openairinterface5g/executables/nr-softmodem.c

/*
 * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The OpenAirInterface Software Alliance licenses this file to You under
 * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 * except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.openairinterface.org/?page_id=698
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *-------------------------------------------------------------------------------
 * For more information about the OpenAirInterface (OAI) Software Alliance:
 *      contact@openairinterface.org
 */


#define _GNU_SOURCE             /* See feature_test_macros(7) */
#include <sched.h>


#include "T.h"

#undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all
#include <common/utils/assertions.h>

#include "PHY/types.h"
#include "common/ran_context.h"

#include "PHY/defs_gNB.h"
#include "PHY/defs_common.h"
#include "common/config/config_userapi.h"
#include "common/utils/load_module_shlib.h"
#undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all
//#undef FRAME_LENGTH_COMPLEX_SAMPLES //there are two conflicting definitions, so we better make sure we don't use it at all

#include "radio/COMMON/common_lib.h"
#include "radio/ETHERNET/USERSPACE/LIB/if_defs.h"

//#undef FRAME_LENGTH_COMPLEX_SAMPLES //there are two conflicting definitions, so we better make sure we don't use it at all

#include "PHY/phy_vars.h"
#include "RRC/LTE/rrc_vars.h"
#include "PHY_INTERFACE/phy_interface_vars.h"
#include "gnb_config.h"
#include "SIMULATION/TOOLS/sim.h"
#include "executables/lte-softmodem.h"

#ifdef SMBV
#include "PHY/TOOLS/smbv.h"
unsigned short config_frames[4] = {2,9,11,13};
#endif

#include "common/utils/LOG/log.h"
#include "common/utils/LOG/vcd_signal_dumper.h"
#include "UTIL/OPT/opt.h"

#include "intertask_interface.h"

#include "PHY/INIT/phy_init.h"

#include "system.h"
#include <openair2/GNB_APP/gnb_app.h>
#include "PHY/TOOLS/phy_scope_interface.h"
#include "PHY/TOOLS/nr_phy_scope.h"
#include "stats.h"
#include "nr-softmodem.h"
#include "executables/softmodem-common.h"
#include "executables/thread-common.h"
#include "NB_IoT_interface.h"
#include "x2ap_eNB.h"
#include "ngap_gNB.h"
#include "gnb_paramdef.h"
#include <openair3/ocp-gtpu/gtp_itf.h>
#include "nfapi/oai_integration/vendor_ext.h"
#include "gnb_config.h"
#include "openair2/E1AP/e1ap_common.h"
#include "openair2/E1AP/e1ap_api.h"

pthread_cond_t nfapi_sync_cond;
pthread_mutex_t nfapi_sync_mutex;
int nfapi_sync_var=-1; //!< protected by mutex \ref nfapi_sync_mutex

extern uint8_t nfapi_mode; // Default to monolithic mode
THREAD_STRUCT thread_struct;
pthread_cond_t sync_cond;
pthread_mutex_t sync_mutex;
int sync_var=-1; //!< protected by mutex \ref sync_mutex.
int config_sync_var=-1;

volatile int             start_gNB = 0;
int oai_exit = 0;

int NB_UE_INST = 0;

static int wait_for_sync = 0;

unsigned int mmapped_dma=0;
int single_thread_flag=1;

int8_t threequarter_fs=0;

uint64_t downlink_frequency[MAX_NUM_CCs][4];
int32_t uplink_frequency_offset[MAX_NUM_CCs][4];

//Temp fix for inexistent NR upper layer
unsigned char NB_gNB_INST = 1;
char *uecap_file;

runmode_t mode = normal_txrx;
static double snr_dB=20;

#if MAX_NUM_CCs == 1
rx_gain_t rx_gain_mode[MAX_NUM_CCs][4] = {{max_gain,max_gain,max_gain,max_gain}};
double tx_gain[MAX_NUM_CCs][4] = {{20,0,0,0}};
double rx_gain[MAX_NUM_CCs][4] = {{110,0,0,0}};
#else
rx_gain_t rx_gain_mode[MAX_NUM_CCs][4] = {{max_gain,max_gain,max_gain,max_gain},{max_gain,max_gain,max_gain,max_gain}};
double tx_gain[MAX_NUM_CCs][4] = {{20,0,0,0},{20,0,0,0}};
double rx_gain[MAX_NUM_CCs][4] = {{110,0,0,0},{20,0,0,0}};
#endif

double rx_gain_off = 0.0;

static int tx_max_power[MAX_NUM_CCs]; /* =  {0,0}*/;


int chain_offset=0;


uint8_t dci_Format = 0;
uint8_t agregation_Level =0xFF;

uint8_t nb_antenna_tx = 1;
uint8_t nb_antenna_rx = 1;

char ref[128] = "internal";
char channels[128] = "0";

int rx_input_level_dBm;

int otg_enabled;

//int number_of_cards = 1;


//static NR_DL_FRAME_PARMS      *frame_parms[MAX_NUM_CCs];
//static nfapi_nr_config_request_t *config[MAX_NUM_CCs];
uint32_t timing_advance = 0;
uint64_t num_missed_slots=0; // counter for the number of missed slots

#include <executables/split_headers.h>
#include <SIMULATION/ETH_TRANSPORT/proto.h>

int split73=0;
void sendFs6Ul(PHY_VARS_eNB *eNB, int UE_id, int harq_pid, int segmentID, int16_t *data, int dataLen, int r_offset) {
  AssertFatal(false, "Must not be called in this context\n");
}
void sendFs6Ulharq(enum pckType type, int UEid, PHY_VARS_eNB *eNB, LTE_eNB_UCI *uci, int frame, int subframe, uint8_t *harq_ack, uint8_t tdd_mapping_mode, uint16_t tdd_multiplexing_mask,
                   uint16_t rnti, int32_t stat) {
  AssertFatal(false, "Must not be called in this context\n");
}


extern void reset_opp_meas(void);
extern void print_opp_meas(void);

extern void *udp_eNB_task(void *args_p);

int transmission_mode=1;
int emulate_rf = 0;
int numerology = 0;


static char *parallel_config = NULL;
static char *worker_config = NULL;

/* struct for ethernet specific parameters given in eNB conf file */
eth_params_t *eth_params;

openair0_config_t openair0_cfg[MAX_CARDS];

double cpuf;


/* see file openair2/LAYER2/MAC/main.c for why abstraction_flag is needed
 * this is very hackish - find a proper solution
 */
uint8_t abstraction_flag=0;

/* forward declarations */
void set_default_frame_parms(nfapi_nr_config_request_scf_t *config[MAX_NUM_CCs], NR_DL_FRAME_PARMS *frame_parms[MAX_NUM_CCs]);

/*---------------------BMC: timespec helpers -----------------------------*/

struct timespec min_diff_time = { .tv_sec = 0, .tv_nsec = 0 };
struct timespec max_diff_time = { .tv_sec = 0, .tv_nsec = 0 };

struct timespec clock_difftime(struct timespec start, struct timespec end) {
  struct timespec temp;

  if ((end.tv_nsec-start.tv_nsec)<0) {
    temp.tv_sec = end.tv_sec-start.tv_sec-1;
    temp.tv_nsec = 1000000000+end.tv_nsec-start.tv_nsec;
  } else {
    temp.tv_sec = end.tv_sec-start.tv_sec;
    temp.tv_nsec = end.tv_nsec-start.tv_nsec;
  }

  return temp;
}

void print_difftimes(void) {
#ifdef DEBUG
  printf("difftimes min = %lu ns ; max = %lu ns\n", min_diff_time.tv_nsec, max_diff_time.tv_nsec);
#else
  LOG_I(HW,"difftimes min = %lu ns ; max = %lu ns\n", min_diff_time.tv_nsec, max_diff_time.tv_nsec);
#endif
}

void update_difftimes(struct timespec start, struct timespec end) {
  struct timespec diff_time = { .tv_sec = 0, .tv_nsec = 0 };
  int             changed = 0;
  diff_time = clock_difftime(start, end);

  if ((min_diff_time.tv_nsec == 0) || (diff_time.tv_nsec < min_diff_time.tv_nsec)) {
    min_diff_time.tv_nsec = diff_time.tv_nsec;
    changed = 1;
  }

  if ((max_diff_time.tv_nsec == 0) || (diff_time.tv_nsec > max_diff_time.tv_nsec)) {
    max_diff_time.tv_nsec = diff_time.tv_nsec;
    changed = 1;
  }

#if 1

  if (changed) print_difftimes();

#endif
}

/*------------------------------------------------------------------------*/

unsigned int build_rflocal(int txi, int txq, int rxi, int rxq) {
  return (txi + (txq<<6) + (rxi<<12) + (rxq<<18));
}
unsigned int build_rfdc(int dcoff_i_rxfe, int dcoff_q_rxfe) {
  return (dcoff_i_rxfe + (dcoff_q_rxfe<<8));
}


#define KNRM  "\x1B[0m"
#define KRED  "\x1B[31m"
#define KGRN  "\x1B[32m"
#define KBLU  "\x1B[34m"
#define RESET "\033[0m"


void exit_function(const char *file, const char *function, const int line, const char *s) {
  int ru_id;

  if (s != NULL) {
    printf("%s:%d %s() Exiting OAI softmodem: %s\n",file,line, function, s);
  }

  oai_exit = 1;

  if (RC.ru == NULL)
    exit(-1); // likely init not completed, prevent crash or hang, exit now...

  for (ru_id=0; ru_id<RC.nb_RU; ru_id++) {
    if (RC.ru[ru_id] && RC.ru[ru_id]->rfdevice.trx_end_func) {
      RC.ru[ru_id]->rfdevice.trx_end_func(&RC.ru[ru_id]->rfdevice);
      RC.ru[ru_id]->rfdevice.trx_end_func = NULL;
    }

    if (RC.ru[ru_id] && RC.ru[ru_id]->ifdevice.trx_end_func) {
      RC.ru[ru_id]->ifdevice.trx_end_func(&RC.ru[ru_id]->ifdevice);
      RC.ru[ru_id]->ifdevice.trx_end_func = NULL;
    }
  }

  sleep(1); //allow lte-softmodem threads to exit first
  exit(1);
}



static int create_gNB_tasks(void) {
  uint32_t                        gnb_nb = RC.nb_nr_inst; 
  uint32_t                        gnb_id_start = 0;
  uint32_t                        gnb_id_end = gnb_id_start + gnb_nb;
  LOG_D(GNB_APP, "%s(gnb_nb:%d)\n", __FUNCTION__, gnb_nb);
  itti_wait_ready(1);
  LOG_I(PHY, "%s() Task ready initialize structures\n", __FUNCTION__);

  RCconfig_NR_L1();
  RCconfig_nr_prs();

  if (RC.nb_nr_macrlc_inst>0) RCconfig_nr_macrlc();

  LOG_I(PHY, "%s() RC.nb_nr_L1_inst:%d\n", __FUNCTION__, RC.nb_nr_L1_inst);

  if (RC.nb_nr_L1_inst>0) AssertFatal(l1_north_init_gNB()==0,"could not initialize L1 north interface\n");

  AssertFatal (gnb_nb <= RC.nb_nr_inst,
               "Number of gNB is greater than gNB defined in configuration file (%d/%d)!",
               gnb_nb, RC.nb_nr_inst);

  LOG_I(GNB_APP,"Allocating gNB_RRC_INST for %d instances\n",RC.nb_nr_inst);

  RC.nrrrc = (gNB_RRC_INST **)malloc(RC.nb_nr_inst*sizeof(gNB_RRC_INST *));
  LOG_I(PHY, "%s() RC.nb_nr_inst:%d RC.nrrrc:%p\n", __FUNCTION__, RC.nb_nr_inst, RC.nrrrc);
  ngran_node_t node_type = get_node_type();
  for (int gnb_id = gnb_id_start; (gnb_id < gnb_id_end) ; gnb_id++) {
    RC.nrrrc[gnb_id] = (gNB_RRC_INST*)calloc(1,sizeof(gNB_RRC_INST));
    LOG_I(PHY, "%s() Creating RRC instance RC.nrrrc[%d]:%p (%d of %d)\n", __FUNCTION__, gnb_id, RC.nrrrc[gnb_id], gnb_id+1, gnb_id_end);
    configure_nr_rrc(gnb_id);
  }

  if (RC.nb_nr_inst > 0 &&
      !get_softmodem_params()->nsa &&
      !(node_type == ngran_gNB_DU))  {
    // we start pdcp in both cuup (for drb) and cucp (for srb)
    init_pdcp();
  }

  if (is_x2ap_enabled() ) { //&& !NODE_IS_DU(node_type)
	  LOG_I(X2AP, "X2AP enabled \n");
	  __attribute__((unused)) uint32_t x2_register_gnb_pending = gNB_app_register_x2 (gnb_id_start, gnb_id_end);
  }

  /* For the CU case the gNB registration with the AMF might have to take place after the F1 setup, as the PLMN info
     * can originate from the DU. Add check on whether x2ap is enabled to account for ENDC NSA scenario.*/
  if ((get_softmodem_params()->sa || is_x2ap_enabled()) &&
      !NODE_IS_DU(node_type)) {
    /* Try to register each gNB */
    //registered_gnb = 0;
    __attribute__((unused)) uint32_t register_gnb_pending = gNB_app_register (gnb_id_start, gnb_id_end);
  }

  if (gnb_nb > 0) {
    if(itti_create_task(TASK_SCTP, sctp_eNB_task, NULL) < 0) {
      LOG_E(SCTP, "Create task for SCTP failed\n");
      return -1;
    }

    if (is_x2ap_enabled()) {
      if(itti_create_task(TASK_X2AP, x2ap_task, NULL) < 0) {
        LOG_E(X2AP, "Create task for X2AP failed\n");
      }
    } else {
      LOG_I(X2AP, "X2AP is disabled.\n");
    }
  }

  if (get_softmodem_params()->sa &&
      !NODE_IS_DU(node_type)) {

    char*             gnb_ipv4_address_for_NGU      = NULL;
    uint32_t          gnb_port_for_NGU              = 0;
    char*             gnb_ipv4_address_for_S1U      = NULL;
    uint32_t          gnb_port_for_S1U              = 0;
    paramdef_t NETParams[]  =  GNBNETPARAMS_DESC;
    char aprefix[MAX_OPTNAME_SIZE*2 + 8];
    sprintf(aprefix,"%s.[%i].%s",GNB_CONFIG_STRING_GNB_LIST,0,GNB_CONFIG_STRING_NETWORK_INTERFACES_CONFIG);
    config_get( NETParams,sizeof(NETParams)/sizeof(paramdef_t),aprefix);
    
    for(int i = GNB_INTERFACE_NAME_FOR_NG_AMF_IDX; i <= GNB_IPV4_ADDRESS_FOR_NG_AMF_IDX; i++) {
      if( NETParams[i].strptr == NULL) {
        LOG_E(NGAP, "No AMF configuration in the file.\n");
        exit(1);
      } else {
        LOG_D(NGAP, "Configuration in the file: %s.\n",*NETParams[i].strptr);
      }
    }
    
    if (gnb_nb > 0) {
      if (itti_create_task (TASK_NGAP, ngap_gNB_task, NULL) < 0) {
        LOG_E(NGAP, "Create task for NGAP failed\n");
        return -1;
      }
    }
  }

  if (gnb_nb > 0) {
    if (itti_create_task (TASK_GNB_APP, gNB_app_task, NULL) < 0) {
      LOG_E(GNB_APP, "Create task for gNB APP failed\n");
      return -1;
    }

    LOG_I(NR_RRC, "Creating NR RRC gNB Task, that will also create TASKS\n");
    if (itti_create_task (TASK_RRC_GNB, rrc_gnb_task, NULL) < 0) {
      LOG_E(NR_RRC, "Create task for NR RRC gNB failed\n");
      return -1;
    }

    // If CU
    if (node_type == ngran_gNB_CU || node_type == ngran_gNB) {
      MessageDef *msg = RCconfig_NR_CU_E1(false);
      instance_t inst = 0;
      createE1inst(UPtype, inst, &E1AP_SETUP_REQ(msg));
      cuup_init_n3(inst);
      itti_free(TASK_UNKNOWN, msg);
      getCxtE1(inst)->same_process = true;
      ;
      RC.nrrrc[gnb_id_start]->e1_inst = inst; // stupid instance !!!*/
    }

    //Use check on x2ap to consider the NSA scenario 
    if((is_x2ap_enabled() || get_softmodem_params()->sa) && (node_type != ngran_gNB_CUCP)) {
      if (itti_create_task (TASK_GTPV1_U, &gtpv1uTask, NULL) < 0) {
        LOG_E(GTPU, "Create task for GTPV1U failed\n");
        return -1;
      }
    }
  }

  return 0;
}


static void get_options(void) {
  paramdef_t cmdline_params[] = CMDLINE_PARAMS_DESC_GNB ;
  CONFIG_SETRTFLAG(CONFIG_NOEXITONHELP);
  get_common_options(SOFTMODEM_GNB_BIT );
  config_process_cmdline( cmdline_params,sizeof(cmdline_params)/sizeof(paramdef_t),NULL);
  CONFIG_CLEARRTFLAG(CONFIG_NOEXITONHELP);

  if ( !(CONFIG_ISFLAGSET(CONFIG_ABORT)) ) {
    memset((void *)&RC,0,sizeof(RC));
    /* Read RC configuration file */
    NRRCConfig();
    NB_gNB_INST = RC.nb_nr_inst;
    NB_RU   = RC.nb_RU;
    printf("Configuration: nb_rrc_inst %d, nb_nr_L1_inst %d, nb_ru %hhu\n",NB_gNB_INST,RC.nb_nr_L1_inst,NB_RU);
  }

  if(parallel_config != NULL) set_parallel_conf(parallel_config);

  if(worker_config != NULL) set_worker_conf(worker_config);
}


void set_default_frame_parms(nfapi_nr_config_request_scf_t *config[MAX_NUM_CCs],
                             NR_DL_FRAME_PARMS *frame_parms[MAX_NUM_CCs]) {
  for (int CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
    frame_parms[CC_id] = (NR_DL_FRAME_PARMS *) malloc(sizeof(NR_DL_FRAME_PARMS));
    config[CC_id] = (nfapi_nr_config_request_scf_t *) malloc(sizeof(nfapi_nr_config_request_scf_t));
    config[CC_id]->ssb_config.scs_common.value = 1;
    config[CC_id]->cell_config.frame_duplex_type.value = 1; //FDD
    //config[CC_id]->subframe_config.dl_cyclic_prefix_type.value = 0; //NORMAL
    config[CC_id]->carrier_config.dl_grid_size[1].value = 106;
    config[CC_id]->carrier_config.ul_grid_size[1].value = 106;
    config[CC_id]->cell_config.phy_cell_id.value = 0;
    ///dl frequency to be filled in
    /*  //Set some default values that may be overwritten while reading options
        frame_parms[CC_id]->frame_type          = FDD;
        frame_parms[CC_id]->tdd_config          = 3;
        frame_parms[CC_id]->tdd_config_S        = 0;
        frame_parms[CC_id]->N_RB_DL             = 100;
        frame_parms[CC_id]->N_RB_UL             = 100;
        frame_parms[CC_id]->Ncp                 = NORMAL;
        frame_parms[CC_id]->Ncp_UL              = NORMAL;
        frame_parms[CC_id]->Nid_cell            = 0;
        frame_parms[CC_id]->num_MBSFN_config    = 0;
        frame_parms[CC_id]->nb_antenna_ports_gNB  = 1;
        frame_parms[CC_id]->nb_antennas_tx      = 1;
        frame_parms[CC_id]->nb_antennas_rx      = 1;

        frame_parms[CC_id]->nushift             = 0;

        frame_parms[CC_id]->phich_config_common.phich_resource = oneSixth;
        frame_parms[CC_id]->phich_config_common.phich_duration = normal;
        // UL RS Config
        frame_parms[CC_id]->pusch_config_common.ul_ReferenceSignalsPUSCH.cyclicShift = 0;//n_DMRS1 set to 0
        frame_parms[CC_id]->pusch_config_common.ul_ReferenceSignalsPUSCH.groupHoppingEnabled = 0;
        frame_parms[CC_id]->pusch_config_common.ul_ReferenceSignalsPUSCH.sequenceHoppingEnabled = 0;
        frame_parms[CC_id]->pusch_config_common.ul_ReferenceSignalsPUSCH.groupAssignmentPUSCH = 0;

        frame_parms[CC_id]->prach_config_common.rootSequenceIndex=22;
        frame_parms[CC_id]->prach_config_common.prach_ConfigInfo.zeroCorrelationZoneConfig=1;
        frame_parms[CC_id]->prach_config_common.prach_ConfigInfo.prach_ConfigIndex=0;
        frame_parms[CC_id]->prach_config_common.prach_ConfigInfo.highSpeedFlag=0;
        frame_parms[CC_id]->prach_config_common.prach_ConfigInfo.prach_FreqOffset=0;

    //    downlink_frequency[CC_id][0] = 2680000000; // Use float to avoid issue with frequency over 2^31.
    //    downlink_frequency[CC_id][1] = downlink_frequency[CC_id][0];
    //    downlink_frequency[CC_id][2] = downlink_frequency[CC_id][0];
    //    downlink_frequency[CC_id][3] = downlink_frequency[CC_id][0];
        //printf("Downlink for CC_id %d frequency set to %u\n", CC_id, downlink_frequency[CC_id][0]);
        frame_parms[CC_id]->dl_CarrierFreq=downlink_frequency[CC_id][0];
    */
  }
}

void wait_RUs(void) {
  LOG_I(PHY,"Waiting for RUs to be configured ... RC.ru_mask:%02lx\n", RC.ru_mask);
  // wait for all RUs to be configured over fronthaul
  pthread_mutex_lock(&RC.ru_mutex);

  while (RC.ru_mask>0) {
    pthread_cond_wait(&RC.ru_cond,&RC.ru_mutex);
    printf("RC.ru_mask:%02lx\n", RC.ru_mask);
  }

  pthread_mutex_unlock(&RC.ru_mutex);
  LOG_I(PHY,"RUs configured\n");
}

void wait_gNBs(void) {
  int i;
  int waiting=1;

  while (waiting==1) {
    printf("Waiting for gNB L1 instances to all get configured ... sleeping 50ms (nb_nr_sL1_inst %d)\n",RC.nb_nr_L1_inst);
    usleep(50*1000);
    waiting=0;

    for (i=0; i<RC.nb_nr_L1_inst; i++) {
      if (RC.gNB[i]->configured==0) {
        waiting=1;
        break;
      }
    }
  }

  printf("gNB L1 are configured\n");
}

/*
 * helper function to terminate a certain ITTI task
 */
void terminate_task(task_id_t task_id, module_id_t mod_id) {
  LOG_I(GNB_APP, "sending TERMINATE_MESSAGE to task %s (%d)\n", itti_get_task_name(task_id), task_id);
  MessageDef *msg;
  msg = itti_alloc_new_message (ENB_APP, 0, TERMINATE_MESSAGE);
  itti_send_msg_to_task (task_id, ENB_MODULE_ID_TO_INSTANCE(mod_id), msg);
}

//extern void  free_transport(PHY_VARS_gNB *);
extern void  nr_phy_free_RU(RU_t *);

static  void wait_nfapi_init(char *thread_name) {
  printf( "waiting for NFAPI PNF connection and population of global structure (%s)\n",thread_name);
  pthread_mutex_lock( &nfapi_sync_mutex );

  while (nfapi_sync_var<0)
    pthread_cond_wait( &nfapi_sync_cond, &nfapi_sync_mutex );

  pthread_mutex_unlock(&nfapi_sync_mutex);
  printf( "NFAPI: got sync (%s)\n", thread_name);
}

void init_pdcp(void) {
  uint32_t pdcp_initmask = (IS_SOFTMODEM_NOS1) ?
    PDCP_USE_NETLINK_BIT | LINK_ENB_PDCP_TO_IP_DRIVER_BIT | ENB_NAS_USE_TUN_BIT | SOFTMODEM_NOKRNMOD_BIT:
    LINK_ENB_PDCP_TO_GTPV1U_BIT;
  
  if (!get_softmodem_params()->nsa) {
    if (!NODE_IS_DU(get_node_type())) {
      pdcp_layer_init();
      nr_pdcp_module_init(pdcp_initmask, 0);
    }
  } else {
    pdcp_layer_init();
    nr_pdcp_module_init(pdcp_initmask, 0);
  }
}

int main( int argc, char **argv ) {
  int ru_id, CC_id = 0;
  start_background_system();

  ///static configuration for NR at the moment
  if ( load_configmodule(argc,argv,CONFIG_ENABLECMDLINEONLY) == NULL) {
    exit_fun("[SOFTMODEM] Error, configuration module init failed\n");
  }

  set_softmodem_sighandler();
#ifdef DEBUG_CONSOLE
  setvbuf(stdout, NULL, _IONBF, 0);
  setvbuf(stderr, NULL, _IONBF, 0);
#endif
  mode = normal_txrx;
  memset(&openair0_cfg[0],0,sizeof(openair0_config_t)*MAX_CARDS);
  memset(tx_max_power,0,sizeof(int)*MAX_NUM_CCs);
  logInit();
  set_latency_target();
  printf("Reading in command-line options\n");
  get_options ();

  EPC_MODE_ENABLED = !IS_SOFTMODEM_NOS1;

  if (CONFIG_ISFLAGSET(CONFIG_ABORT) ) {
    fprintf(stderr,"Getting configuration failed\n");
    exit(-1);
  }

  openair0_cfg[0].threequarter_fs = threequarter_fs;

  if (get_softmodem_params()->do_ra)
    AssertFatal(get_softmodem_params()->phy_test == 0,"RA and phy_test are mutually exclusive\n");

  if (get_softmodem_params()->sa)
    AssertFatal(get_softmodem_params()->phy_test == 0,"Standalone mode and phy_test are mutually exclusive\n");

#if T_TRACER
  T_Config_Init();
#endif
  //randominit (0);
  set_taus_seed (0);
  printf("configuring for RAU/RRU\n");

  if (opp_enabled ==1) {
    reset_opp_meas();
  }

  cpuf=get_cpu_freq_GHz();
  itti_init(TASK_MAX, tasks_info);
  // initialize mscgen log after ITTI
  init_opt();
  if(PDCP_USE_NETLINK && !IS_SOFTMODEM_NOS1) {
    netlink_init();
    if (get_softmodem_params()->nsa) {
      init_pdcp();
    }
  }
#ifndef PACKAGE_VERSION
#  define PACKAGE_VERSION "UNKNOWN-EXPERIMENTAL"
#endif
  LOG_I(HW, "Version: %s\n", PACKAGE_VERSION);

  if (RC.nb_nr_L1_inst > 0)
    RCconfig_NR_L1();

  // don't create if node doesn't connect to RRC/S1/GTP
  if (NFAPI_MODE != NFAPI_MODE_PNF) {
    int ret = create_gNB_tasks();
    AssertFatal(ret == 0, "cannot create ITTI tasks\n");
  }

  // init UE_PF_PO and mutex lock
  pthread_mutex_init(&ue_pf_po_mutex, NULL);
  memset (&UE_PF_PO[0][0], 0, sizeof(UE_PF_PO_t)*NUMBER_OF_UE_MAX*MAX_NUM_CCs);
  mlockall(MCL_CURRENT | MCL_FUTURE);
  pthread_cond_init(&sync_cond,NULL);
  pthread_mutex_init(&sync_mutex, NULL);
  usleep(1000);

  if (NFAPI_MODE) {
    printf("NFAPI*** - mutex and cond created - will block shortly for completion of PNF connection\n");
    pthread_cond_init(&sync_cond,NULL);
    pthread_mutex_init(&sync_mutex, NULL);
  }

  printf("START MAIN THREADS\n");
  // start the main threads
  number_of_cards = 1;
  printf("RC.nb_nr_L1_inst:%d\n", RC.nb_nr_L1_inst);

  if (RC.nb_nr_L1_inst > 0) {
    printf("Initializing gNB threads single_thread_flag:%d wait_for_sync:%d\n", single_thread_flag,wait_for_sync);
    init_gNB(single_thread_flag,wait_for_sync);
  }

  printf("wait_gNBs()\n");
  wait_gNBs();
  printf("About to Init RU threads RC.nb_RU:%d\n", RC.nb_RU);
  int sl_ahead=6;
  if (RC.nb_RU >0) {
    printf("Initializing RU threads\n");
    init_NR_RU(get_softmodem_params()->rf_config_file);

    for (ru_id=0; ru_id<RC.nb_RU; ru_id++) {
      RC.ru[ru_id]->rf_map.card=0;
      RC.ru[ru_id]->rf_map.chain=CC_id+chain_offset;
      if (ru_id==0) sl_ahead = RC.ru[ru_id]->sl_ahead;	
      else AssertFatal(RC.ru[ru_id]->sl_ahead != RC.ru[0]->sl_ahead,"RU %d has different sl_ahead %d than RU 0 %d\n",ru_id,RC.ru[ru_id]->sl_ahead,RC.ru[0]->sl_ahead);
    }
    
  }

  config_sync_var=0;

  if (NFAPI_MODE==NFAPI_MODE_PNF) {
    wait_nfapi_init("main?");
  }

  if (RC.nb_nr_L1_inst > 0) {
    printf("wait RUs\n");
    wait_RUs();
    printf("ALL RUs READY!\n");
    printf("RC.nb_RU:%d\n", RC.nb_RU);
    // once all RUs are ready initialize the rest of the gNBs ((dependence on final RU parameters after configuration)
    printf("ALL RUs ready - init gNBs\n");

    for (int idx=0;idx<RC.nb_nr_L1_inst;idx++) RC.gNB[idx]->if_inst->sl_ahead = sl_ahead;
    if(IS_SOFTMODEM_DOSCOPE) {
      sleep(1);
      scopeParms_t p;
      p.argc=&argc;
      p.argv=argv;
      p.gNB=RC.gNB[0];
      p.ru=RC.ru[0];
      load_softscope("nr",&p);
    }

    if (NFAPI_MODE != NFAPI_MODE_PNF && NFAPI_MODE != NFAPI_MODE_VNF) {
      printf("Not NFAPI mode - call init_eNB_afterRU()\n");
      init_eNB_afterRU();
    } else {
      printf("NFAPI mode - DO NOT call init_gNB_afterRU()\n");
    }

    printf("ALL RUs ready - ALL gNBs ready\n");
    // connect the TX/RX buffers
    printf("Sending sync to all threads\n");
    pthread_mutex_lock(&sync_mutex);
    sync_var=0;
    pthread_cond_broadcast(&sync_cond);
    pthread_mutex_unlock(&sync_mutex);
  }

  // wait for end of program
  printf("Entering ITTI signals handler\n");
  printf("TYPE <CTRL-C> TO TERMINATE\n");
  itti_wait_tasks_end();
  printf("Returned from ITTI signal handler\n");
  oai_exit=1;
  printf("oai_exit=%d\n",oai_exit);

  // cleanup
  if (RC.nb_nr_L1_inst > 0)
    stop_gNB(RC.nb_nr_L1_inst);

  if (RC.nb_RU > 0)
    stop_RU(RC.nb_RU);

  /* release memory used by the RU/gNB threads (incomplete), after all
   * threads have been stopped (they partially use the same memory) */
  for (int inst = 0; inst < RC.nb_RU; inst++) {
    nr_phy_free_RU(RC.ru[inst]);
  }

  for (int inst = 0; inst < RC.nb_nr_L1_inst; inst++) {
    phy_free_nr_gNB(RC.gNB[inst]);
  }

  pthread_cond_destroy(&sync_cond);
  pthread_mutex_destroy(&sync_mutex);
  pthread_cond_destroy(&nfapi_sync_cond);
  pthread_mutex_destroy(&nfapi_sync_mutex);
  pthread_mutex_destroy(&ue_pf_po_mutex);

  // *** Handle per CC_id openair0

  for(ru_id = 0; ru_id < RC.nb_RU; ru_id++) {
    if (RC.ru[ru_id]->ifdevice.trx_end_func)
      RC.ru[ru_id]->ifdevice.trx_end_func(&RC.ru[ru_id]->ifdevice);
  }

  logClean();
  printf("Bye.\n");
  return 0;
}