maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
43828d94cdf4d9efef54ebaacccd31905fb64fe6
openairinterface5g/targets/PROJECTS/GENERIC-LTE-EPC/utils.bash
T
Lionel Gauthier 43828d94cd config string SGI address changed 
git-svn-id: http://svn.eurecom.fr/openair4G/trunk@5392 818b1a75-f10b-46b9-bf7c-635c3b92a50f
2014-06-12 08:50:45 +00:00

1066 lines
38 KiB
Bash
Executable File
Raw Blame History

################################################################################
# Eurecom OpenAirInterface core network
# Copyright(c) 1999 - 2014 Eurecom
#
# This program is free software; you can redistribute it and/or modify it
# under the terms and conditions of the GNU General Public License,
# version 2, as published by the Free Software Foundation.
#
# This program is distributed in the hope it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
#
# You should have received a copy of the GNU General Public License along with
# this program; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
#
# The full GNU General Public License is included in this distribution in
# the file called "COPYING".
#
# Contact Information
# Openair Admin: openair_admin@eurecom.fr
# Openair Tech : openair_tech@eurecom.fr
# Forums : http://forums.eurecom.fsr/openairinterface
# Address : EURECOM,
# Campus SophiaTech,
# 450 Route des Chappes,
# CS 50193
# 06904 Biot Sophia Antipolis cedex,
# FRANCE
################################################################################
# file utils.bash
# brief
# author Lionel Gauthier
# company Eurecom
# email: lionel.gauthier@eurecom.fr
#
cidr2mask() {
local i mask=""
local full_octets=$(($1/8))
local partial_octet=$(($1%8))
for ((i=0;i<4;i+=1)); do
if [ $i -lt $full_octets ]; then
mask+=255
elif [ $i -eq $full_octets ]; then
mask+=$((256 - 2**(8-$partial_octet)))
else
mask+=0
fi
test $i -lt 3 && mask+=.
done
echo $mask
}
# example: netcalc 192.168.12.100 255.255.255.0
netcalc(){
local IFS='.' ip i
local -a oct msk
read -ra oct <<<"$1"
read -ra msk <<<"$2"
for i in ${!oct[@]}; do
ip+=( "$(( oct[i] & msk[i] ))" )
done
echo "${ip[*]}"
}
# example: s
bcastcalc(){
local IFS='.' ip i
local -a oct msk
read -ra oct <<<"$1"
read -ra msk <<<"$2"
for i in ${!oct[@]}; do
ip+=( "$(( oct[i] + ( 255 - ( oct[i] | msk[i] ) ) ))" )
done
echo "${ip[*]}"
}
black='\E[30m'
red='\E[31m'
green='\E[32m'
yellow='\E[33m'
blue='\E[34m'
magenta='\E[35m'
cyan='\E[36m'
white='\E[37m'
reset_color='\E[00m'
ROOT_UID=0
E_NOTROOT=67
HOSTNAME=$(hostname -f)
IPTABLES=`which iptables`
trim ()
{
echo "$1" | sed -n '1h;1!H;${;g;s/^[ \t]*//g;s/[ \t]*$//g;p;}'
}
trim2()
{
local var=$@
var="${var#"${var%%[![:space:]]*}"}" # remove leading whitespace characters
var="${var%"${var##*[![:space:]]}"}" # remove trailing whitespace characters
echo -n "$var"
}
cecho() # Color-echo
# arg1 = message
# arg2 = color
{
local default_msg="No Message."
message=${1:-$default_msg}
color=${2:-$green}
echo -e -n "$color$message$reset_color"
echo
return
}
echo_error() {
local my_string=""
until [ -z "$1" ]
do
my_string="$my_string$1"
shift
done
cecho "$my_string" $red
}
echo_fatal() {
local my_string=""
until [ -z "$1" ]
do
my_string="$my_string$1"
shift
done
echo_error "$my_string"
exit -1
}
echo_warning() {
local my_string=""
until [ -z "$1" ]
do
my_string="$my_string$1"
shift
done
cecho "$my_string" $yellow
}
echo_success() {
local my_string=""
until [ -z "$1" ]
do
my_string="$my_string$1"
shift
done
cecho "$my_string" $green
}
bash_exec() {
output=$($1 2>&1)
result=$?
if [ $result -eq 0 ]
then
echo_success "$1"
else
echo_error "$1: $output"
fi
}
extract() {
if [ -f $1 ] ; then
case $1 in
*.tar.bz2) tar xvjf $1 ;;
*.tar.gz) tar xvzf $1 ;;
*.bz2) bunzip2 $1 ;;
*.rar) unrar $1 ;;
*.gz) gunzip $1 ;;
*.tar) tar xvf $1 ;;
*.tbz2) tar xvjf $1 ;;
*.tgz) tar xvzf $1 ;;
*.zip) unzip $1 ;;
*.Z) uncompress $1 ;;
*.7z) 7z x $1 ;;
*) echo_error "'$1' cannot be extracted via >extract<" ; return 1;;
esac
else
echo_error "'$1' is not a valid file"
return 1
fi
return 0
}
rotate_log_file () {
FULLPATH=$1
if [ -f $FULLPATH ]; then
FILENAME=${FULLPATH##*/}
FILEEXTENSION=${FILENAME##*.}
BASEDIRECTORY=${FULLPATH%$FILENAME}
if [ "a$BASEDIRECTORY" == "a" ]; then
BASEDIRECTORY='.'
fi
FILENAME_NO_EXT=$(echo "$FILENAME" | sed 's/\.[^\.]*$//')
# use file last modification time
TIMESTAMP=`date -r $FULLPATH +%Y-%m-%d.%Hh_%Mm_%Ss`
NEWLOGFILE=$TIMESTAMP.$FILENAME_NO_EXT.$FILEEXTENSION
mv $FULLPATH /tmp/$NEWLOGFILE
cat /dev/null > $FULLPATH
sync
gzip -c --name -f -9 /tmp/$NEWLOGFILE > $BASEDIRECTORY/$NEWLOGFILE.gz &
fi
}
set_openair() {
path=`pwd`
declare -i length_path
declare -i index
length_path=${#path}
for i in 'openair1' 'openair2' 'openair3' 'openair-cn' 'targets'
do
index=`echo $path | grep -b -o $i | cut -d: -f1`
#echo ${path%$token*}
if [[ $index -lt $length_path && index -gt 0 ]]
then
index=`expr $index - 1`
openair_path=`echo $path | cut -c1-$index`
#openair_path=`echo ${path:0:$index}`
export OPENAIR_DIR=$openair_path
export OPENAIR_HOME=$openair_path
export OPENAIR1_DIR=$openair_path/openair1
export OPENAIR2_DIR=$openair_path/openair2
export OPENAIR3_DIR=$openair_path/openair3
export OPENAIRCN_DIR=$openair_path/openair-cn
export OPENAIR_TARGETS=$openair_path/targets
return 0
fi
done
return -1
}
wait_process_started () {
if [ -z "$1" ]
then
echo_error "WAITING FOR PROCESS START: NO PROCESS"
return 1
fi
ps -C $1 > /dev/null 2>&1
while [ $? -ne 0 ]; do
echo_warning "WAITING FOR $1 START"
sleep 2
ps -C $1 > /dev/null 2>&1
done
echo_success "PROCESS $1 STARTED"
return 0
}
is_process_started () {
if [ -z "$1" ]
then
echo_error "WAITING FOR PROCESS START: NO PROCESS"
return 1
fi
ps -C $1 > /dev/null 2>&1
if [ $? -ne 0 ]
then
echo_success "PROCESS $1 NOT STARTED"
return 1
fi
echo_success "PROCESS $1 STARTED"
return 0
}
assert() {
# If condition false
# exit from script with error message
E_PARAM_ERR=98
E_PARAM_FAILED=99
if [ -z "$2" ] # Not enought parameters passed.
then
return $E_PARAM_ERR
fi
lineno=$2
if [ ! $1 ]
then
echo_error "Assertion failed: \"$1\""
echo_fatal "File \"$0\", line $lineno"
fi
}
test_install_package() {
# usage: test_install_package package_name
if [ $# -eq 1 ]; then
dpkg -s "$1" > /dev/null 2>&1 && {
echo "$1 is installed."
} || {
echo "$1 is not installed."
apt-get install --assume-yes $1
}
fi
}
test_command_install_script() {
# usage: test_command_install_script searched_binary script_to_be_invoked_if_binary_not_found
command -v $1 >/dev/null 2>&1 || { echo_warning "Program $1 is not installed. Trying installing it." >&2; bash $2; command -v $1 >/dev/null 2>&1 || { echo_fatal "Program $1 is not installed. Aborting." >&2; };}
echo_success "$1 available"
}
check_for_epc_executable() {
if [ ! -f $OPENAIR3_DIR/OPENAIRMME/objs/OAI_EPC/oai_epc ]
then
echo_error "Cannot find oai_epc executable object in directory $OPENAIR3_DIR/OPENAIRMME/objs/OAI_EPC/"
echo_fatal "Please make sure you have compiled OAI EPC with --enable-standalone-epc option"
fi
}
check_for_sgw_executable() {
if [ ! -f $OPENAIR3_DIR/OPENAIRMME/objs/OAI_SGW/oai_sgw ]
then
echo_error "Cannot find oai_sgw executable object in directory $OPENAIR3_DIR/OPENAIRMME/objs/OAI_SGW/"
echo_fatal "Please make sure you have compiled OAI EPC without --enable-standalone-epc option"
fi
}
check_for_mme_executable() {
if [ ! -f $OPENAIR3_DIR/OPENAIRMME/objs/OAISIM_MME/oaisim_mme ]
then
echo_error "Cannot find oai_sgw executable object in directory $OPENAIR3_DIR/OPENAIRMME/objs/OAISIM_MME/"
echo_fatal "Please make sure you have compiled OAI EPC without --enable-standalone-epc option"
fi
}
check_for_root_rights() {
if [[ $EUID -ne 0 ]]; then
echo_fatal "This script must be run as root" 1>&2
fi
}
is_real_interface() {
my_bool=1
for var in "$@"
do
if [ "a$var" == "a" ]; then
return 0
fi
if [ "a$var" == "anone" ]; then
return 0
fi
IF=`cat /etc/udev/rules.d/70-persistent-net.rules | grep $var | sed 's/^.*NAME=//' | tr -d '"'`
if [ "$IF" == "$var" ]; then
if [ "a${var:0:3}" != "aeth" ]; then
if [ "a${var:0:4}" != "awlan" ]; then
if [ "a${var:0:4}" != "awifi" ]; then
my_bool=0;
fi
fi
fi
fi
done
return $my_bool
}
is_vlan_interface() {
my_bool=1
for var in "$@"
do
if [ "a$var" == "a" ]; then
return 0
fi
if [[ $var == *.* ]]
then
interface_name=`echo $var | cut -f1 -d '.'`
vlan=`echo $var | cut -f2 -d '.'`
IF=`cat /etc/udev/rules.d/70-persistent-net.rules | grep $interface_name | sed 's/^.*NAME=//' | tr -d '"'`
if [ "$IF" == "$interface_name" ]; then
if [ "a${interface_name:0:3}" != "aeth" ]; then
if [ "a${interface_name:0:4}" != "awlan" ]; then
if [ "a${interface_name:0:4}" != "awifi" ]; then
return 0;
fi
fi
fi
fi
else
return 0;
fi
done
return $my_bool
}
is_tun_interface() {
my_bool=1
for var in "$@"
do
if [ "a$var" == "a" ]; then
return 0
fi
bus_info=`ethtool -i $var`
if [[ "$IF" != *tun* ]]; then
return 0;
fi
done
return $my_bool
}
delete_tun_interface() {
is_tun_interface $1
if [ $? -eq 1 ]; then
ip link set $1 down > /dev/null 2>&1
openvpn --mktun --dev $1 > /dev/null 2>&1
fi
}
create_tun_interface() {
openvpn --mktun --dev $1
#ip link set $1 up
}
# arg1 = interface name
# arg2 = ipv4 addr cidr
# arg3 = netmask cidr
set_interface_up() {
interface=$1
address=$2
cidr_netmask=$3
bash_exec "ifconfig $interface up"
sync
netmask=`cidr2mask $cidr_netmask`
broadcast=`bcastcalc $address $netmask`
bash_exec "ip -4 addr add $address/$cidr_netmask broadcast $broadcast dev $interface"
sync
}
build_enb_vlan_network() {
# create vlan interface
is_vlan_interface $ENB_INTERFACE_NAME_FOR_S1_MME
if [ $? -eq 1 ]; then
interface_name=`echo $ENB_INTERFACE_NAME_FOR_S1_MME | cut -f1 -d '.'`
vlan=`echo $ENB_INTERFACE_NAME_FOR_S1_MME | cut -f2 -d '.'`
ifconfig $ENB_INTERFACE_NAME_FOR_S1_MME down > /dev/null 2>&1
vconfig rem $ENB_INTERFACE_NAME_FOR_S1_MME > /dev/null 2>&1
sync
bash_exec "vconfig add $interface_name $vlan"
sync
#bash_exec "ifconfig $ENB_INTERFACE_NAME_FOR_S1_MME up"
#sync
#bash_exec "ip -4 addr add $ENB_IPV4_ADDRESS_FOR_S1_MME/$ENB_IPV4_NETMASK_FOR_S1_MME dev $ENB_INTERFACE_NAME_FOR_S1_MME"
set_interface_up $ENB_INTERFACE_NAME_FOR_S1_MME $ENB_IPV4_ADDRESS_FOR_S1_MME $ENB_IPV4_NETMASK_FOR_S1_MME
else
echo_fatal "BAD INTERFACE NAME FOR ENB S1-MME $ENB_INTERFACE_NAME_FOR_S1_MME"' (waiting for ethx.y, wlanx.y or wifix.y)'
fi;
is_vlan_interface $ENB_INTERFACE_NAME_FOR_S1U
if [ $? -eq 1 ]; then
interface_name=`echo $ENB_INTERFACE_NAME_FOR_S1U | cut -f1 -d '.'`
vlan=`echo $ENB_INTERFACE_NAME_FOR_S1U | cut -f2 -d '.'`
ifconfig $ENB_INTERFACE_NAME_FOR_S1U down > /dev/null 2>&1
vconfig rem $ENB_INTERFACE_NAME_FOR_S1U > /dev/null 2>&1
sync
bash_exec "vconfig add $interface_name $vlan"
sync
#bash_exec "ifconfig $ENB_INTERFACE_NAME_FOR_S1U up"
#sync
#bash_exec "ip -4 addr add $ENB_IPV4_ADDRESS_FOR_S1U/$ENB_IPV4_NETMASK_FOR_S1U dev $ENB_INTERFACE_NAME_FOR_S1U"
set_interface_up $ENB_INTERFACE_NAME_FOR_S1U $ENB_IPV4_ADDRESS_FOR_S1U $ENB_IPV4_NETMASK_FOR_S1U
sync
else
echo_fatal "BAD INTERFACE NAME FOR ENB S1U $ENB_INTERFACE_NAME_FOR_S1U"' (waiting for ethx.y, wlanx.y or wifix.y)'
fi;
}
clean_enb_vlan_network() {
is_vlan_interface $ENB_INTERFACE_NAME_FOR_S1_MME
if [ $? -eq 1 ]; then
echo_success "Found VLAN interface $ENB_INTERFACE_NAME_FOR_S1_MME ... deleting"
ifconfig $ENB_INTERFACE_NAME_FOR_S1_MME down > /dev/null 2>&1
vconfig rem $ENB_INTERFACE_NAME_FOR_S1_MME > /dev/null 2>&1
fi;
is_vlan_interface $ENB_INTERFACE_NAME_FOR_S1U
if [ $? -eq 1 ]; then
echo_success "Found VLAN interface $ENB_INTERFACE_NAME_FOR_S1U ... deleting"
ifconfig $ENB_INTERFACE_NAME_FOR_S1U down > /dev/null 2>&1
vconfig rem $ENB_INTERFACE_NAME_FOR_S1U > /dev/null 2>&1
fi;
sync;
clean_network
}
test_enb_vlan_network() {
# TEST INTERFACES
#ping -q -c 1 $MME_IPV4_ADDRESS_FOR_S1_MME > /dev/null 2>&1
#if [ $? -ne 0 ]; then echo_fatal "PING MME S1_MME ERROR, ADDRESS IS $MME_IPV4_ADDRESS_FOR_S1_MME"; fi;
#ping -q -c 1 $SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP > /dev/null 2>&1
#if [ $? -ne 0 ]; then echo_fatal "PING SGW S1U ERROR, ADDRESS IS $SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP"; fi;
return 0
}
build_mme_spgw_vlan_network() {
# hss.eur
# |
# +-----------+ +-----------+ v +----------+
# | eNB +------+ VLAN 1+------+ MME +----+ +---+ HSS |
# | |ethx.1+------------------+ethy.1| | +------+ | |
# | +------+ +------+ +----+ +---+ |
# | |ethx.2+-------+ | | +----------+
# | +------+ | +-+-------+-+
# | | | | s11mme|
# | | | +---+---+
# | | | (optional)| VLAN 3
# +-----------+ | +---+---+
# | | s11sgw| router.eur
# | +-+-------+-+ | +--------------+
# | | S+P-GW | v | ROUTER |
# | VLAN2 +------+ +-------+ +----+ +----+
# +----------+ethy.2| |sgi +-...-+ | | +---...Internet
# +------+ +-------+ +----+ +----+
# | | 11 VLANS | |
# +-----------+ ids=[5..15] +--------------+
bash_exec "modprobe 8021q"
# create vlan interface
is_vlan_interface $MME_INTERFACE_NAME_FOR_S1_MME
if [ $? -eq 1 ]; then
interface_name=`echo $MME_INTERFACE_NAME_FOR_S1_MME | cut -f1 -d '.'`
vlan=`echo $MME_INTERFACE_NAME_FOR_S1_MME | cut -f2 -d '.'`
ifconfig $MME_INTERFACE_NAME_FOR_S1_MME down > /dev/null 2>&1
vconfig rem $MME_INTERFACE_NAME_FOR_S1_MME > /dev/null 2>&1
sync
bash_exec "vconfig add $interface_name $vlan"
sync
#bash_exec "ifconfig $MME_INTERFACE_NAME_FOR_S1_MME up"
#sync
#"bash_exec "ip -4 addr add $MME_IPV4_ADDRESS_FOR_S1_MME/$MME_IPV4_NETMASK_FOR_S1_MME dev $MME_INTERFACE_NAME_FOR_S1_MME"
set_interface_up $MME_INTERFACE_NAME_FOR_S1_MME $MME_IPV4_ADDRESS_FOR_S1_MME $MME_IPV4_NETMASK_FOR_S1_MME
else
echo_fatal "BAD INTERFACE NAME FOR SGW S1-MME $MME_INTERFACE_NAME_FOR_S1_MME"' (waiting for ethx.y, wlanx.y or wifix.y)'
fi;
is_vlan_interface $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP
if [ $? -eq 1 ]; then
interface_name=`echo $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP | cut -f1 -d '.'`
vlan=`echo $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP | cut -f2 -d '.'`
ifconfig $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP down > /dev/null 2>&1
vconfig rem $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP > /dev/null 2>&1
sync
bash_exec "vconfig add $interface_name $vlan"
sync
#bash_exec "ifconfig $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP up"
#sync
#bash_exec "ip -4 addr add $SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP/$SGW_IPV4_NETMASK_FOR_S1U_S12_S4_UP dev $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP"
#sync
set_interface_up $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP $SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP $SGW_IPV4_NETMASK_FOR_S1U_S12_S4_UP
else
echo_fatal "BAD INTERFACE NAME FOR SGW S1U $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP"' (waiting for ethx.y, wlanx.y or wifix.y)'
fi;
#
is_real_interface $PGW_INTERFACE_NAME_FOR_SGI
if [ $? -eq 1 ]; then
ping -c 1 router.eur > /dev/null || { echo_fatal "router.eur does not respond to ping" >&2 ; }
IP_ROUTER=`python -c 'import socket; print socket.gethostbyname("router.eur")'`
export MAC_ROUTER=`ip neigh show | grep $IP_ROUTER | cut -d ' ' -f5 | tr -d ':'`
echo_success "ROUTER MAC ADDRESS= $MAC_ROUTER"
# # get ipv4 address from PGW_INTERFACE_NAME_FOR_SGI
#IP_ADDR=`ifconfig $PGW_INTERFACE_NAME_FOR_SGI | awk '/inet addr/ {split ($2,A,":"); print A[2]}' | tr '\n' ' ' | sed -n '1h;1!H;${;g;s/^[ \t]*//g;s/[ \t]*$//g;p;}'`
#NETWORK=`echo $IP_ADDR | cut -d . -f 1,2,3`
bash_exec "modprobe 8021q"
for i in 5 6 7 8 9 10 11 12 13 14 15
do
# create vlan interface
ifconfig $PGW_INTERFACE_NAME_FOR_SGI.$i down > /dev/null 2>&1
vconfig rem $PGW_INTERFACE_NAME_FOR_SGI.$i > /dev/null 2>&1
sync
bash_exec "vconfig add $PGW_INTERFACE_NAME_FOR_SGI $i"
sync
bash_exec "ifconfig $PGW_INTERFACE_NAME_FOR_SGI.$i up"
sync
# configure vlan interface
#CIDR=$NETWORK'.'$i'/24'
base=200
NET=$(( $i + $base ))
CIDR='10.0.'$NET'.2/8'
bash_exec "ip -4 addr add $CIDR dev $PGW_INTERFACE_NAME_FOR_SGI.$i"
done
bash_exec "ip link set $PGW_INTERFACE_NAME_FOR_SGI promisc on"
else
echo_warning "SGI interface disabled by config file"
fi
}
clean_epc_vlan_network() {
bash_exec "modprobe tun"
bash_exec "modprobe ip_tables"
bash_exec "modprobe iptable_nat"
bash_exec "modprobe x_tables"
bash_exec "$IPTABLES -P INPUT ACCEPT"
bash_exec "$IPTABLES -F INPUT"
bash_exec "$IPTABLES -P OUTPUT ACCEPT"
bash_exec "$IPTABLES -F OUTPUT"
bash_exec "$IPTABLES -P FORWARD ACCEPT"
bash_exec "$IPTABLES -F FORWARD"
bash_exec "$IPTABLES -t raw -F"
bash_exec "$IPTABLES -t nat -F"
bash_exec "$IPTABLES -t mangle -F"
bash_exec "$IPTABLES -t filter -F"
bash_exec "ip route flush cache"
echo " Disabling forwarding"
bash_exec "sysctl -w net.ipv4.ip_forward=0"
assert " `sysctl -n net.ipv4.ip_forward` -eq 0" $LINENO
echo " Enabling DynamicAddr.."
bash_exec "sysctl -w net.ipv4.ip_dynaddr=1"
assert " `sysctl -n net.ipv4.ip_dynaddr` -eq 1" $LINENO
bash_exec "sysctl -w net.ipv4.conf.all.log_martians=1"
assert " `sysctl -n net.ipv4.conf.all.log_martians` -eq 1" $LINENO
echo " Disabling reverse path filtering"
bash_exec "sysctl -w net.ipv4.conf.all.rp_filter=0"
assert " `sysctl -n net.ipv4.conf.all.rp_filter` -eq 0" $LINENO
bash_exec "modprobe 8021q"
ifconfig $MME_INTERFACE_NAME_FOR_S1_MME down > /dev/null 2>&1
vconfig rem $MME_INTERFACE_NAME_FOR_S1_MME > /dev/null 2>&1
ifconfig $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP down > /dev/null 2>&1
vconfig rem $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP > /dev/null 2>&1
for i in 5 6 7 8 9 10 11 12 13 14 15
do
# delete vlan interface
ifconfig $PGW_INTERFACE_NAME_FOR_SGI.$i down > /dev/null 2>&1
vconfig rem $PGW_INTERFACE_NAME_FOR_SGI.$i > /dev/null 2>&1
done
#ip link set $PGW_INTERFACE_NAME_FOR_SGI down > /dev/null 2>&1
clean_network
}
build_tun_network() {
# REMINDER:
# hss.eur
# |
# +-----------+ +-----------+ v +----------+
# | eNB +------+ +------+ MME +----+ +---+ HSS |
# | |cpenb0+------------------+cpmme0| |s6am+------+s6a| |
# | +------+ +------+ +----+ +---+ |
# | |upenb0+-------+ | | +----------+
# | +------+ | +-+-------+-+
# | | | | s11mme|
# | | | +---+---+
# | | | (optional)|
# +-----------+ | +---+---+
# | | s11sgw| router.eur
# | +-+-------+-+ | +--------------+
# | | S+P-GW | v | ROUTER |
# | +------+ +-------+ +----+ +----+
# +----------+upsgw0| |sgi +-...-+ | | +---...Internet
# +------+ +-------+ +----+ +----+
# | | 11 VLANS | |
# +-----------+ ids=[5..15] +--------------+
#
bash_exec "modprobe tun"
##################################################
# build network between eNB and MME/SPGW and HSS
##################################################
echo_success "ENB_INTERFACE_NAME_FOR_S1_MME is "$ENB_INTERFACE_NAME_FOR_S1_MME" addr is "$ENB_IPV4_ADDRESS_FOR_S1_MME
echo_success "ENB_INTERFACE_NAME_FOR_S1U is "$ENB_INTERFACE_NAME_FOR_S1U" addr is "$ENB_IPV4_ADDRESS_FOR_S1U
echo_success "MME_INTERFACE_NAME_FOR_S1_MME is "$MME_INTERFACE_NAME_FOR_S1_MME" addr is "$MME_IPV4_ADDRESS_FOR_S1_MME
echo_success "SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP is "$SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP" addr is "$SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP
echo_success "MME_INTERFACE_NAME_FOR_S11_MME is "$MME_INTERFACE_NAME_FOR_S11_MME" addr is "$MME_IPV4_ADDRESS_FOR_S11_MME
echo_success "SGW_INTERFACE_NAME_FOR_S11 is "$SGW_INTERFACE_NAME_FOR_S11" addr is "$SGW_IPV4_ADDRESS_FOR_S11
echo_success "MME_INTERFACE_NAME_FOR_S6A is "$MME_INTERFACE_NAME_FOR_S6A" addr is "$MME_IPV4_ADDRESS_FOR_S6A
echo_success "HSS_INTERFACE_NAME_FOR_S6A is "$HSS_INTERFACE_NAME_FOR_S6A" addr is "$HSS_IPV4_ADDRESS_FOR_S6A
create_tun_interface $ENB_INTERFACE_NAME_FOR_S1_MME
create_tun_interface $ENB_INTERFACE_NAME_FOR_S1U
create_tun_interface $MME_INTERFACE_NAME_FOR_S1_MME
create_tun_interface $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP
create_tun_interface $MME_INTERFACE_NAME_FOR_S11_MME
create_tun_interface $SGW_INTERFACE_NAME_FOR_S11
create_tun_interface $MME_INTERFACE_NAME_FOR_S6A
create_tun_interface $HSS_INTERFACE_NAME_FOR_S6A
set_interface_up $MME_INTERFACE_NAME_FOR_S1_MME $MME_IPV4_ADDRESS_FOR_S1_MME $MME_IPV4_NETMASK_FOR_S1_MME
set_interface_up $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP $SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP $SGW_IPV4_NETMASK_FOR_S1U_S12_S4_UP
set_interface_up $ENB_INTERFACE_NAME_FOR_S1_MME $ENB_IPV4_ADDRESS_FOR_S1_MME $ENB_IPV4_NETMASK_FOR_S1_MME
set_interface_up $ENB_INTERFACE_NAME_FOR_S1U $ENB_IPV4_ADDRESS_FOR_S1U $ENB_IPV4_NETMASK_FOR_S1U
set_interface_up $MME_INTERFACE_NAME_FOR_S11_MME $MME_IPV4_ADDRESS_FOR_S11_MME $MME_IPV4_NETMASK_FOR_S11_MME
set_interface_up $SGW_INTERFACE_NAME_FOR_S11 $SGW_IPV4_ADDRESS_FOR_S11 $SGW_IPV4_NETMASK_FOR_S11
set_interface_up $MME_INTERFACE_NAME_FOR_S6A $MME_IPV4_ADDRESS_FOR_S6A $MME_IPV4_NETMASK_FOR_S6A
set_interface_up $HSS_INTERFACE_NAME_FOR_S6A $HSS_IPV4_ADDRESS_FOR_S6A $HSS_IPV4_NETMASK_FOR_S6A
}
# arg1 is IF1 IP addr
# arg2 is IF2 IP addr
test_local_iperf() {
TRY_NO=3
until [ $TRY_NO -lt 1 ]; do
iperf --bind $1 -u -s 2>&1 > /dev/null &
iperf --bind $2 -u --num 1K -c $1 2>&1 | grep -i WARNING > /dev/null
if [ $? -eq 0 ]; then
pkill iperf 2>&1 > /dev/null
echo_warning "NETWORK TEST FAILED between $1 and $2"
else
echo_success "NETWORK TEST SUCCESS between $1 and $2"
pkill iperf 2>&1 > /dev/null
return
fi
let TRY_NO-=1
pkill iperf 2>&1 > /dev/null
done
echo_fatal "FATAL: NETWORK TEST FAILED between $1 and $2"
}
test_tun_network() {
# TEST INTERFACES
ping -q -c 1 $MME_IPV4_ADDRESS_FOR_S1_MME > /dev/null 2>&1
if [ $? -ne 0 ]; then echo_fatal "PING INTERFACE $MME_INTERFACE_NAME_FOR_S1_MME ERROR, ADDRESS IS $MME_IPV4_ADDRESS_FOR_S1_MME"; fi;
ping -q -c 1 $SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP > /dev/null 2>&1
if [ $? -ne 0 ]; then echo_fatal "PING INTERFACE $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP ERROR, ADDRESS IS $SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP"; fi;
ping -q -c 1 $ENB_IPV4_ADDRESS_FOR_S1_MME > /dev/null 2>&1
if [ $? -ne 0 ]; then echo_fatal "PING INTERFACE $ENB_INTERFACE_NAME_FOR_S1_MME ADDR ERROR, ADDRESS IS $ENB_IPV4_ADDRESS_FOR_S1_MME"; fi;
ping -q -c 1 $ENB_IPV4_ADDRESS_FOR_S1U > /dev/null 2>&1
if [ $? -ne 0 ]; then echo_fatal "PING INTERFACE $ENB_INTERFACE_NAME_FOR_S1U ERROR, ADDRESS IS $ENB_IPV4_ADDRESS_FOR_S1U"; fi;
ping -q -c 1 $MME_IPV4_ADDRESS_FOR_S11_MME > /dev/null 2>&1
if [ $? -ne 0 ]; then echo_fatal "PING INTERFACE $MME_INTERFACE_NAME_FOR_S11_MME ERROR, ADDRESS IS $MME_IPV4_ADDRESS_FOR_S11_MME"; fi;
ping -q -c 1 $SGW_IPV4_ADDRESS_FOR_S11 > /dev/null 2>&1
if [ $? -ne 0 ]; then echo_fatal "PING INTERFACE $SGW_INTERFACE_NAME_FOR_S11 ERROR, ADDRESS IS $SGW_IPV4_ADDRESS_FOR_S11"; fi;
ping -q -c 1 $MME_IPV4_ADDRESS_FOR_S6A > /dev/null 2>&1
if [ $? -ne 0 ]; then echo_fatal "PING INTERFACE $MME_INTERFACE_NAME_FOR_S6A ERROR, ADDRESS IS $MME_IPV4_ADDRESS_FOR_S6A"; fi;
ping -q -c 1 $HSS_IPV4_ADDRESS_FOR_S6A > /dev/null 2>&1
if [ $? -ne 0 ]; then echo_fatal "PING INTERFACE $HSS_INTERFACE_NAME_FOR_S6A ERROR, ADDRESS IS $HSS_IPV4_ADDRESS_FOR_S6A"; fi;
## TEST NETWORK BETWEEN ENB-MME-SP-GW
test_local_iperf $ENB_IPV4_ADDRESS_FOR_S1_MME $MME_IPV4_ADDRESS_FOR_S1_MME
test_local_iperf $ENB_IPV4_ADDRESS_FOR_S1U $SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP
test_local_iperf $MME_IPV4_ADDRESS_FOR_S11_MME $SGW_IPV4_ADDRESS_FOR_S11
test_local_iperf $MME_IPV4_ADDRESS_FOR_S6A $HSS_IPV4_ADDRESS_FOR_S6A
# Get MAC address of router.eur
ping -c 1 hss.eur > /dev/null || { echo_fatal "hss.eur does not respond to ping" >&2 ; }
ping -c 1 router.eur > /dev/null || { echo_fatal "router.eur does not respond to ping" >&2 ; }
return 0
}
clean_tun_network() {
bash_exec "modprobe tun"
##################################################
# del interfaces eNB and MME/SPGW and HSS
##################################################
delete_tun_interface $ENB_INTERFACE_NAME_FOR_S1_MME
delete_tun_interface $ENB_INTERFACE_NAME_FOR_S1U
delete_tun_interface $MME_INTERFACE_NAME_FOR_S1_MME
delete_tun_interface $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP
delete_tun_interface $MME_INTERFACE_NAME_FOR_S11_MME
delete_tun_interface $SGW_INTERFACE_NAME_FOR_S11
delete_tun_interface $MME_INTERFACE_NAME_FOR_S6A
delete_tun_interface $HSS_INTERFACE_NAME_FOR_S6A
}
build_epc_tun_network() {
build_tun_network
ping -c 1 router.eur > /dev/null || { echo_fatal "router.eur does not respond to ping" >&2 ; }
IP_ROUTER=`python -c 'import socket; print socket.gethostbyname("router.eur")'`
export MAC_ROUTER=`ip neigh show | grep $IP_ROUTER | cut -d ' ' -f5 | tr -d ':'`
echo_success "ROUTER MAC ADDRESS= $MAC_ROUTER"
bash_exec "modprobe 8021q"
for i in 5 6 7 8 9 10 11 12 13 14 15
do
# create vlan interface
ifconfig $PGW_INTERFACE_NAME_FOR_SGI.$i down > /dev/null 2>&1
vconfig rem $PGW_INTERFACE_NAME_FOR_SGI.$i > /dev/null 2>&1
sync
bash_exec "vconfig add $PGW_INTERFACE_NAME_FOR_SGI $i"
sync
bash_exec "ifconfig $PGW_INTERFACE_NAME_FOR_SGI.$i up"
sync
# configure vlan interface
#CIDR=$NETWORK'.'$i'/24'
base=200
NET=$(( $i + $base ))
CIDR='10.0.'$NET'.2/8'
bash_exec "ip -4 addr add $CIDR dev $PGW_INTERFACE_NAME_FOR_SGI.$i"
done
bash_exec "ip link set $PGW_INTERFACE_NAME_FOR_SGI promisc on"
}
clean_epc_ovs_network() {
bash_exec "modprobe tun"
bash_exec "modprobe ip_tables"
bash_exec "modprobe iptable_nat"
bash_exec "modprobe x_tables"
bash_exec "$IPTABLES -P INPUT ACCEPT"
bash_exec "$IPTABLES -F INPUT"
bash_exec "$IPTABLES -P OUTPUT ACCEPT"
bash_exec "$IPTABLES -F OUTPUT"
bash_exec "$IPTABLES -P FORWARD ACCEPT"
bash_exec "$IPTABLES -F FORWARD"
bash_exec "$IPTABLES -t raw -F"
bash_exec "$IPTABLES -t nat -F"
bash_exec "$IPTABLES -t mangle -F"
bash_exec "$IPTABLES -t filter -F"
bash_exec "ip route flush cache"
echo " Disabling forwarding"
bash_exec "sysctl -w net.ipv4.ip_forward=0"
assert " `sysctl -n net.ipv4.ip_forward` -eq 0" $LINENO
echo " Enabling DynamicAddr.."
bash_exec "sysctl -w net.ipv4.ip_dynaddr=1"
assert " `sysctl -n net.ipv4.ip_dynaddr` -eq 1" $LINENO
bash_exec "sysctl -w net.ipv4.conf.all.log_martians=1"
assert " `sysctl -n net.ipv4.conf.all.log_martians` -eq 1" $LINENO
echo " Disabling reverse path filtering"
bash_exec "sysctl -w net.ipv4.conf.all.rp_filter=0"
assert " `sysctl -n net.ipv4.conf.all.rp_filter` -eq 0" $LINENO
for i in 5 6 7 8 9 10 11 12 13 14 15
do
ifconfig $PGW_INTERFACE_NAME_FOR_SGI.$i down > /dev/null 2>&1
vconfig rem $PGW_INTERFACE_NAME_FOR_SGI.$i > /dev/null 2>&1
done
clean_network
clean_tun_network
}
clean_network() {
interfaces=`ifconfig | grep HWaddr | cut -d " " -f1-2 | tr -d '\n'`
for interface in $interfaces
do
is_vlan_interface $interface
if [ $? -eq 1 ]; then
echo_success "Found VLAN interface $interface ... deleting"
ifconfig $interface down > /dev/null 2>&1
vconfig rem $interface > /dev/null 2>&1
fi
done
}
check_s6a_certificate() {
if [ -d /usr/local/etc/freeDiameter ]
then
if [ -f /usr/local/etc/freeDiameter/user.cert.pem ]
then
full_hostname=`cat /usr/local/etc/freeDiameter/user.cert.pem | grep "Subject" | grep "CN" | cut -d '=' -f6`
if [ a$full_hostname == a`hostname`.eur ]
then
echo_success "S6A: Found valid certificate in /usr/local/etc/freeDiameter"
return 1
fi
fi
fi
echo_error "S6A: Did not find valid certificate in /usr/local/etc/freeDiameter"
echo_warning "S6A: generatting new certificate in /usr/local/etc/freeDiameter..."
cd $OPENAIRCN_DIR/S6A/freediameter
./make_certs.sh
check_s6a_certificate
return 1
}
check_install_epc_software() {
test_install_package autoconf
test_install_package automake
test_install_package bison
test_install_package build-essential
test_install_package cmake
test_install_package cmake-curses-gui
test_install_package ethtool
test_install_package flex
test_install_package g++
test_install_package gawk
test_install_package gcc
test_install_package gccxml
test_install_package gdb
test_install_package guile-2.0-dev
test_install_package iperf
test_install_package iproute
test_install_package iptables
test_install_package libatlas-base-dev
test_install_package libatlas-dev
test_install_package libblas
test_install_package libblas-dev
test_install_package libconfig-dev
test_install_package libforms-bin
test_install_package libforms-dev
test_install_package libgcrypt11-dev
test_install_package libgmp-dev
test_install_package libgtk-3-dev
test_install_package libidn11-dev
test_install_package libidn2-0-dev
test_install_package libmysqlclient-dev
test_install_package libpgm-dev
test_install_package libpthread-stubs0-dev
test_install_package libsctp1
test_install_package libsctp1
test_install_package libsctp-dev
test_install_package libsctp-dev
test_install_package libtasn1-3-dev
test_install_package libxml2
test_install_package libxml2-dev
test_install_package libxml2-dev
test_install_package linux-headers-`uname -r`
test_install_package make
test_install_package openssl
test_install_package openvpn
test_install_package python-dev
test_install_package subversion
test_install_package swig
test_install_package tshark
test_install_package uml-utilities
test_install_package unzip
test_install_package valgrind
test_install_package vlan
if [ ! -d /usr/local/etc/freeDiameter ]
then
# This script make certificates also
cd $OPENAIRCN_DIR/S6A/freediameter && ./install_freediameter.sh
else
echo_success "freediameter is installed"
check_s6a_certificate
fi
test_command_install_script "asn1c" "$OPENAIRCN_DIR/SCRIPTS/install_asn1c_0.9.24.modified.bash"
# One mor check about version of asn1c
ASN1C_COMPILER_REQUIRED_VERSION_MESSAGE="ASN.1 Compiler, v0.9.24"
ASN1C_COMPILER_VERSION_MESSAGE=`asn1c -h 2>&1 | grep -i ASN\.1\ Compiler`
##ASN1C_COMPILER_VERSION_MESSAGE=`trim $ASN1C_COMPILER_VERSION_MESSAGE`
if [ "$ASN1C_COMPILER_VERSION_MESSAGE" != "$ASN1C_COMPILER_REQUIRED_VERSION_MESSAGE" ]
then
diff <(echo -n "$ASN1C_COMPILER_VERSION_MESSAGE") <(echo -n "$ASN1C_COMPILER_REQUIRED_VERSION_MESSAGE")
echo_error "Version of asn1c is not the required one, do you want to install the required one (overwrite installation) ? (Y/n)"
echo_error "$ASN1C_COMPILER_VERSION_MESSAGE"
while read -r -n 1 -s answer; do
if [[ $answer = [YyNn] ]]; then
[[ $answer = [Yy] ]] && $OPENAIRCN_DIR/SCRIPTS/install_asn1c_0.9.24.modified.bash
[[ $answer = [Nn] ]] && echo_error "Version of asn1c is not the required one, exiting." && exit 1
break
fi
done
fi
}
compile_epc() {
cd $OPENAIRCN_DIR
OBJ_DIR=`find . -maxdepth 1 -type d -iname obj*`
if [ ! -n "$OBJ_DIR" ]
then
OBJ_DIR="objs"
bash_exec "mkdir -m 777 ./$OBJ_DIR"
echo_success "Created $OBJ_DIR directory"
else
OBJ_DIR=`basename $OBJ_DIR`
fi
if [ ! -f $OBJ_DIR/Makefile ]
then
if [ ! -n "m4" ]
then
mkdir -m 777 m4
fi
echo_success "Invoking autogen"
bash_exec "./autogen.sh"
cd ./$OBJ_DIR
echo_success "Invoking configure"
../configure --enable-standalone-epc --enable-raw-socket-for-sgi LDFLAGS=-L/usr/local/lib
else
cd ./$OBJ_DIR
fi
pkill oai_epc
pkill tshark
if [ -f Makefile ]
then
echo_success "Compiling..."
make -j `cat /proc/cpuinfo | grep processor | wc -l`
if [ $? -ne 0 ]; then
echo_error "Build failed, exiting"
exit 1
fi
else
echo_error "Configure failed, exiting"
exit 1
fi
}
###########################################################
IPTABLES=/sbin/iptables
THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
declare -x OPENAIR_DIR=""
declare -x OPENAIR1_DIR=""
declare -x OPENAIR2_DIR=""
declare -x OPENAIR3_DIR=""
declare -x OPENAIRCN_DIR=""
declare -x OPENAIR_TARGETS=""
###########################################################
set_openair
cecho "OPENAIR_DIR = $OPENAIR_DIR" $green
cecho "OPENAIR_HOME = $OPENAIR_HOME" $green
cecho "OPENAIR1_DIR = $OPENAIR1_DIR" $green
cecho "OPENAIR2_DIR = $OPENAIR2_DIR" $green
cecho "OPENAIR3_DIR = $OPENAIR3_DIR" $green
cecho "OPENAIRCN_DIR = $OPENAIRCN_DIR" $green
cecho "OPENAIR_TARGETS = $OPENAIR_TARGETS" $green
Reference in New Issue View Git Blame Copy Permalink