maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
4756c5a167391b019341b97b5dff7484de250eaa
openairinterface5g/executables/nr-softmodem.c
T

898 lines
28 KiB
C
Raw Blame History

/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
#define _GNU_SOURCE /* See feature_test_macros(7) */
#include <sched.h>
#include "T.h"
#undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all
#include <common/utils/assertions.h>
#include "msc.h"
#include "PHY/types.h"
#include "common/ran_context.h"
#include "PHY/defs_gNB.h"
#include "PHY/defs_common.h"
#include "common/config/config_userapi.h"
#include "common/utils/load_module_shlib.h"
#undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all
//#undef FRAME_LENGTH_COMPLEX_SAMPLES //there are two conflicting definitions, so we better make sure we don't use it at all
#include "../../ARCH/COMMON/common_lib.h"
#include "../../ARCH/ETHERNET/USERSPACE/LIB/if_defs.h"
//#undef FRAME_LENGTH_COMPLEX_SAMPLES //there are two conflicting definitions, so we better make sure we don't use it at all
#include "PHY/phy_vars.h"
#include "SCHED/sched_common_vars.h"
#include "LAYER2/MAC/mac_vars.h"
#include "RRC/LTE/rrc_vars.h"
#include "PHY_INTERFACE/phy_interface_vars.h"
#include "gnb_config.h"
#include "SIMULATION/TOOLS/sim.h"
#include <targets/RT/USER/lte-softmodem.h>
#ifdef SMBV
#include "PHY/TOOLS/smbv.h"
unsigned short config_frames[4] = {2,9,11,13};
#endif
#include "common/utils/LOG/log.h"
#include "common/utils/LOG/vcd_signal_dumper.h"
#include "UTIL/OPT/opt.h"
//#include "PHY/TOOLS/time_meas.h"
#include "intertask_interface.h"
#include "PHY/INIT/phy_init.h"
#include "system.h"
#include <openair2/GNB_APP/gnb_app.h>
#include "PHY/TOOLS/phy_scope_interface.h"
#include "PHY/TOOLS/nr_phy_scope.h"
#include "stats.h"
#include "nr-softmodem.h"
#include "executables/softmodem-common.h"
#include "executables/thread-common.h"
#include "NB_IoT_interface.h"
#include "x2ap_eNB.h"
#include "ngap_gNB.h"
#include "gnb_paramdef.h"
#include <openair3/ocp-gtpu/gtp_itf.h>
#include "nfapi/oai_integration/vendor_ext.h"
pthread_cond_t nfapi_sync_cond;
pthread_mutex_t nfapi_sync_mutex;
int nfapi_sync_var=-1; //!< protected by mutex \ref nfapi_sync_mutex
extern uint8_t nfapi_mode; // Default to monolithic mode
THREAD_STRUCT thread_struct;
pthread_cond_t sync_cond;
pthread_mutex_t sync_mutex;
int sync_var=-1; //!< protected by mutex \ref sync_mutex.
int config_sync_var=-1;
volatile int start_gNB = 0;
volatile int oai_exit = 0;
static int wait_for_sync = 0;
unsigned int mmapped_dma=0;
int single_thread_flag=1;
int8_t threequarter_fs=0;
uint64_t downlink_frequency[MAX_NUM_CCs][4];
int32_t uplink_frequency_offset[MAX_NUM_CCs][4];
//Temp fix for inexistent NR upper layer
unsigned char NB_gNB_INST = 1;
char *uecap_file;
runmode_t mode = normal_txrx;
static double snr_dB=20;
#if MAX_NUM_CCs == 1
rx_gain_t rx_gain_mode[MAX_NUM_CCs][4] = {{max_gain,max_gain,max_gain,max_gain}};
double tx_gain[MAX_NUM_CCs][4] = {{20,0,0,0}};
double rx_gain[MAX_NUM_CCs][4] = {{110,0,0,0}};
#else
rx_gain_t rx_gain_mode[MAX_NUM_CCs][4] = {{max_gain,max_gain,max_gain,max_gain},{max_gain,max_gain,max_gain,max_gain}};
double tx_gain[MAX_NUM_CCs][4] = {{20,0,0,0},{20,0,0,0}};
double rx_gain[MAX_NUM_CCs][4] = {{110,0,0,0},{20,0,0,0}};
#endif
double rx_gain_off = 0.0;
static int tx_max_power[MAX_NUM_CCs]; /* = {0,0}*/;
int chain_offset=0;
uint8_t dci_Format = 0;
uint8_t agregation_Level =0xFF;
uint8_t nb_antenna_tx = 1;
uint8_t nb_antenna_rx = 1;
char ref[128] = "internal";
char channels[128] = "0";
int rx_input_level_dBm;
int otg_enabled;
//int number_of_cards = 1;
//static NR_DL_FRAME_PARMS *frame_parms[MAX_NUM_CCs];
//static nfapi_nr_config_request_t *config[MAX_NUM_CCs];
uint32_t timing_advance = 0;
uint64_t num_missed_slots=0; // counter for the number of missed slots
#include <executables/split_headers.h>
#include <SIMULATION/ETH_TRANSPORT/proto.h>
int split73=0;
void sendFs6Ul(PHY_VARS_eNB *eNB, int UE_id, int harq_pid, int segmentID, int16_t *data, int dataLen, int r_offset) {
AssertFatal(false, "Must not be called in this context\n");
}
void sendFs6Ulharq(enum pckType type, int UEid, PHY_VARS_eNB *eNB, LTE_eNB_UCI *uci, int frame, int subframe, uint8_t *harq_ack, uint8_t tdd_mapping_mode, uint16_t tdd_multiplexing_mask,
uint16_t rnti, int32_t stat) {
AssertFatal(false, "Must not be called in this context\n");
}
extern void reset_opp_meas(void);
extern void print_opp_meas(void);
extern void *udp_eNB_task(void *args_p);
int transmission_mode=1;
int emulate_rf = 0;
int numerology = 0;
static char *parallel_config = NULL;
static char *worker_config = NULL;
/* struct for ethernet specific parameters given in eNB conf file */
eth_params_t *eth_params;
openair0_config_t openair0_cfg[MAX_CARDS];
double cpuf;
/* see file openair2/LAYER2/MAC/main.c for why abstraction_flag is needed
* this is very hackish - find a proper solution
*/
uint8_t abstraction_flag=0;
/* forward declarations */
void set_default_frame_parms(nfapi_nr_config_request_scf_t *config[MAX_NUM_CCs], NR_DL_FRAME_PARMS *frame_parms[MAX_NUM_CCs]);
/*---------------------BMC: timespec helpers -----------------------------*/
struct timespec min_diff_time = { .tv_sec = 0, .tv_nsec = 0 };
struct timespec max_diff_time = { .tv_sec = 0, .tv_nsec = 0 };
struct timespec clock_difftime(struct timespec start, struct timespec end) {
struct timespec temp;
if ((end.tv_nsec-start.tv_nsec)<0) {
temp.tv_sec = end.tv_sec-start.tv_sec-1;
temp.tv_nsec = 1000000000+end.tv_nsec-start.tv_nsec;
} else {
temp.tv_sec = end.tv_sec-start.tv_sec;
temp.tv_nsec = end.tv_nsec-start.tv_nsec;
}
return temp;
}
void print_difftimes(void) {
#ifdef DEBUG
printf("difftimes min = %lu ns ; max = %lu ns\n", min_diff_time.tv_nsec, max_diff_time.tv_nsec);
#else
LOG_I(HW,"difftimes min = %lu ns ; max = %lu ns\n", min_diff_time.tv_nsec, max_diff_time.tv_nsec);
#endif
}
void update_difftimes(struct timespec start, struct timespec end) {
struct timespec diff_time = { .tv_sec = 0, .tv_nsec = 0 };
int changed = 0;
diff_time = clock_difftime(start, end);
if ((min_diff_time.tv_nsec == 0) || (diff_time.tv_nsec < min_diff_time.tv_nsec)) {
min_diff_time.tv_nsec = diff_time.tv_nsec;
changed = 1;
}
if ((max_diff_time.tv_nsec == 0) || (diff_time.tv_nsec > max_diff_time.tv_nsec)) {
max_diff_time.tv_nsec = diff_time.tv_nsec;
changed = 1;
}
#if 1
if (changed) print_difftimes();
#endif
}
/*------------------------------------------------------------------------*/
unsigned int build_rflocal(int txi, int txq, int rxi, int rxq) {
return (txi + (txq<<6) + (rxi<<12) + (rxq<<18));
}
unsigned int build_rfdc(int dcoff_i_rxfe, int dcoff_q_rxfe) {
return (dcoff_i_rxfe + (dcoff_q_rxfe<<8));
}
#define KNRM "\x1B[0m"
#define KRED "\x1B[31m"
#define KGRN "\x1B[32m"
#define KBLU "\x1B[34m"
#define RESET "\033[0m"
void exit_function(const char *file, const char *function, const int line, const char *s) {
int ru_id;
if (s != NULL) {
printf("%s:%d %s() Exiting OAI softmodem: %s\n",file,line, function, s);
}
oai_exit = 1;
if (RC.ru == NULL)
exit(-1); // likely init not completed, prevent crash or hang, exit now...
for (ru_id=0; ru_id<RC.nb_RU; ru_id++) {
if (RC.ru[ru_id] && RC.ru[ru_id]->rfdevice.trx_end_func) {
RC.ru[ru_id]->rfdevice.trx_end_func(&RC.ru[ru_id]->rfdevice);
RC.ru[ru_id]->rfdevice.trx_end_func = NULL;
}
if (RC.ru[ru_id] && RC.ru[ru_id]->ifdevice.trx_end_func) {
RC.ru[ru_id]->ifdevice.trx_end_func(&RC.ru[ru_id]->ifdevice);
RC.ru[ru_id]->ifdevice.trx_end_func = NULL;
}
}
sleep(1); //allow lte-softmodem threads to exit first
exit(1);
}
int create_gNB_tasks(uint32_t gnb_nb) {
LOG_D(GNB_APP, "%s(gnb_nb:%d)\n", __FUNCTION__, gnb_nb);
itti_wait_ready(1);
if (gnb_nb > 0) {
/* Last task to create, others task must be ready before its start */
/*if (itti_create_task (TASK_GNB_APP, gNB_app_task, NULL) < 0) {
LOG_E(GNB_APP, "Create task for gNB APP failed\n");
return -1;
}*/
if(itti_create_task(TASK_SCTP, sctp_eNB_task, NULL) < 0) {
LOG_E(SCTP, "Create task for SCTP failed\n");
return -1;
}
if (is_x2ap_enabled()) {
if(itti_create_task(TASK_X2AP, x2ap_task, NULL) < 0) {
LOG_E(X2AP, "Create task for X2AP failed\n");
}
} else {
LOG_I(X2AP, "X2AP is disabled.\n");
}
}
if (AMF_MODE_ENABLED) {
char* gnb_ipv4_address_for_NGU = NULL;
uint32_t gnb_port_for_NGU = 0;
char* gnb_ipv4_address_for_S1U = NULL;
uint32_t gnb_port_for_S1U = 0;
paramdef_t NETParams[] = GNBNETPARAMS_DESC;
char aprefix[MAX_OPTNAME_SIZE*2 + 8];
sprintf(aprefix,"%s.[%i].%s",GNB_CONFIG_STRING_GNB_LIST,0,GNB_CONFIG_STRING_NETWORK_INTERFACES_CONFIG);
config_get( NETParams,sizeof(NETParams)/sizeof(paramdef_t),aprefix);
for(int i = GNB_INTERFACE_NAME_FOR_NG_AMF_IDX; i <= GNB_IPV4_ADDRESS_FOR_NG_AMF_IDX; i++) {
if( NETParams[i].strptr == NULL) {
LOG_E(NGAP, "No configuration in the file.\n");
NGAP_CONF_MODE = 0;
} else {
LOG_D(NGAP, "Configuration in the file: %s.\n",*NETParams[i].strptr);
}
}
if (gnb_nb > 0) {
if(NGAP_CONF_MODE) {
if (itti_create_task (TASK_NGAP, ngap_gNB_task, NULL) < 0) {
LOG_E(NGAP, "Create task for NGAP failed\n");
return -1;
}
} else {
LOG_I(NGAP, "Ngap task not created\n");
}
}
}
if (gnb_nb > 0) {
if (itti_create_task (TASK_GNB_APP, gNB_app_task, NULL) < 0) {
LOG_E(GNB_APP, "Create task for gNB APP failed\n");
return -1;
}
LOG_I(NR_RRC,"Creating NR RRC gNB Task\n");
if (itti_create_task (TASK_RRC_GNB, rrc_gnb_task, NULL) < 0) {
LOG_E(NR_RRC, "Create task for NR RRC gNB failed\n");
return -1;
}
//Use check on x2ap to consider the NSA scenario and check on AMF_MODE_ENABLED for the SA scenario
if(is_x2ap_enabled() || AMF_MODE_ENABLED) {
if (itti_create_task (TASK_GTPV1_U, &nr_gtpv1u_gNB_task, NULL) < 0) {
LOG_E(GTPU, "Create task for GTPV1U failed\n");
return -1;
}
}
}
return 0;
}
static void get_options(void) {
paramdef_t cmdline_params[] = CMDLINE_PARAMS_DESC_GNB ;
CONFIG_SETRTFLAG(CONFIG_NOEXITONHELP);
get_common_options(SOFTMODEM_GNB_BIT );
config_process_cmdline( cmdline_params,sizeof(cmdline_params)/sizeof(paramdef_t),NULL);
CONFIG_CLEARRTFLAG(CONFIG_NOEXITONHELP);
if ( !(CONFIG_ISFLAGSET(CONFIG_ABORT)) ) {
memset((void *)&RC,0,sizeof(RC));
/* Read RC configuration file */
NRRCConfig();
NB_gNB_INST = RC.nb_nr_inst;
NB_RU = RC.nb_RU;
printf("Configuration: nb_rrc_inst %d, nb_nr_L1_inst %d, nb_ru %hhu\n",NB_gNB_INST,RC.nb_nr_L1_inst,NB_RU);
}
if(parallel_config != NULL) set_parallel_conf(parallel_config);
if(worker_config != NULL) set_worker_conf(worker_config);
}
void set_default_frame_parms(nfapi_nr_config_request_scf_t *config[MAX_NUM_CCs],
NR_DL_FRAME_PARMS *frame_parms[MAX_NUM_CCs]) {
for (int CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
frame_parms[CC_id] = (NR_DL_FRAME_PARMS *) malloc(sizeof(NR_DL_FRAME_PARMS));
config[CC_id] = (nfapi_nr_config_request_scf_t *) malloc(sizeof(nfapi_nr_config_request_scf_t));
config[CC_id]->ssb_config.scs_common.value = 1;
config[CC_id]->cell_config.frame_duplex_type.value = 1; //FDD
//config[CC_id]->subframe_config.dl_cyclic_prefix_type.value = 0; //NORMAL
config[CC_id]->carrier_config.dl_grid_size[1].value = 106;
config[CC_id]->carrier_config.ul_grid_size[1].value = 106;
config[CC_id]->cell_config.phy_cell_id.value = 0;
///dl frequency to be filled in
/* //Set some default values that may be overwritten while reading options
frame_parms[CC_id]->frame_type = FDD;
frame_parms[CC_id]->tdd_config = 3;
frame_parms[CC_id]->tdd_config_S = 0;
frame_parms[CC_id]->N_RB_DL = 100;
frame_parms[CC_id]->N_RB_UL = 100;
frame_parms[CC_id]->Ncp = NORMAL;
frame_parms[CC_id]->Ncp_UL = NORMAL;
frame_parms[CC_id]->Nid_cell = 0;
frame_parms[CC_id]->num_MBSFN_config = 0;
frame_parms[CC_id]->nb_antenna_ports_gNB = 1;
frame_parms[CC_id]->nb_antennas_tx = 1;
frame_parms[CC_id]->nb_antennas_rx = 1;
frame_parms[CC_id]->nushift = 0;
frame_parms[CC_id]->phich_config_common.phich_resource = oneSixth;
frame_parms[CC_id]->phich_config_common.phich_duration = normal;
// UL RS Config
frame_parms[CC_id]->pusch_config_common.ul_ReferenceSignalsPUSCH.cyclicShift = 0;//n_DMRS1 set to 0
frame_parms[CC_id]->pusch_config_common.ul_ReferenceSignalsPUSCH.groupHoppingEnabled = 0;
frame_parms[CC_id]->pusch_config_common.ul_ReferenceSignalsPUSCH.sequenceHoppingEnabled = 0;
frame_parms[CC_id]->pusch_config_common.ul_ReferenceSignalsPUSCH.groupAssignmentPUSCH = 0;
frame_parms[CC_id]->prach_config_common.rootSequenceIndex=22;
frame_parms[CC_id]->prach_config_common.prach_ConfigInfo.zeroCorrelationZoneConfig=1;
frame_parms[CC_id]->prach_config_common.prach_ConfigInfo.prach_ConfigIndex=0;
frame_parms[CC_id]->prach_config_common.prach_ConfigInfo.highSpeedFlag=0;
frame_parms[CC_id]->prach_config_common.prach_ConfigInfo.prach_FreqOffset=0;
// downlink_frequency[CC_id][0] = 2680000000; // Use float to avoid issue with frequency over 2^31.
// downlink_frequency[CC_id][1] = downlink_frequency[CC_id][0];
// downlink_frequency[CC_id][2] = downlink_frequency[CC_id][0];
// downlink_frequency[CC_id][3] = downlink_frequency[CC_id][0];
//printf("Downlink for CC_id %d frequency set to %u\n", CC_id, downlink_frequency[CC_id][0]);
frame_parms[CC_id]->dl_CarrierFreq=downlink_frequency[CC_id][0];
*/
}
}
void wait_RUs(void) {
LOG_I(PHY,"Waiting for RUs to be configured ... RC.ru_mask:%02lx\n", RC.ru_mask);
// wait for all RUs to be configured over fronthaul
pthread_mutex_lock(&RC.ru_mutex);
while (RC.ru_mask>0) {
pthread_cond_wait(&RC.ru_cond,&RC.ru_mutex);
printf("RC.ru_mask:%02lx\n", RC.ru_mask);
}
pthread_mutex_unlock(&RC.ru_mutex);
LOG_I(PHY,"RUs configured\n");
}
void wait_gNBs(void) {
int i;
int waiting=1;
while (waiting==1) {
printf("Waiting for gNB L1 instances to all get configured ... sleeping 50ms (nb_nr_sL1_inst %d)\n",RC.nb_nr_L1_inst);
usleep(50*1000);
waiting=0;
for (i=0; i<RC.nb_nr_L1_inst; i++) {
if (RC.gNB[i]->configured==0) {
waiting=1;
break;
}
}
}
printf("gNB L1 are configured\n");
}
/*
* helper function to terminate a certain ITTI task
*/
void terminate_task(task_id_t task_id, module_id_t mod_id) {
LOG_I(GNB_APP, "sending TERMINATE_MESSAGE to task %s (%d)\n", itti_get_task_name(task_id), task_id);
MessageDef *msg;
msg = itti_alloc_new_message (ENB_APP, 0, TERMINATE_MESSAGE);
itti_send_msg_to_task (task_id, ENB_MODULE_ID_TO_INSTANCE(mod_id), msg);
}
//extern void free_transport(PHY_VARS_gNB *);
extern void nr_phy_free_RU(RU_t *);
int stop_L1L2(module_id_t gnb_id) {
LOG_W(GNB_APP, "stopping nr-softmodem\n");
oai_exit = 1;
if (!RC.ru) {
LOG_F(GNB_APP, "no RU configured\n");
return -1;
}
/* stop trx devices, multiple carrier currently not supported by RU */
if (RC.ru[gnb_id]) {
if (RC.ru[gnb_id]->rfdevice.trx_stop_func) {
RC.ru[gnb_id]->rfdevice.trx_stop_func(&RC.ru[gnb_id]->rfdevice);
LOG_I(GNB_APP, "turned off RU rfdevice\n");
} else {
LOG_W(GNB_APP, "can not turn off rfdevice due to missing trx_stop_func callback, proceeding anyway!\n");
}
if (RC.ru[gnb_id]->ifdevice.trx_stop_func) {
RC.ru[gnb_id]->ifdevice.trx_stop_func(&RC.ru[gnb_id]->ifdevice);
LOG_I(GNB_APP, "turned off RU ifdevice\n");
} else {
LOG_W(GNB_APP, "can not turn off ifdevice due to missing trx_stop_func callback, proceeding anyway!\n");
}
} else {
LOG_W(GNB_APP, "no RU found for index %d\n", gnb_id);
return -1;
}
/* these tasks need to pick up new configuration */
terminate_task(TASK_RRC_ENB, gnb_id);
LOG_I(GNB_APP, "calling kill_gNB_proc() for instance %d\n", gnb_id);
kill_gNB_proc(gnb_id);
LOG_I(GNB_APP, "calling kill_NR_RU_proc() for instance %d\n", gnb_id);
kill_NR_RU_proc(gnb_id);
oai_exit = 0;
//free_transport(RC.gNB[gnb_id]);
phy_free_nr_gNB(RC.gNB[gnb_id]);
nr_phy_free_RU(RC.ru[gnb_id]);
free_lte_top();
return 0;
}
/*
* Restart the nr-softmodem after it has been soft-stopped with stop_L1L2()
*/
int restart_L1L2(module_id_t gnb_id) {
RU_t *ru = RC.ru[gnb_id];
MessageDef *msg_p = NULL;
LOG_W(GNB_APP, "restarting nr-softmodem\n");
/* block threads */
sync_var = -1;
RC.gNB[gnb_id]->configured = 0;
RC.ru_mask |= (1 << ru->idx);
set_function_spec_param(RC.ru[gnb_id]);
LOG_I(GNB_APP, "attempting to create ITTI tasks\n");
// No more rrc thread, as many race conditions are hidden behind
rrc_enb_init();
itti_mark_task_ready(TASK_RRC_ENB);
/* pass a reconfiguration request which will configure everything down to
* RC.eNB[i][j]->frame_parms, too */
msg_p = itti_alloc_new_message(TASK_ENB_APP, 0, RRC_CONFIGURATION_REQ);
RRC_CONFIGURATION_REQ(msg_p) = RC.rrc[gnb_id]->configuration;
itti_send_msg_to_task(TASK_RRC_ENB, ENB_MODULE_ID_TO_INSTANCE(gnb_id), msg_p);
/* TODO XForms might need to be restarted, but it is currently (09/02/18)
* broken, so we cannot test it */
wait_gNBs();
init_RU_proc(ru);
ru->rf_map.card = 0;
ru->rf_map.chain = 0; /* CC_id + chain_offset;*/
wait_RUs();
init_eNB_afterRU();
printf("Sending sync to all threads\n");
pthread_mutex_lock(&sync_mutex);
sync_var=0;
pthread_cond_broadcast(&sync_cond);
pthread_mutex_unlock(&sync_mutex);
return 0;
}
static void wait_nfapi_init(char *thread_name) {
printf( "waiting for NFAPI PNF connection and population of global structure (%s)\n",thread_name);
pthread_mutex_lock( &nfapi_sync_mutex );
while (nfapi_sync_var<0)
pthread_cond_wait( &nfapi_sync_cond, &nfapi_sync_mutex );
pthread_mutex_unlock(&nfapi_sync_mutex);
printf( "NFAPI: got sync (%s)\n", thread_name);
}
void init_pdcp(void) {
if (!get_softmodem_params()->nsa) {
if (!NODE_IS_DU(RC.nrrrc[0]->node_type)) {
//pdcp_layer_init();
uint32_t pdcp_initmask = (IS_SOFTMODEM_NOS1) ?
(PDCP_USE_NETLINK_BIT | LINK_ENB_PDCP_TO_IP_DRIVER_BIT) : LINK_ENB_PDCP_TO_GTPV1U_BIT;
if (IS_SOFTMODEM_NOS1) {
printf("IS_SOFTMODEM_NOS1 option enabled \n");
pdcp_initmask = pdcp_initmask | ENB_NAS_USE_TUN_BIT | SOFTMODEM_NOKRNMOD_BIT;
}
nr_pdcp_module_init(pdcp_initmask, 0);
if (NODE_IS_CU(RC.nrrrc[0]->node_type)) {
LOG_I(PDCP, "node is CU, pdcp send rlc_data_req by proto_agent \n");
pdcp_set_rlc_data_req_func((send_rlc_data_req_func_t)proto_agent_send_rlc_data_req);
} else {
LOG_I(PDCP, "node is gNB \n");
pdcp_set_rlc_data_req_func((send_rlc_data_req_func_t) rlc_data_req);
pdcp_set_pdcp_data_ind_func((pdcp_data_ind_func_t) pdcp_data_ind);
}
} else {
LOG_I(PDCP, "node is DU, rlc send pdcp_data_ind by proto_agent \n");
pdcp_set_pdcp_data_ind_func((pdcp_data_ind_func_t) proto_agent_send_pdcp_data_ind);
}
} else {
pdcp_layer_init();
uint32_t pdcp_initmask = (IS_SOFTMODEM_NOS1) ?
(PDCP_USE_NETLINK_BIT | LINK_ENB_PDCP_TO_IP_DRIVER_BIT) : LINK_ENB_PDCP_TO_GTPV1U_BIT;
if (IS_SOFTMODEM_NOS1) {
printf("IS_SOFTMODEM_NOS1 option enabled \n");
pdcp_initmask = pdcp_initmask | ENB_NAS_USE_TUN_BIT | SOFTMODEM_NOKRNMOD_BIT;
}
nr_pdcp_module_init(pdcp_initmask, 0);
pdcp_set_rlc_data_req_func((send_rlc_data_req_func_t) rlc_data_req);
pdcp_set_pdcp_data_ind_func((pdcp_data_ind_func_t) pdcp_data_ind);
}
}
int main( int argc, char **argv ) {
int ru_id, CC_id = 0;
start_background_system();
///static configuration for NR at the moment
if ( load_configmodule(argc,argv,CONFIG_ENABLECMDLINEONLY) == NULL) {
exit_fun("[SOFTMODEM] Error, configuration module init failed\n");
}
set_softmodem_sighandler();
#ifdef DEBUG_CONSOLE
setvbuf(stdout, NULL, _IONBF, 0);
setvbuf(stderr, NULL, _IONBF, 0);
#endif
mode = normal_txrx;
memset(&openair0_cfg[0],0,sizeof(openair0_config_t)*MAX_CARDS);
memset(tx_max_power,0,sizeof(int)*MAX_NUM_CCs);
logInit();
set_latency_target();
printf("Reading in command-line options\n");
get_options ();
EPC_MODE_ENABLED = !IS_SOFTMODEM_NOS1;
if (CONFIG_ISFLAGSET(CONFIG_ABORT) ) {
fprintf(stderr,"Getting configuration failed\n");
exit(-1);
}
openair0_cfg[0].threequarter_fs = threequarter_fs;
AMF_MODE_ENABLED = get_softmodem_params()->sa;
NGAP_CONF_MODE = get_softmodem_params()->sa;
if (get_softmodem_params()->do_ra)
AssertFatal(get_softmodem_params()->phy_test == 0,"RA and phy_test are mutually exclusive\n");
if (get_softmodem_params()->sa)
AssertFatal(get_softmodem_params()->phy_test == 0,"Standalone mode and phy_test are mutually exclusive\n");
#if T_TRACER
T_Config_Init();
#endif
//randominit (0);
set_taus_seed (0);
printf("configuring for RAU/RRU\n");
if (opp_enabled ==1) {
reset_opp_meas();
}
cpuf=get_cpu_freq_GHz();
itti_init(TASK_MAX, tasks_info);
// initialize mscgen log after ITTI
MSC_INIT(MSC_E_UTRAN, ADDED_QUEUES_MAX+TASK_MAX);
init_opt();
if(PDCP_USE_NETLINK && !IS_SOFTMODEM_NOS1) {
netlink_init();
if (get_softmodem_params()->nsa) {
init_pdcp();
}
}
#ifndef PACKAGE_VERSION
# define PACKAGE_VERSION "UNKNOWN-EXPERIMENTAL"
#endif
LOG_I(HW, "Version: %s\n", PACKAGE_VERSION);
if (RC.nb_nr_L1_inst > 0)
RCconfig_NR_L1();
// don't create if node doesn't connect to RRC/S1/GTP
int ret=create_gNB_tasks(1);
AssertFatal(ret==0,"cannot create ITTI tasks\n");
/* Start the agent. If it is turned off in the configuration, it won't start */
/*
RCconfig_nr_flexran();
for (i = 0; i < RC.nb_nr_L1_inst; i++) {
flexran_agent_start(i);
}
*/
// init UE_PF_PO and mutex lock
pthread_mutex_init(&ue_pf_po_mutex, NULL);
memset (&UE_PF_PO[0][0], 0, sizeof(UE_PF_PO_t)*NUMBER_OF_UE_MAX*MAX_NUM_CCs);
mlockall(MCL_CURRENT | MCL_FUTURE);
pthread_cond_init(&sync_cond,NULL);
pthread_mutex_init(&sync_mutex, NULL);
usleep(1000);
if (NFAPI_MODE) {
printf("NFAPI*** - mutex and cond created - will block shortly for completion of PNF connection\n");
pthread_cond_init(&sync_cond,NULL);
pthread_mutex_init(&sync_mutex, NULL);
}
const char *nfapi_mode_str = "<UNKNOWN>";
switch(NFAPI_MODE) {
case 0:
nfapi_mode_str = "MONOLITHIC";
break;
case 1:
nfapi_mode_str = "PNF";
break;
case 2:
nfapi_mode_str = "VNF";
break;
default:
nfapi_mode_str = "<UNKNOWN NFAPI MODE>";
break;
}
printf("NFAPI MODE:%s\n", nfapi_mode_str);
if (NFAPI_MODE==NFAPI_MODE_VNF)
wait_nfapi_init("main?");
printf("START MAIN THREADS\n");
// start the main threads
number_of_cards = 1;
printf("RC.nb_nr_L1_inst:%d\n", RC.nb_nr_L1_inst);
if (RC.nb_nr_L1_inst > 0) {
printf("Initializing gNB threads single_thread_flag:%d wait_for_sync:%d\n", single_thread_flag,wait_for_sync);
init_gNB(single_thread_flag,wait_for_sync);
}
printf("wait_gNBs()\n");
wait_gNBs();
printf("About to Init RU threads RC.nb_RU:%d\n", RC.nb_RU);
int sl_ahead=6;
if (RC.nb_RU >0) {
printf("Initializing RU threads\n");
init_NR_RU(get_softmodem_params()->rf_config_file);
for (ru_id=0; ru_id<RC.nb_RU; ru_id++) {
RC.ru[ru_id]->rf_map.card=0;
RC.ru[ru_id]->rf_map.chain=CC_id+chain_offset;
if (ru_id==0) sl_ahead = RC.ru[ru_id]->sf_ahead * RC.gNB[0]->frame_parms.slots_per_subframe;
else AssertFatal(RC.ru[ru_id]->sf_ahead != RC.ru[0]->sf_ahead,"RU %d has different sf_ahead %d than RU 0 %d\n",RC.ru[ru_id]->sf_ahead,RC.ru[0]->sf_ahead);
}
}
config_sync_var=0;
if (NFAPI_MODE==NFAPI_MODE_PNF) {
wait_nfapi_init("main?");
}
if (RC.nb_nr_L1_inst > 0) {
printf("wait RUs\n");
wait_RUs();
printf("ALL RUs READY!\n");
printf("RC.nb_RU:%d\n", RC.nb_RU);
// once all RUs are ready initialize the rest of the gNBs ((dependence on final RU parameters after configuration)
printf("ALL RUs ready - init gNBs\n");
for (int idx=0;idx<RC.nb_nr_L1_inst;idx++) RC.gNB[idx]->if_inst->sl_ahead = sl_ahead;
if(IS_SOFTMODEM_DOSCOPE) {
sleep(1);
scopeParms_t p;
p.argc=&argc;
p.argv=argv;
p.gNB=RC.gNB[0];
p.ru=RC.ru[0];
load_softscope("nr",&p);
}
if (NFAPI_MODE != NFAPI_MODE_PNF && NFAPI_MODE != NFAPI_MODE_VNF) {
printf("Not NFAPI mode - call init_eNB_afterRU()\n");
init_eNB_afterRU();
} else {
printf("NFAPI mode - DO NOT call init_gNB_afterRU()\n");
}
printf("ALL RUs ready - ALL gNBs ready\n");
// connect the TX/RX buffers
printf("Sending sync to all threads\n");
pthread_mutex_lock(&sync_mutex);
sync_var=0;
pthread_cond_broadcast(&sync_cond);
pthread_mutex_unlock(&sync_mutex);
}
printf("About to call end_configmodule() from %s() %s:%d\n", __FUNCTION__, __FILE__, __LINE__);
// We have to set PARAMFLAG_NOFREE on right paramters before re-enabling end_configmodule()
//end_configmodule();
printf("Called end_configmodule() from %s() %s:%d\n", __FUNCTION__, __FILE__, __LINE__);
// wait for end of program
printf("TYPE <CTRL-C> TO TERMINATE\n");
//getchar();
printf("Entering ITTI signals handler\n");
itti_wait_tasks_end();
printf("Returned from ITTI signal handler\n");
oai_exit=1;
printf("oai_exit=%d\n",oai_exit);
// stop threads
/*#ifdef XFORMS
printf("waiting for XFORMS thread\n");
if (do_forms==1) {
pthread_join(forms_thread,&status);
fl_hide_form(form_stats->stats_form);
fl_free_form(form_stats->stats_form);
fl_hide_form(form_stats_l2->stats_form);
fl_free_form(form_stats_l2->stats_form);
for(UE_id=0; UE_id<scope_enb_num_ue; UE_id++) {
for(CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
fl_hide_form(form_enb[CC_id][UE_id]->phy_scope_gNB);
fl_free_form(form_enb[CC_id][UE_id]->phy_scope_gNB);
}
}
}
#endif*/
printf("stopping MODEM threads\n");
// cleanup
stop_gNB(NB_gNB_INST);
if (RC.nb_nr_L1_inst > 0) {
stop_RU(NB_RU);
}
/* release memory used by the RU/gNB threads (incomplete), after all
* threads have been stopped (they partially use the same memory) */
for (int inst = 0; inst < NB_gNB_INST; inst++) {
//free_transport(RC.gNB[inst]);
phy_free_nr_gNB(RC.gNB[inst]);
}
for (int inst = 0; inst < NB_RU; inst++) {
nr_phy_free_RU(RC.ru[inst]);
}
free_lte_top();
pthread_cond_destroy(&sync_cond);
pthread_mutex_destroy(&sync_mutex);
pthread_cond_destroy(&nfapi_sync_cond);
pthread_mutex_destroy(&nfapi_sync_mutex);
pthread_mutex_destroy(&ue_pf_po_mutex);
// *** Handle per CC_id openair0
for(ru_id=0; ru_id<NB_RU; ru_id++) {
if (RC.ru[ru_id]->rfdevice.trx_end_func)
RC.ru[ru_id]->rfdevice.trx_end_func(&RC.ru[ru_id]->rfdevice);
if (RC.ru[ru_id]->ifdevice.trx_end_func)
RC.ru[ru_id]->ifdevice.trx_end_func(&RC.ru[ru_id]->ifdevice);
}
logClean();
printf("Bye.\n");
return 0;
}
Reference in New Issue View Git Blame Copy Permalink