58 lines
2.0 KiB
Bash
58 lines
2.0 KiB
Bash
#!/bin/bash
|
|
|
|
PCI=`lspci -m | grep Xilinx`
|
|
if [ -z "$PCI" ]; then
|
|
echo "No card found. Stopping!"
|
|
return
|
|
fi
|
|
|
|
## This part corrects the wrong configuration of the endpoint done by the bios in some machines
|
|
echo "$PCI" | while read config_reg; do
|
|
SLOT_NUMBER=`echo $config_reg | awk -F\" '{print $1}'`
|
|
sudo setpci -s $SLOT_NUMBER 60.b=10
|
|
done
|
|
|
|
sudo rmmod openair_rf
|
|
sudo insmod $OPENAIR_TARGETS/ARCH/EXMIMO/DRIVER/eurecom/openair_rf.ko
|
|
sleep 1
|
|
|
|
if [ ! -e /dev/openair0 ]; then
|
|
sudo mknod /dev/openair0 c 127 0
|
|
sudo chmod a+rw /dev/openair0
|
|
fi
|
|
|
|
DEVICE=`echo $PCI | awk -F\" '{print $(NF-1)}' | awk '{print $2}'`
|
|
if [ $DEVICE == '2208' ]; then
|
|
echo "Using firmware version 8"
|
|
$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2
|
|
else
|
|
if [ $DEVICE == '2209' ]; then
|
|
echo "Using firmware version 9"
|
|
#$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR0_DIR/express-mimo/software/sdr/exmimo2/sdr_expressmimo2
|
|
$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2_v9
|
|
else
|
|
if [ $DEVICE == '220a' ]; then
|
|
echo "Using firware version 10"
|
|
$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2_v10
|
|
else
|
|
echo 'No corresponding firmware found'
|
|
return
|
|
fi
|
|
fi
|
|
fi
|
|
|
|
sudo rmmod nasmesh
|
|
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
|
|
|
|
if [ "$1" = "eNB" ]; then
|
|
echo "bring up oai0 interface for enb"
|
|
sudo ifconfig oai0 10.0.1.1 netmask 255.255.255.0 broadcast 10.0.1.255
|
|
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.1 -t 10.0.1.9 -r 3
|
|
else
|
|
if [ "$1" = "UE" ]; then
|
|
echo "bring up oai0 interface for UE"
|
|
sudo ifconfig oai0 10.0.1.9 netmask 255.255.255.0 broadcast 10.0.1.255
|
|
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.9 -t 10.0.1.1 -r 3
|
|
fi
|
|
fi
|