${RAL_LTE_DIR}LTE_RAL_UE/SRC/lteRALue_main.c
${RAL_LTE_DIR}LTE_RAL_UE/SRC/lteRALue_mih_msg.c
${RAL_LTE_DIR}LTE_RAL_UE/SRC/lteRALue_parameters.c
${RAL_LTE_DIR}LTE_RAL_UE/SRC/lteRALue_process.c
${RAL_LTE_DIR}LTE_RAL_UE/SRC/lteRALue_rrc_msg.c
${RAL_LTE_DIR}LTE_RAL_UE/SRC/lteRALue_subscribe.c
${RAL_LTE_DIR}LTE_RAL_UE/SRC/lteRALue_thresholds.c
)
add_library(RAL ${RAL_LTE_SRC})
set(RAL_LIB RAL)
endif()
if(${MIH_C_MEDIEVAL_EXTENSIONS})
set(MIH_SRC
${RAL_LTE_DIR}INTERFACE-802.21/C/MIH_C_header_codec.c
${RAL_LTE_DIR}INTERFACE-802.21/C/MIH_C_msg_codec.c
${RAL_LTE_DIR}INTERFACE-802.21/C/MIH_C_primitive_codec.c
${RAL_LTE_DIR}INTERFACE-802.21/C/MIH_C_F1_basic_data_types_codec.c
${RAL_LTE_DIR}INTERFACE-802.21/C/MIH_C_F2_general_data_types_codec.c
${RAL_LTE_DIR}INTERFACE-802.21/C/MIH_C_F3_data_types_for_address_codec.c
${RAL_LTE_DIR}INTERFACE-802.21/C/MIH_C_F4_data_types_for_links_codec.c
${RAL_LTE_DIR}INTERFACE-802.21/C/MIH_C_F9_data_types_for_qos_codec.c
${RAL_LTE_DIR}INTERFACE-802.21/C/MIH_C_F13_data_types_for_information_elements_codec.c
${RAL_LTE_DIR}INTERFACE-802.21/C/MIH_C_L2_type_values_for_tlv_encoding.c
${RAL_LTE_DIR}INTERFACE-802.21/C/MIH_C_Medieval_extensions.c
${RAL_LTE_DIR}INTERFACE-802.21/C/MIH_C_bit_buffer.c
${RAL_LTE_DIR}INTERFACE-802.21/C/MIH_C.c
)
add_library(MIH ${MIH_SRC})
set(MIH_LIB MIH)
endif()
# CN libs
##########################
add_library(CN_UTILS
${OPENAIR3_DIR}/UTILS/conversions.c
${OPENAIR3_DIR}/UTILS/enum_string.c
${OPENAIR3_DIR}/UTILS/log.c
${OPENAIR3_DIR}/UTILS/mme_config.c
${OPENAIR3_DIR}/UTILS/mcc_mnc_itu.c
)
set(GTPV1U_DIR ${OPENAIR3_DIR}/GTPV1-U)
set (GTPV1U_SRC
${RRC_DIR}/rrc_eNB_GTPV1U.c
${GTPV1U_DIR}/nw-gtpv1u/src/NwGtpv1uTunnelEndPoint.c
${GTPV1U_DIR}/nw-gtpv1u/src/NwGtpv1uTrxn.c
${GTPV1U_DIR}/nw-gtpv1u/src/NwGtpv1uMsg.c
${GTPV1U_DIR}/nw-gtpv1u/src/NwGtpv1u.c
${GTPV1U_DIR}/gtpv1u_teid_pool.c
)
add_library(GTPV1U ${GTPV1U_SRC})
set(SCTP_SRC
${OPENAIR3_DIR}/SCTP/sctp_common.c
${OPENAIR3_DIR}/SCTP/sctp_eNB_task.c
${OPENAIR3_DIR}/SCTP/sctp_eNB_itti_messaging.c
)
add_library(SCTP_CLIENT ${SCTP_SRC})
add_library(UDP ${OPENAIR3_DIR}/UDP/udp_eNB_task.c)
set(NAS_SRC ${OPENAIR3_DIR}/NAS/)
set(libnas_api_OBJS
${NAS_SRC}COMMON/API/NETWORK/as_message.c
${NAS_SRC}COMMON/API/NETWORK/nas_message.c
${NAS_SRC}COMMON/API/NETWORK/network_api.c
)
set(libnas_emm_msg_OBJS
${NAS_SRC}COMMON/EMM/MSG/AttachAccept.c
${NAS_SRC}COMMON/EMM/MSG/AttachComplete.c
${NAS_SRC}COMMON/EMM/MSG/AttachReject.c
${NAS_SRC}COMMON/EMM/MSG/AttachRequest.c
${NAS_SRC}COMMON/EMM/MSG/AuthenticationFailure.c
${NAS_SRC}COMMON/EMM/MSG/AuthenticationReject.c
${NAS_SRC}COMMON/EMM/MSG/AuthenticationRequest.c
${NAS_SRC}COMMON/EMM/MSG/AuthenticationResponse.c
${NAS_SRC}COMMON/EMM/MSG/CsServiceNotification.c
${NAS_SRC}COMMON/EMM/MSG/DetachAccept.c
${NAS_SRC}COMMON/EMM/MSG/DetachRequest.c
${NAS_SRC}COMMON/EMM/MSG/DownlinkNasTransport.c
${NAS_SRC}COMMON/EMM/MSG/EmmInformation.c
${NAS_SRC}COMMON/EMM/MSG/emm_msg.c
${NAS_SRC}COMMON/EMM/MSG/EmmStatus.c
${NAS_SRC}COMMON/EMM/MSG/ExtendedServiceRequest.c
${NAS_SRC}COMMON/EMM/MSG/GutiReallocationCommand.c
${NAS_SRC}COMMON/EMM/MSG/GutiReallocationComplete.c
${NAS_SRC}COMMON/EMM/MSG/IdentityRequest.c
${NAS_SRC}COMMON/EMM/MSG/IdentityResponse.c
${NAS_SRC}COMMON/EMM/MSG/SecurityModeCommand.c
${NAS_SRC}COMMON/EMM/MSG/SecurityModeComplete.c
${NAS_SRC}COMMON/EMM/MSG/SecurityModeReject.c
${NAS_SRC}COMMON/EMM/MSG/ServiceReject.c
${NAS_SRC}COMMON/EMM/MSG/ServiceRequest.c
${NAS_SRC}COMMON/EMM/MSG/TrackingAreaUpdateAccept.c
${NAS_SRC}COMMON/EMM/MSG/TrackingAreaUpdateComplete.c
${NAS_SRC}COMMON/EMM/MSG/TrackingAreaUpdateReject.c
${NAS_SRC}COMMON/EMM/MSG/TrackingAreaUpdateRequest.c
${NAS_SRC}COMMON/EMM/MSG/UplinkNasTransport.c
)
set(libnas_esm_msg_OBJS
${NAS_SRC}COMMON/ESM/MSG/ActivateDedicatedEpsBearerContextAccept.c
${NAS_SRC}COMMON/ESM/MSG/ActivateDedicatedEpsBearerContextReject.c
${NAS_SRC}COMMON/ESM/MSG/ActivateDedicatedEpsBearerContextRequest.c
${NAS_SRC}COMMON/ESM/MSG/ActivateDefaultEpsBearerContextAccept.c
${NAS_SRC}COMMON/ESM/MSG/ActivateDefaultEpsBearerContextReject.c
${NAS_SRC}COMMON/ESM/MSG/ActivateDefaultEpsBearerContextRequest.c
${NAS_SRC}COMMON/ESM/MSG/BearerResourceAllocationReject.c
${NAS_SRC}COMMON/ESM/MSG/BearerResourceAllocationRequest.c
${NAS_SRC}COMMON/ESM/MSG/BearerResourceModificationReject.c
${NAS_SRC}COMMON/ESM/MSG/BearerResourceModificationRequest.c
${NAS_SRC}COMMON/ESM/MSG/DeactivateEpsBearerContextAccept.c
${NAS_SRC}COMMON/ESM/MSG/DeactivateEpsBearerContextRequest.c
${NAS_SRC}COMMON/ESM/MSG/EsmInformationRequest.c
${NAS_SRC}COMMON/ESM/MSG/EsmInformationResponse.c
${NAS_SRC}COMMON/ESM/MSG/esm_msg.c
${NAS_SRC}COMMON/ESM/MSG/EsmStatus.c
${NAS_SRC}COMMON/ESM/MSG/ModifyEpsBearerContextAccept.c
${NAS_SRC}COMMON/ESM/MSG/ModifyEpsBearerContextReject.c
${NAS_SRC}COMMON/ESM/MSG/ModifyEpsBearerContextRequest.c
${NAS_SRC}COMMON/ESM/MSG/PdnConnectivityReject.c
${NAS_SRC}COMMON/ESM/MSG/PdnConnectivityRequest.c
${NAS_SRC}COMMON/ESM/MSG/PdnDisconnectReject.c
${NAS_SRC}COMMON/ESM/MSG/PdnDisconnectRequest.c
)
set(libnas_ies_OBJS
${NAS_SRC}COMMON/IES/AccessPointName.c
${NAS_SRC}COMMON/IES/AdditionalUpdateResult.c
${NAS_SRC}COMMON/IES/AdditionalUpdateType.c
${NAS_SRC}COMMON/IES/ApnAggregateMaximumBitRate.c
${NAS_SRC}COMMON/IES/AuthenticationFailureParameter.c
${NAS_SRC}COMMON/IES/AuthenticationParameterAutn.c
${NAS_SRC}COMMON/IES/AuthenticationParameterRand.c
${NAS_SRC}COMMON/IES/AuthenticationResponseParameter.c
${NAS_SRC}COMMON/IES/CipheringKeySequenceNumber.c
${NAS_SRC}COMMON/IES/Cli.c
${NAS_SRC}COMMON/IES/CsfbResponse.c
${NAS_SRC}COMMON/IES/DaylightSavingTime.c
${NAS_SRC}COMMON/IES/DetachType.c
${NAS_SRC}COMMON/IES/DrxParameter.c
${NAS_SRC}COMMON/IES/EmergencyNumberList.c
${NAS_SRC}COMMON/IES/EmmCause.c
${NAS_SRC}COMMON/IES/EpsAttachResult.c
${NAS_SRC}COMMON/IES/EpsAttachType.c
${NAS_SRC}COMMON/IES/EpsBearerContextStatus.c
${NAS_SRC}COMMON/IES/EpsBearerIdentity.c
${NAS_SRC}COMMON/IES/EpsMobileIdentity.c
${NAS_SRC}COMMON/IES/EpsNetworkFeatureSupport.c
${NAS_SRC}COMMON/IES/EpsQualityOfService.c
${NAS_SRC}COMMON/IES/EpsUpdateResult.c
${NAS_SRC}COMMON/IES/EpsUpdateType.c
${NAS_SRC}COMMON/IES/EsmCause.c
${NAS_SRC}COMMON/IES/EsmInformationTransferFlag.c
${NAS_SRC}COMMON/IES/EsmMessageContainer.c
${NAS_SRC}COMMON/IES/GprsTimer.c
${NAS_SRC}COMMON/IES/GutiType.c
${NAS_SRC}COMMON/IES/IdentityType2.c
${NAS_SRC}COMMON/IES/ImeisvRequest.c
${NAS_SRC}COMMON/IES/KsiAndSequenceNumber.c
${NAS_SRC}COMMON/IES/LcsClientIdentity.c
${NAS_SRC}COMMON/IES/LcsIndicator.c
${NAS_SRC}COMMON/IES/LinkedEpsBearerIdentity.c
${NAS_SRC}COMMON/IES/LlcServiceAccessPointIdentifier.c
${NAS_SRC}COMMON/IES/LocationAreaIdentification.c
${NAS_SRC}COMMON/IES/MessageType.c
${NAS_SRC}COMMON/IES/MobileIdentity.c
${NAS_SRC}COMMON/IES/MobileStationClassmark2.c
${NAS_SRC}COMMON/IES/MobileStationClassmark3.c
${NAS_SRC}COMMON/IES/MsNetworkCapability.c
${NAS_SRC}COMMON/IES/MsNetworkFeatureSupport.c
${NAS_SRC}COMMON/IES/NasKeySetIdentifier.c
${NAS_SRC}COMMON/IES/NasMessageContainer.c
${NAS_SRC}COMMON/IES/NasRequestType.c
${NAS_SRC}COMMON/IES/NasSecurityAlgorithms.c
${NAS_SRC}COMMON/IES/NetworkName.c
${NAS_SRC}COMMON/IES/Nonce.c
${NAS_SRC}COMMON/IES/PacketFlowIdentifier.c
${NAS_SRC}COMMON/IES/PagingIdentity.c
${NAS_SRC}COMMON/IES/PdnAddress.c
${NAS_SRC}COMMON/IES/PdnType.c
${NAS_SRC}COMMON/IES/PlmnList.c
${NAS_SRC}COMMON/IES/ProcedureTransactionIdentity.c
${NAS_SRC}COMMON/IES/ProtocolConfigurationOptions.c
${NAS_SRC}COMMON/IES/ProtocolDiscriminator.c
${NAS_SRC}COMMON/IES/PTmsiSignature.c
${NAS_SRC}COMMON/IES/QualityOfService.c
${NAS_SRC}COMMON/IES/RadioPriority.c
${NAS_SRC}COMMON/IES/SecurityHeaderType.c
${NAS_SRC}COMMON/IES/ServiceType.c
${NAS_SRC}COMMON/IES/ShortMac.c
${NAS_SRC}COMMON/IES/SsCode.c
${NAS_SRC}COMMON/IES/SupportedCodecList.c
${NAS_SRC}COMMON/IES/TimeZoneAndTime.c
${NAS_SRC}COMMON/IES/TimeZone.c
${NAS_SRC}COMMON/IES/TmsiStatus.c
${NAS_SRC}COMMON/IES/TrackingAreaIdentity.c
${NAS_SRC}COMMON/IES/TrackingAreaIdentityList.c
${NAS_SRC}COMMON/IES/TrafficFlowAggregateDescription.c
${NAS_SRC}COMMON/IES/TrafficFlowTemplate.c
${NAS_SRC}COMMON/IES/TransactionIdentifier.c
${NAS_SRC}COMMON/IES/UeNetworkCapability.c
${NAS_SRC}COMMON/IES/UeRadioCapabilityInformationUpdateNeeded.c
${NAS_SRC}COMMON/IES/UeSecurityCapability.c
${NAS_SRC}COMMON/IES/VoiceDomainPreferenceAndUeUsageSetting.c
)
set (libnas_utils_OBJS
${NAS_SRC}COMMON/UTIL/device.c
${NAS_SRC}COMMON/UTIL/memory.c
${NAS_SRC}COMMON/UTIL/nas_log.c
${NAS_SRC}COMMON/UTIL/nas_timer.c
${NAS_SRC}COMMON/UTIL/socket.c
${NAS_SRC}COMMON/UTIL/stty.c
${NAS_SRC}COMMON/UTIL/TLVEncoder.c
${NAS_SRC}COMMON/UTIL/TLVDecoder.c
${NAS_SRC}COMMON/UTIL/OctetString.c
)
if(NAS_UE)
set(libnas_ue_api_OBJS
${NAS_SRC}UE/API/USER/at_command.c
${NAS_SRC}UE/API/USER/at_error.c
${NAS_SRC}UE/API/USER/at_response.c
${NAS_SRC}UE/API/USER/user_api.c
${NAS_SRC}UE/API/USER/user_indication.c
${NAS_SRC}UE/API/USIM/aka_functions.c
${NAS_SRC}UE/API/USIM/usim_api.c
)
set(libnas_ue_emm_OBJS
${NAS_SRC}UE/EMM/Attach.c
${NAS_SRC}UE/EMM/Authentication.c
${NAS_SRC}UE/EMM/Detach.c
${NAS_SRC}UE/EMM/emm_main.c
${NAS_SRC}UE/EMM/EmmStatusHdl.c
${NAS_SRC}UE/EMM/Identification.c
${NAS_SRC}UE/EMM/IdleMode.c
${NAS_SRC}UE/EMM/LowerLayer.c
${NAS_SRC}UE/EMM/SecurityModeControl.c
${NAS_SRC}UE/EMM/ServiceRequestHdl.c
${NAS_SRC}UE/EMM/TrackingAreaUpdate.c
)
set(libnas_ue_emm_sap_OBJS
${NAS_SRC}UE/EMM/SAP/emm_as.c
${NAS_SRC}UE/EMM/SAP/EmmDeregisteredAttachNeeded.c
${NAS_SRC}UE/EMM/SAP/EmmDeregisteredAttemptingToAttach.c
${NAS_SRC}UE/EMM/SAP/EmmDeregistered.c
${NAS_SRC}UE/EMM/SAP/EmmDeregisteredInitiated.c
${NAS_SRC}UE/EMM/SAP/EmmDeregisteredLimitedService.c
${NAS_SRC}UE/EMM/SAP/EmmDeregisteredNoCellAvailable.c
${NAS_SRC}UE/EMM/SAP/EmmDeregisteredNoImsi.c
${NAS_SRC}UE/EMM/SAP/EmmDeregisteredNormalService.c
${NAS_SRC}UE/EMM/SAP/EmmDeregisteredPlmnSearch.c
${NAS_SRC}UE/EMM/SAP/emm_esm.c
${NAS_SRC}UE/EMM/SAP/emm_fsm.c
${NAS_SRC}UE/EMM/SAP/EmmNull.c
${NAS_SRC}UE/EMM/SAP/emm_recv.c
${NAS_SRC}UE/EMM/SAP/emm_reg.c
${NAS_SRC}UE/EMM/SAP/EmmRegisteredAttemptingToUpdate.c
${NAS_SRC}UE/EMM/SAP/EmmRegistered.c
${NAS_SRC}UE/EMM/SAP/EmmRegisteredImsiDetachInitiated.c
${NAS_SRC}UE/EMM/SAP/EmmRegisteredInitiated.c
${NAS_SRC}UE/EMM/SAP/EmmRegisteredLimitedService.c
${NAS_SRC}UE/EMM/SAP/EmmRegisteredNoCellAvailable.c
${NAS_SRC}UE/EMM/SAP/EmmRegisteredNormalService.c
${NAS_SRC}UE/EMM/SAP/EmmRegisteredPlmnSearch.c
${NAS_SRC}UE/EMM/SAP/EmmRegisteredUpdateNeeded.c
${NAS_SRC}UE/EMM/SAP/emm_sap.c
${NAS_SRC}UE/EMM/SAP/emm_send.c
${NAS_SRC}UE/EMM/SAP/EmmServiceRequestInitiated.c
${NAS_SRC}UE/EMM/SAP/EmmTrackingAreaUpdatingInitiated.c
)
set (libnas_ue_esm_OBJS
${NAS_SRC}UE/ESM/DedicatedEpsBearerContextActivation.c
${NAS_SRC}UE/ESM/DefaultEpsBearerContextActivation.c
${NAS_SRC}UE/ESM/EpsBearerContextDeactivation.c
${NAS_SRC}UE/ESM/esm_ebr.c
${NAS_SRC}UE/ESM/esm_ebr_context.c
${NAS_SRC}UE/ESM/esm_ip.c
${NAS_SRC}UE/ESM/esm_main.c
${NAS_SRC}UE/ESM/esm_pt.c
${NAS_SRC}UE/ESM/EsmStatusHdl.c
${NAS_SRC}UE/ESM/PdnConnectivity.c
${NAS_SRC}UE/ESM/PdnDisconnect.c
)
set(libnas_ue_esm_sap_OBJS
${NAS_SRC}UE/ESM/SAP/esm_recv.c
${NAS_SRC}UE/ESM/SAP/esm_send.c
${NAS_SRC}UE/ESM/SAP/esm_sap.c
)
add_library(LIB_NAS_UE
${NAS_SRC}UE/nas_itti_messaging.c
${NAS_SRC}UE/nas_network.c
${NAS_SRC}UE/nas_parser.c
${NAS_SRC}UE/nas_proc.c
${NAS_SRC}UE/nas_user.c
${libnas_api_OBJS}
${libnas_ue_api_OBJS}
${libnas_emm_msg_OBJS}
${libnas_esm_msg_OBJS}
${libnas_ies_OBJS}
${libnas_utils_OBJS}
${libnas_ue_emm_OBJS}
${libnas_ue_emm_sap_OBJS}
${libnas_ue_esm_OBJS}
${libnas_ue_esm_sap_OBJS}
)
set(NAS_UE_LIB LIB_NAS_UE)
include_directories(${NAS_SRC}UE)
include_directories(${NAS_SRC}UE/API/USER)
include_directories(${NAS_SRC}UE/API/USIM)
include_directories(${NAS_SRC}UE/EMM)
include_directories(${NAS_SRC}UE/EMM/SAP)
include_directories(${NAS_SRC}UE/ESM)
include_directories(${NAS_SRC}UE/ESM/SAP)
endif()
# Make lfds as a own source code (even if it is a outside library)
# For better intergration with compilation flags & structure of cmake
###################################################################
set(lfds ${OPENAIR2_DIR}/UTIL/LFDS/liblfds6.1.1/liblfds611/src/)
file(GLOB lfds_queue ${lfds}/lfds611_queue/*.c)
file(GLOB lfds_ring ${lfds}/lfds611_ringbuffer/*.c)
file(GLOB lfds_slist ${lfds}/lfds611_slist/*.c)
file(GLOB lfds_stack ${lfds}/lfds611_stack/*.c)
file(GLOB lfds_freelist ${lfds}/lfds611_freelist/*.c)
include_directories(${lfds})
add_library(LFDS
${lfds_queue} ${lfds_ring} ${lfds_slist} ${lfds_stack} ${lfds_freelist}
${lfds}/lfds611_liblfds/lfds611_liblfds_abstraction_test_helpers.c
${lfds}/lfds611_liblfds/lfds611_liblfds_aligned_free.c
${lfds}/lfds611_liblfds/lfds611_liblfds_aligned_malloc.c
${lfds}/lfds611_abstraction/lfds611_abstraction_free.c
${lfds}/lfds611_abstraction/lfds611_abstraction_malloc.c
)
# Simulation library
##########################
add_library(SIMU
${OPENAIR1_DIR}/SIMULATION/TOOLS/random_channel.c
${OPENAIR1_DIR}/SIMULATION/TOOLS/rangen_double.c
${OPENAIR1_DIR}/SIMULATION/TOOLS/taus.c
${OPENAIR1_DIR}/SIMULATION/TOOLS/multipath_channel.c
${OPENAIR1_DIR}/SIMULATION/TOOLS/abstraction.c
${OPENAIR1_DIR}/SIMULATION/TOOLS/multipath_tv_channel.c
${OPENAIR1_DIR}/SIMULATION/RF/rf.c
${OPENAIR1_DIR}/SIMULATION/RF/dac.c
${OPENAIR1_DIR}/SIMULATION/RF/adc.c
)
add_library(SIMU_ETH
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/netlink_init.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/multicast_link.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/socket.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/bypass_session_layer.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/emu_transport.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/pgm_link.c
)
add_library(OPENAIR0_LIB
${OPENAIR_TARGETS}/ARCH/EXMIMO/USERSPACE/LIB/openair0_lib.c
)
# System packages that are required
# We use either the cmake buildin, in ubuntu are in: /usr/share/cmake*/Modules/
# or cmake provide a generic interface to pkg-config that widely used
###################################
include(FindPkgConfig)
pkg_search_module(LIBXML2 libxml-2.0 REQUIRED)
include_directories(${LIBXML2_INCLUDE_DIRS})
pkg_search_module(OPENSSL openssl REQUIRED)
include_directories(${OPENSSL_INCLUDE_DIRS})
pkg_search_module(CONFIG libconfig REQUIRED)
include_directories(${CONFIG_INCLUDE_DIRS})
pkg_search_module(CRYPTO libcrypto REQUIRED)
include_directories(${CRYPTO_INCLUDE_DIRS})
#use native cmake method as this package is not in pkg-config
if (${RF_BOARD} STREQUAL "OAI_USRP")
find_package(Boost REQUIRED)
include_directories(${LIBBOOST_INCLUDE_DIR})
endif (${RF_BOARD} STREQUAL "OAI_USRP")
pkg_search_module(OPENPGM openpgm-5.1)
if(NOT ${OPENPGM_FOUND})
message("PACKAGE openpgm-5.1 is required by binaries such as oaisim: will fail later if this target is built")
else()
include_directories(${OPENPGM_INCLUDE_DIRS})
endif()
pkg_search_module(NETTLE nettle)
if(NOT ${NETTLE_FOUND})
message("PACKAGE nettle not found: some targets will fail")
else()
include_directories(${NETTLE_INCLUDE_DIRS})
endif()
pkg_search_module(XPM xpm)
if(NOT ${XPM_FOUND})
message("PACKAGE xpm not found: some targets will fail")
else()
include_directories(${XPM_INCLUDE_DIRS})
endif()
# Atlas is required by some packages, but not found in pkg-config
if(EXISTS "/usr/include/atlas/cblas.h")
include_directories("/usr/include/atlas")
list(APPEND ATLAS_LIBRARIES lapack cblas atlas)
else()
message("No Blas/Atlas libs found, some targets will fail")
endif()
if (${XFORMS})
include_directories ("/usr/include/X11")
set(XFORMS_SOURCE
${OPENAIR1_DIR}/PHY/TOOLS/lte_phy_scope.c
)
set(XFORMS_SOURCE_SOFTMODEM
${OPENAIR_TARGETS}/RT/USER/stats.c
)
set(XFORMS_LIBRARIES "forms")
endif (${XFORMS})
set(CMAKE_MODULE_PATH "${OPENAIR_DIR}/cmake_targets/tools/MODULES" "${CMAKE_MODULE_PATH}")
# Hack on a test of asn1c version (already dirty)
add_definitions(-DASN1_MINIMUM_VERSION=924)
#################################
# add executables for operation
#################################""
# lte-softmodem is both eNB and UE implementation
###################################################
add_executable(lte-softmodem
${rrc_h}
${s1ap_h}
${OPENAIR_BIN_DIR}/messages_xml.h
${OPENAIR_TARGETS}/RT/USER/sched_dlsch.c
${OPENAIR_TARGETS}/RT/USER/sched_rx_pdsch.c
${OPENAIR_TARGETS}/RT/USER/rt_wrapper.c
${OPENAIR_TARGETS}/RT/USER/lte-ue.c
${OPENAIR_TARGETS}/RT/USER/lte-softmodem.c
${OPENAIR1_DIR}/SIMULATION/TOOLS/taus.c
${OPENAIR_TARGETS}/SIMU/USER/init_lte.c
${OPENAIR_TARGETS}/COMMON/create_tasks.c
${OPENAIR_TARGETS}/ARCH/COMMON/common_lib.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/netlink_init.c
${OPENAIR3_DIR}/NAS/UE/nas_ue_task.c
${GTPU_need_ITTI}
${HW_SOURCE}
${RTAI_SOURCE}
${XFORMS_SOURCE}
${XFORMS_SOURCE_SOFTMODEM}
)
target_link_libraries (lte-softmodem
-Wl,--start-group
RRC_LIB S1AP_LIB S1AP_ENB GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS L2 ${MSC_LIB} ${RAL_LIB} ${NAS_UE_LIB} ${ITTI_LIB} ${MIH_LIB}
-Wl,--end-group )
target_link_libraries (lte-softmodem ${LIBXML2_LIBRARIES})
target_link_libraries (lte-softmodem pthread m ${CONFIG_LIBRARIES} rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} sctp ${option_HW_lib} ${XFORMS_LIBRARIES} )
target_link_libraries (lte-softmodem ${LIBBOOST_LIBRARIES})
# lte-softmodem-nos1 is both eNB and UE implementation
###################################################
add_executable(lte-softmodem-nos1
${rrc_h}
${s1ap_h}
${OPENAIR_BIN_DIR}/messages_xml.h
${OPENAIR_TARGETS}/RT/USER/sched_dlsch.c
${OPENAIR_TARGETS}/RT/USER/sched_rx_pdsch.c
${OPENAIR_TARGETS}/RT/USER/rt_wrapper.c
${OPENAIR_TARGETS}/RT/USER/lte-ue.c
${OPENAIR_TARGETS}/RT/USER/lte-softmodem.c
${OPENAIR1_DIR}/SIMULATION/TOOLS/taus.c
${OPENAIR_TARGETS}/SIMU/USER/init_lte.c
${OPENAIR_TARGETS}/COMMON/create_tasks.c
${OPENAIR_TARGETS}/ARCH/COMMON/common_lib.c
#${OPENAIR2_DIR}/RRC/NAS/nas_config.c # enable if you want rrc to mount ip interface
#${OPENAIR2_DIR}/RRC/NAS/rb_config.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/netlink_init.c
${HW_SOURCE}
${RTAI_SOURCE}
${XFORMS_SOURCE}
${XFORMS_SOURCE_SOFTMODEM}
)
target_link_libraries (lte-softmodem-nos1
-Wl,--start-group
RRC_LIB SECU_CN SECU_OSA UTIL HASHTABLE SCHED_LIB PHY LFDS L2 ${MSC_LIB} ${RAL_LIB} ${ITTI_LIB} ${MIH_LIB}
-Wl,--end-group )
target_link_libraries (lte-softmodem-nos1 ${LIBXML2_LIBRARIES})
target_link_libraries (lte-softmodem-nos1 pthread m ${CONFIG_LIBRARIES} rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${option_HW_lib} ${XFORMS_LIBRARIES} )
target_link_libraries (lte-softmodem-nos1 ${LIBBOOST_LIBRARIES})
# rrh
################################
set(DRIVER2013)
#Note: only on RF type is currently supported for RRH
add_executable(rrh_gw
${OPENAIR_TARGETS}/RT/USER/rrh_gw.c
${OPENAIR_TARGETS}/RT/USER/eNB_transport_IQ.c
${OPENAIR_TARGETS}/RT/USER/UE_transport_IQ.c
${OPENAIR_TARGETS}/RT/USER/rt_wrapper.c
${OPENAIR_TARGETS}/ARCH/COMMON/common_lib.c
${OPENAIR_TARGETS}/ARCH/ETHERNET/USERSPACE/LIB/ethernet_lib.c
${HW_SOURCE}
)
# assert and common_lib.h
target_include_directories(rrh_gw PRIVATE ${OPENAIR_DIR}/common/utils/itti ${OPENAIR_TARGETS}/ARCH/COMMON ${OPENAIR_TARGETS}/ARCH/ETHERNET/USERSPACE/LIB/ )
target_link_libraries(rrh_gw
-Wl,--start-group
UTIL LFDS
-Wl,--end-group )
target_link_libraries (rrh_gw rt pthread m )
target_link_libraries (rrh_gw ${option_HW_lib} ${LIBBOOST_LIBRARIES} )
#Message("-- default_HW_lib=ETHERNET") # only in case of RRH
Message("-- option_HW_lib=${option_HW_lib}")
Message("-- HW_SOURCE=${HW_SOURCE}")
# USIM process
#################
#add_executable(usim
# ${OPENAIR3_DIR}/NAS/TOOLS/usim_data.c
# ${OPENAIR3_DIR}/NAS/USER/API/USIM/usim_api.c
# ${OPENAIR3_DIR}/NAS/USER/API/USIM/aka_functions.c
# ${OPENAIR3_DIR}/NAS/COMMON/UTIL/memory.c
# ${OPENAIR3_DIR}/NAS/COMMON/UTIL/nas_log.c
# ${OPENAIR3_DIR}/NAS/COMMON/UTIL/OctetString.c
# ${OPENAIR3_DIR}/NAS/COMMON/UTIL/TLVEncoder.c
# )
#target_link_libraries (usim ${NAS_LIB} UTIL ${ITTI_LIB} LFDS pthread rt nettle crypto m)
# ???
#####################
#add_executable(nvram
# ${OPENAIR3_DIR}/NAS/TOOLS/ue_data.c
# ${OPENAIR3_DIR}/NAS/COMMON/UTIL/memory.c
# ${OPENAIR3_DIR}/NAS/COMMON/UTIL/nas_log.c
# )
#target_link_libraries (nvram LIB_NAS_UE UTIL ${ITTI_LIB} LFDS pthread rt nettle crypto m)
###################################"
# Addexecutables for tests
####################################
# A all in one network simulator
################
add_executable(oaisim
${rrc_h}
${s1ap_h}
${x2ap_h}
${OPENAIR_BIN_DIR}/messages_xml.h
${OPENAIR_TARGETS}/SIMU/USER/channel_sim.c
${OPENAIR_TARGETS}/SIMU/USER/init_lte.c
${OPENAIR_TARGETS}/SIMU/USER/oaisim_config.c
${OPENAIR_TARGETS}/SIMU/USER/sinr_sim.c
${OPENAIR_TARGETS}/SIMU/USER/cor_SF_sim.c
${OPENAIR_TARGETS}/SIMU/USER/oaisim_functions.c
${OPENAIR_TARGETS}/SIMU/USER/event_handler.c
${OPENAIR_TARGETS}/SIMU/USER/oaisim.c
${OPENAIR2_DIR}/RRC/NAS/nas_config.c
${OPENAIR2_DIR}/RRC/NAS/rb_config.c
${OPENAIR2_DIR}/UTIL/OMG/sumo.c
${OPENAIR3_DIR}/NAS/UE/nas_ue_task.c
${GTPU_need_ITTI}
${OPENAIR_TARGETS}/COMMON/create_tasks.c
${HW_SOURCE}
${XFORMS_SOURCE}
)
target_include_directories(oaisim PUBLIC ${OPENAIR_TARGETS}/SIMU/USER)
target_link_libraries (oaisim
-Wl,--start-group
RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB GTPV1U SECU_CN UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS ${MSC_LIB} L2 ${RAL_LIB} LIB_NAS_UE SIMU SIMU_ETH SECU_OSA ${ITTI_LIB} ${MIH_LIB}
-Wl,--end-group )
target_link_libraries (oaisim ${LIBXML2_LIBRARIES} ${LAPACK_LIBRARIES})
target_link_libraries (oaisim pthread m ${CONFIG_LIBRARIES} rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} sctp ${option_HW_lib}
${ATLAS_LIBRARIES} ${XFORMS_LIBRARIES} ${OPENPGM_LIBRARIES})
#Force link with forms, regardless XFORMS option
target_link_libraries (oaisim forms)
# A all in one network simulator
################
add_executable(oaisim_nos1
${rrc_h}
${s1ap_h}
${x2ap_h}
${OPENAIR_BIN_DIR}/messages_xml.h
${OPENAIR_TARGETS}/SIMU/USER/channel_sim.c
${OPENAIR_TARGETS}/SIMU/USER/init_lte.c
${OPENAIR_TARGETS}/SIMU/USER/oaisim_config.c
${OPENAIR_TARGETS}/SIMU/USER/sinr_sim.c
${OPENAIR_TARGETS}/SIMU/USER/cor_SF_sim.c
${OPENAIR_TARGETS}/SIMU/USER/oaisim_functions.c
${OPENAIR_TARGETS}/SIMU/USER/event_handler.c
${OPENAIR_TARGETS}/SIMU/USER/oaisim.c
${OPENAIR2_DIR}/RRC/NAS/nas_config.c
${OPENAIR2_DIR}/RRC/NAS/rb_config.c
${OPENAIR2_DIR}/UTIL/OMG/sumo.c
${OPENAIR_TARGETS}/COMMON/create_tasks.c
${HW_SOURCE}
${XFORMS_SOURCE}
)
target_include_directories(oaisim_nos1 PUBLIC ${OPENAIR_TARGETS}/SIMU/USER)
target_link_libraries (oaisim_nos1
-Wl,--start-group
RRC_LIB X2AP_LIB SECU_CN UTIL HASHTABLE SCHED_LIB PHY LFDS ${MSC_LIB} L2 ${RAL_LIB} SIMU SIMU_ETH SECU_OSA ${ITTI_LIB} ${MIH_LIB}
-Wl,--end-group )
target_link_libraries (oaisim_nos1 ${LIBXML2_LIBRARIES} ${LAPACK_LIBRARIES})
target_link_libraries (oaisim_nos1 pthread m ${CONFIG_LIBRARIES} rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${option_HW_lib}
${ATLAS_LIBRARIES} ${XFORMS_LIBRARIES} ${OPENPGM_LIBRARIES})
#Force link with forms, regardless XFORMS option
target_link_libraries (oaisim_nos1 forms)
# Unitary tests for each piece of L1: example, mbmssim is MBMS L1 simulator
#####################################
foreach(myExe dlsim ulsim pbchsim scansim mbmssim pdcchsim pucchsim prachsim syncsim)
add_executable(${myExe}
${OPENAIR_BIN_DIR}/messages_xml.h
${OPENAIR1_DIR}/SIMULATION/LTE_PHY/${myExe}.c
${XFORMS_SOURCE}
)
target_link_libraries (${myExe}
-Wl,--start-group SIMU UTIL SCHED_LIB PHY LFDS ${ITTI_LIB} -Wl,--end-group
pthread m rt ${CONFIG_LIBRARIES} ${ATLAS_LIBRARIES} ${XFORMS_LIBRARIES}
)
endforeach(myExe)
add_executable(test_epc_generate_scenario
${OPENAIR3_DIR}/TEST/EPC_TEST/generate_scenario.c
${OPENAIR2_DIR}/ENB_APP/enb_config.h
${OPENAIR2_DIR}/COMMON/commonDef.h
${OPENAIR2_DIR}/COMMON/messages_def.h
${OPENAIR2_DIR}/COMMON/messages_types.h
${OPENAIR3_DIR}/S1AP/s1ap_eNB_defs.h
${OPENAIR_BIN_DIR}/messages_xml.h
)
target_link_libraries (test_epc_generate_scenario
-Wl,--start-group RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB GTPV1U LIB_NAS_UE SECU_CN UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS ${MSC_LIB} L2 -Wl,--end-group pthread m rt crypt sctp ${LIBXML2_LIBRARIES} ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${CONFIG_LIBRARIES}
)
#unitary tests for Core NEtwork pieces
#################################
foreach(myExe s1ap
secu_knas_encrypt_eia1
secu_kenb
aes128_ctr_encrypt
aes128_ctr_decrypt
secu_knas_encrypt_eea2
secu_knas secu_knas_encrypt_eea1
kdf
aes128_cmac_encrypt
secu_knas_encrypt_eia2)
add_executable(test_${myExe}
${OPENAIR3_DIR}/TEST/test_util.c
${OPENAIR3_DIR}/TEST/test_${myExe}.c
)
target_link_libraries (test_${myExe}
-Wl,--start-group SECU_CN UTIL LFDS -Wl,--end-group m rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${CONFIG_LIBRARIES}
)
endforeach(myExe)
# to be added
#../targets/TEST/PDCP/test_pdcp.c
#../targets/TEST/PDCP/with_rlc/test_pdcp_rlc.c
##################################################
# Generated specific cases is not regular code
###############################################
##################""
# itti symbolic debug print require to generate a specific include file
########################################
# retrieve the compiler options to send it to gccxml
get_directory_property( DirDefs COMPILE_DEFINITIONS )
foreach( d ${DirDefs} )
list(APPEND itti_compiler_options "-D${d}")
endforeach()
get_directory_property( DirDefs INCLUDE_DIRECTORIES )
foreach( d ${DirDefs} )
list(APPEND itti_compiler_options "-I${d}")
endforeach()
set (ITTI_H ${ITTI_DIR}/intertask_interface_types.h)
add_custom_command (
OUTPUT ${OPENAIR_BIN_DIR}/messages.xml
COMMAND gccxml ${itti_compiler_options} -fxml=${OPENAIR_BIN_DIR}/messages.xml ${ITTI_H}
DEPENDS ${S1AP_OAI_generated} ${RRC_FULL_DIR}/asn1_constants.h
)
add_custom_command (
OUTPUT ${OPENAIR_BIN_DIR}/messages_xml.h
COMMAND sed -e 's/ *//' -e 's/\"/\\\\\"/g' -e 's/^/\"/' -e 's/$$/\\\\n\"/' ${OPENAIR_BIN_DIR}/messages.xml > ${OPENAIR_BIN_DIR}/messages_xml.h
DEPENDS ${OPENAIR_BIN_DIR}/messages.xml ${RRC_FULL_DIR}/asn1_constants.h
)
################
# Kernel modules
###############
# Set compiler options for kernel modules
# we need to get out cmake to use the regular Linux Kernel process
# this is documented as https://www.kernel.org/doc/Documentation/kbuild/modules.txt
######################################
# retrieve the compiler options to send it to gccxml
get_directory_property(DirDefs COMPILE_DEFINITIONS )
foreach( d ${DirDefs} )
set(module_cc_opt_tmp "${module_cc_opt_tmp} -D${d}")
endforeach()
string(REPLACE "-DUSER_MODE" "" module_cc_opt ${module_cc_opt_tmp})
get_directory_property( DirDefs INCLUDE_DIRECTORIES )
foreach( d ${DirDefs} )
set(module_cc_opt "${module_cc_opt} -I${d}")
endforeach()
EXECUTE_PROCESS(COMMAND uname -r
OUTPUT_VARIABLE os_release
OUTPUT_STRIP_TRAILING_WHITESPACE)
SET(module_build_path /lib/modules/${os_release}/build)
function(make_driver name dir)
file(MAKE_DIRECTORY ${OPENAIR_BIN_DIR}/${name})
foreach(f IN ITEMS ${ARGN})
list(APPEND src_path_list ${dir}/${f})
string(REGEX REPLACE "c *$" "o" obj ${f})
set(objs "${objs} ${obj}")
endforeach()
CONFIGURE_FILE(${OPENAIR_CMAKE}/tools/Kbuild.cmake ${OPENAIR_BIN_DIR}/${name}/Kbuild)
add_custom_command(OUTPUT ${name}.ko
COMMAND make -C ${module_build_path} M=${OPENAIR_BIN_DIR}/${name}
WORKING_DIRECTORY ${OPENAIR_BIN_DIR}/${name}
COMMENT "building ${module}.ko"
VERBATIM
SOURCES ${src_path_list}
)
add_custom_target(${name} DEPENDS ${name}.ko)
endfunction(make_driver name dir src)
# nashmesh module
################
list(APPEND nasmesh_src device.c common.c ioctl.c classifier.c tool.c mesh.c)
# Actually nasty stuff to be FIXED: the hereafter flag is for RTAI compilation in the driver,
# but has different meaning in the other parts of the code
# We should change the constant name to xxx_RTAI or likely
if(NOT ${module_cc_opt} MATCHES "DRTAI")
set(module_cc_opt "${module_cc_opt} -DNAS_NETLINK")
else()
string(REPLACE "-DNAS_NETLINK" "" tmp "${module_cc_opt}")
set(module_cc_opt ${tmp})
endif()
# legacy Makefile was using NAS_NETLINK flag, but other drivers the hereafter flag
# so, this cmake use OAI_NW_DRIVER_USE_NETLINK everywhere
if (OAI_NW_DRIVER_USE_NETLINK)
list(APPEND nasmesh_src netlink.c)
endif()
make_driver(nasmesh ${OPENAIR2_DIR}/NETWORK_DRIVER/MESH ${nasmesh_src})
# user space tool for configuring MESH IP driver
################
add_executable(rb_tool
${OPENAIR2_DIR}/NETWORK_DRIVER/MESH/constant.h
${OPENAIR2_DIR}/NETWORK_DRIVER/MESH/ioctl.h
${OPENAIR2_DIR}/NETWORK_DRIVER/MESH/rrc_nas_primitives.h
${OPENAIR2_DIR}/NETWORK_DRIVER/MESH/RB_TOOL/rb_tool.c
)
target_include_directories(rb_tool PRIVATE ${OPENAIR2_DIR}/NETWORK_DRIVER/MESH/)
# ???
####################
list(APPEND oai_nw_drv_src device.c common.c ioctl.c classifier.c tool.c)
if(OAI_NW_DRIVER_USE_NETLINK)
list(APPEND oai_nw_drv_src netlink.c)
endif()
make_driver(oai_nw_drv ${OPENAIR2_DIR}/NETWORK_DRIVER/LITE ${oai_nw_drv_src})
# Exmimo board drivers
#########################
list(APPEND openair_rf_src module_main.c irq.c fileops.c exmimo_fw.c)
make_driver(openair_rf ${OPENAIR_TARGETS}/ARCH/EXMIMO/DRIVER/eurecom ${openair_rf_src})
add_executable(updatefw
${OPENAIR_TARGETS}/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw.c
)
# ue_ip: purpose ???
###############
list(APPEND ue_ip_src device.c common.c)
if(OAI_NW_DRIVER_USE_NETLINK)
list(APPEND ue_ip_src netlink.c)
endif()
make_driver(ue_ip ${OPENAIR2_DIR}/NETWORK_DRIVER/UE_IP ${ue_ip_src})
# OCTAVE tools
###############
set(OCT_INCL -I${OPENAIR_TARGETS}/ARCH/EXMIMO/DEFS -I${OPENAIR_TARGETS}/ARCH/EXMIMO/USERSPACE/LIB -I${OPENAIR_TARGETS}/ARCH/COMMON)
set(OCT_LIBS -L${CMAKE_CURRENT_BINARY_DIR} -lm -lOPENAIR0_LIB)
set(OCT_FLAGS -DEXMIMO)
set(OCT_DIR ${OPENAIR_TARGETS}/ARCH/EXMIMO/USERSPACE/OCTAVE)
set(OCT_FILES
oarf_config_exmimo.oct
oarf_config_exmimo.oct
oarf_get_frame.oct
oarf_stop.oct
oarf_send_frame.oct
oarf_get_num_detected_cards.oct
oarf_stop_without_reset.oct
)
foreach(file IN ITEMS ${OCT_FILES})
string(REGEX REPLACE "oct *$" "cc" src ${file})
add_custom_command(
OUTPUT ${file}
DEPENDS ${OCT_DIR}/${src} OPENAIR0_LIB
COMMAND mkoctfile
ARGS ${OCT_FLAGS} ${OCT_INCL} ${OCT_LIBS}
ARGS -o ${file} ${OCT_DIR}/${src}
COMMENT "Generating ${file}"
VERBATIM
)
endforeach(file)
ADD_CUSTOM_TARGET(oarf
DEPENDS ${OCT_FILES}
)
#CMAKE INSTALL and CPACK
#INSTALL(PROGRAMS lte-softmodem ${OPENAIR_DIR}/targets DESTINATION bin)
#INSTALL(PROGRAMS oaisim ${OPENAIR_DIR}/targets DESTINATION bin)
#SET(CPACK_PACKAGE_DESCRIPTION_SUMMARY "OpenAirInterface")
#SET(CPACK_PACKAGE_VENDOR "Eurecom")
#SET(CPACK_PACKAGE_DESCRIPTION_FILE "${OPENAIR_DIR}/README.txt")
#SET(CPACK_RESOURCE_FILE_LICENSE "${OPENAIR_DIR}/COPYING")
#SET(CPACK_PACKAGE_VERSION_MAJOR "1")
#SET(CPACK_PACKAGE_VERSION_MINOR "1")
#SET(CPACK_PACKAGE_VERSION_PATCH "1")
#SET(CPACK_PACKAGE_INSTALL_DIRECTORY "CMake ${CMake_VERSION_MAJOR}.${CMake_VERSION_MINOR}")
#SET(CPACK_STRIP_FILES "${OPENAIR_TARGETS}/bin")
#SET(CPACK_SOURCE_STRIP_FILES "")
##debian specific
#SET(CPACK_DEBIAN_PACKAGE_NAME "OAI")
#SET(CPACK_DEBIAN_PACKAGE_VERSION "${CMake_VERSION_MAJOR}.${CMake_VERSION_MINOR}")
##dpkg --print-architecture (do not use i686
#SET(CPACK_DEBIAN_PACKAGE_ARCHITECTURE "amd64")
#SET(CPACK_DEBIAN_PACKAGE_DEPENDS "libc6 (>= 2.3.1-6), libgcc1 (>= 1:3.4.2-12)")
#SET(CPACK_DEBIAN_PACKAGE_DEPENDS "libpthread.so.0 libm.so.6 libconfig.so.9 librt.so.1 libcrypt.so.1 libcrypto.so.1.0.0 libnettle.so.4 libsctp.so.1 libc.so.6")
#SET(CPACK_DEBIAN_PACKAGE_MAINTAINER "EURECOM-OSA")
#SET(CPACK_PACKAGE_EXECUTABLES "lte-softmodem" "mme_gw.Rel10" "openair-hss")
#SET(CPACK_DEBIAN_PACKAGE_DESCRIPTION "OpenAirInterface")
#SET(CPACK_DEBIAN_PACKAGE_Section "Beta-Release")
#INCLUDE(CPack)
Reference in New Issue View Git Blame Copy Permalink