660 lines
20 KiB
C
660 lines
20 KiB
C
/*
|
|
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
|
|
* contributor license agreements. See the NOTICE file distributed with
|
|
* this work for additional information regarding copyright ownership.
|
|
* The OpenAirInterface Software Alliance licenses this file to You under
|
|
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
|
|
* except in compliance with the License.
|
|
* You may obtain a copy of the License at
|
|
*
|
|
* http://www.openairinterface.org/?page_id=698
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*-------------------------------------------------------------------------------
|
|
* For more information about the OpenAirInterface (OAI) Software Alliance:
|
|
* contact@openairinterface.org
|
|
*/
|
|
|
|
#include <string.h>
|
|
#include <math.h>
|
|
#include <unistd.h>
|
|
|
|
#include "common/config/config_userapi.h"
|
|
#include "common/utils/LOG/log.h"
|
|
#include "common/ran_context.h"
|
|
|
|
#include "SIMULATION/TOOLS/sim.h"
|
|
#include "SIMULATION/RF/rf.h"
|
|
#include "PHY/types.h"
|
|
#include "PHY/defs_gNB.h"
|
|
#include "PHY/defs_nr_UE.h"
|
|
#include "SCHED_NR/sched_nr.h"
|
|
#include "SCHED_NR_UE/phy_frame_config_nr.h"
|
|
#include "PHY/phy_vars_nr_ue.h"
|
|
|
|
#include "PHY/NR_REFSIG/refsig_defs_ue.h"
|
|
#include "PHY/NR_REFSIG/nr_mod_table.h"
|
|
#include "PHY/MODULATION/modulation_eNB.h"
|
|
#include "PHY/MODULATION/modulation_UE.h"
|
|
#include "PHY/INIT/phy_init.h"
|
|
#include "PHY/NR_TRANSPORT/nr_transport.h"
|
|
#include "PHY/NR_UE_TRANSPORT/nr_transport_proto_ue.h"
|
|
#include "OCG_vars.h"
|
|
|
|
#include <pthread.h>
|
|
|
|
PHY_VARS_gNB *gNB;
|
|
PHY_VARS_NR_UE *UE;
|
|
RAN_CONTEXT_t RC;
|
|
RU_t *ru;
|
|
|
|
double cpuf;
|
|
|
|
extern uint16_t prach_root_sequence_map0_3[838];
|
|
|
|
void dump_nr_prach_config(NR_DL_FRAME_PARMS *frame_parms,uint8_t subframe);
|
|
|
|
uint16_t NB_UE_INST=1;
|
|
volatile int oai_exit=0;
|
|
|
|
void exit_function(const char* file, const char* function, const int line,const char *s) {
|
|
const char * msg= s==NULL ? "no comment": s;
|
|
printf("Exiting at: %s:%d %s(), %s\n", file, line, function, msg);
|
|
exit(-1);
|
|
}
|
|
|
|
|
|
int8_t nr_ue_get_SR(module_id_t module_idP, int CC_id, frame_t frameP, uint8_t eNB_id, uint16_t rnti, sub_frame_t subframe) {
|
|
AssertFatal(1==0,"Shouldn't be here ...\n");
|
|
return 0;
|
|
}
|
|
|
|
int oai_nfapi_rach_ind(nfapi_rach_indication_t *rach_ind) {return(0);}
|
|
|
|
openair0_config_t openair0_cfg[MAX_CARDS];
|
|
uint8_t nfapi_mode=0;
|
|
NR_IF_Module_t *NR_IF_Module_init(int Mod_id){return(NULL);}
|
|
int oai_nfapi_ul_config_req(nfapi_ul_config_request_t *ul_config_req) { return(0); }
|
|
|
|
|
|
int main(int argc, char **argv)
|
|
{
|
|
|
|
char c;
|
|
|
|
int i,aa,aarx;
|
|
double sigma2, sigma2_dB=0,SNR,snr0=-2.0,snr1=0.0,ue_speed0=0.0,ue_speed1=0.0;
|
|
uint8_t snr1set=0;
|
|
uint8_t ue_speed1set=0;
|
|
int **txdata;
|
|
double **s_re,**s_im,**r_re,**r_im;
|
|
double iqim=0.0;
|
|
int trial; //, ntrials=1;
|
|
uint8_t transmission_mode = 1,n_tx=1,n_rx=1;
|
|
uint16_t Nid_cell=0;
|
|
|
|
uint8_t awgn_flag=0;
|
|
uint8_t hs_flag=0;
|
|
int n_frames=1;
|
|
channel_desc_t *UE2gNB;
|
|
uint32_t nsymb,tx_lev; //,tx_lev_dB;
|
|
// int8_t interf1=-19,interf2=-19;
|
|
NR_DL_FRAME_PARMS *frame_parms;
|
|
|
|
SCM_t channel_model=Rayleigh1;
|
|
|
|
// uint8_t abstraction_flag=0,calibration_flag=0;
|
|
// double prach_sinr;
|
|
int N_RB_UL=273;
|
|
uint32_t prach_errors=0;
|
|
uint8_t subframe=9;
|
|
uint16_t preamble_energy, preamble_tx=50, preamble_delay;
|
|
uint16_t preamble_max,preamble_energy_max;
|
|
PRACH_RESOURCES_t prach_resources;
|
|
//uint8_t prach_fmt;
|
|
//int N_ZC;
|
|
int delay = 0;
|
|
double delay_avg=0;
|
|
double ue_speed = 0;
|
|
int NCS_config = 13,rootSequenceIndex=0;
|
|
int threequarter_fs = 0;
|
|
int mu=1;
|
|
uint64_t SSB_positions=0x01;
|
|
|
|
int loglvl=OAILOG_INFO;
|
|
|
|
cpuf = get_cpu_freq_GHz();
|
|
|
|
|
|
if ( load_configmodule(argc,argv,CONFIG_ENABLECMDLINEONLY) == 0) {
|
|
exit_fun("[SOFTMODEM] Error, configuration module init failed\n");
|
|
}
|
|
|
|
randominit(0);
|
|
|
|
|
|
while ((c = getopt (argc, argv, "hHaA:Cr:p:g:n:s:S:t:x:y:v:V:z:N:F:d:Z:L:R:E")) != -1) {
|
|
switch (c) {
|
|
case 'a':
|
|
printf("Running AWGN simulation\n");
|
|
awgn_flag = 1;
|
|
/* ntrials not used later, no need to set */
|
|
//ntrials=1;
|
|
break;
|
|
|
|
case 'd':
|
|
delay = atoi(optarg);
|
|
break;
|
|
|
|
case 'g':
|
|
switch((char)*optarg) {
|
|
case 'A':
|
|
channel_model=SCM_A;
|
|
break;
|
|
|
|
case 'B':
|
|
channel_model=SCM_B;
|
|
break;
|
|
|
|
case 'C':
|
|
channel_model=SCM_C;
|
|
break;
|
|
|
|
case 'D':
|
|
channel_model=SCM_D;
|
|
break;
|
|
|
|
case 'E':
|
|
channel_model=EPA;
|
|
break;
|
|
|
|
case 'F':
|
|
channel_model=EVA;
|
|
break;
|
|
|
|
case 'G':
|
|
channel_model=ETU;
|
|
break;
|
|
|
|
case 'H':
|
|
channel_model=Rayleigh8;
|
|
|
|
case 'I':
|
|
channel_model=Rayleigh1;
|
|
|
|
case 'J':
|
|
channel_model=Rayleigh1_corr;
|
|
|
|
case 'K':
|
|
channel_model=Rayleigh1_anticorr;
|
|
|
|
case 'L':
|
|
channel_model=Rice8;
|
|
|
|
case 'M':
|
|
channel_model=Rice1;
|
|
|
|
case 'N':
|
|
channel_model=Rayleigh1_800;
|
|
break;
|
|
|
|
default:
|
|
msg("Unsupported channel model!\n");
|
|
exit(-1);
|
|
}
|
|
|
|
break;
|
|
|
|
case 'E':
|
|
threequarter_fs=1;
|
|
break;
|
|
|
|
case 'n':
|
|
n_frames = atoi(optarg);
|
|
break;
|
|
|
|
case 's':
|
|
snr0 = atof(optarg);
|
|
msg("Setting SNR0 to %f\n",snr0);
|
|
break;
|
|
|
|
case 'S':
|
|
snr1 = atof(optarg);
|
|
snr1set=1;
|
|
msg("Setting SNR1 to %f\n",snr1);
|
|
break;
|
|
|
|
case 'p':
|
|
preamble_tx=atoi(optarg);
|
|
break;
|
|
|
|
case 'v':
|
|
ue_speed0 = atoi(optarg);
|
|
break;
|
|
|
|
case 'V':
|
|
ue_speed1 = atoi(optarg);
|
|
ue_speed1set = 1;
|
|
break;
|
|
|
|
case 'Z':
|
|
NCS_config = atoi(optarg);
|
|
|
|
if ((NCS_config > 15) || (NCS_config < 0))
|
|
printf("Illegal NCS_config %d, (should be 0-15)\n",NCS_config);
|
|
|
|
break;
|
|
|
|
case 'H':
|
|
printf("High-Speed Flag enabled\n");
|
|
hs_flag = 1;
|
|
break;
|
|
|
|
case 'L':
|
|
rootSequenceIndex = atoi(optarg);
|
|
|
|
if ((rootSequenceIndex < 0) || (rootSequenceIndex > 837))
|
|
printf("Illegal rootSequenceNumber %d, (should be 0-837)\n",rootSequenceIndex);
|
|
|
|
break;
|
|
|
|
case 'x':
|
|
transmission_mode=atoi(optarg);
|
|
|
|
if ((transmission_mode!=1) &&
|
|
(transmission_mode!=2) &&
|
|
(transmission_mode!=6)) {
|
|
msg("Unsupported transmission mode %d\n",transmission_mode);
|
|
exit(-1);
|
|
}
|
|
|
|
break;
|
|
|
|
case 'y':
|
|
n_tx=atoi(optarg);
|
|
|
|
if ((n_tx==0) || (n_tx>2)) {
|
|
msg("Unsupported number of tx antennas %d\n",n_tx);
|
|
exit(-1);
|
|
}
|
|
|
|
break;
|
|
|
|
case 'z':
|
|
n_rx=atoi(optarg);
|
|
|
|
if ((n_rx==0) || (n_rx>2)) {
|
|
msg("Unsupported number of rx antennas %d\n",n_rx);
|
|
exit(-1);
|
|
}
|
|
|
|
break;
|
|
|
|
case 'N':
|
|
Nid_cell = atoi(optarg);
|
|
break;
|
|
|
|
case 'R':
|
|
N_RB_UL = atoi(optarg);
|
|
break;
|
|
|
|
case 'F':
|
|
break;
|
|
|
|
default:
|
|
case 'h':
|
|
printf("%s -h(elp) -a(wgn on) -p(extended_prefix) -N cell_id -f output_filename -F input_filename -g channel_model -n n_frames -s snr0 -S snr1 -x transmission_mode -y TXant -z RXant -i Intefrence0 -j Interference1 -A interpolation_file -C(alibration offset dB) -N CellId\n",
|
|
argv[0]);
|
|
printf("-h This message\n");
|
|
printf("-a Use AWGN channel and not multipath\n");
|
|
printf("-n Number of frames to simulate\n");
|
|
printf("-s Starting SNR, runs from SNR0 to SNR0 + 5 dB. If n_frames is 1 then just SNR is simulated\n");
|
|
printf("-S Ending SNR, runs from SNR0 to SNR1\n");
|
|
printf("-g [A,B,C,D,E,F,G,I,N] Use 3GPP SCM (A,B,C,D) or 36-101 (E-EPA,F-EVA,G-ETU) or Rayleigh1 (I) or Rayleigh1_800 (N) models (ignores delay spread and Ricean factor)\n");
|
|
printf("-z Number of RX antennas used in gNB\n");
|
|
printf("-N Nid_cell\n");
|
|
printf("-O oversampling factor (1,2,4,8,16)\n");
|
|
// printf("-f PRACH format (0=1,1=2,2=3,3=4)\n");
|
|
printf("-d Channel delay \n");
|
|
printf("-v Starting UE velocity in km/h, runs from 'v' to 'v+50km/h'. If n_frames is 1 just 'v' is simulated \n");
|
|
printf("-V Ending UE velocity in km/h, runs from 'v' to 'V'");
|
|
printf("-L rootSequenceIndex (0-837)\n");
|
|
printf("-Z NCS_config (ZeroCorrelationZone) (0-15)\n");
|
|
printf("-H Run with High-Speed Flag enabled \n");
|
|
printf("-R Number of PRB (6,15,25,50,75,100)\n");
|
|
printf("-F Input filename (.txt format) for RX conformance testing\n");
|
|
exit (-1);
|
|
break;
|
|
}
|
|
}
|
|
|
|
logInit();
|
|
|
|
set_glog(loglvl);
|
|
T_stdout = 1;
|
|
|
|
SET_LOG_DEBUG(PRACH);
|
|
|
|
if (snr1set==0) {
|
|
if (n_frames==1)
|
|
snr1 = snr0+.1;
|
|
else
|
|
snr1 = snr0+5.0;
|
|
}
|
|
|
|
RC.gNB = (PHY_VARS_gNB**) malloc(2*sizeof(PHY_VARS_gNB *));
|
|
RC.gNB[0] = malloc(sizeof(PHY_VARS_gNB));
|
|
memset(RC.gNB[0],0,sizeof(PHY_VARS_gNB));
|
|
|
|
RC.ru = (RU_t**) malloc(2*sizeof(RU_t *));
|
|
RC.ru[0] = (RU_t*) malloc(sizeof(RU_t ));
|
|
memset(RC.ru[0],0,sizeof(RU_t));
|
|
RC.nb_RU = 1;
|
|
|
|
gNB = RC.gNB[0];
|
|
ru = RC.ru[0];
|
|
|
|
|
|
if (ue_speed1set==0) {
|
|
if (n_frames==1)
|
|
ue_speed1 = ue_speed0+10;
|
|
else
|
|
ue_speed1 = ue_speed0+50;
|
|
}
|
|
|
|
printf("SNR0 %f, SNR1 %f\n",snr0,snr1);
|
|
|
|
frame_parms = &gNB->frame_parms;
|
|
|
|
|
|
|
|
s_re = malloc(2*sizeof(double*));
|
|
s_im = malloc(2*sizeof(double*));
|
|
r_re = malloc(2*sizeof(double*));
|
|
r_im = malloc(2*sizeof(double*));
|
|
|
|
frame_parms = &gNB->frame_parms; //to be initialized I suppose (maybe not necessary for PBCH)
|
|
frame_parms->nb_antennas_tx = n_tx;
|
|
frame_parms->nb_antennas_rx = n_rx;
|
|
frame_parms->N_RB_DL = N_RB_UL;
|
|
frame_parms->N_RB_UL = N_RB_UL;
|
|
frame_parms->threequarter_fs = threequarter_fs;
|
|
|
|
|
|
nr_phy_config_request_sim(gNB,N_RB_UL,N_RB_UL,mu,Nid_cell,SSB_positions);
|
|
|
|
frame_parms->frame_type = TDD;
|
|
frame_parms->freq_range = nr_FR1;
|
|
|
|
nsymb = (frame_parms->Ncp == 0) ? 14 : 12;
|
|
|
|
printf("FFT Size %d, Extended Prefix %d, Samples per subframe %d,Frame type %s, Frequency Range %s\n",NUMBER_OF_OFDM_CARRIERS,
|
|
frame_parms->Ncp,frame_parms->samples_per_slot<<1,frame_parms->frame_type == FDD ? "FDD" : "TDD", frame_parms->freq_range == nr_FR1 ? "FR1" : "FR2");
|
|
|
|
ru->nr_frame_parms=frame_parms;
|
|
ru->if_south = LOCAL_RF;
|
|
ru->nb_tx = n_tx;
|
|
ru->nb_rx = n_rx;
|
|
|
|
RC.nb_nr_L1_inst=1;
|
|
phy_init_nr_gNB(gNB,0,0);
|
|
nr_phy_init_RU(ru);
|
|
set_tdd_config_nr(&gNB->gNB_config, 5000,
|
|
7, 6,
|
|
2, 4);
|
|
|
|
//configure UE
|
|
UE = malloc(sizeof(PHY_VARS_NR_UE));
|
|
memset((void*)UE,0,sizeof(PHY_VARS_NR_UE));
|
|
PHY_vars_UE_g = malloc(2*sizeof(PHY_VARS_NR_UE**));
|
|
PHY_vars_UE_g[0] = malloc(2*sizeof(PHY_VARS_NR_UE*));
|
|
PHY_vars_UE_g[0][0] = UE;
|
|
memcpy(&UE->frame_parms,frame_parms,sizeof(NR_DL_FRAME_PARMS));
|
|
if (init_nr_ue_signal(UE, 1, 0) != 0)
|
|
{
|
|
printf("Error at UE NR initialisation\n");
|
|
exit(-1);
|
|
}
|
|
|
|
txdata = UE->common_vars.txdata;
|
|
printf("txdata %p\n",&txdata[0][subframe*frame_parms->samples_per_slot<<1]);
|
|
|
|
double fs,bw;
|
|
|
|
|
|
bw = N_RB_UL*(180e3)*(1<<gNB->frame_parms.numerology_index);
|
|
AssertFatal(bw<=122.88e6,"Illegal channel bandwidth %f (mu %d,N_RB_UL %d)\n",gNB->frame_parms.numerology_index,N_RB_UL);
|
|
if (bw <= 30.72e6) fs = 30.72e6;
|
|
else if (bw <= 61.44e6) fs = 61.44e6;
|
|
else if (bw <= 122.88e6) fs = 122.88e6;
|
|
LOG_I(PHY,"Running with bandwidth %f Hz, fs %f samp/s, FRAME_LENGTH_COMPLEX_SAMPLES %d\n",bw,fs,FRAME_LENGTH_COMPLEX_SAMPLES);
|
|
|
|
|
|
UE2gNB = new_channel_desc_scm(UE->frame_parms.nb_antennas_tx,
|
|
gNB->frame_parms.nb_antennas_rx,
|
|
channel_model,
|
|
fs,
|
|
bw,
|
|
0.0,
|
|
delay,
|
|
0);
|
|
|
|
if (UE2gNB==NULL) {
|
|
printf("Problem generating channel model. Exiting.\n");
|
|
exit(-1);
|
|
}
|
|
|
|
for (i=0; i<2; i++) {
|
|
|
|
s_re[i] = malloc(FRAME_LENGTH_COMPLEX_SAMPLES*sizeof(double));
|
|
bzero(s_re[i],FRAME_LENGTH_COMPLEX_SAMPLES*sizeof(double));
|
|
s_im[i] = malloc(FRAME_LENGTH_COMPLEX_SAMPLES*sizeof(double));
|
|
bzero(s_im[i],FRAME_LENGTH_COMPLEX_SAMPLES*sizeof(double));
|
|
|
|
r_re[i] = malloc(FRAME_LENGTH_COMPLEX_SAMPLES*sizeof(double));
|
|
bzero(r_re[i],FRAME_LENGTH_COMPLEX_SAMPLES*sizeof(double));
|
|
r_im[i] = malloc(FRAME_LENGTH_COMPLEX_SAMPLES*sizeof(double));
|
|
bzero(r_im[i],FRAME_LENGTH_COMPLEX_SAMPLES*sizeof(double));
|
|
}
|
|
|
|
UE->frame_parms.prach_config_common.rootSequenceIndex=rootSequenceIndex;
|
|
UE->frame_parms.prach_config_common.prach_ConfigInfo.prach_ConfigIndex=98;
|
|
UE->frame_parms.prach_config_common.prach_ConfigInfo.zeroCorrelationZoneConfig=NCS_config;
|
|
UE->frame_parms.prach_config_common.prach_ConfigInfo.highSpeedFlag=hs_flag;
|
|
UE->frame_parms.prach_config_common.prach_ConfigInfo.restrictedSetConfig=0;
|
|
UE->frame_parms.prach_config_common.prach_ConfigInfo.msg1_frequencystart=0;
|
|
|
|
|
|
gNB->frame_parms.prach_config_common.rootSequenceIndex=rootSequenceIndex;
|
|
gNB->frame_parms.prach_config_common.prach_ConfigInfo.prach_ConfigIndex=98;
|
|
gNB->frame_parms.prach_config_common.prach_ConfigInfo.zeroCorrelationZoneConfig=NCS_config;
|
|
gNB->frame_parms.prach_config_common.prach_ConfigInfo.highSpeedFlag=hs_flag;
|
|
gNB->frame_parms.prach_config_common.prach_ConfigInfo.restrictedSetConfig=0;
|
|
gNB->frame_parms.prach_config_common.prach_ConfigInfo.msg1_frequencystart=0;
|
|
|
|
gNB->proc.slot_rx = subframe<<1;
|
|
|
|
gNB->common_vars.rxdata = ru->common.rxdata;
|
|
|
|
|
|
compute_nr_prach_seq(gNB->frame_parms.prach_config_common.rootSequenceIndex,
|
|
gNB->frame_parms.prach_config_common.prach_ConfigInfo.prach_ConfigIndex,
|
|
gNB->frame_parms.prach_config_common.prach_ConfigInfo.zeroCorrelationZoneConfig,
|
|
gNB->frame_parms.prach_config_common.prach_ConfigInfo.highSpeedFlag,
|
|
gNB->frame_parms.frame_type,
|
|
gNB->frame_parms.freq_range,
|
|
gNB->X_u);
|
|
|
|
compute_nr_prach_seq(UE->frame_parms.prach_config_common.rootSequenceIndex,
|
|
UE->frame_parms.prach_config_common.prach_ConfigInfo.prach_ConfigIndex,
|
|
UE->frame_parms.prach_config_common.prach_ConfigInfo.zeroCorrelationZoneConfig,
|
|
UE->frame_parms.prach_config_common.prach_ConfigInfo.highSpeedFlag,
|
|
UE->frame_parms.frame_type,
|
|
UE->frame_parms.freq_range,
|
|
UE->X_u);
|
|
|
|
|
|
|
|
UE->prach_vars[0]->amp = AMP;
|
|
|
|
UE->prach_resources[0] = &prach_resources;
|
|
|
|
if (preamble_tx == 99)
|
|
preamble_tx = (uint16_t)(taus()&0x3f);
|
|
|
|
if (n_frames == 1)
|
|
printf("raPreamble %d\n",preamble_tx);
|
|
|
|
UE->prach_resources[0]->ra_PreambleIndex = preamble_tx;
|
|
UE->prach_resources[0]->ra_TDD_map_index = 0;
|
|
|
|
/*tx_lev = generate_nr_prach(UE,
|
|
0, //gNB_id,
|
|
subframe,
|
|
0); //Nf */ //commented for testing purpose
|
|
|
|
UE_nr_rxtx_proc_t proc={0};
|
|
nr_ue_prach_procedures(UE,&proc,0,0,0);
|
|
|
|
|
|
/* tx_lev_dB not used later, no need to set */
|
|
//tx_lev_dB = (unsigned int) dB_fixed(tx_lev);
|
|
|
|
LOG_M("txsig0.m","txs0", &txdata[0][subframe*frame_parms->samples_per_slot<<1],frame_parms->samples_per_slot<<1,1,1);
|
|
//LOG_M("txsig1.m","txs1", txdata[1],FRAME_LENGTH_COMPLEX_SAMPLES,1,1);
|
|
|
|
// multipath channel
|
|
dump_nr_prach_config(&gNB->frame_parms,subframe);
|
|
|
|
for (i=0; i<2*frame_parms->samples_per_slot<<1; i++) {
|
|
for (aa=0; aa<1; aa++) {
|
|
if (awgn_flag == 0) {
|
|
s_re[aa][i] = ((double)(((short *)&txdata[aa][subframe*frame_parms->samples_per_slot<<1]))[(i<<1)]);
|
|
s_im[aa][i] = ((double)(((short *)&txdata[aa][subframe*frame_parms->samples_per_slot<<1]))[(i<<1)+1]);
|
|
} else {
|
|
for (aarx=0; aarx<gNB->frame_parms.nb_antennas_rx; aarx++) {
|
|
if (aa==0) {
|
|
r_re[aarx][i] = ((double)(((short *)&txdata[aa][subframe*frame_parms->samples_per_slot<<1]))[(i<<1)]);
|
|
r_im[aarx][i] = ((double)(((short *)&txdata[aa][subframe*frame_parms->samples_per_slot<<1]))[(i<<1)+1]);
|
|
} else {
|
|
r_re[aarx][i] += ((double)(((short *)&txdata[aa][subframe*frame_parms->samples_per_slot<<1]))[(i<<1)]);
|
|
r_im[aarx][i] += ((double)(((short *)&txdata[aa][subframe*frame_parms->samples_per_slot<<1]))[(i<<1)+1]);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
|
|
for (SNR=snr0; SNR<snr1; SNR+=.2) {
|
|
for (ue_speed=ue_speed0; ue_speed<ue_speed1; ue_speed+=10) {
|
|
delay_avg = 0.0;
|
|
// max Doppler shift
|
|
UE2gNB->max_Doppler = 1.9076e9*(ue_speed/3.6)/3e8;
|
|
printf("n_frames %d SNR %f\n",n_frames,SNR);
|
|
prach_errors=0;
|
|
|
|
for (trial=0; trial<n_frames; trial++) {
|
|
|
|
sigma2_dB = 10*log10((double)tx_lev) - SNR;
|
|
|
|
if (n_frames==1)
|
|
printf("sigma2_dB %f (SNR %f dB) tx_lev_dB %f\n",sigma2_dB,SNR,10*log10((double)tx_lev));
|
|
|
|
//AWGN
|
|
sigma2 = pow(10,sigma2_dB/10);
|
|
// printf("Sigma2 %f (sigma2_dB %f)\n",sigma2,sigma2_dB);
|
|
|
|
|
|
if (awgn_flag == 0) {
|
|
multipath_tv_channel(UE2gNB,s_re,s_im,r_re,r_im,
|
|
2*frame_parms->samples_per_slot<<1,0);
|
|
}
|
|
|
|
if (n_frames==1) {
|
|
printf("rx_level data symbol %f, tx_lev %f\n",
|
|
10*log10(signal_energy_fp(r_re,r_im,1,OFDM_SYMBOL_SIZE_COMPLEX_SAMPLES,0)),
|
|
10*log10(tx_lev));
|
|
}
|
|
|
|
for (i=0; i<frame_parms->samples_per_slot<<1; i++) {
|
|
for (aa=0; aa<gNB->frame_parms.nb_antennas_rx; aa++) {
|
|
|
|
((short*) &gNB->common_vars.rxdata[aa][subframe*(frame_parms->samples_per_slot<<1)])[2*i] = (short) (.167*(r_re[aa][i] +sqrt(sigma2/2)*gaussdouble(0.0,1.0)));
|
|
((short*) &gNB->common_vars.rxdata[aa][subframe*(frame_parms->samples_per_slot<<1)])[2*i+1] = (short) (.167*(r_im[aa][i] + (iqim*r_re[aa][i]) + sqrt(sigma2/2)*gaussdouble(0.0,1.0)));
|
|
}
|
|
}
|
|
uint16_t preamble_rx;
|
|
rx_nr_prach_ru(ru,
|
|
0,
|
|
subframe);
|
|
gNB->prach_vars.rxsigF = ru->prach_rxsigF;
|
|
|
|
rx_nr_prach(gNB,
|
|
0,
|
|
subframe,
|
|
&preamble_rx,
|
|
&preamble_energy,
|
|
&preamble_delay);
|
|
printf("preamble_rx %d\n", preamble_rx);
|
|
if (preamble_rx!=preamble_tx)
|
|
prach_errors++;
|
|
else {
|
|
delay_avg += (double)preamble_delay;
|
|
}
|
|
|
|
if (n_frames==1) {
|
|
printf("preamble %d (tx %d) : energy %d, delay %d\n",preamble_rx,preamble_tx,preamble_energy,preamble_delay);
|
|
|
|
|
|
LOG_M("prach0.m","prach0", &txdata[0][subframe*frame_parms->samples_per_slot<<1],frame_parms->samples_per_slot<<1,1,1);
|
|
LOG_M("prachF0.m","prachF0", &gNB->prach_vars.prachF[0],24576,1,1);
|
|
LOG_M("rxsig0.m","rxs0",
|
|
&gNB->common_vars.rxdata[0][subframe*frame_parms->samples_per_slot<<1],
|
|
frame_parms->samples_per_slot<<1,1,1);
|
|
LOG_M("rxsigF0.m","rxsF0", gNB->prach_vars.rxsigF[0],839*4,1,1);
|
|
LOG_M("prach_preamble.m","prachp",&gNB->X_u[0],839,1,1);
|
|
}
|
|
}
|
|
|
|
printf("SNR %f dB, UE Speed %f km/h: errors %d/%d (delay %f)\n",SNR,ue_speed,prach_errors,n_frames,delay_avg/(double)(n_frames-prach_errors));
|
|
//printf("(%f,%f)\n",ue_speed,(double)prach_errors/(double)n_frames);
|
|
} // UE Speed loop
|
|
|
|
//printf("SNR %f dB, UE Speed %f km/h: errors %d/%d (delay %f)\n",SNR,ue_speed,prach_errors,n_frames,delay_avg/(double)(n_frames-prach_errors));
|
|
// printf("(%f,%f)\n",SNR,(double)prach_errors/(double)n_frames);
|
|
} //SNR loop
|
|
|
|
|
|
for (i=0; i<2; i++) {
|
|
free(s_re[i]);
|
|
free(s_im[i]);
|
|
free(r_re[i]);
|
|
free(r_im[i]);
|
|
}
|
|
|
|
free(s_re);
|
|
free(s_im);
|
|
free(r_re);
|
|
free(r_im);
|
|
|
|
|
|
return(0);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
for (i=1;i<4;i++)
|
|
memcpy((void *)&PHY_vars->tx_vars[0].TX_DMA_BUFFER[i*12*OFDM_SYMBOL_SIZE_COMPLEX_SAMPLES_NO_PREFIX*2],
|
|
(void *)&PHY_vars->tx_vars[0].TX_DMA_BUFFER[0],
|
|
12*OFDM_SYMBOL_SIZE_SAMPLES_NO_PREFIX*2);
|
|
*/
|
|
|