134 lines
6.5 KiB
Plaintext
134 lines
6.5 KiB
Plaintext
MME :
|
|
{
|
|
REALM = "openairinterface.org"; # YOUR REALM HERE
|
|
INSTANCE = 1; # 0 is the default
|
|
PID_DIRECTORY = "/var/run"; # /var/run is the default
|
|
MAX_S1_ENB = 64;
|
|
MAX_UE = 4096;
|
|
RELATIVE_CAPACITY = 10;
|
|
EMERGENCY_ATTACH_SUPPORTED = "no";
|
|
UNAUTHENTICATED_IMSI_SUPPORTED = "no";
|
|
DUMMY_HANDOVER_FORWARDING_ENABLED = "yes";
|
|
EPS_NETWORK_FEATURE_SUPPORT_IMS_VOICE_OVER_PS_SESSION_IN_S1 = "no"; # DO NOT CHANGE
|
|
EPS_NETWORK_FEATURE_SUPPORT_EMERGENCY_BEARER_SERVICES_IN_S1_MODE = "no"; # DO NOT CHANGE
|
|
EPS_NETWORK_FEATURE_SUPPORT_LOCATION_SERVICES_VIA_EPC = "no"; # DO NOT CHANGE
|
|
EPS_NETWORK_FEATURE_SUPPORT_EXTENDED_SERVICE_REQUEST = "no"; # DO NOT CHANGE
|
|
|
|
# Display statistics about whole system (expressed in seconds)
|
|
MME_STATISTIC_TIMER = 10;
|
|
MME_MOBILITY_COMPLETION_TIMER = 2; # Amount of time in seconds the source MME waits to release resources after HANDOVER/TAU is complete (with or without.
|
|
MME_S10_HANDOVER_COMPLETION_TIMER = 2; # Amount of time in soconds the target MME waits to check if a handover/tau process has completed successfully.
|
|
|
|
IP_CAPABILITY = "IPV4V6";
|
|
INTERTASK_INTERFACE :
|
|
{
|
|
ITTI_QUEUE_SIZE = 2000000;
|
|
};
|
|
|
|
S6A :
|
|
{
|
|
S6A_CONF = "/openair-mme/etc/mme_fd.conf";
|
|
HSS_HOSTNAME = "hss.openairinterface.org"; # THE HSS FQDN ex: hss.epc.mnc001.mcc001.3gppnetwork.org
|
|
HSS_REALM = "openairinterface.org"; # THE HSS REALM ex: epc.mnc001.mcc001.3gppnetwork.org
|
|
};
|
|
|
|
SCTP :
|
|
{
|
|
SCTP_INSTREAMS = 8;
|
|
SCTP_OUTSTREAMS = 8;
|
|
};
|
|
|
|
S1AP :
|
|
{
|
|
S1AP_OUTCOME_TIMER = 10;
|
|
};
|
|
|
|
GUMMEI_LIST = (
|
|
{MCC="208" ; MNC="97"; MME_GID="32768" ; MME_CODE="3"; } # YOUR GUMMEI CONFIG HERE
|
|
);
|
|
|
|
TAI_LIST = (
|
|
{MCC="208" ; MNC="97"; TAC = "1"; }, # YOUR TAI CONFIG HERE
|
|
{MCC="208" ; MNC="97"; TAC = "2"; }, # YOUR TAI CONFIG HERE
|
|
{MCC="208" ; MNC="97"; TAC = "3"; } # YOUR TAI CONFIG HERE
|
|
);
|
|
|
|
NAS :
|
|
{
|
|
ORDERED_SUPPORTED_INTEGRITY_ALGORITHM_LIST = [ "EIA2" , "EIA1" , "EIA0" ];
|
|
ORDERED_SUPPORTED_CIPHERING_ALGORITHM_LIST = [ "EEA0" , "EEA1" , "EEA2" ];
|
|
T3402 = 12
|
|
T3412 = 0
|
|
T3422 = 6
|
|
T3450 = 6
|
|
T3460 = 6
|
|
T3470 = 6
|
|
T3485 = 3
|
|
T3486 = 3
|
|
T3489 = 4
|
|
T3495 = 3
|
|
NAS_FORCE_TAU = 0
|
|
STRICT_FILLER_BITS_CHECK = "yes";
|
|
};
|
|
|
|
NETWORK_INTERFACES :
|
|
{
|
|
# MME binded interface for S1-C or S1-MME communication (S1AP), can be ethernet interface, virtual ethernet interface, we don't advise wireless interfaces
|
|
MME_INTERFACE_NAME_FOR_S1_MME = "eth0"; # YOUR NETWORK CONFIG HERE
|
|
MME_IPV4_ADDRESS_FOR_S1_MME = "192.168.61.195/24"; # CIDR, YOUR NETWORK CONFIG HERE
|
|
# MME_IPV6_ADDRESS_FOR_S1_MME = "fd00::191/118"; # YOUR NETWORK CONFIG HERE
|
|
# MME binded interface for S11 communication (GTPV2-C)
|
|
MME_INTERFACE_NAME_FOR_S11 = "eth0"; # YOUR NETWORK CONFIG HERE
|
|
MME_IPV4_ADDRESS_FOR_S11 = "192.168.61.195/24"; # CIDR, YOUR NETWORK CONFIG HERE
|
|
# MME_IPV6_ADDRESS_FOR_S11 = "fd00:0:0:4::191/64";
|
|
MME_PORT_FOR_S11 = 2123; # YOUR NETWORK CONFIG HERE
|
|
|
|
|
|
#S10 Interface
|
|
MME_INTERFACE_NAME_FOR_S10 = "lo"; # YOUR NETWORK CONFIG HERE
|
|
MME_IPV4_ADDRESS_FOR_S10 = "127.0.0.10/24"; # CIDR, YOUR NETWORK CONFIG HERE
|
|
# MME_IPV6_ADDRESS_FOR_S10 = "fd00:0:0:4::191/64";
|
|
MME_PORT_FOR_S10 = 2123; # YOUR NETWORK CONFIG HERE
|
|
};
|
|
|
|
LOGGING :
|
|
{
|
|
# OUTPUT choice in { "CONSOLE", `path to file`", "`IPv4@`:`TCP port num`"}
|
|
# `path to file` must start with '.' or '/'
|
|
# if TCP stream choice, then you can easily dump the traffic on the remote or local host: nc -l `TCP port num` > received.txt
|
|
OUTPUT = "CONSOLE";
|
|
THREAD_SAFE = "no"; # THREAD_SAFE choice in { "yes", "no" }, safe to let 'no'
|
|
COLOR = "yes"; # COLOR choice in { "yes", "no" } means use of ANSI styling codes or no
|
|
# Log level choice in { "EMERGENCY", "ALERT", "CRITICAL", "ERROR", "WARNING", "NOTICE", "INFO", "DEBUG", "TRACE"}
|
|
SCTP_LOG_LEVEL = "TRACE";
|
|
S10_LOG_LEVEL = "TRACE";
|
|
S11_LOG_LEVEL = "TRACE";
|
|
# NEW LOGS FOR MCE
|
|
SM_LOG_LEVEL = "TRACE";
|
|
MCE_APP_LOG_LEVEL = "TRACE";
|
|
M2AP_LOG_LEVEL = "TRACE";
|
|
GTPV2C_LOG_LEVEL = "TRACE";
|
|
UDP_LOG_LEVEL = "DEBUG";
|
|
S1AP_LOG_LEVEL = "DEBUG";
|
|
NAS_LOG_LEVEL = "TRACE";
|
|
MME_APP_LOG_LEVEL = "TRACE";
|
|
S6A_LOG_LEVEL = "TRACE";
|
|
UTIL_LOG_LEVEL = "ERROR";
|
|
MSC_LOG_LEVEL = "ERROR";
|
|
ITTI_LOG_LEVEL = "ERROR";
|
|
ASN1_VERBOSITY = "annoying";
|
|
};
|
|
|
|
|
|
# WRR_LIST_SELECTION = (
|
|
# {ID="tac-lb03.tac-hb00.tac.epc.mnc001.mcc001.3gppnetwork.org" ; SGW_IP_ADDRESS_FOR_S11="192.168.61.196";},
|
|
# {ID="tac-lb01.tac-hb00.tac.epc.mnc097.mcc208.3gppnetwork.org" ; SGW_IP_ADDRESS_FOR_S11="192.168.61.196";},
|
|
# {ID="tac-lb02.tac-hb00.tac.epc.mnc097.mcc208.3gppnetwork.org" ; MME_IP_ADDRESS_FOR_S10="0.0.0.0";},
|
|
# {ID="tac-lb03.tac-hb00.tac.epc.mnc097.mcc208.3gppnetwork.org" ; MME_IP_ADDRESS_FOR_S10="0.0.0.0";}
|
|
# );
|
|
WRR_LIST_SELECTION = (
|
|
{ID="tac-lb01.tac-hb00.tac.epc.mnc097.mcc208.3gppnetwork.org" ; SGW_IP_ADDRESS_FOR_S11="192.168.61.196";}
|
|
);
|
|
};
|
|
|