maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
2a979f4e2fcbd586b57cb03abf93b3a09cf4c29a
openairinterface5g/openair1/SIMULATION/NR_PHY/pbchsim.c
T
Melissa Elkadi 9b16c1d860 Merge branch 'eurecom-develop' into episys/merge_nsa_w_develop 
At this point we are successfully able to build.
Additionally, we can run the scenario,
however, it does not pass. It seems that the gNB
is not connecting to the proxy correctly. Just
wanted to push the progress so far. FYI, the items
that had to be changed to correct the linking issues
were the following:

 - mac_rrc_data_ind_ue vs. nr_mac_rrc_data_ind_ue
 - rrc_data_req vs. nr_rrc_data_req
 - mac_rrc_data_req_ue vs. nr_mac_rrc_data_req_ue
 - rrc_data_req_ue vs. rrc_data_req_nr_ue
 - rrc_data_req vs. nr_rrc_data_req

The listed functions should be declard in the LTE/NR
UE directory depending on the functionality. Several
were mixed. i.e.: LTE functions being called in NR UE.

Also, removing siWindowLength, siWindowLength_int,
SIBType, SIBPeriod, and siPeriod_int from the NR UE RRC.
These variable were not used in the NR UE and are defined
for LTE only.

Lastly, in the NR_IF_Module.c of the NR UE, the global
variable def_dci_pdu_rel15 is not accessible. Need to
revisit this. For not it is commented out.
2021-08-11 10:23:42 -07:00

772 lines
24 KiB
C
Raw Blame History

/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
#include <string.h>
#include <math.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include "common/config/config_userapi.h"
#include "common/utils/LOG/log.h"
#include "common/ran_context.h"
#include "PHY/types.h"
#include "PHY/defs_nr_common.h"
#include "PHY/defs_nr_UE.h"
#include "PHY/defs_gNB.h"
#include "PHY/NR_REFSIG/refsig_defs_ue.h"
#include "PHY/MODULATION/modulation_eNB.h"
#include "PHY/MODULATION/modulation_UE.h"
#include "PHY/MODULATION/nr_modulation.h"
#include "PHY/INIT/phy_init.h"
#include "PHY/NR_TRANSPORT/nr_transport_proto.h"
#include "PHY/NR_UE_TRANSPORT/nr_transport_proto_ue.h"
#include "PHY/NR_UE_ESTIMATION/nr_estimation.h"
#include "PHY/phy_vars.h"
#include "SCHED_NR/sched_nr.h"
#include "openair1/SIMULATION/TOOLS/sim.h"
#include "openair1/SIMULATION/RF/rf.h"
#include "openair1/SIMULATION/NR_PHY/nr_unitary_defs.h"
#include "openair1/SIMULATION/NR_PHY/nr_dummy_functions.c"
#include "openair1/PHY/MODULATION/nr_modulation.h"
#include <executables/softmodem-common.h>
//#define DEBUG_NR_PBCHSIM
PHY_VARS_gNB *gNB;
PHY_VARS_NR_UE *UE;
RAN_CONTEXT_t RC;
int32_t uplink_frequency_offset[MAX_NUM_CCs][4];
double cpuf;
//uint8_t nfapi_mode = 0;
uint16_t NB_UE_INST = 1;
// needed for some functions
openair0_config_t openair0_cfg[MAX_CARDS];
uint8_t const nr_rv_round_map[4] = {0, 2, 1, 3};
uint8_t const nr_rv_round_map_ue[4] = {0, 2, 1, 3};
uint64_t get_softmodem_optmask(void) {return 0;}
softmodem_params_t *get_softmodem_params(void) {return 0;}
void init_downlink_harq_status(NR_DL_UE_HARQ_t *dl_harq) {}
void nr_phy_config_request_sim_pbchsim(PHY_VARS_gNB *gNB,
int N_RB_DL,
int N_RB_UL,
int mu,
int Nid_cell,
uint64_t position_in_burst)
{
NR_DL_FRAME_PARMS *fp = &gNB->frame_parms;
nfapi_nr_config_request_scf_t *gNB_config = &gNB->gNB_config;
//overwrite for new NR parameters
uint64_t rev_burst=0;
for (int i=0; i<64; i++)
rev_burst |= (((position_in_burst>>(63-i))&0x01)<<i);
gNB_config->cell_config.phy_cell_id.value = Nid_cell;
gNB_config->ssb_config.scs_common.value = mu;
gNB_config->ssb_table.ssb_subcarrier_offset.value = 0;
gNB_config->ssb_table.ssb_offset_point_a.value = (N_RB_DL-20)>>1;
gNB_config->ssb_table.ssb_mask_list[1].ssb_mask.value = (rev_burst)&(0xFFFFFFFF);
gNB_config->ssb_table.ssb_mask_list[0].ssb_mask.value = (rev_burst>>32)&(0xFFFFFFFF);
gNB_config->cell_config.frame_duplex_type.value = TDD;
gNB_config->ssb_table.ssb_period.value = 1; //10ms
gNB_config->carrier_config.dl_grid_size[mu].value = N_RB_DL;
gNB_config->carrier_config.ul_grid_size[mu].value = N_RB_UL;
gNB_config->carrier_config.num_tx_ant.value = fp->nb_antennas_tx;
gNB_config->carrier_config.num_rx_ant.value = fp->nb_antennas_rx;
gNB_config->tdd_table.tdd_period.value = 0;
//gNB_config->subframe_config.dl_cyclic_prefix_type.value = (fp->Ncp == NORMAL) ? NFAPI_CP_NORMAL : NFAPI_CP_EXTENDED;
gNB->mac_enabled = 1;
fp->dl_CarrierFreq = 3600000000;//from_nrarfcn(gNB_config->nfapi_config.rf_bands.rf_band[0],gNB_config->nfapi_config.nrarfcn.value);
fp->ul_CarrierFreq = 3600000000;//fp->dl_CarrierFreq - (get_uldl_offset(gNB_config->nfapi_config.rf_bands.rf_band[0])*100000);
if (mu>2) fp->nr_band = 257;
else fp->nr_band = 78;
fp->threequarter_fs= 0;
gNB_config->carrier_config.dl_bandwidth.value = config_bandwidth(mu, N_RB_DL, fp->nr_band);
nr_init_frame_parms(gNB_config, fp);
init_symbol_rotation(fp);
gNB->configured = 1;
LOG_I(PHY,"gNB configured\n");
}
int main(int argc, char **argv)
{
char c;
int i,aa,start_symbol;
double sigma2, sigma2_dB=10,SNR,snr0=-2.0,snr1=2.0;
double cfo=0;
uint8_t snr1set=0;
int **txdata;
double **s_re,**s_im,**r_re,**r_im;
//double iqim = 0.0;
double ip =0.0;
//unsigned char pbch_pdu[6];
// int sync_pos, sync_pos_slot;
// FILE *rx_frame_file;
FILE *output_fd = NULL;
//uint8_t write_output_file=0;
//int result;
//int freq_offset;
// int subframe_offset;
// char fname[40], vname[40];
int trial,n_trials=1,n_errors=0,n_errors_payload=0;
uint8_t transmission_mode = 1,n_tx=1,n_rx=1;
uint16_t Nid_cell=0;
uint64_t SSB_positions=0x01;
channel_desc_t *gNB2UE;
//uint8_t extended_prefix_flag=0;
//int8_t interf1=-21,interf2=-21;
FILE *input_fd=NULL,*pbch_file_fd=NULL;
//uint32_t nsymb,tx_lev,tx_lev1 = 0,tx_lev2 = 0;
//char input_val_str[50],input_val_str2[50];
//uint8_t frame_mod4,num_pdcch_symbols = 0;
//double pbch_sinr;
//int pbch_tx_ant;
SCM_t channel_model=AWGN;//Rayleigh1_anticorr;
int N_RB_DL=273,mu=1;
//unsigned char frame_type = 0;
unsigned char pbch_phase = 0;
int frame=0;
int frame_length_complex_samples;
__attribute__((unused))
int frame_length_complex_samples_no_prefix;
NR_DL_FRAME_PARMS *frame_parms;
int ret, payload_ret=0;
int run_initial_sync=0;
int loglvl=OAILOG_WARNING;
float target_error_rate = 0.01;
cpuf = get_cpu_freq_GHz();
if ( load_configmodule(argc,argv,CONFIG_ENABLECMDLINEONLY) == 0) {
exit_fun("[NR_PBCHSIM] Error, configuration module init failed\n");
}
randominit(0);
while ((c = getopt (argc, argv, "f:hA:pf:g:i:j:n:o:s:S:t:x:y:z:M:N:F:GR:dP:IL:m:")) != -1) {
switch (c) {
/*case 'f':
write_output_file=1;
output_fd = fopen(optarg,"w");
if (output_fd==NULL) {
printf("Error opening %s\n",optarg);
exit(-1);
}
break;*/
/*case 'd':
frame_type = 1;
break;*/
case 'g':
switch((char)*optarg) {
case 'A':
channel_model=SCM_A;
break;
case 'B':
channel_model=SCM_B;
break;
case 'C':
channel_model=SCM_C;
break;
case 'D':
channel_model=SCM_D;
break;
case 'E':
channel_model=EPA;
break;
case 'F':
channel_model=EVA;
break;
case 'G':
channel_model=ETU;
break;
default:
printf("Unsupported channel model! Exiting.\n");
exit(-1);
}
break;
/*case 'i':
interf1=atoi(optarg);
break;
case 'j':
interf2=atoi(optarg);
break;*/
case 'n':
n_trials = atoi(optarg);
break;
case 'o':
cfo = atof(optarg);
#ifdef DEBUG_NR_PBCHSIM
printf("Setting CFO to %f Hz\n",cfo);
#endif
break;
case 's':
snr0 = atof(optarg);
#ifdef DEBUG_NR_PBCHSIM
printf("Setting SNR0 to %f\n",snr0);
#endif
break;
case 'S':
snr1 = atof(optarg);
snr1set=1;
#ifdef DEBUG_NR_PBCHSIM
printf("Setting SNR1 to %f\n",snr1);
#endif
break;
/*
case 't':
Td= atof(optarg);
break;
*/
/*case 'p':
extended_prefix_flag=1;
break;*/
/*
case 'r':
ricean_factor = pow(10,-.1*atof(optarg));
if (ricean_factor>1) {
printf("Ricean factor must be between 0 and 1\n");
exit(-1);
}
break;
*/
case 'x':
transmission_mode=atoi(optarg);
if ((transmission_mode!=1) && (transmission_mode!=2) && (transmission_mode!=6)) {
printf("Unsupported transmission mode %d. Exiting.\n",transmission_mode);
exit(-1);
}
break;
case 'y':
n_tx=atoi(optarg);
if ((n_tx==0) || (n_tx>2)) {
printf("Unsupported number of TX antennas %d. Exiting.\n", n_tx);
exit(-1);
}
break;
case 'z':
n_rx=atoi(optarg);
if ((n_rx==0) || (n_rx>2)) {
printf("Unsupported number of RX antennas %d. Exiting.\n", n_rx);
exit(-1);
}
break;
case 'M':
SSB_positions = atoi(optarg);
break;
case 'N':
Nid_cell = atoi(optarg);
break;
case 'R':
N_RB_DL = atoi(optarg);
break;
case 'F':
input_fd = fopen(optarg,"r");
if (input_fd==NULL) {
printf("Problem with filename %s. Exiting.\n", optarg);
exit(-1);
}
break;
case 'P':
pbch_phase = atoi(optarg);
if (pbch_phase>3)
printf("Illegal PBCH phase (0-3) got %d\n",pbch_phase);
break;
case 'I':
run_initial_sync=1;
target_error_rate=0.1;
break;
case 'L':
loglvl = atoi(optarg);
break;
case 'm':
mu = atoi(optarg);
break;
default:
case 'h':
printf("%s -h(elp) -p(extended_prefix) -N cell_id -f output_filename -F input_filename -g channel_model -n n_frames -t Delayspread -s snr0 -S snr1 -x transmission_mode -y TXant -z RXant -i Intefrence0 -j Interference1 -A interpolation_file -C(alibration offset dB) -N CellId\n",
argv[0]);
printf("-h This message\n");
//printf("-p Use extended prefix mode\n");
//printf("-d Use TDD\n");
printf("-n Number of frames to simulate\n");
printf("-m Numerology index\n");
printf("-s Starting SNR, runs from SNR0 to SNR0 + 5 dB. If n_frames is 1 then just SNR is simulated\n");
printf("-S Ending SNR, runs from SNR0 to SNR1\n");
printf("-t Delay spread for multipath channel\n");
printf("-g [A,B,C,D,E,F,G] Use 3GPP SCM (A,B,C,D) or 36-101 (E-EPA,F-EVA,G-ETU) models (ignores delay spread and Ricean factor)\n");
printf("-x Transmission mode (1,2,6 for the moment)\n");
printf("-y Number of TX antennas used in eNB\n");
printf("-z Number of RX antennas used in UE\n");
//printf("-i Relative strength of first intefering eNB (in dB) - cell_id mod 3 = 1\n");
//printf("-j Relative strength of second intefering eNB (in dB) - cell_id mod 3 = 2\n");
printf("-o Carrier frequency offset in Hz\n");
printf("-M Multiple SSB positions in burst\n");
printf("-N Nid_cell\n");
printf("-R N_RB_DL\n");
printf("-O oversampling factor (1,2,4,8,16)\n");
printf("-A Interpolation_filname Run with Abstraction to generate Scatter plot using interpolation polynomial in file\n");
//printf("-C Generate Calibration information for Abstraction (effective SNR adjustment to remove Pe bias w.r.t. AWGN)\n");
//printf("-f Output filename (.txt format) for Pe/SNR results\n");
printf("-F Input filename (.txt format) for RX conformance testing\n");
exit (-1);
break;
}
}
logInit();
set_glog(loglvl);
T_stdout = 1;
if (snr1set==0)
snr1 = snr0+10;
printf("Initializing gNodeB for mu %d, N_RB_DL %d\n",mu,N_RB_DL);
RC.gNB = (PHY_VARS_gNB**) malloc(sizeof(PHY_VARS_gNB *));
RC.gNB[0] = malloc(sizeof(PHY_VARS_gNB));
gNB = RC.gNB[0];
frame_parms = &gNB->frame_parms; //to be initialized I suppose (maybe not necessary for PBCH)
frame_parms->nb_antennas_tx = n_tx;
frame_parms->nb_antennas_rx = n_rx;
frame_parms->N_RB_DL = N_RB_DL;
frame_parms->Nid_cell = Nid_cell;
frame_parms->nushift = Nid_cell%4;
frame_parms->ssb_type = nr_ssb_type_C;
nr_phy_config_request_sim_pbchsim(gNB,N_RB_DL,N_RB_DL,mu,Nid_cell,SSB_positions);
phy_init_nr_gNB(gNB,0,1);
nr_set_ssb_first_subcarrier(&gNB->gNB_config,frame_parms);
uint8_t n_hf = 0;
int cyclic_prefix_type = NFAPI_CP_NORMAL;
double fs=0, eps;
double scs = 30000;
double bw = 100e6;
switch (mu) {
case 1:
scs = 30000;
frame_parms->Lmax = 8;
if (N_RB_DL == 217) {
fs = 122.88e6;
bw = 80e6;
}
else if (N_RB_DL == 245) {
fs = 122.88e6;
bw = 90e6;
}
else if (N_RB_DL == 273) {
fs = 122.88e6;
bw = 100e6;
}
else if (N_RB_DL == 106) {
fs = 61.44e6;
bw = 40e6;
}
else AssertFatal(1==0,"Unsupported numerology for mu %d, N_RB %d\n",mu, N_RB_DL);
break;
case 3:
frame_parms->Lmax = 64;
scs = 120000;
if (N_RB_DL == 66) {
fs = 122.88e6;
bw = 100e6;
}
else AssertFatal(1==0,"Unsupported numerology for mu %d, N_RB %d\n",mu, N_RB_DL);
break;
}
// cfo with respect to sub-carrier spacing
eps = cfo/scs;
// computation of integer and fractional FO to compare with estimation results
int IFO;
if(eps!=0.0){
printf("Introducing a CFO of %lf relative to SCS of %d kHz\n",eps,(int)(scs/1000));
if (eps>0)
IFO=(int)(eps+0.5);
else
IFO=(int)(eps-0.5);
printf("FFO = %lf; IFO = %d\n",eps-IFO,IFO);
}
gNB2UE = new_channel_desc_scm(n_tx,
n_rx,
channel_model,
fs,
bw,
300e-9,
0,
0,
0, 0);
if (gNB2UE==NULL) {
printf("Problem generating channel model. Exiting.\n");
exit(-1);
}
frame_length_complex_samples = frame_parms->samples_per_subframe*NR_NUMBER_OF_SUBFRAMES_PER_FRAME;
frame_length_complex_samples_no_prefix = frame_parms->samples_per_subframe_wCP;
s_re = malloc(2*sizeof(double*));
s_im = malloc(2*sizeof(double*));
r_re = malloc(2*sizeof(double*));
r_im = malloc(2*sizeof(double*));
txdata = malloc(2*sizeof(int*));
for (i=0; i<2; i++) {
s_re[i] = malloc(frame_length_complex_samples*sizeof(double));
bzero(s_re[i],frame_length_complex_samples*sizeof(double));
s_im[i] = malloc(frame_length_complex_samples*sizeof(double));
bzero(s_im[i],frame_length_complex_samples*sizeof(double));
r_re[i] = malloc(frame_length_complex_samples*sizeof(double));
bzero(r_re[i],frame_length_complex_samples*sizeof(double));
r_im[i] = malloc(frame_length_complex_samples*sizeof(double));
bzero(r_im[i],frame_length_complex_samples*sizeof(double));
printf("Allocating %d samples for txdata\n",frame_length_complex_samples);
txdata[i] = malloc(frame_length_complex_samples*sizeof(int));
bzero(r_re[i],frame_length_complex_samples*sizeof(int));
}
if (pbch_file_fd!=NULL) {
load_pbch_desc(pbch_file_fd);
}
//configure UE
UE = malloc(sizeof(PHY_VARS_NR_UE));
memcpy(&UE->frame_parms,frame_parms,sizeof(NR_DL_FRAME_PARMS));
//phy_init_nr_top(UE); //called from init_nr_ue_signal
if (run_initial_sync==1) UE->is_synchronized = 0;
else UE->is_synchronized = 1;
UE->perfect_ce = 0;
if(eps!=0.0)
UE->UE_fo_compensation = 1; // if a frequency offset is set then perform fo estimation and compensation
if (init_nr_ue_signal(UE, 1, 0) != 0) {
printf("Error at UE NR initialisation\n");
exit(-1);
}
nr_gold_pbch(UE);
// generate signal
if (input_fd==NULL) {
for (i=0; i<frame_parms->Lmax; i++) {
if((SSB_positions >> i) & 0x01) {
gNB->ssb[i].ssb_pdu.ssb_pdu_rel15.bchPayload = 0x55dd33;
gNB->ssb[i].ssb_pdu.ssb_pdu_rel15.SsbBlockIndex = i;
start_symbol = nr_get_ssb_start_symbol(frame_parms,i);
int slot = start_symbol/14;
for (aa=0; aa<gNB->frame_parms.nb_antennas_tx; aa++)
memset(gNB->common_vars.txdataF[aa],0,frame_parms->samples_per_slot_wCP*sizeof(int32_t));
nr_common_signal_procedures (gNB,frame,slot,gNB->ssb[i].ssb_pdu);
for (aa=0; aa<gNB->frame_parms.nb_antennas_tx; aa++) {
if (cyclic_prefix_type == 1) {
PHY_ofdm_mod(gNB->common_vars.txdataF[aa],
&txdata[aa][frame_parms->get_samples_slot_timestamp(slot,frame_parms,0)],
frame_parms->ofdm_symbol_size,
12,
frame_parms->nb_prefix_samples,
CYCLIC_PREFIX);
} else {
/*nr_normal_prefix_mod(gNB->common_vars.txdataF[aa],
&txdata[aa][frame_parms->get_samples_slot_timestamp(slot,frame_parms,0)],
14,
frame_parms);*/
PHY_ofdm_mod(gNB->common_vars.txdataF[aa],
(int*)&txdata[aa][frame_parms->get_samples_slot_timestamp(slot,frame_parms,0)],
frame_parms->ofdm_symbol_size,
1,
frame_parms->nb_prefix_samples0,
CYCLIC_PREFIX);
apply_nr_rotation(frame_parms,
(int16_t*)&txdata[aa][frame_parms->get_samples_slot_timestamp(slot,frame_parms,0)],
slot,
0,
1,
frame_parms->ofdm_symbol_size+frame_parms->nb_prefix_samples0);
PHY_ofdm_mod(&gNB->common_vars.txdataF[aa][frame_parms->ofdm_symbol_size],
(int*)&txdata[aa][frame_parms->get_samples_slot_timestamp(slot,frame_parms,0)+frame_parms->nb_prefix_samples0+frame_parms->ofdm_symbol_size],
frame_parms->ofdm_symbol_size,
13,
frame_parms->nb_prefix_samples,
CYCLIC_PREFIX);
apply_nr_rotation(frame_parms,
(int16_t*)&txdata[aa][frame_parms->get_samples_slot_timestamp(slot,frame_parms,0)+frame_parms->nb_prefix_samples0+frame_parms->ofdm_symbol_size],
slot,
1,
13,
frame_parms->ofdm_symbol_size+frame_parms->nb_prefix_samples);
}
}
}
}
LOG_M("txsigF0.m","txsF0", gNB->common_vars.txdataF[0],frame_length_complex_samples_no_prefix,1,1);
if (gNB->frame_parms.nb_antennas_tx>1)
LOG_M("txsigF1.m","txsF1", gNB->common_vars.txdataF[1],frame_length_complex_samples_no_prefix,1,1);
} else {
printf("Reading %d samples from file to antenna buffer %d\n",frame_length_complex_samples,0);
UE->UE_fo_compensation = 1; // perform fo compensation when samples from file are used
if (fread(txdata[0],
sizeof(int32_t),
frame_length_complex_samples,
input_fd) != frame_length_complex_samples) {
printf("error reading from file\n");
//exit(-1);
}
}
LOG_M("txsig0.m","txs0", txdata[0],frame_length_complex_samples,1,1);
if (gNB->frame_parms.nb_antennas_tx>1)
LOG_M("txsig1.m","txs1", txdata[1],frame_length_complex_samples,1,1);
if (output_fd)
fwrite(txdata[0],sizeof(int32_t),frame_length_complex_samples,output_fd);
/*int txlev = signal_energy(&txdata[0][5*frame_parms->ofdm_symbol_size + 4*frame_parms->nb_prefix_samples + frame_parms->nb_prefix_samples0],
frame_parms->ofdm_symbol_size + frame_parms->nb_prefix_samples);
printf("txlev %d (%f)\n",txlev,10*log10(txlev));*/
for (i=0; i<frame_length_complex_samples; i++) {
for (aa=0; aa<frame_parms->nb_antennas_tx; aa++) {
r_re[aa][i] = ((double)(((short *)txdata[aa]))[(i<<1)]);
r_im[aa][i] = ((double)(((short *)txdata[aa]))[(i<<1)+1]);
}
}
for (SNR=snr0; SNR<snr1; SNR+=.2) {
n_errors = 0;
n_errors_payload = 0;
for (trial=0; trial<n_trials; trial++) {
// multipath channel
//multipath_channel(gNB2UE,s_re,s_im,r_re,r_im,frame_length_complex_samples,0);
//AWGN
sigma2_dB = 20*log10((double)AMP/4)-SNR;
sigma2 = pow(10,sigma2_dB/10);
//printf("sigma2 %f (%f dB), tx_lev %f (%f dB)\n",sigma2,sigma2_dB,txlev,10*log10((double)txlev));
if(eps!=0.0)
rf_rx(r_re, // real part of txdata
r_im, // imag part of txdata
NULL, // interference real part
NULL, // interference imag part
0, // interference power
frame_parms->nb_antennas_rx, // number of rx antennas
frame_length_complex_samples, // number of samples in frame
1.0e9/fs, //sampling time (ns)
cfo, // frequency offset in Hz
0.0, // drift (not implemented)
0.0, // noise figure (not implemented)
0.0, // rx gain in dB ?
200, // 3rd order non-linearity in dB ?
&ip, // initial phase
30.0e3, // phase noise cutoff in kHz
-500.0, // phase noise amplitude in dBc
0.0, // IQ imbalance (dB),
0.0); // IQ phase imbalance (rad)
for (i=0; i<frame_length_complex_samples; i++) {
for (aa=0; aa<frame_parms->nb_antennas_rx; aa++) {
((short*) UE->common_vars.rxdata[aa])[2*i] = (short) ((r_re[aa][i] + sqrt(sigma2/2)*gaussdouble(0.0,1.0)));
((short*) UE->common_vars.rxdata[aa])[2*i+1] = (short) ((r_im[aa][i] + sqrt(sigma2/2)*gaussdouble(0.0,1.0)));
}
}
if (n_trials==1) {
LOG_M("rxsig0.m","rxs0", UE->common_vars.rxdata[0],frame_parms->samples_per_frame,1,1);
if (gNB->frame_parms.nb_antennas_tx>1)
LOG_M("rxsig1.m","rxs1", UE->common_vars.rxdata[1],frame_parms->samples_per_frame,1,1);
}
if (UE->is_synchronized == 0) {
UE_nr_rxtx_proc_t proc={0};
ret = nr_initial_sync(&proc, UE, 1);
printf("nr_initial_sync1 returns %d\n",ret);
if (ret<0) n_errors++;
}
else {
UE_nr_rxtx_proc_t proc={0};
UE->rx_offset=0;
uint8_t ssb_index = 0;
while (!((SSB_positions >> ssb_index) & 0x01)) ssb_index++; // to select the first transmitted ssb
UE->symbol_offset = nr_get_ssb_start_symbol(frame_parms,ssb_index);
int ssb_slot = (UE->symbol_offset/14)+(n_hf*(frame_parms->slots_per_frame>>1));
for (int i=UE->symbol_offset+1; i<UE->symbol_offset+4; i++) {
nr_slot_fep(UE,
&proc,
i%frame_parms->symbols_per_slot,
ssb_slot);
nr_pbch_channel_estimation(UE,&proc,0,ssb_slot,i%frame_parms->symbols_per_slot,i-(UE->symbol_offset+1),ssb_index%8,n_hf);
}
ret = nr_rx_pbch(UE,
&proc,
UE->pbch_vars[0],
frame_parms,
0,
ssb_index%8,
SISO);
if (ret==0) {
//UE->rx_ind.rx_indication_body->mib_pdu.ssb_index; //not yet detected automatically
//UE->rx_ind.rx_indication_body->mib_pdu.ssb_length; //Lmax, not yet detected automatically
uint8_t gNB_xtra_byte=0;
for (int i=0; i<8; i++)
gNB_xtra_byte |= ((gNB->pbch.pbch_a>>(31-i))&1)<<(7-i);
payload_ret = (UE->pbch_vars[0]->xtra_byte == gNB_xtra_byte);
for (i=0;i<3;i++){
payload_ret += (UE->pbch_vars[0]->decoded_output[i] == ((gNB->ssb[ssb_index].ssb_pdu.ssb_pdu_rel15.bchPayload>>(8*i)) & 0xff));
}
//printf("xtra byte gNB: 0x%02x UE: 0x%02x\n",gNB_xtra_byte, UE->pbch_vars[0]->xtra_byte);
//printf("ret %d\n", payload_ret);
if (payload_ret!=4)
n_errors_payload++;
}
if (ret!=0) n_errors++;
}
} //noise trials
printf("SNR %f: trials %d, n_errors_crc = %d, n_errors_payload %d\n", SNR,n_trials,n_errors,n_errors_payload);
if (((float)n_errors/(float)n_trials <= target_error_rate) && (n_errors_payload==0)) {
printf("PBCH test OK\n");
break;
}
if (n_trials==1)
break;
} // NSR
for (i=0; i<2; i++) {
free(s_re[i]);
free(s_im[i]);
free(r_re[i]);
free(r_im[i]);
free(txdata[i]);
}
free(s_re);
free(s_im);
free(r_re);
free(r_im);
free(txdata);
if (output_fd)
fclose(output_fd);
if (input_fd)
fclose(input_fd);
return(n_errors);
}
Reference in New Issue View Git Blame Copy Permalink