Cedric Roux
56c66c09aa
Pre-ci test passed git-svn-id: http://svn.eurecom.fr/openair4G/trunk@4000 818b1a75-f10b-46b9-bf7c-635c3b92a50f
99 lines
2.6 KiB
C
99 lines
2.6 KiB
C
#include<stdio.h>
|
|
#include<string.h>
|
|
#include<gpib/ib.h>
|
|
#include "signalanalyzer.h"
|
|
|
|
void gpib_send(unsigned int gpib_card, unsigned int gpib_device, char *command_string )
|
|
{
|
|
unsigned short addlist[2] ={gpib_device, NOADDR};
|
|
SendIFC(gpib_card);
|
|
|
|
//Enable all on GPIB bus
|
|
EnableRemote(gpib_card, addlist);
|
|
|
|
|
|
if(ibsta & ERR)
|
|
{
|
|
printf("gpib_send: Instrument enable failed! \n");
|
|
}
|
|
|
|
//Send Control Commandss
|
|
Send(gpib_card, gpib_device, command_string, strlen(command_string), NLend);
|
|
|
|
if(ibsta & ERR)
|
|
{
|
|
|
|
printf("gpib_send: Send failed! \n");
|
|
|
|
}
|
|
printf("%s \n",command_string);
|
|
|
|
}
|
|
|
|
|
|
void analyzer(unsigned int gpib_card,unsigned int gpib_device,unsigned int freqband,LTE_DL_FRAME_PARMS *frame_parms,DCI_ALLOC_t *dci_alloc)
|
|
{
|
|
char string[256];
|
|
|
|
//Start the remote control
|
|
gpib_send(gpib_card,gpib_device,"*RST;*CLS"); //reset and configure the signal analyzer
|
|
gpib_send(gpib_card,gpib_device,"CONF:PRES");
|
|
|
|
|
|
gpib_send(gpib_card,gpib_device,"CALC1:FEED 'CONS:CONS'");
|
|
gpib_send(gpib_card,gpib_device,"INIT");
|
|
|
|
|
|
//select the duplexing mode
|
|
if (frame_parms->frame_type == 0)
|
|
gpib_send(gpib_card,gpib_device,"CONF:DUPL FDD");
|
|
else
|
|
gpib_send(gpib_card,gpib_device,"CONF:DUPL TDD");
|
|
|
|
//set the direction into DL
|
|
gpib_send(gpib_card,gpib_device,"CONF:LDIR DL");
|
|
|
|
//carrier frequency
|
|
gpib_send(gpib_card,gpib_device,"FREQ:CENT 1.2GHZ");
|
|
|
|
//input source
|
|
gpib_send(gpib_card,gpib_device,"INP RF");
|
|
|
|
//RF attenuation
|
|
gpib_send(gpib_card,gpib_device,"INP:ATT 0");
|
|
|
|
////Using a Trigger
|
|
gpib_send(gpib_card,gpib_device,"TRIG:MODE IMM"); //Selects free run trigger source
|
|
|
|
// number of frames to be selected
|
|
gpib_send(gpib_card,gpib_device,"FRAM:COUN:STAT ON");
|
|
gpib_send(gpib_card,gpib_device,"FRAM:COUN 4");
|
|
|
|
//select all the subframes
|
|
gpib_send(gpib_card,gpib_device,"SUBF:SEL ALL");
|
|
|
|
//Identifies the configuration according to the data in the PDCCH DCIs
|
|
gpib_send(gpib_card,gpib_device,"DL:FORM:PSCD PDCCH");
|
|
|
|
//sets the number of resource blocks to 25
|
|
sprintf(string,"CONF:DL:NORB %d",frame_parms->N_RB_DL);
|
|
gpib_send(gpib_card,gpib_device,string);
|
|
|
|
|
|
//set the prefix of the subframes
|
|
if (frame_parms->Ncp == 0)
|
|
gpib_send(gpib_card,gpib_device,"CONF:DL:CYCP NORM");
|
|
else
|
|
gpib_send(gpib_card,gpib_device,"CONF:DL:CYCP EXT");
|
|
|
|
//select the UL/DL subframe configuration for downlink signals
|
|
sprintf(string,"CONF:DL:TDD:UDC %d",frame_parms->tdd_config);
|
|
gpib_send(gpib_card,gpib_device,string); //sets the UL/DL configuration into 3
|
|
|
|
//Selects the configuration of a TDD special subframe
|
|
sprintf(string,"CONF:DL:TDD:UDC %d",frame_parms->tdd_config_S);
|
|
gpib_send(gpib_card,gpib_device,string); //sets the special subframe configuration into 0
|
|
|
|
|
|
}
|