maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
2a979f4e2fcbd586b57cb03abf93b3a09cf4c29a
openairinterface5g/executables/softmodem-common.h
T
Melissa Elkadi 9b16c1d860 Merge branch 'eurecom-develop' into episys/merge_nsa_w_develop 
At this point we are successfully able to build.
Additionally, we can run the scenario,
however, it does not pass. It seems that the gNB
is not connecting to the proxy correctly. Just
wanted to push the progress so far. FYI, the items
that had to be changed to correct the linking issues
were the following:

 - mac_rrc_data_ind_ue vs. nr_mac_rrc_data_ind_ue
 - rrc_data_req vs. nr_rrc_data_req
 - mac_rrc_data_req_ue vs. nr_mac_rrc_data_req_ue
 - rrc_data_req_ue vs. rrc_data_req_nr_ue
 - rrc_data_req vs. nr_rrc_data_req

The listed functions should be declard in the LTE/NR
UE directory depending on the functionality. Several
were mixed. i.e.: LTE functions being called in NR UE.

Also, removing siWindowLength, siWindowLength_int,
SIBType, SIBPeriod, and siPeriod_int from the NR UE RRC.
These variable were not used in the NR UE and are defined
for LTE only.

Lastly, in the NR_IF_Module.c of the NR UE, the global
variable def_dci_pdu_rel15 is not accessible. Need to
revisit this. For not it is commented out.
2021-08-11 10:23:42 -07:00

282 lines
19 KiB
C
Raw Blame History

/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
/*! \file lte-softmodem-common.h
* \brief Top-level threads for eNodeB
* \author
* \date 2012
* \version 0.1
* \company Eurecom
* \email:
* \note
* \warning
*/
#ifndef SOFTMODEM_COMMON_H
#define SOFTMODEM_COMMON_H
#include "openair1/PHY/defs_common.h"
#ifdef __cplusplus
extern "C"
{
#endif
/* help strings definition for command line options, used in CMDLINE_XXX_DESC macros and printed when -h option is used */
#define CONFIG_HLP_RFCFGF "Configuration file for front-end (e.g. LMS7002M)\n"
#define CONFIG_HLP_SPLIT73 "Split 7.3 (below rate matching) option: <cu|du>:<remote ip address>:<remote port>"
#define CONFIG_HLP_TPOOL "Thread pool configuration: \n\
default no pool (runs in calling thread),\n\
list of cores, comma separated (negative value is no core affinity)\n\
example: -1,3 launches two working threads one floating, the second set on core 3"
#define CONFIG_HLP_ULMAXE "set the eNodeB max ULSCH erros\n"
#define CONFIG_HLP_CALUER "set UE RX calibration\n"
#define CONFIG_HLP_CALUERM ""
#define CONFIG_HLP_CALUERB ""
#define CONFIG_HLP_DBGUEPR "UE run normal prach power ramping, but don't continue random-access\n"
#define CONFIG_HLP_CALPRACH "UE run normal prach with maximum power, but don't continue random-access\n"
#define CONFIG_HLP_NOL2CN "bypass L2 and upper layers\n"
#define CONFIG_HLP_DUMPFRAME "dump UE received frame to rxsig_frame0.dat and exit\n"
#define CONFIG_HLP_UELOOP "get softmodem (UE) to loop through memory instead of acquiring from HW\n"
#define CONFIG_HLP_PHYTST "test UE phy layer, mac disabled\n"
#define CONFIG_HLP_DORA "test gNB and UE with RA procedures\n"
#define CONFIG_HLP_SA "run gNB in standalone mode\n"
#define CONFIG_HLP_EXTS "tells hardware to use an external timing reference\n"
#define CONFIG_HLP_DMRSSYNC "tells RU to insert DMRS in subframe 1 slot 0"
#define CONFIG_HLP_CLK "tells hardware to use a clock reference (0:internal, 1:external, 2:gpsdo)\n"
#define CONFIG_HLP_TME "tells hardware to use a time reference (0:internal, 1:external, 2:gpsdo)\n"
#define CONFIG_HLP_USIM "use XOR autentication algo in case of test usim mode\n"
#define CONFIG_HLP_NOSNGLT "Disables single-thread mode in lte-softmodem\n"
#define CONFIG_HLP_DLF "Set the downlink frequency for all component carriers\n"
#define CONFIG_HLP_ULF "Set the uplink frequency offset for all component carriers\n"
#define CONFIG_HLP_CHOFF "Channel id offset\n"
#define CONFIG_HLP_SOFTS "Enable soft scope and L1 and L2 stats (Xforms)\n"
#define CONFIG_HLP_EXMCAL "Calibrate the EXMIMO borad, available files: exmimo2_2arxg.lime exmimo2_2brxg.lime \n"
#define CONFIG_HLP_ITTIL "Generate ITTI analyzser logs (similar to wireshark logs but with more details)\n"
#define CONFIG_HLP_DLMCS "Set the maximum downlink MCS\n"
#define CONFIG_HLP_STMON "Enable processing timing measurement of lte softmodem on per subframe basis \n"
#define CONFIG_HLP_256QAM "Use the 256 QAM mcs table for PDSCH\n"
#define CONFIG_HLP_NONSTOP "Go back to frame sync mode after 100 consecutive PBCH failures\n"
//#define CONFIG_HLP_NUMUES "Set the number of UEs for the emulation"
#define CONFIG_HLP_MSLOTS "Skip the missed slots/subframes \n"
#define CONFIG_HLP_ULMCS "Set the maximum uplink MCS\n"
#define CONFIG_HLP_UE "Set the lte softmodem as a UE\n"
#define CONFIG_HLP_TQFS "Apply three-quarter of sampling frequency, 23.04 Msps to reduce the data rate on USB/PCIe transfers (only valid for 20 MHz)\n"
#define CONFIG_HLP_TPORT "tracer port\n"
#define CONFIG_HLP_NOTWAIT "don't wait for tracer, start immediately\n"
#define CONFIG_HLP_TNOFORK "to ease debugging with gdb\n"
#define CONFIG_HLP_NUMEROLOGY "adding numerology for 5G\n"
#define CONFIG_HLP_BAND "band index\n"
#define CONFIG_HLP_EMULATE_RF "Emulated RF enabled(disable by defult)\n"
#define CONFIG_HLP_PARALLEL_CMD "three config for level of parallelism 'PARALLEL_SINGLE_THREAD', 'PARALLEL_RU_L1_SPLIT', or 'PARALLEL_RU_L1_TRX_SPLIT'\n"
#define CONFIG_HLP_WORKER_CMD "two option for worker 'WORKER_DISABLE' or 'WORKER_ENABLE'\n"
#define CONFIG_HLP_USRP_THREAD "having extra thead for usrp tx\n"
#define CONFIG_HLP_NOS1 "Disable s1 interface\n"
#define CONFIG_HLP_RFSIM "Run in rf simulator mode (also known as basic simulator)\n"
#define CONFIG_HLP_NOKRNMOD "(noS1 only): Use tun instead of namesh module \n"
#define CONFIG_HLP_DISABLNBIOT "disable nb-iot, even if defined in config\n"
#define CONFIG_HLP_USRP_THREAD "having extra thead for usrp tx\n"
#define CONFIG_HLP_NFAPI "Change the nFAPI mode for NR\n"
/*-----------------------------------------------------------------------------------------------------------------------------------------------------*/
/* command line parameters common to eNodeB and UE */
/* optname helpstr paramflags XXXptr defXXXval type numelt */
/*-----------------------------------------------------------------------------------------------------------------------------------------------------*/
#define RF_CONFIG_FILE softmodem_params.rf_config_file
#define SPLIT73 softmodem_params.split73
#define TP_CONFIG softmodem_params.threadPoolConfig
#define PHY_TEST softmodem_params.phy_test
#define DO_RA softmodem_params.do_ra
#define SA softmodem_params.sa
#define WAIT_FOR_SYNC softmodem_params.wait_for_sync
#define SINGLE_THREAD_FLAG softmodem_params.single_thread_flag
#define CHAIN_OFFSET softmodem_params.chain_offset
#define NUMEROLOGY softmodem_params.numerology
#define BAND softmodem_params.band
#define EMULATE_RF softmodem_params.emulate_rf
#define CLOCK_SOURCE softmodem_params.clock_source
#define TIMING_SOURCE softmodem_params.timing_source
#define SEND_DMRSSYNC softmodem_params.send_dmrs_sync
#define USIM_TEST softmodem_params.usim_test
#define USE_256QAM_TABLE softmodem_params.use_256qam_table
#define NFAPI softmodem_params.nfapi
#define NSA softmodem_params.nsa
#define NODE_NUMBER softmodem_params.node_number
#define NON_STOP softmodem_params.non_stop
#define DEFAULT_RFCONFIG_FILE "/usr/local/etc/syriq/ue.band7.tm1.PRB100.NR40.dat";
extern int usrp_tx_thread;
#define CMDLINE_PARAMS_DESC { \
{"rf-config-file", CONFIG_HLP_RFCFGF, 0, strptr:(char **)&RF_CONFIG_FILE, defstrval:NULL, TYPE_STRING, sizeof(RF_CONFIG_FILE)},\
{"split73", CONFIG_HLP_SPLIT73, 0, strptr:(char **)&SPLIT73, defstrval:NULL, TYPE_STRING, sizeof(SPLIT73)}, \
{"thread-pool", CONFIG_HLP_TPOOL, 0, strptr:(char **)&TP_CONFIG, defstrval:"n", TYPE_STRING, sizeof(TP_CONFIG)}, \
{"phy-test", CONFIG_HLP_PHYTST, PARAMFLAG_BOOL, iptr:&PHY_TEST, defintval:0, TYPE_INT, 0}, \
{"do-ra", CONFIG_HLP_DORA, PARAMFLAG_BOOL, iptr:&DO_RA, defintval:0, TYPE_INT, 0}, \
{"sa", CONFIG_HLP_SA, PARAMFLAG_BOOL, iptr:&SA, defintval:0, TYPE_INT, 0}, \
{"usim-test", CONFIG_HLP_USIM, PARAMFLAG_BOOL, u8ptr:&USIM_TEST, defintval:0, TYPE_UINT8, 0}, \
{"clock-source", CONFIG_HLP_CLK, 0, uptr:&CLOCK_SOURCE, defintval:0, TYPE_UINT, 0}, \
{"time-source", CONFIG_HLP_TME, 0, uptr:&TIMING_SOURCE, defintval:0, TYPE_UINT, 0}, \
{"wait-for-sync", NULL, PARAMFLAG_BOOL, iptr:&WAIT_FOR_SYNC, defintval:0, TYPE_INT, 0}, \
{"single-thread-enable", CONFIG_HLP_NOSNGLT, PARAMFLAG_BOOL, iptr:&SINGLE_THREAD_FLAG, defintval:0, TYPE_INT, 0}, \
{"C" , CONFIG_HLP_DLF, 0, u64ptr:&(downlink_frequency[0][0]), defuintval:3619200000, TYPE_UINT64, 0}, \
{"CO" , CONFIG_HLP_ULF, 0, iptr:&(uplink_frequency_offset[0][0]), defintval:0, TYPE_INT, 0}, \
{"a" , CONFIG_HLP_CHOFF, 0, iptr:&CHAIN_OFFSET, defintval:0, TYPE_INT, 0}, \
{"d" , CONFIG_HLP_SOFTS, PARAMFLAG_BOOL, uptr:(uint32_t *)&do_forms, defintval:0, TYPE_INT8, 0}, \
{"q" , CONFIG_HLP_STMON, PARAMFLAG_BOOL, iptr:&opp_enabled, defintval:0, TYPE_INT, 0}, \
{"numerology" , CONFIG_HLP_NUMEROLOGY, PARAMFLAG_BOOL, iptr:&NUMEROLOGY, defintval:1, TYPE_INT, 0}, \
{"band" , CONFIG_HLP_BAND, PARAMFLAG_BOOL, iptr:&BAND, defintval:78, TYPE_INT, 0}, \
{"emulate-rf" , CONFIG_HLP_EMULATE_RF, PARAMFLAG_BOOL, iptr:&EMULATE_RF, defintval:0, TYPE_INT, 0}, \
{"parallel-config", CONFIG_HLP_PARALLEL_CMD, 0, strptr:(char **)&parallel_config, defstrval:NULL, TYPE_STRING, 0}, \
{"worker-config", CONFIG_HLP_WORKER_CMD, 0, strptr:(char **)&worker_config, defstrval:NULL, TYPE_STRING, 0}, \
{"noS1", CONFIG_HLP_NOS1, PARAMFLAG_BOOL, uptr:&noS1, defintval:0, TYPE_INT, 0}, \
{"rfsim", CONFIG_HLP_RFSIM, PARAMFLAG_BOOL, uptr:&rfsim, defintval:0, TYPE_INT, 0}, \
{"basicsim", CONFIG_HLP_RFSIM, PARAMFLAG_BOOL, uptr:&basicsim, defintval:0, TYPE_INT, 0}, \
{"nokrnmod", CONFIG_HLP_NOKRNMOD, PARAMFLAG_BOOL, uptr:&nokrnmod, defintval:0, TYPE_INT, 0}, \
{"nbiot-disable", CONFIG_HLP_DISABLNBIOT, PARAMFLAG_BOOL, uptr:&nonbiot, defuintval:0, TYPE_INT, 0}, \
{"use-256qam-table", CONFIG_HLP_256QAM, PARAMFLAG_BOOL, iptr:&USE_256QAM_TABLE, defintval:0, TYPE_INT, 0}, \
{"nsa", CONFIG_HLP_NSA, PARAMFLAG_BOOL, iptr:&NSA, defintval:0, TYPE_INT, 0}, \
{"node-number", NULL, 0, u16ptr:&NODE_NUMBER, defuintval:0, TYPE_UINT16, 0}, \
{"usrp-tx-thread-config", CONFIG_HLP_USRP_THREAD, 0, iptr:&usrp_tx_thread, defstrval:0, TYPE_INT, 0}, \
{"nfapi", CONFIG_HLP_NFAPI, 0, u8ptr:&nfapi_mode, defintval:0, TYPE_UINT8, 0}, \
{"non-stop", CONFIG_HLP_NONSTOP, PARAMFLAG_BOOL, iptr:&NON_STOP, defintval:0, TYPE_INT, 0}, \
}
#define CONFIG_HLP_NSA "Enable NSA mode \n"
#define CONFIG_HLP_FLOG "Enable online log \n"
#define CONFIG_HLP_LOGL "Set the global log level, valid options: (4:trace, 3:debug, 2:info, 1:warn, (0:error))\n"
#define CONFIG_HLP_LOGV "Set the global log verbosity \n"
#define CONFIG_HLP_TELN "Start embedded telnet server \n"
#define CONFIG_HLP_MSC "Enable the MSC tracing utility \n"
#define CONFIG_FLOG_OPT "R"
#define CONFIG_LOGL_OPT "g"
/*-------------------------------------------------------------------------------------------------------------------------------------------------*/
/* command line parameters for LOG utility */
/* optname helpstr paramflags XXXptr defXXXval type numelt */
/*-------------------------------------------------------------------------------------------------------------------------------------------------*/
#define START_MSC softmodem_params.start_msc
#define CMDLINE_LOGPARAMS_DESC { \
{CONFIG_FLOG_OPT , CONFIG_HLP_FLOG, 0, uptr:&online_log_messages, defintval:1, TYPE_INT, 0}, \
{CONFIG_LOGL_OPT , CONFIG_HLP_LOGL, 0, uptr:&glog_level, defintval:0, TYPE_UINT, 0}, \
{"telnetsrv", CONFIG_HLP_TELN, PARAMFLAG_BOOL, uptr:&start_telnetsrv, defintval:0, TYPE_UINT, 0}, \
{"msc", CONFIG_HLP_MSC, PARAMFLAG_BOOL, uptr:&START_MSC, defintval:0, TYPE_UINT, 0}, \
{"log-mem", NULL, 0, strptr:(char **)&logmem_filename, defstrval:NULL, TYPE_STRING, 0}, \
{"telnetclt", NULL, 0, uptr:&start_telnetclt, defstrval:NULL, TYPE_UINT, 0}, \
}
/* check function for global log level */
#define CMDLINE_LOGPARAMS_CHECK_DESC { \
{ .s5= {NULL} } , \
{ .s2= {config_check_intrange, {0,4}}}, \
{ .s5= {NULL} } , \
{ .s5= {NULL} } , \
{ .s5= {NULL} } , \
{ .s5= {NULL} } , \
}
/***************************************************************************************************************************************/
#define SOFTMODEM_NOS1_BIT (1<<0)
#define SOFTMODEM_NOKRNMOD_BIT (1<<1)
#define SOFTMODEM_NONBIOT_BIT (1<<2)
#define SOFTMODEM_RFSIM_BIT (1<<10)
#define SOFTMODEM_BASICSIM_BIT (1<<11)
#define SOFTMODEM_SIML1_BIT (1<<12)
#define SOFTMODEM_DOSCOPE_BIT (1<<15)
#define SOFTMODEM_RECPLAY_BIT (1<<16)
#define SOFTMODEM_TELNETCLT_BIT (1<<17)
#define SOFTMODEM_ENB_BIT (1<<20)
#define SOFTMODEM_GNB_BIT (1<<21)
#define SOFTMODEM_4GUE_BIT (1<<22)
#define SOFTMODEM_5GUE_BIT (1<<23)
#define SOFTMODEM_FUNC_BITS (SOFTMODEM_ENB_BIT | SOFTMODEM_GNB_BIT | SOFTMODEM_5GUE_BIT | SOFTMODEM_4GUE_BIT)
#define MAPPING_SOFTMODEM_FUNCTIONS {{"enb",SOFTMODEM_ENB_BIT},{"gnb",SOFTMODEM_GNB_BIT},{"4Gue",SOFTMODEM_4GUE_BIT},{"5Gue",SOFTMODEM_5GUE_BIT}}
#define IS_SOFTMODEM_NOS1 ( get_softmodem_optmask() & SOFTMODEM_NOS1_BIT)
#define IS_SOFTMODEM_NOKRNMOD ( get_softmodem_optmask() & SOFTMODEM_NOKRNMOD_BIT)
#define IS_SOFTMODEM_NONBIOT ( get_softmodem_optmask() & SOFTMODEM_NONBIOT_BIT)
#define IS_SOFTMODEM_RFSIM ( get_softmodem_optmask() & SOFTMODEM_RFSIM_BIT)
#define IS_SOFTMODEM_BASICSIM ( get_softmodem_optmask() & SOFTMODEM_BASICSIM_BIT)
#define IS_SOFTMODEM_SIML1 ( get_softmodem_optmask() & SOFTMODEM_SIML1_BIT)
#define IS_SOFTMODEM_DOSCOPE ( get_softmodem_optmask() & SOFTMODEM_DOSCOPE_BIT)
#define IS_SOFTMODEM_IQPLAYER ( get_softmodem_optmask() & SOFTMODEM_RECPLAY_BIT)
#define IS_SOFTMODEM_TELNETCLT_BIT ( get_softmodem_optmask() & SOFTMODEM_TELNETCLT_BIT)
#define IS_SOFTMODEM_ENB_BIT ( get_softmodem_optmask() & SOFTMODEM_ENB_BIT)
#define IS_SOFTMODEM_GNB_BIT ( get_softmodem_optmask() & SOFTMODEM_GNB_BIT)
#define IS_SOFTMODEM_4GUE_BIT ( get_softmodem_optmask() & SOFTMODEM_4GUE_BIT)
#define IS_SOFTMODEM_5GUE_BIT ( get_softmodem_optmask() & SOFTMODEM_5GUE_BIT)
typedef struct {
uint64_t optmask;
//THREAD_STRUCT thread_struct;
char rf_config_file[1024];
char split73[1024];
char threadPoolConfig[1024];
int phy_test;
int do_ra;
int sa;
uint8_t usim_test;
int emulate_rf;
int wait_for_sync; //eNodeB only
int single_thread_flag; //eNodeB only
int chain_offset;
int numerology;
int band;
unsigned int start_msc;
uint32_t clock_source;
uint32_t timing_source;
int hw_timing_advance;
uint32_t send_dmrs_sync;
int use_256qam_table;
uint8_t nfapi;
int nsa;
uint16_t node_number;
int non_stop;
} softmodem_params_t;
extern uint64_t get_softmodem_optmask(void);
extern uint64_t set_softmodem_optmask(uint64_t bitmask);
extern softmodem_params_t *get_softmodem_params(void);
extern void get_common_options(uint32_t execmask);
extern char *get_softmodem_function(uint64_t *sofmodemfunc_mask_ptr);
#define SOFTMODEM_RTSIGNAL (SIGRTMIN+1)
extern void set_softmodem_sighandler(void);
extern uint64_t downlink_frequency[MAX_NUM_CCs][4];
extern int32_t uplink_frequency_offset[MAX_NUM_CCs][4];
extern int usrp_tx_thread;
extern uint16_t sl_ahead;
extern uint16_t sf_ahead;
extern volatile int oai_exit;
void tx_func(void *param);
void rx_func(void *param);
void ru_tx_func(void *param);
extern uint8_t nfapi_mode;
extern int16_t vnf_pnf_sfnslot_delta;
#ifdef __cplusplus
}
#endif
#endif
Reference in New Issue View Git Blame Copy Permalink