maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
2c351c94d008a2c811d671d8c0ed30b2f42e12a4
openairinterface5g/cmake_targets/tools/build_helper
T
Robert Schmidt 2c351c94d0 Merge remote-tracking branch 'origin/doc-updates' into integration_2025_w33 (!3590) 
Improve MAC docs for MCS and docker for BuildKit usage

See commits for details. The first one is for fixing an omission in
!3281, the second to clarify docker build usage.

Closes: #973
2025-08-14 16:46:44 +02:00

725 lines
24 KiB
Plaintext
Executable File
Raw Blame History

#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
# file build_helper
# brief
# authors Laurent Thomas, Lionel GAUTHIER
#
#######################################
if [ ! -f /etc/os-release ]; then
echo "No /etc/os-release file found. You're likely on an unsupported distro."
exit -1
fi
OS_DISTRO=$(grep "^ID=" /etc/os-release | sed "s/ID=//" | sed "s/\"//g")
OS_RELEASE=$(grep "^VERSION_ID=" /etc/os-release | sed "s/VERSION_ID=//" | sed "s/\"//g")
case "$OS_DISTRO" in
fedora) OS_BASEDISTRO="fedora"; INSTALLER="dnf"; CMAKE="cmake" ;;
rhel) OS_BASEDISTRO="fedora"; INSTALLER="dnf"; CMAKE="cmake3" ;;
rocky) OS_BASEDISTRO="fedora"; INSTALLER="dnf"; CMAKE="cmake" ;;
centos) OS_BASEDISTRO="fedora"; INSTALLER="dnf"; CMAKE="cmake3" ;; # CentOS Stream
debian) OS_BASEDISTRO="debian"; INSTALLER="apt-get"; CMAKE="cmake" ;;
ubuntu) OS_BASEDISTRO="debian"; INSTALLER="apt-get"; CMAKE="cmake" ;;
esac
KERNEL_VERSION=$(uname -r | cut -d '.' -f1)
KERNEL_MAJOR=$(uname -r | cut -d '.' -f2)
#check if we run inside a container
IS_CONTAINER=`grep -E -c "docker|podman|kubepods|libpod|buildah" /proc/self/cgroup || true`
#sudo is not needed when we are root
if [ "$UID" = 0 ]
then
SUDO=''
else
SUDO='sudo -S -E'
fi
###############################
## echo and family
###############################
# only emit color if connected to a terminal, and if it supports colors
if [ -t 1 ]; then
num_colors=$(tput colors)
if [ -n "$num_colors" ] && [ "$num_colors" -ge 8 ]; then
red='\E[31m'
green='\E[32m'
yellow='\E[33m'
blue='\E[1;34m'
reset_color='\E[00m'
fi
fi
cecho() {
# Color-echo
# arg1 = message
# arg2 = color
local default_msg="No Message."
message=${1:-$default_msg}
color=${2:-$green}
echo -e "$color$message$reset_color"
return
}
echo_error() { cecho "$*" $red ;}
echo_fatal() { cecho "$*" $red; exit -1 ;}
echo_warning() { cecho "$*" $yellow ;}
echo_success() { cecho "$*" $green ;}
echo_info() { cecho "$*" $blue ;}
########################
# distribution helpers #
########################
# This function return a string to identify the distribution we are running
# If we can't check the distribution, it returns "Unknown"
# This function return always true as exit code by design
# Examples:
# debian8.5
get_distribution_release() {
if [[ ! -z "$OS_DISTRO$OS_RELEASE" ]]; then
echo "$OS_DISTRO$OS_RELEASE"
else
echo Unknown
fi
}
check_supported_distribution() {
local distribution=$(get_distribution_release)
case "$distribution" in
"ubuntu24.04") return 0 ;;
"ubuntu22.04") return 0 ;;
"ubuntu20.04") return 0 ;;
"debian11") return 0 ;;
"fedora41") return 0 ;;
"fedora40") return 0 ;;
"rhel8.2") return 0 ;;
"rhel8.3") return 0 ;;
"rhel8.4") return 0 ;;
"rhel8.5") return 0 ;;
"rhel8.6") return 0 ;;
"rhel8.7") return 0 ;;
"rhel8.8") return 0 ;;
"rhel8.9") return 0 ;;
"rhel9.0") return 0 ;;
"rhel9.1") return 0 ;;
"rhel9.2") return 0 ;;
"rhel9.3") return 0 ;;
"rhel9.4") return 0 ;;
"rhel9.5") return 0 ;;
"rhel9.6") return 0 ;;
"rhel9.7") return 0 ;;
"centos9") return 0 ;; # CentOS stream
"rocky8.7") return 0 ;;
"rocky8.8") return 0 ;;
"rocky8.9") return 0 ;;
"rocky9.1") return 0 ;;
"rocky9.2") return 0 ;;
"rocky9.3") return 0 ;;
"rocky9.4") return 0 ;;
"rocky9.5") return 0 ;;
"rocky9.6") return 0 ;;
"rocky9.7") return 0 ;;
esac
return 1
}
##################
# Error handlers #
##################
handler_EXIT() {
local exit_code=$?
[ "$exit_code" -eq 0 ] || echo_error "build have failed"
exit $exit_code
}
trap handler_EXIT EXIT
###########################
# Cleaners
###########################
clean_kernel() {
$SUDO modprobe ip_tables
$SUDO modprobe x_tables
$SUDO iptables -P INPUT ACCEPT
$SUDO iptables -F INPUT
$SUDO iptables -P OUTPUT ACCEPT
$SUDO iptables -F OUTPUT
$SUDO iptables -P FORWARD ACCEPT
$SUDO iptables -F FORWARD
$SUDO iptables -t nat -F
$SUDO iptables -t mangle -F
$SUDO iptables -t filter -F
$SUDO iptables -t raw -F
echo_info "Flushed iptables"
}
clean_all_files() {
set_openair_env
dir=$OPENAIR_DIR/cmake_targets
rm -rf $dir/ran_build $dir/ran_build_noLOG
rm -rf $dir/lte-simulators/build
rm -rf $dir/oaisim_build_oai/build $dir/oaisim_build_oai/CMakeLists.txt
rm -rf $dir/autotests/bin $dir/autotests/log $dir/autotests/*/build
}
############################################
# External packages installers
############################################
install_usrp_uhd_driver_from_source(){
echo_info "\nInstalling UHD driver from sources."
pushd /tmp
echo "Cloning UHD driver repository"
rm -rf /tmp/uhd
git clone https://github.com/EttusResearch/uhd.git
cd uhd
# For our legacy TDD eNB running with a B2xx RF board
# the following patch has to be applied
if [[ -v UHD_VERSION ]]; then
git checkout tags/v${UHD_VERSION}
# We recommend to use not older than 3.15.0.0
if [[ "$UHD_VERSION" == "3.15.0.0" ]]; then
# Tested that patch for the following versions:
# - 3.15.0.0
git apply $OPENAIR_DIR/cmake_targets/tools/uhd-3.15-tdd-patch.diff
ret=$?;[[ $ret -ne 0 ]] && echo_fatal "Could not apply the TDD patch"
elif [[ "$UHD_VERSION" == "4.8.0.0" || "$UHD_VERSION" == "4.7.0.0" || "$UHD_VERSION" == "4.6.0.0" || "$UHD_VERSION" == "4.5.0.0" ]]; then
# Tested that patch for the following versions:
# - 4.7.0.0
cp $OPENAIR_DIR/cmake_targets/tools/uhd-4.x-tdd-patch.diff $OPENAIR_DIR/cmake_targets/tools/uhd-4.5plus-tdd-patch.diff
sed -i '9,13 s/STATE_OFF/STATE_RX1_OFF/' $OPENAIR_DIR/cmake_targets/tools/uhd-4.5plus-tdd-patch.diff
sed -i '24,28 s/STATE_OFF/STATE_RX2_OFF/' $OPENAIR_DIR/cmake_targets/tools/uhd-4.5plus-tdd-patch.diff
git apply $OPENAIR_DIR/cmake_targets/tools/uhd-4.5plus-tdd-patch.diff
ret=$?;[[ $ret -ne 0 ]] && echo_fatal "Could not apply the TDD patch"
else
# Tested that patch for the following versions:
# - 4.0.0.0
# - 4.1.0.0
# - 4.1.0.5
# - 4.2.0.0
# - 4.2.0.1
# - 4.3.0.0-rc1
# - 4.4.0.0
git apply $OPENAIR_DIR/cmake_targets/tools/uhd-4.x-tdd-patch.diff
ret=$?;[[ $ret -ne 0 ]] && echo_fatal "Could not apply the TDD patch"
fi
else
git checkout tags/v4.0.0.0
git apply $OPENAIR_DIR/cmake_targets/tools/uhd-4.x-tdd-patch.diff
ret=$?;[[ $ret -ne 0 ]] && echo_fatal "Could not apply the TDD patch"
fi
# Printing out the results of the patch to make sure it was properly applied
git diff
mkdir -p host/build
cd host/build || true
$CMAKE ../ -GNinja -DENABLE_TESTS=OFF -DENABLE_EXAMPLES=OFF -DENABLE_B100=OFF -DENABLE_DOXYGEN=OFF -DENABLE_MANUAL=OFF -DENABLE_MAN_PAGES=OFF -DENABLE_MAN_PAGE_COMPRESSION=OFF -DENABLE_OCTOCLOCK=ON -DENABLE_USRP1=OFF -DENABLE_USRP2=OFF
echo "Compiling UHD"
ninja
$SUDO ninja install
$SUDO ldconfig -v
if [ $IS_CONTAINER -eq 0 ]; then
if [[ "$OS_DISTRO" == "ubuntu" ]]; then
$SUDO /usr/local/lib/uhd/utils/uhd_images_downloader.py
fi
if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "rocky" ]]; then
$SUDO /usr/local/lib64/uhd/utils/uhd_images_downloader.py
fi
fi
popd
rm -rf /tmp/uhd
}
check_install_usrp_uhd_driver(){
if [[ "$OS_BASEDISTRO" == "debian" ]]; then
boost_libs_ubuntu="libboost-chrono-dev libboost-date-time-dev libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev libboost-test-dev libboost-regex-dev"
#first we remove old installation
$SUDO apt-get remove uhd* libuhd* -y || true
v=$(lsb_release -cs)
$SUDO apt-add-repository --remove "deb http://files.ettus.com/binaries/uhd/repo/uhd/ubuntu/$v $v main"
if [[ -v BUILD_UHD_FROM_SOURCE ]] || [[ "$OS_DISTRO" == "debian" ]]; then
$SUDO apt-get install -y $boost_libs_ubuntu libusb-1.0-0-dev doxygen python3-docutils python3-mako python3-numpy python3-requests python3-setuptools ninja-build
install_usrp_uhd_driver_from_source
return
fi
# The new USRP repository
# Raphael Defosseux: Adding a loop on adding PPA because in CI the gpg key retrieve may
# timeout due to proxy / network latencies in Eurecom on VM
echo_info "\nAdding PPA repository ettusresearch/uhd\n"
x=0
while [ $x -le 5 ]
do
if $SUDO add-apt-repository ppa:ettusresearch/uhd -y
then
echo_info "add-apt-repository successful\n"
break
else
echo_info "add-apt-repository failed, retrying...\n"
sleep 30
fi
x=$((x + 1))
done
$SUDO apt-get update
$SUDO apt-get -y install python-tk $boost_libs_ubuntu libusb-1.0-0-dev
case "$(get_distribution_release)" in
"ubuntu20.04" | "ubuntu22.04")
$SUDO apt-get -y install libuhd-dev libuhd4.5.0 uhd-host
;;
esac
elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
boost_libs_fedora="boost-chrono boost-date-time boost-filesystem boost-program-options boost-thread boost-test boost-regex boost-devel"
if [ $IS_CONTAINER -eq 0 ]
then
$SUDO $INSTALLER -y install python3 $boost_libs_fedora libusb-devel libusbx-devel python3-mako python3-docutils python3-pip $CMAKE
$SUDO pip3 install requests
else
$SUDO $INSTALLER -y install $boost_libs_fedora $CMAKE
$SUDO pip3 install mako requests
fi
if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]] || [[ "$OS_DISTRO" == "rocky" ]]; then
if [ $IS_CONTAINER -eq 0 ]
then
# until EPEL repo hasn't bumped UHD driver to >=3.10 in EPEL, build driver from source
$SUDO $INSTALLER -y remove uhd uhd-devel uhd-firmware
fi
install_usrp_uhd_driver_from_source
else
$SUDO $INSTALLER -y install uhd uhd-devel uhd-firmware
fi
fi
}
install_usrp_uhd_driver() {
if [[ "$OS_DISTRO" == "ubuntu" ]]; then
# We move uhd-host apart because it depends on linux kernel version
# On newer kernels, it fails to install
$SUDO apt-get -y install uhd-host
fi
# quick workaround for below distributions
local distribution=$(get_distribution_release)
if [ -z $1 ]; then
if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "rocky" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
$SUDO /usr/local/bin/uhd_images_downloader
else
$SUDO uhd_images_downloader
fi
else
if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "rocky" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
$SUDO /usr/local/bin/uhd_images_downloader -i $1
else
$SUDO uhd_images_downloader -i $1
fi
fi
}
install_bladerf_driver_from_source(){
echo_info "\nInstalling BladeRF driver from sources."
cd /tmp
echo "Downloading BladeRF driver"
rm -rf /tmp/bladeRF
git clone https://github.com/Nuand/bladeRF.git
cd bladeRF
git checkout tags/2016.06
mkdir -p build
cd build
$CMAKE ../
echo "Compiling BladeRF driver"
make
$SUDO make install
$SUDO ldconfig
echo "Downloading FPGA and firmware images"
cd /tmp/bladeRF
#wget has been removed from default dependencies, so we must be sure that's installed
$SUDO $INSTALLER -y install wget
wget --tries=3 --retry-connrefused https://www.nuand.com/fx3/bladeRF_fw_latest.img
wget --tries=3 --retry-connrefused https://www.nuand.com/fpga/hostedx40-latest.rbf
sudo mkdir -p /usr/share/Nuand/bladeRF
sudo mv bladeRF_fw_latest.img /usr/share/Nuand/bladeRF/bladeRF_fw.img
sudo mv hostedx40-latest.rbf /usr/share/Nuand/bladeRF/hostedx40.rbf
}
check_install_bladerf_driver(){
if [[ "$OS_DISTRO" == "ubuntu" ]]; then
$SUDO apt-get install -y bladerf libbladerf-dev
$SUDO apt-get install -y bladerf-firmware-fx3
$SUDO apt-get install -y bladerf-fpga-hostedx40
elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
install_bladerf_driver_from_source
else
echo_error "BladeRF Installer for OAI does not support automatic build. Install BladeRF compiling sources manually from BladeRF website"
fi
}
flash_firmware_bladerf() {
$SUDO bladeRF-cli --flash-firmware /usr/share/Nuand/bladeRF/bladeRF_fw.img
}
check_install_lmssdr_driver(){
if ( [ -d "/usr/local/include/lime" ] &&
[ -f "/usr/local/include/lime/LimeSuite.h" ] )
then
echo_success "Found lmssdr drivers and tools installed from source"
else
echo_error "lmssdr support implies installing lmssdr drivers and tools" \
" from sources. check:"
echo_info "https://wiki.myriadrf.org/Lime_Suite"
echo_fatal "Cannot compile lmssdr device"
fi
}
install_soapy_from_source(){
echo_info "\nInstalling Soapy EcoSystem from source."
cd /tmp
echo "Downloading SoapySDR"
rm -rf /tmp/SoapySDR
git clone -b soapy-sdr-0.7.0 --single-branch https://github.com/pothosware/SoapySDR.git
cd SoapySDR
#git checkout tags/release_003_010_001_001
mkdir -p build
cd build
$CMAKE ../
echo "Compiling SoapySDR"
make -j`nproc`
$SUDO make install
$SUDO ldconfig
cd /tmp
echo "Downloading SoapyRemote"
rm -rf /tmp/SoapyRemote
git clone -b soapy-remote-0.5.0 --single-branch https://github.com/pothosware/SoapyRemote.git
cd SoapyRemote
#git checkout tags/release_003_010_001_001
mkdir -p build
cd build
$CMAKE ../
echo "Compiling SoapyRemote"
make -j`nproc`
$SUDO make install
$SUDO ldconfig
}
install_soapy_iris_from_source(){
echo_info "\nInstalling Iris driver from source."
cd /tmp
echo "Downloading SoapyIris"
rm -rf /tmp/sklk-soapyiris
git clone -b soapy-iris-2018.08.0.1 --single-branch https://github.com/skylarkwireless/sklk-soapyiris.git
cd sklk-soapyiris
mkdir -p build
cd build
$CMAKE ../
echo "Compiling SoapyIris"
make -j`nproc`
$SUDO make install
$SUDO ldconfig
}
check_install_soapy () {
#if [[ "$OS_DISTRO" == "ubuntu" ]]; then
#first we remove old installation
$SUDO apt-get remove -y soapysdr soapysdr-server libsoapysdr-dev python-soapysdr python3-soapysdr soapysdr-module-remote || true
#$SUDO add-apt-repository -y ppa:myriadrf/drivers
#$SUDO apt-get update
#$SUDO apt-get install -y soapysdr soapysdr-server libsoapysdr-dev python-soapysdr python3-soapysdr soapysdr-module-remote
#elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
# $SUDO $INSTALLER -y install software-properties-common python3-software-properties python-software-properties subversion git python3 python-numpy python3-numpy cmake swig python-dev
install_soapy_from_source
#fi
install_soapy_iris_from_source
}
check_install_additional_tools (){
$SUDO $INSTALLER update -y
local optional_packages=""
if [[ "$OS_BASEDISTRO" == "debian" ]]; then
case "$(get_distribution_release)" in
"ubuntu20.04" | "ubuntu22.04" | "debian11" )
optional_packages="python3 python3-pip python3-dev python3-scipy python3-matplotlib python3-pyroute2 universal-ctags"
;;
esac
PACKAGE_LIST="\
doxygen \
libgnutls28-dev \
libpthread-stubs0-dev \
tshark \
uml-utilities \
iperf3 \
libforms-bin \
libforms-dev \
libxft-dev \
libpcre3-dev \
libssh-dev \
libxml2-dev"
elif [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]] || [[ "$OS_DISTRO" == "rocky" ]] || [[ "$OS_DISTRO" == "fedora" ]]; then
PACKAGE_LIST="\
doxygen \
ctags \
iperf3 \
gnutls-devel \
libXft-devel \
xforms \
xforms-devel \
pcre-devel \
libssh-devel \
libxml2-devel"
fi
$SUDO $INSTALLER install -y $PACKAGE_LIST $optional_packages
}
check_install_oai_software() {
local specific_packages=""
if ! check_supported_distribution; then
echo_error "Your distribution $(get_distribution_release) is not supported by oai !"
exit 1
fi
$SUDO $INSTALLER update -y
if [[ "$OS_BASEDISTRO" == "debian" ]]; then
$SUDO apt install -y software-properties-common
case "$(get_distribution_release)" in
"debian11")
specific_packages="libz-dev"
;;
esac
$SUDO apt-get install -y \
$specific_packages \
automake \
build-essential \
$CMAKE \
ninja-build \
pkg-config \
git \
libblas-dev \
liblapack-dev \
liblapacke-dev \
libreadline-dev \
libconfig-dev \
libsctp-dev \
libssl-dev \
libtool \
patch \
openssl \
zlib1g-dev \
xxd \
libyaml-cpp-dev
elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]] || [[ "$OS_DISTRO" == "rocky" ]]; then
if rpm -q epel-release > /dev/null; then
echo "EPEL repos already present. Good."
else
echo "EPEL repos not present. Installing them."
$SUDO $INSTALLER install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-9.noarch.rpm
fi
fi
$SUDO $INSTALLER install -y \
automake \
$CMAKE \
gcc \
gcc-c++ \
git \
pkgconfig \
libconfig-devel \
lksctp-tools \
lksctp-tools-devel \
libtool \
ninja-build \
make \
openssl-devel \
patch \
readline-devel \
lapack \
lapack-devel \
blas \
blas-devel \
vim-common \
zlib-devel \
yaml-cpp-devel
fi
install_asn1c_from_source $1
install_simde_from_source $1
}
install_asn1c_from_source(){
echo_info "\nInstalling ASN1."
$SUDO $INSTALLER -y install bison flex
$SUDO rm -rf /tmp/asn1c
# GIT_SSL_NO_VERIFY=true git clone https://gitlab.eurecom.fr/oai/asn1c.git /tmp/asn1c
git clone https://github.com/mouse07410/asn1c /tmp/asn1c
cd /tmp/asn1c
#git checkout vlm_master
# hotfix: current vlm_master (5fa129cf3161da9ff2d67341e6277e818c0f5d6a)
# breaks F1, NG, so use the one before.
git checkout 940dd5fa9f3917913fd487b13dfddfacd0ded06e
# Showing which version is used
git log -n1
autoreconf -iv
./configure --prefix /opt/asn1c/
make -j`nproc`
$SUDO make install
cd -
$SUDO ldconfig
if [[ -v CI_ENV ]]; then
$SUDO rm -rf /tmp/asn1c
fi
}
install_simde_from_source(){
echo_info "\nInstalling SIMDE from source without test cases (header files only)"
cd /tmp
$SUDO rm -rf /tmp/simde
git clone https://github.com/simd-everywhere/simde-no-tests.git /tmp/simde
cd /tmp/simde
# we can specify a given version of SIMDE (sha-one or tag)
if [[ -v SIMDE_VERSION ]]; then
git checkout -f $SIMDE_VERSION
else
# At time of writing, last working commit for OAI: c7f26b7
git checkout c7f26b73ba8e874b95c2cec2b497826ad2188f68
fi
# Showing which version is used
git log -n1
# brute force copy into /usr/include
$SUDO \cp -rv ../simde /usr/include
}
install_lttng() {
if [[ "$OS_DISTRO" != "ubuntu" ]]; then
echo_info "LTTng is supported only for ubuntu at the moment."
echo_info $distribution
return
fi
set +e
$SUDO apt-add-repository ppa:lttng/stable-2.13 -y && apt-get update
$SUDO apt-get install -y lttng-tools lttng-modules-dkms liblttng-ust-dev
if [[ $? > 0 ]]; then
echo "Failed to install LTTng using apt. Installing from source"
install_lttng_deps
install_lttng_from_source
fi
set -e
}
install_lttng_deps() {
echo "installing dependencies of LTTng"
$SUDO apt-get install uuid-dev libxml2-dev -y
}
install_lttng_from_source() {
echo "installing LTTng from source"
install_popt_1_18_from_source
install_userspace_rcu
install_lttng_ust_2_13_from_source
install_lttng_tools_2_13_from_source
}
install_popt_1_18_from_source() {
$SUDO $INSTALLER -y install wget
echo_info "\nInstalling popt_1_18."
cd $(mktemp -d) &&
wget http://ftp.rpm.org/popt/releases/popt-1.x/popt-1.18.tar.gz
tar -xf popt-1.18.tar.gz && cd popt-1.18
./configure && make -j16 && $SUDO make install
}
install_userspace_rcu() {
echo_info "\nInstalling U-RCU from source."
cd /tmp
$SUDO rm -rf /tmp/urcu
git clone https://github.com/urcu/userspace-rcu.git /tmp/urcu
cd /tmp/urcu
git checkout stable-0.12
./bootstrap && ./configure && make
$SUDO make install
$SUDO ldconfig
}
install_lttng_modules_2_13_from_source() {
$SUDO $INSTALLER -y install wget
echo_info "\nInstalling LTTng Modules."
cd $(mktemp -d) &&
wget https://lttng.org/files/lttng-modules/lttng-modules-latest-2.13.tar.bz2 &&
tar -xf lttng-modules-latest-2.13.tar.bz2 &&
cd lttng-modules-2.13.* &&
make &&
$SUDO make modules_install &&
$SUDO depmod -a
}
install_lttng_ust_2_13_from_source() {
$SUDO $INSTALLER -y install wget
echo_info "\nInstalling LTTng UST."
cd $(mktemp -d) &&
wget https://lttng.org/files/lttng-ust/lttng-ust-latest-2.13.tar.bz2 &&
tar -xf lttng-ust-latest-2.13.tar.bz2 &&
cd lttng-ust-2.13.* &&
./configure --disable-numa &&
make &&
$SUDO make install &&
$SUDO ldconfig
}
install_lttng_tools_2_13_from_source() {
$SUDO $INSTALLER -y install wget
echo_info "\nInstalling LTTng Tools."
cd $(mktemp -d) &&
wget https://lttng.org/files/lttng-tools/lttng-tools-latest-2.13.tar.bz2 &&
tar -xf lttng-tools-latest-2.13.tar.bz2 &&
cd lttng-tools-2.13.* &&
./configure &&
make &&
$SUDO make install &&
$SUDO ldconfig
}
#################################################
# 2. compile
################################################
install_nas_tools() {
echo_success "generate .ue_emm.nvram .ue.nvram"
./nvram --gen -c $1 -o $2 > "$3"
echo_success "generate .usim.nvram"
./usim --gen -c $1 -o $2 >> "$3"
}
################################
# set_openair_env
###############################
set_openair_env(){
fullpath=`readlink -f $BASH_SOURCE`
[ -f "/.$fullpath" ] || fullpath=`readlink -f $PWD/$fullpath`
openair_path=${fullpath%/cmake_targets/*}
openair_path=${openair_path%/targets/*}
openair_path=${openair_path%/openair[123]/*}
export OPENAIR_DIR=$openair_path
export OPENAIR1_DIR=$openair_path/openair1
export OPENAIR2_DIR=$openair_path/openair2
export OPENAIR3_DIR=$openair_path/openair3
export OPENAIR_TARGETS=$openair_path/targets
}
Reference in New Issue View Git Blame Copy Permalink