Florian Kaltenberger
842258c6dc
git-svn-id: http://svn.eurecom.fr/openair4G/trunk@5145 818b1a75-f10b-46b9-bf7c-635c3b92a50f
66 lines
2.3 KiB
Matlab
66 lines
2.3 KiB
Matlab
%addpath('../../../openair1/SIMULATION/LTE_PHY/')
|
|
%addpath('../../../openair1/PHY/LTE_ESTIMATION/')
|
|
%addpath('../../../openair1/PHY/LTE_REFSIG/')
|
|
%addpath('../../../targets/ARCH/EXMIMO/USERSPACE/OCTAVE')
|
|
|
|
rng(42); %make sure seed random numbers are alwyas the same
|
|
|
|
% load the LTE sync sequence
|
|
primary_synch;
|
|
|
|
%% this generates one LTE frame (10ms) full of OFDM modulated random QPSK symbols
|
|
|
|
nb_rb = 100; %this can be 25, 50, or 100
|
|
num_carriers = 2048/100*nb_rb;
|
|
num_zeros = num_carriers-(12*nb_rb+1);
|
|
prefix_length = num_carriers/4; %this is extended CP
|
|
num_symbols_frame = 120;
|
|
preamble_length = 120;
|
|
|
|
[s1,f1] = OFDM_TX_FRAME(num_carriers,num_zeros,prefix_length,num_symbols_frame,preamble_length);
|
|
% scale to conserve energy (Matlabs IFFT does not scale)
|
|
s1=s1*sqrt(num_carriers);
|
|
|
|
% upsample PSS to the right frequency and insert it in the first symbol of the frame
|
|
|
|
pss0_up = interp(primary_synch0_time,num_carriers/128);
|
|
pss0_up_cp = [pss0_up(num_carriers-prefix_length+1:end) pss0_up];
|
|
|
|
s1(1:num_carriers+prefix_length) = pss0_up_cp;
|
|
|
|
%% and now the other carrier
|
|
nb_rb = 50; %this can be 25, 50, or 100
|
|
num_carriers = 2048/100*nb_rb;
|
|
num_zeros = num_carriers-(12*nb_rb+1);
|
|
prefix_length = num_carriers/4; %this is extended CP
|
|
|
|
[s2,f2] = OFDM_TX_FRAME(num_carriers,num_zeros,prefix_length,num_symbols_frame,preamble_length);
|
|
% scale to conserve energy (Matlabs IFFT does not scale)
|
|
s2=s2*sqrt(num_carriers);
|
|
|
|
% upsample PSS to the right frequency and insert it in the first symbol of the frame
|
|
|
|
pss0_up = interp(primary_synch0_time,num_carriers/128);
|
|
pss0_up_cp = [pss0_up(num_carriers-prefix_length+1:end) pss0_up];
|
|
|
|
s2(1:num_carriers+prefix_length) = pss0_up_cp;
|
|
|
|
%% combine the two carriers
|
|
f1_shift = -5e6;
|
|
f2_shift = 10e6;
|
|
sample_rate = 30.72e6*2;
|
|
s1_up = interp(s1,2);
|
|
s1_shift = s1_up .* exp(2*1i*pi*f1_shift*(0:length(s1_up)-1)/sample_rate);
|
|
s2_up = interp(s2,4);
|
|
s2_shift = s2_up .* exp(2*1i*pi*f2_shift*(0:length(s2_up)-1)/sample_rate);
|
|
s = s1_shift + s2_shift/sqrt(2);
|
|
|
|
%%
|
|
figure(1)
|
|
hold off
|
|
plot(linspace(-sample_rate/2,sample_rate/2,length(s)),20*log10(abs(fftshift(fft(s)))))
|
|
|
|
%% save for later use (channel estimation and transmission with the SMBV)
|
|
save('ofdm_pilots_sync_30MHz.mat','-v7','s','f1','f2','num_carriers','num_zeros','prefix_length','num_symbols_frame','preamble_length');
|
|
mat2wv(s, 'ofdm_pilots_sync_30MHz.wv', sample_rate, 1);
|