maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
465d7de5a9601aad5f7452bc5d255e72efbf23a7
openairinterface5g/openair1/SIMULATION/NR_PHY/pbchsim.c
T
Robert Schmidt 465d7de5a9 Remove --usim-test command line option 
Remove the --usim-test option: to my knowledge, it's not used by users,
and is misleadingly placed in various places where there should not be a
difference w.r.t. USIM configuration.

When making the changes, I assumed that --usim-test would be 0 (the
default), which is the case in all executables when not specified in
options except for the nr_dlsim, nr_pbchsmi, nr_ulsim simulators.

The only exception is the initialization of PDCP from the MAC, which is
not correct (the PDCP is in the CU, so it does not make sense to call it
from the MAC which is in the DU). Instead, always initialize from main,
even in the NSA case (NSA was covered by the incorrect initialization
from MAC).

This in turn let to some more cleanup around function du_rlc_data_req().
After receiving GTP packets at the DU, they were given to the PDCP to
enqueue the packet at RLC. This does not work anymore, since the PDCP is
not initialized; it also does not seem necessary, as this enqueue
functionality is necessary to decouple PDCP and RLC to avoid deadlocks
in monolithic, but in split-mode, this cannot happen. Instead, call
directly into the RLC when receiving GTP packets.
2025-07-23 12:12:59 +02:00

823 lines
26 KiB
C
Raw Blame History

/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
#include <string.h>
#include <math.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include "common/config/config_userapi.h"
#include "common/utils/LOG/log.h"
#include "common/utils/load_module_shlib.h"
#include "common/ran_context.h"
#include "common/utils/nr/nr_common.h"
#include "PHY/types.h"
#include "PHY/defs_nr_common.h"
#include "PHY/defs_nr_UE.h"
#include "PHY/defs_gNB.h"
#include "PHY/NR_REFSIG/refsig_defs_ue.h"
#include "PHY/MODULATION/modulation_eNB.h"
#include "PHY/MODULATION/modulation_UE.h"
#include "PHY/MODULATION/nr_modulation.h"
#include "PHY/INIT/nr_phy_init.h"
#include "PHY/NR_TRANSPORT/nr_transport_proto.h"
#include "PHY/NR_UE_TRANSPORT/nr_transport_proto_ue.h"
#include "PHY/NR_UE_ESTIMATION/nr_estimation.h"
#include "PHY/phy_vars.h"
#include "SCHED_NR/sched_nr.h"
#include "openair1/SIMULATION/TOOLS/sim.h"
#include "openair1/SIMULATION/RF/rf.h"
#include "openair1/SIMULATION/NR_PHY/nr_unitary_defs.h"
#include "openair1/PHY/MODULATION/nr_modulation.h"
#include <executables/softmodem-common.h>
#include <executables/nr-uesoftmodem.h>
#include "nfapi/oai_integration/vendor_ext.h"
//#define DEBUG_NR_PBCHSIM
PHY_VARS_gNB *gNB;
PHY_VARS_NR_UE *UE;
RAN_CONTEXT_t RC;
int32_t uplink_frequency_offset[MAX_NUM_CCs][4];
double cpuf;
// needed for some functions
openair0_config_t openair0_cfg[MAX_CARDS];
uint8_t const nr_rv_round_map[4] = {0, 2, 3, 1};
void inc_ref_sched_response(int _)
{
LOG_E(PHY, "fatal\n");
exit(1);
}
void deref_sched_response(int _)
{
LOG_E(PHY, "fatal\n");
exit(1);
}
static softmodem_params_t softmodem_params;
softmodem_params_t *get_softmodem_params(void) {
return &softmodem_params;
}
nrUE_params_t nrUE_params={0};
nrUE_params_t *get_nrUE_params(void) {
return &nrUE_params;
}
void init_downlink_harq_status(NR_DL_UE_HARQ_t *dl_harq) {}
NR_IF_Module_t *NR_IF_Module_init(int Mod_id) { return (NULL); }
nfapi_mode_t nfapi_getmode(void) { return NFAPI_MODE_UNKNOWN; }
void nr_fill_dl_indication(nr_downlink_indication_t *dl_ind,
fapi_nr_dci_indication_t *dci_ind,
fapi_nr_rx_indication_t *rx_ind,
const UE_nr_rxtx_proc_t *proc,
PHY_VARS_NR_UE *ue,
void *phy_data)
{
}
void nr_fill_rx_indication(fapi_nr_rx_indication_t *rx_ind,
uint8_t pdu_type,
PHY_VARS_NR_UE *ue,
NR_UE_DLSCH_t *dlsch0,
NR_UE_DLSCH_t *dlsch1,
uint16_t n_pdus,
const UE_nr_rxtx_proc_t *proc,
void *typeSpecific,
uint8_t *b)
{
}
int nr_ue_pdcch_procedures(PHY_VARS_NR_UE *ue,
const UE_nr_rxtx_proc_t *proc,
int32_t pdcch_est_size,
c16_t pdcch_dl_ch_estimates[][pdcch_est_size],
nr_phy_data_t *phy_data,
int n_ss,
c16_t rxdataF[][ue->frame_parms.samples_per_slot_wCP])
{
return 0;
}
configmodule_interface_t *uniqCfg = NULL;
int main(int argc, char **argv)
{
stop = false;
__attribute__((unused)) struct sigaction oldaction;
sigaction(SIGINT, &sigint_action, &oldaction);
int i,aa,start_symbol;
double sigma2, sigma2_dB=10,SNR,snr0=-2.0,snr1=2.0;
double cfo=0;
uint8_t snr1set=0;
c16_t **txdata;
double **s_re,**s_im,**r_re,**r_im;
//double iqim = 0.0;
double ip =0.0;
//unsigned char pbch_pdu[6];
// int sync_pos, sync_pos_slot;
// FILE *rx_frame_file;
FILE *output_fd = NULL;
//uint8_t write_output_file=0;
//int result;
//int freq_offset;
// int subframe_offset;
// char fname[40], vname[40];
int trial,n_trials=1,n_errors=0,n_errors_payload=0;
int ret_test = 1;
uint8_t transmission_mode = 1,n_tx=1,n_rx=1;
uint16_t Nid_cell=0;
uint64_t SSB_positions=0x01;
int ssb_subcarrier_offset = 0;
int ssb_scan_threads = 0;
channel_desc_t *gNB2UE;
//uint8_t extended_prefix_flag=0;
//int8_t interf1=-21,interf2=-21;
FILE *input_fd=NULL,*pbch_file_fd=NULL;
//uint32_t nsymb,tx_lev,tx_lev1 = 0,tx_lev2 = 0;
//char input_val_str[50],input_val_str2[50];
//uint8_t frame_mod4,num_pdcch_symbols = 0;
//double pbch_sinr;
//int pbch_tx_ant;
SCM_t channel_model=AWGN;//Rayleigh1_anticorr;
int N_RB_DL=273,mu=1;
//unsigned char frame_type = 0;
unsigned char pbch_phase = 0;
int frame=0;
int frame_length_complex_samples;
__attribute__((unused))
int frame_length_complex_samples_no_prefix;
NR_DL_FRAME_PARMS *frame_parms;
int ret;
int run_initial_sync=0;
int loglvl=OAILOG_WARNING;
float target_error_rate = 0.01;
int seed = 0;
cpuf = get_cpu_freq_GHz();
if ((uniqCfg = load_configmodule(argc, argv, CONFIG_ENABLECMDLINEONLY)) == 0) {
exit_fun("[NR_PBCHSIM] Error, configuration module init failed\n");
}
int c;
while ((c = getopt (argc, argv, "--:O:c:F:g:hIL:m:M:n:N:o:P:r:R:s:S:x:y:z:")) != -1) {
/* ignore long options starting with '--', option '-O' and their arguments that are handled by configmodule */
/* with this opstring getopt returns 1 for non-option arguments, refer to 'man 3 getopt' */
if (c == 1 || c == '-' || c == 'O')
continue;
printf("handling optarg %c\n",c);
switch (c) {
case 'c':
ssb_subcarrier_offset = atoi(optarg);
break;
/*case 'f':
write_output_file=1;
output_fd = fopen(optarg,"w");
if (output_fd==NULL) {
printf("Error opening %s\n",optarg);
exit(-1);
}
break;*/
/*case 'd':
frame_type = 1;
break;*/
case 'F':
input_fd = fopen(optarg,"r");
if (input_fd==NULL) {
printf("Problem with filename %s. Exiting.\n", optarg);
exit(-1);
}
break;
case 'g':
switch((char)*optarg) {
case 'A':
channel_model=SCM_A;
break;
case 'B':
channel_model=SCM_B;
break;
case 'C':
channel_model=SCM_C;
break;
case 'D':
channel_model=SCM_D;
break;
case 'E':
channel_model=EPA;
break;
case 'F':
channel_model=EVA;
break;
case 'G':
channel_model=ETU;
break;
default:
printf("Unsupported channel model! Exiting.\n");
exit(-1);
}
break;
/*
case 'i':
interf1=atoi(optarg);
break;
*/
case 'I':
run_initial_sync=1;
target_error_rate=0.1;
break;
/*
case 'j':
interf2=atoi(optarg);
break;*/
case 'L':
loglvl = atoi(optarg);
break;
case 'm':
mu = atoi(optarg);
break;
case 'M':
SSB_positions = atoi(optarg);
break;
case 'n':
n_trials = atoi(optarg);
break;
case 'N':
Nid_cell = atoi(optarg);
break;
case 'o':
cfo = atof(optarg);
#ifdef DEBUG_NR_PBCHSIM
printf("Setting CFO to %f Hz\n",cfo);
#endif
break;
/*case 'p':
extended_prefix_flag=1;
break;*/
case 'P':
pbch_phase = atoi(optarg);
if (pbch_phase>3)
printf("Illegal PBCH phase (0-3) got %d\n",pbch_phase);
break;
/*
case 'r':
ricean_factor = pow(10,-.1*atof(optarg));
if (ricean_factor>1) {
printf("Ricean factor must be between 0 and 1\n");
exit(-1);
}
break;
*/
case 'r':
seed = atoi(optarg);
break;
case 'R':
N_RB_DL = atoi(optarg);
break;
case 's':
snr0 = atof(optarg);
#ifdef DEBUG_NR_PBCHSIM
printf("Setting SNR0 to %f\n",snr0);
#endif
break;
case 'S':
snr1 = atof(optarg);
snr1set=1;
#ifdef DEBUG_NR_PBCHSIM
printf("Setting SNR1 to %f\n",snr1);
#endif
break;
/*
case 't':
Td= atof(optarg);
break;
*/
case 'x':
transmission_mode=atoi(optarg);
if ((transmission_mode!=1) && (transmission_mode!=2) && (transmission_mode!=6)) {
printf("Unsupported transmission mode %d. Exiting.\n",transmission_mode);
exit(-1);
}
break;
case 'y':
n_tx=atoi(optarg);
if ((n_tx==0) || (n_tx>2)) {
printf("Unsupported number of TX antennas %d. Exiting.\n", n_tx);
exit(-1);
}
break;
case 'z':
n_rx=atoi(optarg);
if ((n_rx==0) || (n_rx>2)) {
printf("Unsupported number of RX antennas %d. Exiting.\n", n_rx);
exit(-1);
}
break;
default:
case 'h':
printf("%s -F input_filename -g channel_mod -h(elp) -I(nitial sync) -L log_lvl -n n_frames -M SSBs -n frames -N cell_id -o FO -P phase -r seed -R RBs -s snr0 -S snr1 -x transmission_mode -y TXant -z RXant\n",
argv[0]);
//printf("-A Interpolation_filname Run with Abstraction to generate Scatter plot using interpolation polynomial in file\n");
printf("-c SSB subcarrier offset\n");
//printf("-C Generate Calibration information for Abstraction (effective SNR adjustment to remove Pe bias w.r.t. AWGN)\n");
//printf("-d Use TDD\n");
//printf("-f Output filename (.txt format) for Pe/SNR results\n");
printf("-F Input filename (.txt format) for RX conformance testing\n");
printf("-g [A,B,C,D,E,F,G] Use 3GPP SCM (A,B,C,D) or 36-101 (E-EPA,F-EVA,G-ETU) models (ignores delay spread and Ricean factor)\n");
printf("-h This message\n");
//printf("-i Relative strength of first intefering eNB (in dB) - cell_id mod 3 = 1\n");
printf("-I run initial sync with target error rate 0.1\n");
//printf("-j Relative strength of second intefering eNB (in dB) - cell_id mod 3 = 2\n");
printf("-L set the log level (-1 disable, 0 error, 1 warning, 2 info, 3 debug, 4 trace)\n");
printf("-m Numerology index\n");
printf("-M Multiple SSB positions in burst\n");
printf("-n Number of frames to simulate\n");
printf("-N Nid_cell\n");
printf("-o Carrier frequency offset in Hz\n");
//printf("-O oversampling factor (1,2,4,8,16)\n");
//printf("-p Use extended prefix mode\n");
printf("-P PBCH phase, allowed values 0-3\n");
printf("-r set the random number generator seed (default: 0 = current time)\n");
printf("-R N_RB_DL\n");
printf("-s Starting SNR, runs from SNR0 to SNR0 + 10 dB if not -S given. If -n 1, then just SNR is simulated\n");
printf("-S Ending SNR, runs from SNR0 to SNR1\n");
//printf("-t Delay spread for multipath channel\n");
printf("-x Transmission mode (1,2,6 for the moment)\n");
printf("-y Number of TX antennas used in eNB\n");
printf("-z Number of RX antennas used in UE\n");
exit (-1);
break;
}
}
randominit(seed);
logInit();
set_glog(loglvl);
if (snr1set==0)
snr1 = snr0+10;
printf("Initializing gNodeB for mu %d, N_RB_DL %d\n",mu,N_RB_DL);
RC.gNB = (PHY_VARS_gNB**) malloc(sizeof(PHY_VARS_gNB *));
RC.gNB[0] = malloc16_clear(sizeof(*(RC.gNB[0])));
gNB = RC.gNB[0];
gNB->ofdm_offset_divisor = UINT_MAX;
frame_parms = &gNB->frame_parms; //to be initialized I suppose (maybe not necessary for PBCH)
frame_parms->nb_antennas_tx = n_tx;
frame_parms->nb_antennas_rx = n_rx;
frame_parms->nb_antenna_ports_gNB = n_tx;
frame_parms->N_RB_DL = N_RB_DL;
frame_parms->Nid_cell = Nid_cell;
frame_parms->ssb_type = nr_ssb_type_C;
frame_parms->freq_range = mu<2 ? FR1 : FR2;
nr_phy_config_request_sim(gNB, N_RB_DL, N_RB_DL, mu, Nid_cell, SSB_positions);
// TDD configuration
gNB->gNB_config.tdd_table.tdd_period.value = 6;
do_tdd_config_sim(gNB, mu);
phy_init_nr_gNB(gNB);
frame_parms->ssb_start_subcarrier = 12 * gNB->gNB_config.ssb_table.ssb_offset_point_a.value + ssb_subcarrier_offset;
initFloatingCoresTpool(ssb_scan_threads, &nrUE_params.Tpool, false, "UE-tpool");
int n_hf = 0;
int cyclic_prefix_type = NFAPI_CP_NORMAL;
double fs=0, eps;
double scs = 30000;
double txbw, rxbw;
uint32_t samples;
get_samplerate_and_bw(mu, N_RB_DL, frame_parms->threequarter_fs, &fs, &samples, &txbw, &rxbw);
// cfo with respect to sub-carrier spacing
eps = cfo/scs;
// computation of integer and fractional FO to compare with estimation results
int IFO;
if(eps!=0.0){
printf("Introducing a CFO of %lf relative to SCS of %d kHz\n",eps,(int)(scs/1000));
if (eps>0)
IFO=(int)(eps+0.5);
else
IFO=(int)(eps-0.5);
printf("FFO = %lf; IFO = %d\n",eps-IFO,IFO);
}
gNB2UE = new_channel_desc_scm(n_tx, n_rx, channel_model, fs, 0, txbw, 300e-9, 0.0, CORR_LEVEL_LOW, 0, 0, 0, 0);
if (gNB2UE==NULL) {
printf("Problem generating channel model. Exiting.\n");
exit(-1);
}
frame_length_complex_samples = frame_parms->samples_per_subframe*NR_NUMBER_OF_SUBFRAMES_PER_FRAME;
frame_length_complex_samples_no_prefix = frame_parms->samples_per_subframe_wCP;
s_re = malloc(2*sizeof(double*));
s_im = malloc(2*sizeof(double*));
r_re = malloc(2*sizeof(double*));
r_im = malloc(2*sizeof(double*));
txdata = calloc(2, sizeof(c16_t*));
for (i=0; i<2; i++) {
s_re[i] = malloc16_clear(frame_length_complex_samples*sizeof(double));
s_im[i] = malloc16_clear(frame_length_complex_samples*sizeof(double));
r_re[i] = malloc16_clear(frame_length_complex_samples*sizeof(double));
r_im[i] = malloc16_clear(frame_length_complex_samples*sizeof(double));
printf("Allocating %d samples for txdata\n",frame_length_complex_samples);
txdata[i] = malloc16_clear(frame_length_complex_samples * sizeof(c16_t));
}
if (pbch_file_fd!=NULL) {
load_pbch_desc(pbch_file_fd);
}
//configure UE
UE = malloc16_clear(sizeof(*UE));
memcpy(&UE->frame_parms,frame_parms,sizeof(UE->frame_parms));
//phy_init_nr_top(UE); //called from init_nr_ue_signal
if (run_initial_sync==1) UE->is_synchronized = 0;
else UE->is_synchronized = 1;
if(eps!=0.0)
UE->UE_fo_compensation = 1; // if a frequency offset is set then perform fo estimation and compensation
if (init_nr_ue_signal(UE, 1) != 0) {
printf("Error at UE NR initialisation\n");
exit(-1);
}
processingData_L1tx_t msgDataTx;
// generate signal
const uint32_t rxdataF_sz = UE->frame_parms.samples_per_slot_wCP;
__attribute__ ((aligned(32))) c16_t rxdataF[UE->frame_parms.nb_antennas_rx][rxdataF_sz];
if (input_fd==NULL) {
for (i=0; i<frame_parms->Lmax; i++) {
if((SSB_positions >> i) & 0x01) {
const int sc_offset = frame_parms->freq_range == FR1 ? ssb_subcarrier_offset<<mu : ssb_subcarrier_offset;
const int prb_offset = frame_parms->freq_range == FR1 ? gNB->gNB_config.ssb_table.ssb_offset_point_a.value<<mu : gNB->gNB_config.ssb_table.ssb_offset_point_a.value << (mu - 2);
msgDataTx.ssb[i].ssb_pdu.ssb_pdu_rel15.bchPayload = 0x55dd33;
msgDataTx.ssb[i].ssb_pdu.ssb_pdu_rel15.SsbBlockIndex = i;
msgDataTx.ssb[i].ssb_pdu.ssb_pdu_rel15.SsbSubcarrierOffset = sc_offset;
msgDataTx.ssb[i].ssb_pdu.ssb_pdu_rel15.ssbOffsetPointA = prb_offset;
start_symbol = nr_get_ssb_start_symbol(frame_parms,i);
int slot = start_symbol/14;
for (aa=0; aa<gNB->frame_parms.nb_antennas_tx; aa++)
memset(gNB->common_vars.txdataF[0][aa], 0, frame_parms->samples_per_slot_wCP * sizeof(int32_t));
nr_common_signal_procedures (gNB,frame,slot,msgDataTx.ssb[i].ssb_pdu);
int samp = frame_parms->get_samples_slot_timestamp(slot, frame_parms, 0);
for (aa=0; aa<gNB->frame_parms.nb_antennas_tx; aa++) {
if (cyclic_prefix_type == 1) {
apply_nr_rotation_TX(frame_parms,
gNB->common_vars.txdataF[0][aa],
frame_parms->symbol_rotation[0],
slot,
frame_parms->N_RB_DL,
0,
12);
PHY_ofdm_mod((int *)gNB->common_vars.txdataF[0][aa],
(int *)&txdata[aa][samp],
frame_parms->ofdm_symbol_size,
12,
frame_parms->nb_prefix_samples,
CYCLIC_PREFIX);
} else {
apply_nr_rotation_TX(frame_parms,
gNB->common_vars.txdataF[0][aa],
frame_parms->symbol_rotation[0],
slot,
frame_parms->N_RB_DL,
0,
14);
PHY_ofdm_mod((int *)gNB->common_vars.txdataF[0][aa],
(int*)&txdata[aa][samp],
frame_parms->ofdm_symbol_size,
1,
frame_parms->nb_prefix_samples0,
CYCLIC_PREFIX);
PHY_ofdm_mod((int *)&gNB->common_vars.txdataF[0][aa][frame_parms->ofdm_symbol_size],
(int*)&txdata[aa][samp + frame_parms->nb_prefix_samples0 + frame_parms->ofdm_symbol_size],
frame_parms->ofdm_symbol_size,
13,
frame_parms->nb_prefix_samples,
CYCLIC_PREFIX);
}
}
}
}
LOG_M("txsigF0.m","txsF0", gNB->common_vars.txdataF[0][0],frame_length_complex_samples_no_prefix, 1, 1);
if (gNB->frame_parms.nb_antennas_tx>1)
LOG_M("txsigF1.m","txsF1", gNB->common_vars.txdataF[0][1],frame_length_complex_samples_no_prefix, 1, 1);
} else {
printf("Reading %d samples from file to antenna buffer %d\n",frame_length_complex_samples,0);
UE->UE_fo_compensation = 1; // perform fo compensation when samples from file are used
if (fread(txdata[0],
sizeof(int32_t),
frame_length_complex_samples,
input_fd) != frame_length_complex_samples) {
printf("error reading from file\n");
//exit(-1);
}
}
LOG_M("txsig0.m","txs0", txdata[0],frame_length_complex_samples,1,1);
if (gNB->frame_parms.nb_antennas_tx>1)
LOG_M("txsig1.m","txs1", txdata[1],frame_length_complex_samples,1,1);
if (output_fd)
fwrite(txdata[0],sizeof(int32_t),frame_length_complex_samples,output_fd);
/*int txlev = signal_energy(&txdata[0][5*frame_parms->ofdm_symbol_size + 4*frame_parms->nb_prefix_samples + frame_parms->nb_prefix_samples0],
frame_parms->ofdm_symbol_size + frame_parms->nb_prefix_samples);
printf("txlev %d (%f)\n",txlev,10*log10(txlev));*/
for (SNR = snr0; SNR < snr1 && !stop; SNR+=.2) {
n_errors = 0;
n_errors_payload = 0;
for (trial = 0; trial < n_trials && !stop; trial++) {
for (i=0; i<frame_length_complex_samples; i++) {
for (aa=0; aa<frame_parms->nb_antennas_tx; aa++) {
r_re[aa][i] = (double)txdata[aa][i].r;
r_im[aa][i] = (double)txdata[aa][i].i;
}
}
// multipath channel
//multipath_channel(gNB2UE,s_re,s_im,r_re,r_im,frame_length_complex_samples,0);
//AWGN
sigma2_dB = 20*log10((double)AMP/4)-SNR;
sigma2 = pow(10,sigma2_dB/10);
//printf("sigma2 %f (%f dB), tx_lev %f (%f dB)\n",sigma2,sigma2_dB,txlev,10*log10((double)txlev));
if(eps!=0.0)
rf_rx(r_re, // real part of txdata
r_im, // imag part of txdata
NULL, // interference real part
NULL, // interference imag part
0, // interference power
frame_parms->nb_antennas_rx, // number of rx antennas
frame_length_complex_samples, // number of samples in frame
1.0e9/fs, //sampling time (ns)
cfo, // frequency offset in Hz
0.0, // drift (not implemented)
0.0, // noise figure (not implemented)
0.0, // rx gain in dB ?
200, // 3rd order non-linearity in dB ?
&ip, // initial phase
30.0e3, // phase noise cutoff in kHz
-500.0, // phase noise amplitude in dBc
0.0, // IQ imbalance (dB),
0.0); // IQ phase imbalance (rad)
for (i=0; i<frame_length_complex_samples; i++) {
for (aa=0; aa<frame_parms->nb_antennas_rx; aa++) {
UE->common_vars.rxdata[aa][i].r = (short)(r_re[aa][i] + sqrt(sigma2 / 2) * gaussdouble(0.0, 1.0));
UE->common_vars.rxdata[aa][i].i = (short)(r_im[aa][i] + sqrt(sigma2 / 2) * gaussdouble(0.0, 1.0));
}
}
if (n_trials==1) {
LOG_M("rxsig0.m", "rxs0", UE->common_vars.rxdata[0], frame_parms->samples_per_frame, 1, 1);
if (gNB->frame_parms.nb_antennas_tx > 1)
LOG_M("rxsig1.m", "rxs1", UE->common_vars.rxdata[1], frame_parms->samples_per_frame, 1, 1);
}
if (UE->is_synchronized == 0) {
UE_nr_rxtx_proc_t proc = {0};
nr_gscn_info_t gscnInfo[MAX_GSCN_BAND] = {0};
const int numGscn = 1;
gscnInfo[0].ssbFirstSC = frame_parms->ssb_start_subcarrier;
nr_initial_sync_t ret = nr_initial_sync(&proc, UE, 1, 0, gscnInfo, numGscn);
printf("nr_initial_sync1 returns %s\n", ret.cell_detected ? "cell detected" : "cell not detected");
if (!ret.cell_detected)
n_errors++;
}
else {
UE_nr_rxtx_proc_t proc={0};
uint8_t ssb_index = 0;
const int estimateSz = frame_parms->symbols_per_slot * frame_parms->ofdm_symbol_size;
__attribute__((aligned(32))) struct complex16 dl_ch_estimates[frame_parms->nb_antennas_rx][estimateSz];
__attribute__((
aligned(32))) struct complex16 dl_ch_estimates_time[frame_parms->nb_antennas_rx][frame_parms->ofdm_symbol_size];
while (!((SSB_positions >> ssb_index) & 0x01))
ssb_index++; // to select the first transmitted ssb
UE->symbol_offset = nr_get_ssb_start_symbol(frame_parms, ssb_index);
int ssb_slot = (UE->symbol_offset/14)+(n_hf*(frame_parms->slots_per_frame>>1));
proc.nr_slot_rx = ssb_slot;
proc.gNB_id = 0;
for (int i = UE->symbol_offset + 1; i < UE->symbol_offset + 4; i++) {
nr_slot_fep(UE,
frame_parms,
proc.nr_slot_rx,
i % frame_parms->symbols_per_slot,
rxdataF,
link_type_dl,
0,
UE->common_vars.rxdata);
nr_pbch_channel_estimation(&UE->frame_parms,
&UE->SL_UE_PHY_PARAMS,
estimateSz,
dl_ch_estimates,
dl_ch_estimates_time,
&proc,
i % frame_parms->symbols_per_slot,
i - (UE->symbol_offset + 1),
ssb_index % 8,
n_hf,
frame_parms->ssb_start_subcarrier,
rxdataF,
false,
frame_parms->Nid_cell);
}
fapiPbch_t result;
int ret_ssb_idx;
int ret_symbol_offset;
ret = nr_rx_pbch(UE,
&proc,
true,
estimateSz,
dl_ch_estimates,
frame_parms,
ssb_index % 8,
frame_parms->ssb_start_subcarrier,
Nid_cell,
&result,
&n_hf,
&ret_ssb_idx,
&ret_symbol_offset,
frame_parms->samples_per_frame_wCP,
rxdataF);
if (ret == 0) {
uint32_t xtra_byte = nr_pbch_extra_byte_generation(frame,
n_hf,
ssb_index,
gNB->gNB_config.ssb_table.ssb_subcarrier_offset.value,
frame_parms->Lmax);
int payload_ret = (result.xtra_byte == xtra_byte);
nfapi_nr_dl_tti_ssb_pdu_rel15_t *pdu = &msgDataTx.ssb[ssb_index].ssb_pdu.ssb_pdu_rel15;
for (int i = 0; i < 3; i++)
payload_ret += (result.decoded_output[i] == ((pdu->bchPayload >> (8 * i)) & 0xff));
// printf("ret %d\n", payload_ret);
if (payload_ret != 4)
n_errors_payload++;
}
if (ret != 0)
n_errors++;
}
} //noise trials
printf("SNR %f: trials %d, n_errors_crc = %d, n_errors_payload %d\n", SNR,n_trials,n_errors,n_errors_payload);
if (((float)n_errors/(float)n_trials <= target_error_rate) && (n_errors_payload==0)) {
printf("PBCH test OK\n");
ret_test = 0;
break;
}
if (n_trials==1)
break;
} // NSR
free_channel_desc_scm(gNB2UE);
int nb_slots_to_set = (1 << mu) * NR_NUMBER_OF_SUBFRAMES_PER_FRAME;
for (int i = 0; i < nb_slots_to_set; ++i)
free(gNB->gNB_config.tdd_table.max_tdd_periodicity_list[i].max_num_of_symbol_per_slot_list);
free(gNB->gNB_config.tdd_table.max_tdd_periodicity_list);
phy_free_nr_gNB(gNB);
free(RC.gNB[0]);
free(RC.gNB);
term_nr_ue_signal(UE, 1);
free(UE);
for (i=0; i<2; i++) {
free(s_re[i]);
free(s_im[i]);
free(r_re[i]);
free(r_im[i]);
free(txdata[i]);
}
free(s_re);
free(s_im);
free(r_re);
free(r_im);
free(txdata);
if (output_fd)
fclose(output_fd);
if (input_fd)
fclose(input_fd);
loader_reset();
logTerm();
return ret_test;
}
Reference in New Issue View Git Blame Copy Permalink