This assert and assumption is incorrect, according to 38.101-1 UE channel is defined only by the BWP size
and BWP size can be any value supported by the RRC parameters defining the BWP.
To determine the UE channel the smallest bandwidth supporting the BWP is selected. This is an assumption based
on references in the same document to UE channel bandwidth being equal to one of the values in set
{5, 10, 15, 20, 25, 30, 35, 40, 50, 60, 70, 80, 90, 100}.
Also:
- calculated P_CMIN during BWP setup since the parameter doesn't depend on DCI.
- initiialize uniqCfg structure in test_nr_ue_power_procedures main function which enables LOG prints during tests
913 lines
30 KiB
C
913 lines
30 KiB
C
/*
|
|
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
|
|
* contributor license agreements. See the NOTICE file distributed with
|
|
* this work for additional information regarding copyright ownership.
|
|
* The OpenAirInterface Software Alliance licenses this file to You under
|
|
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
|
|
* except in compliance with the License.
|
|
* You may obtain a copy of the License at
|
|
*
|
|
* http://www.openairinterface.org/?page_id=698
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*-------------------------------------------------------------------------------
|
|
* For more information about the OpenAirInterface (OAI) Software Alliance:
|
|
* contact@openairinterface.org
|
|
*/
|
|
|
|
#include <string.h>
|
|
#include <math.h>
|
|
#include <unistd.h>
|
|
#include <fcntl.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/mman.h>
|
|
#include "common/config/config_userapi.h"
|
|
#include "common/utils/LOG/log.h"
|
|
#include "common/utils/load_module_shlib.h"
|
|
#include "common/ran_context.h"
|
|
#include "common/utils/nr/nr_common.h"
|
|
#include "PHY/types.h"
|
|
#include "PHY/defs_nr_common.h"
|
|
#include "PHY/defs_nr_UE.h"
|
|
#include "PHY/defs_gNB.h"
|
|
#include "PHY/NR_REFSIG/refsig_defs_ue.h"
|
|
#include "PHY/MODULATION/modulation_eNB.h"
|
|
#include "PHY/MODULATION/modulation_UE.h"
|
|
#include "PHY/MODULATION/nr_modulation.h"
|
|
#include "PHY/INIT/nr_phy_init.h"
|
|
#include "PHY/NR_TRANSPORT/nr_transport_proto.h"
|
|
#include "PHY/NR_UE_TRANSPORT/nr_transport_proto_ue.h"
|
|
#include "PHY/NR_UE_ESTIMATION/nr_estimation.h"
|
|
#include "PHY/phy_vars.h"
|
|
#include "SCHED_NR/sched_nr.h"
|
|
#include "openair1/SIMULATION/TOOLS/sim.h"
|
|
#include "openair1/SIMULATION/RF/rf.h"
|
|
#include "openair1/SIMULATION/NR_PHY/nr_unitary_defs.h"
|
|
#include "openair1/PHY/MODULATION/nr_modulation.h"
|
|
#include <executables/softmodem-common.h>
|
|
#include <executables/nr-uesoftmodem.h>
|
|
#include "nfapi/oai_integration/vendor_ext.h"
|
|
//#define DEBUG_NR_PBCHSIM
|
|
|
|
PHY_VARS_gNB *gNB;
|
|
PHY_VARS_NR_UE *UE;
|
|
RAN_CONTEXT_t RC;
|
|
int32_t uplink_frequency_offset[MAX_NUM_CCs][4];
|
|
|
|
double cpuf;
|
|
//uint8_t nfapi_mode = 0;
|
|
const int NB_UE_INST = 1;
|
|
|
|
// needed for some functions
|
|
openair0_config_t openair0_cfg[MAX_CARDS];
|
|
|
|
uint8_t const nr_rv_round_map[4] = {0, 2, 3, 1};
|
|
|
|
void inc_ref_sched_response(int _)
|
|
{
|
|
LOG_E(PHY, "fatal\n");
|
|
exit(1);
|
|
}
|
|
void deref_sched_response(int _)
|
|
{
|
|
LOG_E(PHY, "fatal\n");
|
|
exit(1);
|
|
}
|
|
|
|
uint64_t get_softmodem_optmask(void) {return 0;}
|
|
static softmodem_params_t softmodem_params;
|
|
softmodem_params_t *get_softmodem_params(void) {
|
|
return &softmodem_params;
|
|
}
|
|
|
|
nrUE_params_t nrUE_params={0};
|
|
|
|
nrUE_params_t *get_nrUE_params(void) {
|
|
return &nrUE_params;
|
|
}
|
|
|
|
void init_downlink_harq_status(NR_DL_UE_HARQ_t *dl_harq) {}
|
|
NR_IF_Module_t *NR_IF_Module_init(int Mod_id) { return (NULL); }
|
|
nfapi_mode_t nfapi_getmode(void) { return NFAPI_MODE_UNKNOWN; }
|
|
|
|
void nr_fill_dl_indication(nr_downlink_indication_t *dl_ind,
|
|
fapi_nr_dci_indication_t *dci_ind,
|
|
fapi_nr_rx_indication_t *rx_ind,
|
|
const UE_nr_rxtx_proc_t *proc,
|
|
PHY_VARS_NR_UE *ue,
|
|
void *phy_data)
|
|
{
|
|
}
|
|
void nr_fill_rx_indication(fapi_nr_rx_indication_t *rx_ind,
|
|
uint8_t pdu_type,
|
|
PHY_VARS_NR_UE *ue,
|
|
NR_UE_DLSCH_t *dlsch0,
|
|
NR_UE_DLSCH_t *dlsch1,
|
|
uint16_t n_pdus,
|
|
const UE_nr_rxtx_proc_t *proc,
|
|
void *typeSpecific,
|
|
uint8_t *b)
|
|
{
|
|
}
|
|
|
|
int nr_ue_pdcch_procedures(PHY_VARS_NR_UE *ue,
|
|
const UE_nr_rxtx_proc_t *proc,
|
|
int32_t pdcch_est_size,
|
|
c16_t pdcch_dl_ch_estimates[][pdcch_est_size],
|
|
nr_phy_data_t *phy_data,
|
|
int n_ss,
|
|
c16_t rxdataF[][ue->frame_parms.samples_per_slot_wCP])
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
void nr_phy_config_request_sim_pbchsim(PHY_VARS_gNB *gNB,
|
|
int N_RB_DL,
|
|
int N_RB_UL,
|
|
int mu,
|
|
int Nid_cell,
|
|
uint64_t position_in_burst)
|
|
{
|
|
NR_DL_FRAME_PARMS *fp = &gNB->frame_parms;
|
|
nfapi_nr_config_request_scf_t *gNB_config = &gNB->gNB_config;
|
|
//overwrite for new NR parameters
|
|
|
|
uint64_t rev_burst=0;
|
|
for (int i=0; i<64; i++)
|
|
rev_burst |= (((position_in_burst>>(63-i))&0x01)<<i);
|
|
|
|
gNB_config->cell_config.phy_cell_id.value = Nid_cell;
|
|
gNB_config->ssb_config.scs_common.value = mu;
|
|
gNB_config->ssb_table.ssb_subcarrier_offset.value = 0;
|
|
gNB_config->ssb_table.ssb_offset_point_a.value = (N_RB_DL-20)>>1;
|
|
gNB_config->ssb_table.ssb_mask_list[1].ssb_mask.value = (rev_burst)&(0xFFFFFFFF);
|
|
gNB_config->ssb_table.ssb_mask_list[0].ssb_mask.value = (rev_burst>>32)&(0xFFFFFFFF);
|
|
gNB_config->cell_config.frame_duplex_type.value = TDD;
|
|
gNB_config->ssb_table.ssb_period.value = 1; //10ms
|
|
gNB_config->carrier_config.dl_grid_size[mu].value = N_RB_DL;
|
|
gNB_config->carrier_config.ul_grid_size[mu].value = N_RB_UL;
|
|
gNB_config->carrier_config.num_tx_ant.value = fp->nb_antennas_tx;
|
|
gNB_config->carrier_config.num_rx_ant.value = fp->nb_antennas_rx;
|
|
|
|
gNB_config->tdd_table.tdd_period.value = 0;
|
|
//gNB_config->subframe_config.dl_cyclic_prefix_type.value = (fp->Ncp == NORMAL) ? NFAPI_CP_NORMAL : NFAPI_CP_EXTENDED;
|
|
|
|
fp->dl_CarrierFreq = 3600000000;//from_nrarfcn(gNB_config->nfapi_config.rf_bands.rf_band[0],gNB_config->nfapi_config.nrarfcn.value);
|
|
fp->ul_CarrierFreq = 3600000000;//fp->dl_CarrierFreq - (get_uldl_offset(gNB_config->nfapi_config.rf_bands.rf_band[0])*100000);
|
|
if (mu>2) fp->nr_band = 257;
|
|
else fp->nr_band = 78;
|
|
fp->threequarter_fs= 0;
|
|
frequency_range_t frequency_range = fp->nr_band > 256 ? FR2 : FR1;
|
|
int bw_index = get_supported_band_index(mu, frequency_range, N_RB_DL);
|
|
gNB_config->carrier_config.dl_bandwidth.value = get_supported_bw_mhz(frequency_range, bw_index);
|
|
|
|
fp->ofdm_offset_divisor = UINT_MAX;
|
|
nr_init_frame_parms(gNB_config, fp);
|
|
init_timeshift_rotation(fp);
|
|
|
|
init_symbol_rotation(fp);
|
|
|
|
gNB->configured = 1;
|
|
LOG_I(PHY,"gNB configured\n");
|
|
}
|
|
configmodule_interface_t *uniqCfg = NULL;
|
|
int main(int argc, char **argv)
|
|
{
|
|
char c;
|
|
int i,aa,start_symbol;
|
|
double sigma2, sigma2_dB=10,SNR,snr0=-2.0,snr1=2.0;
|
|
double cfo=0;
|
|
uint8_t snr1set=0;
|
|
c16_t **txdata;
|
|
double **s_re,**s_im,**r_re,**r_im;
|
|
//double iqim = 0.0;
|
|
double ip =0.0;
|
|
//unsigned char pbch_pdu[6];
|
|
// int sync_pos, sync_pos_slot;
|
|
// FILE *rx_frame_file;
|
|
FILE *output_fd = NULL;
|
|
//uint8_t write_output_file=0;
|
|
//int result;
|
|
//int freq_offset;
|
|
// int subframe_offset;
|
|
// char fname[40], vname[40];
|
|
int trial,n_trials=1,n_errors=0,n_errors_payload=0;
|
|
uint8_t transmission_mode = 1,n_tx=1,n_rx=1;
|
|
uint16_t Nid_cell=0;
|
|
uint64_t SSB_positions=0x01;
|
|
int ssb_subcarrier_offset = 0;
|
|
int ssb_scan_threads = 0;
|
|
|
|
channel_desc_t *gNB2UE;
|
|
get_softmodem_params()->sa = 1;
|
|
|
|
//uint8_t extended_prefix_flag=0;
|
|
//int8_t interf1=-21,interf2=-21;
|
|
|
|
FILE *input_fd=NULL,*pbch_file_fd=NULL;
|
|
|
|
//uint32_t nsymb,tx_lev,tx_lev1 = 0,tx_lev2 = 0;
|
|
//char input_val_str[50],input_val_str2[50];
|
|
//uint8_t frame_mod4,num_pdcch_symbols = 0;
|
|
//double pbch_sinr;
|
|
//int pbch_tx_ant;
|
|
|
|
SCM_t channel_model=AWGN;//Rayleigh1_anticorr;
|
|
|
|
|
|
int N_RB_DL=273,mu=1;
|
|
|
|
//unsigned char frame_type = 0;
|
|
unsigned char pbch_phase = 0;
|
|
|
|
int frame=0;
|
|
int frame_length_complex_samples;
|
|
__attribute__((unused))
|
|
int frame_length_complex_samples_no_prefix;
|
|
NR_DL_FRAME_PARMS *frame_parms;
|
|
|
|
int ret, payload_ret=0;
|
|
int run_initial_sync=0;
|
|
|
|
int loglvl=OAILOG_WARNING;
|
|
|
|
float target_error_rate = 0.01;
|
|
|
|
int seed = 0;
|
|
|
|
cpuf = get_cpu_freq_GHz();
|
|
|
|
if ((uniqCfg = load_configmodule(argc, argv, CONFIG_ENABLECMDLINEONLY)) == 0) {
|
|
exit_fun("[NR_PBCHSIM] Error, configuration module init failed\n");
|
|
}
|
|
|
|
while ((c = getopt (argc, argv, "--:O:c:F:g:hIL:m:M:n:N:o:P:r:R:s:S:x:y:z:")) != -1) {
|
|
|
|
/* ignore long options starting with '--', option '-O' and their arguments that are handled by configmodule */
|
|
/* with this opstring getopt returns 1 for non-option arguments, refer to 'man 3 getopt' */
|
|
if (c == 1 || c == '-' || c == 'O')
|
|
continue;
|
|
|
|
printf("handling optarg %c\n",c);
|
|
switch (c) {
|
|
|
|
case 'c':
|
|
ssb_subcarrier_offset = atoi(optarg);
|
|
break;
|
|
|
|
/*case 'f':
|
|
write_output_file=1;
|
|
output_fd = fopen(optarg,"w");
|
|
|
|
if (output_fd==NULL) {
|
|
printf("Error opening %s\n",optarg);
|
|
exit(-1);
|
|
}
|
|
|
|
break;*/
|
|
|
|
/*case 'd':
|
|
frame_type = 1;
|
|
break;*/
|
|
|
|
case 'F':
|
|
input_fd = fopen(optarg,"r");
|
|
if (input_fd==NULL) {
|
|
printf("Problem with filename %s. Exiting.\n", optarg);
|
|
exit(-1);
|
|
}
|
|
break;
|
|
|
|
case 'g':
|
|
switch((char)*optarg) {
|
|
case 'A':
|
|
channel_model=SCM_A;
|
|
break;
|
|
|
|
case 'B':
|
|
channel_model=SCM_B;
|
|
break;
|
|
|
|
case 'C':
|
|
channel_model=SCM_C;
|
|
break;
|
|
|
|
case 'D':
|
|
channel_model=SCM_D;
|
|
break;
|
|
|
|
case 'E':
|
|
channel_model=EPA;
|
|
break;
|
|
|
|
case 'F':
|
|
channel_model=EVA;
|
|
break;
|
|
|
|
case 'G':
|
|
channel_model=ETU;
|
|
break;
|
|
|
|
default:
|
|
printf("Unsupported channel model! Exiting.\n");
|
|
exit(-1);
|
|
}
|
|
|
|
break;
|
|
|
|
/*
|
|
case 'i':
|
|
interf1=atoi(optarg);
|
|
break;
|
|
*/
|
|
|
|
case 'I':
|
|
run_initial_sync=1;
|
|
target_error_rate=0.1;
|
|
break;
|
|
|
|
/*
|
|
case 'j':
|
|
interf2=atoi(optarg);
|
|
break;*/
|
|
|
|
case 'L':
|
|
loglvl = atoi(optarg);
|
|
break;
|
|
|
|
case 'm':
|
|
mu = atoi(optarg);
|
|
break;
|
|
|
|
case 'M':
|
|
SSB_positions = atoi(optarg);
|
|
break;
|
|
|
|
case 'n':
|
|
n_trials = atoi(optarg);
|
|
break;
|
|
|
|
case 'N':
|
|
Nid_cell = atoi(optarg);
|
|
break;
|
|
|
|
case 'o':
|
|
cfo = atof(optarg);
|
|
#ifdef DEBUG_NR_PBCHSIM
|
|
printf("Setting CFO to %f Hz\n",cfo);
|
|
#endif
|
|
break;
|
|
|
|
/*case 'p':
|
|
extended_prefix_flag=1;
|
|
break;*/
|
|
|
|
case 'P':
|
|
pbch_phase = atoi(optarg);
|
|
if (pbch_phase>3)
|
|
printf("Illegal PBCH phase (0-3) got %d\n",pbch_phase);
|
|
break;
|
|
|
|
/*
|
|
case 'r':
|
|
ricean_factor = pow(10,-.1*atof(optarg));
|
|
if (ricean_factor>1) {
|
|
printf("Ricean factor must be between 0 and 1\n");
|
|
exit(-1);
|
|
}
|
|
break;
|
|
*/
|
|
|
|
case 'r':
|
|
seed = atoi(optarg);
|
|
break;
|
|
|
|
case 'R':
|
|
N_RB_DL = atoi(optarg);
|
|
break;
|
|
|
|
case 's':
|
|
snr0 = atof(optarg);
|
|
#ifdef DEBUG_NR_PBCHSIM
|
|
printf("Setting SNR0 to %f\n",snr0);
|
|
#endif
|
|
break;
|
|
|
|
case 'S':
|
|
snr1 = atof(optarg);
|
|
snr1set=1;
|
|
#ifdef DEBUG_NR_PBCHSIM
|
|
printf("Setting SNR1 to %f\n",snr1);
|
|
#endif
|
|
break;
|
|
|
|
/*
|
|
case 't':
|
|
Td= atof(optarg);
|
|
break;
|
|
*/
|
|
|
|
case 'x':
|
|
transmission_mode=atoi(optarg);
|
|
|
|
if ((transmission_mode!=1) && (transmission_mode!=2) && (transmission_mode!=6)) {
|
|
printf("Unsupported transmission mode %d. Exiting.\n",transmission_mode);
|
|
exit(-1);
|
|
}
|
|
|
|
break;
|
|
|
|
case 'y':
|
|
n_tx=atoi(optarg);
|
|
if ((n_tx==0) || (n_tx>2)) {
|
|
printf("Unsupported number of TX antennas %d. Exiting.\n", n_tx);
|
|
exit(-1);
|
|
}
|
|
break;
|
|
|
|
case 'z':
|
|
n_rx=atoi(optarg);
|
|
if ((n_rx==0) || (n_rx>2)) {
|
|
printf("Unsupported number of RX antennas %d. Exiting.\n", n_rx);
|
|
exit(-1);
|
|
}
|
|
break;
|
|
|
|
default:
|
|
case 'h':
|
|
printf("%s -F input_filename -g channel_mod -h(elp) -I(nitial sync) -L log_lvl -n n_frames -M SSBs -n frames -N cell_id -o FO -P phase -r seed -R RBs -s snr0 -S snr1 -x transmission_mode -y TXant -z RXant\n",
|
|
argv[0]);
|
|
//printf("-A Interpolation_filname Run with Abstraction to generate Scatter plot using interpolation polynomial in file\n");
|
|
printf("-c SSB subcarrier offset\n");
|
|
//printf("-C Generate Calibration information for Abstraction (effective SNR adjustment to remove Pe bias w.r.t. AWGN)\n");
|
|
//printf("-d Use TDD\n");
|
|
//printf("-f Output filename (.txt format) for Pe/SNR results\n");
|
|
printf("-F Input filename (.txt format) for RX conformance testing\n");
|
|
printf("-g [A,B,C,D,E,F,G] Use 3GPP SCM (A,B,C,D) or 36-101 (E-EPA,F-EVA,G-ETU) models (ignores delay spread and Ricean factor)\n");
|
|
printf("-h This message\n");
|
|
//printf("-i Relative strength of first intefering eNB (in dB) - cell_id mod 3 = 1\n");
|
|
printf("-I run initial sync with target error rate 0.1\n");
|
|
//printf("-j Relative strength of second intefering eNB (in dB) - cell_id mod 3 = 2\n");
|
|
printf("-L set the log level (-1 disable, 0 error, 1 warning, 2 info, 3 debug, 4 trace)\n");
|
|
printf("-m Numerology index\n");
|
|
printf("-M Multiple SSB positions in burst\n");
|
|
printf("-n Number of frames to simulate\n");
|
|
printf("-N Nid_cell\n");
|
|
printf("-o Carrier frequency offset in Hz\n");
|
|
//printf("-O oversampling factor (1,2,4,8,16)\n");
|
|
//printf("-p Use extended prefix mode\n");
|
|
printf("-P PBCH phase, allowed values 0-3\n");
|
|
printf("-r set the random number generator seed (default: 0 = current time)\n");
|
|
printf("-R N_RB_DL\n");
|
|
printf("-s Starting SNR, runs from SNR0 to SNR0 + 10 dB if not -S given. If -n 1, then just SNR is simulated\n");
|
|
printf("-S Ending SNR, runs from SNR0 to SNR1\n");
|
|
//printf("-t Delay spread for multipath channel\n");
|
|
printf("-x Transmission mode (1,2,6 for the moment)\n");
|
|
printf("-y Number of TX antennas used in eNB\n");
|
|
printf("-z Number of RX antennas used in UE\n");
|
|
exit (-1);
|
|
break;
|
|
}
|
|
}
|
|
|
|
randominit(seed);
|
|
|
|
logInit();
|
|
set_glog(loglvl);
|
|
|
|
if (snr1set==0)
|
|
snr1 = snr0+10;
|
|
|
|
printf("Initializing gNodeB for mu %d, N_RB_DL %d\n",mu,N_RB_DL);
|
|
|
|
|
|
RC.gNB = (PHY_VARS_gNB**) malloc(sizeof(PHY_VARS_gNB *));
|
|
RC.gNB[0] = malloc16_clear(sizeof(*(RC.gNB[0])));
|
|
gNB = RC.gNB[0];
|
|
gNB->ofdm_offset_divisor = UINT_MAX;
|
|
frame_parms = &gNB->frame_parms; //to be initialized I suppose (maybe not necessary for PBCH)
|
|
frame_parms->nb_antennas_tx = n_tx;
|
|
frame_parms->nb_antennas_rx = n_rx;
|
|
frame_parms->nb_antenna_ports_gNB = n_tx;
|
|
frame_parms->N_RB_DL = N_RB_DL;
|
|
frame_parms->Nid_cell = Nid_cell;
|
|
frame_parms->ssb_type = nr_ssb_type_C;
|
|
frame_parms->freq_range = mu<2 ? FR1 : FR2;
|
|
|
|
nr_phy_config_request_sim_pbchsim(gNB,N_RB_DL,N_RB_DL,mu,Nid_cell,SSB_positions);
|
|
gNB->gNB_config.tdd_table.tdd_period.value = 6;
|
|
set_tdd_config_nr(&gNB->gNB_config, mu, 7, 6, 2, 4);
|
|
phy_init_nr_gNB(gNB);
|
|
frame_parms->ssb_start_subcarrier = 12 * gNB->gNB_config.ssb_table.ssb_offset_point_a.value + ssb_subcarrier_offset;
|
|
initFloatingCoresTpool(ssb_scan_threads, &nrUE_params.Tpool, false, "UE-tpool");
|
|
|
|
int n_hf = 0;
|
|
int cyclic_prefix_type = NFAPI_CP_NORMAL;
|
|
|
|
double fs=0, eps;
|
|
double scs = 30000;
|
|
double bw = 100e6;
|
|
|
|
switch (mu) {
|
|
case 1:
|
|
scs = 30000;
|
|
frame_parms->Lmax = 8;
|
|
if (N_RB_DL == 217) {
|
|
fs = 122.88e6;
|
|
bw = 80e6;
|
|
}
|
|
else if (N_RB_DL == 245) {
|
|
fs = 122.88e6;
|
|
bw = 90e6;
|
|
}
|
|
else if (N_RB_DL == 273) {
|
|
fs = 122.88e6;
|
|
bw = 100e6;
|
|
}
|
|
else if (N_RB_DL == 106) {
|
|
fs = 61.44e6;
|
|
bw = 40e6;
|
|
}
|
|
else AssertFatal(1==0,"Unsupported numerology for mu %d, N_RB %d\n",mu, N_RB_DL);
|
|
break;
|
|
case 3:
|
|
frame_parms->Lmax = 64;
|
|
scs = 120000;
|
|
if (N_RB_DL == 66) {
|
|
fs = 122.88e6;
|
|
bw = 100e6;
|
|
}
|
|
else AssertFatal(1==0,"Unsupported numerology for mu %d, N_RB %d\n",mu, N_RB_DL);
|
|
break;
|
|
}
|
|
|
|
// cfo with respect to sub-carrier spacing
|
|
eps = cfo/scs;
|
|
|
|
// computation of integer and fractional FO to compare with estimation results
|
|
int IFO;
|
|
if(eps!=0.0){
|
|
printf("Introducing a CFO of %lf relative to SCS of %d kHz\n",eps,(int)(scs/1000));
|
|
if (eps>0)
|
|
IFO=(int)(eps+0.5);
|
|
else
|
|
IFO=(int)(eps-0.5);
|
|
printf("FFO = %lf; IFO = %d\n",eps-IFO,IFO);
|
|
}
|
|
|
|
gNB2UE = new_channel_desc_scm(n_tx,
|
|
n_rx,
|
|
channel_model,
|
|
fs,
|
|
0,
|
|
bw,
|
|
300e-9,
|
|
0.0,
|
|
CORR_LEVEL_LOW,
|
|
0,
|
|
0,
|
|
0,
|
|
0);
|
|
|
|
if (gNB2UE==NULL) {
|
|
printf("Problem generating channel model. Exiting.\n");
|
|
exit(-1);
|
|
}
|
|
|
|
frame_length_complex_samples = frame_parms->samples_per_subframe*NR_NUMBER_OF_SUBFRAMES_PER_FRAME;
|
|
frame_length_complex_samples_no_prefix = frame_parms->samples_per_subframe_wCP;
|
|
|
|
s_re = malloc(2*sizeof(double*));
|
|
s_im = malloc(2*sizeof(double*));
|
|
r_re = malloc(2*sizeof(double*));
|
|
r_im = malloc(2*sizeof(double*));
|
|
txdata = calloc(2, sizeof(c16_t*));
|
|
|
|
for (i=0; i<2; i++) {
|
|
|
|
|
|
s_re[i] = malloc16_clear(frame_length_complex_samples*sizeof(double));
|
|
s_im[i] = malloc16_clear(frame_length_complex_samples*sizeof(double));
|
|
r_re[i] = malloc16_clear(frame_length_complex_samples*sizeof(double));
|
|
r_im[i] = malloc16_clear(frame_length_complex_samples*sizeof(double));
|
|
printf("Allocating %d samples for txdata\n",frame_length_complex_samples);
|
|
txdata[i] = malloc16_clear(frame_length_complex_samples * sizeof(c16_t));
|
|
}
|
|
|
|
if (pbch_file_fd!=NULL) {
|
|
load_pbch_desc(pbch_file_fd);
|
|
}
|
|
|
|
|
|
//configure UE
|
|
|
|
UE = malloc16_clear(sizeof(*UE));
|
|
memcpy(&UE->frame_parms,frame_parms,sizeof(UE->frame_parms));
|
|
//phy_init_nr_top(UE); //called from init_nr_ue_signal
|
|
if (run_initial_sync==1) UE->is_synchronized = 0;
|
|
else UE->is_synchronized = 1;
|
|
|
|
if(eps!=0.0)
|
|
UE->UE_fo_compensation = 1; // if a frequency offset is set then perform fo estimation and compensation
|
|
|
|
if (init_nr_ue_signal(UE, 1) != 0) {
|
|
printf("Error at UE NR initialisation\n");
|
|
exit(-1);
|
|
}
|
|
|
|
nr_gold_pbch(UE->nr_gold_pbch, Nid_cell, frame_parms->Lmax);
|
|
|
|
processingData_L1tx_t msgDataTx;
|
|
// generate signal
|
|
const uint32_t rxdataF_sz = UE->frame_parms.samples_per_slot_wCP;
|
|
__attribute__ ((aligned(32))) c16_t rxdataF[UE->frame_parms.nb_antennas_rx][rxdataF_sz];
|
|
if (input_fd==NULL) {
|
|
|
|
for (i=0; i<frame_parms->Lmax; i++) {
|
|
if((SSB_positions >> i) & 0x01) {
|
|
|
|
const int sc_offset = frame_parms->freq_range == FR1 ? ssb_subcarrier_offset<<mu : ssb_subcarrier_offset;
|
|
const int prb_offset = frame_parms->freq_range == FR1 ? gNB->gNB_config.ssb_table.ssb_offset_point_a.value<<mu : gNB->gNB_config.ssb_table.ssb_offset_point_a.value << (mu - 2);
|
|
msgDataTx.ssb[i].ssb_pdu.ssb_pdu_rel15.bchPayload = 0x55dd33;
|
|
msgDataTx.ssb[i].ssb_pdu.ssb_pdu_rel15.SsbBlockIndex = i;
|
|
msgDataTx.ssb[i].ssb_pdu.ssb_pdu_rel15.SsbSubcarrierOffset = sc_offset;
|
|
msgDataTx.ssb[i].ssb_pdu.ssb_pdu_rel15.ssbOffsetPointA = prb_offset;
|
|
|
|
start_symbol = nr_get_ssb_start_symbol(frame_parms,i);
|
|
int slot = start_symbol/14;
|
|
|
|
for (aa=0; aa<gNB->frame_parms.nb_antennas_tx; aa++)
|
|
memset(gNB->common_vars.txdataF[aa],0,frame_parms->samples_per_slot_wCP*sizeof(int32_t));
|
|
|
|
nr_common_signal_procedures (gNB,frame,slot,msgDataTx.ssb[i].ssb_pdu);
|
|
|
|
for (aa=0; aa<gNB->frame_parms.nb_antennas_tx; aa++) {
|
|
if (cyclic_prefix_type == 1) {
|
|
apply_nr_rotation_TX(frame_parms,
|
|
gNB->common_vars.txdataF[aa],
|
|
frame_parms->symbol_rotation[0],
|
|
slot,
|
|
frame_parms->N_RB_DL,
|
|
0,
|
|
12);
|
|
|
|
PHY_ofdm_mod((int *)gNB->common_vars.txdataF[aa],
|
|
(int *)&txdata[aa][frame_parms->get_samples_slot_timestamp(slot,frame_parms,0)],
|
|
frame_parms->ofdm_symbol_size,
|
|
12,
|
|
frame_parms->nb_prefix_samples,
|
|
CYCLIC_PREFIX);
|
|
} else {
|
|
apply_nr_rotation_TX(frame_parms,
|
|
gNB->common_vars.txdataF[aa],
|
|
frame_parms->symbol_rotation[0],
|
|
slot,
|
|
frame_parms->N_RB_DL,
|
|
0,
|
|
14);
|
|
|
|
/*nr_normal_prefix_mod(gNB->common_vars.txdataF[aa],
|
|
&txdata[aa][frame_parms->get_samples_slot_timestamp(slot,frame_parms,0)],
|
|
14,
|
|
frame_parms);*/
|
|
|
|
PHY_ofdm_mod((int *)gNB->common_vars.txdataF[aa],
|
|
(int*)&txdata[aa][frame_parms->get_samples_slot_timestamp(slot,frame_parms,0)],
|
|
frame_parms->ofdm_symbol_size,
|
|
1,
|
|
frame_parms->nb_prefix_samples0,
|
|
CYCLIC_PREFIX);
|
|
|
|
PHY_ofdm_mod((int *)&gNB->common_vars.txdataF[aa][frame_parms->ofdm_symbol_size],
|
|
(int*)&txdata[aa][frame_parms->get_samples_slot_timestamp(slot,frame_parms,0)+frame_parms->nb_prefix_samples0+frame_parms->ofdm_symbol_size],
|
|
frame_parms->ofdm_symbol_size,
|
|
13,
|
|
frame_parms->nb_prefix_samples,
|
|
CYCLIC_PREFIX);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
LOG_M("txsigF0.m","txsF0", gNB->common_vars.txdataF[0],frame_length_complex_samples_no_prefix,1,1);
|
|
if (gNB->frame_parms.nb_antennas_tx>1)
|
|
LOG_M("txsigF1.m","txsF1", gNB->common_vars.txdataF[1],frame_length_complex_samples_no_prefix,1,1);
|
|
|
|
} else {
|
|
printf("Reading %d samples from file to antenna buffer %d\n",frame_length_complex_samples,0);
|
|
UE->UE_fo_compensation = 1; // perform fo compensation when samples from file are used
|
|
if (fread(txdata[0],
|
|
sizeof(int32_t),
|
|
frame_length_complex_samples,
|
|
input_fd) != frame_length_complex_samples) {
|
|
printf("error reading from file\n");
|
|
//exit(-1);
|
|
}
|
|
}
|
|
|
|
LOG_M("txsig0.m","txs0", txdata[0],frame_length_complex_samples,1,1);
|
|
if (gNB->frame_parms.nb_antennas_tx>1)
|
|
LOG_M("txsig1.m","txs1", txdata[1],frame_length_complex_samples,1,1);
|
|
|
|
if (output_fd)
|
|
fwrite(txdata[0],sizeof(int32_t),frame_length_complex_samples,output_fd);
|
|
|
|
/*int txlev = signal_energy(&txdata[0][5*frame_parms->ofdm_symbol_size + 4*frame_parms->nb_prefix_samples + frame_parms->nb_prefix_samples0],
|
|
frame_parms->ofdm_symbol_size + frame_parms->nb_prefix_samples);
|
|
printf("txlev %d (%f)\n",txlev,10*log10(txlev));*/
|
|
|
|
|
|
for (SNR=snr0; SNR<snr1; SNR+=.2) {
|
|
|
|
n_errors = 0;
|
|
n_errors_payload = 0;
|
|
|
|
for (trial=0; trial<n_trials; trial++) {
|
|
|
|
for (i=0; i<frame_length_complex_samples; i++) {
|
|
for (aa=0; aa<frame_parms->nb_antennas_tx; aa++) {
|
|
r_re[aa][i] = (double)txdata[aa][i].r;
|
|
r_im[aa][i] = (double)txdata[aa][i].i;
|
|
}
|
|
}
|
|
|
|
// multipath channel
|
|
//multipath_channel(gNB2UE,s_re,s_im,r_re,r_im,frame_length_complex_samples,0);
|
|
|
|
//AWGN
|
|
sigma2_dB = 20*log10((double)AMP/4)-SNR;
|
|
sigma2 = pow(10,sigma2_dB/10);
|
|
//printf("sigma2 %f (%f dB), tx_lev %f (%f dB)\n",sigma2,sigma2_dB,txlev,10*log10((double)txlev));
|
|
|
|
if(eps!=0.0)
|
|
rf_rx(r_re, // real part of txdata
|
|
r_im, // imag part of txdata
|
|
NULL, // interference real part
|
|
NULL, // interference imag part
|
|
0, // interference power
|
|
frame_parms->nb_antennas_rx, // number of rx antennas
|
|
frame_length_complex_samples, // number of samples in frame
|
|
1.0e9/fs, //sampling time (ns)
|
|
cfo, // frequency offset in Hz
|
|
0.0, // drift (not implemented)
|
|
0.0, // noise figure (not implemented)
|
|
0.0, // rx gain in dB ?
|
|
200, // 3rd order non-linearity in dB ?
|
|
&ip, // initial phase
|
|
30.0e3, // phase noise cutoff in kHz
|
|
-500.0, // phase noise amplitude in dBc
|
|
0.0, // IQ imbalance (dB),
|
|
0.0); // IQ phase imbalance (rad)
|
|
|
|
for (i=0; i<frame_length_complex_samples; i++) {
|
|
for (aa=0; aa<frame_parms->nb_antennas_rx; aa++) {
|
|
UE->common_vars.rxdata[aa][i].r = (short)(r_re[aa][i] + sqrt(sigma2 / 2) * gaussdouble(0.0, 1.0));
|
|
UE->common_vars.rxdata[aa][i].i = (short)(r_im[aa][i] + sqrt(sigma2 / 2) * gaussdouble(0.0, 1.0));
|
|
}
|
|
}
|
|
|
|
if (n_trials==1) {
|
|
LOG_M("rxsig0.m", "rxs0", UE->common_vars.rxdata[0], frame_parms->samples_per_frame, 1, 1);
|
|
if (gNB->frame_parms.nb_antennas_tx > 1)
|
|
LOG_M("rxsig1.m", "rxs1", UE->common_vars.rxdata[1], frame_parms->samples_per_frame, 1, 1);
|
|
}
|
|
if (UE->is_synchronized == 0) {
|
|
UE_nr_rxtx_proc_t proc = {0};
|
|
nr_gscn_info_t gscnInfo[MAX_GSCN_BAND] = {0};
|
|
const int numGscn = 1;
|
|
gscnInfo[0].ssbFirstSC = frame_parms->ssb_start_subcarrier;
|
|
nr_initial_sync_t ret = nr_initial_sync(&proc, UE, 1, 0, gscnInfo, numGscn);
|
|
printf("nr_initial_sync1 returns %s\n", ret.cell_detected ? "cell detected" : "cell not detected");
|
|
if (!ret.cell_detected)
|
|
n_errors++;
|
|
}
|
|
else {
|
|
UE_nr_rxtx_proc_t proc={0};
|
|
|
|
uint8_t ssb_index = 0;
|
|
const int estimateSz = frame_parms->symbols_per_slot * frame_parms->ofdm_symbol_size;
|
|
__attribute__((aligned(32))) struct complex16 dl_ch_estimates[frame_parms->nb_antennas_rx][estimateSz];
|
|
__attribute__((
|
|
aligned(32))) struct complex16 dl_ch_estimates_time[frame_parms->nb_antennas_rx][frame_parms->ofdm_symbol_size];
|
|
while (!((SSB_positions >> ssb_index) & 0x01))
|
|
ssb_index++; // to select the first transmitted ssb
|
|
UE->symbol_offset = nr_get_ssb_start_symbol(frame_parms, ssb_index);
|
|
|
|
int ssb_slot = (UE->symbol_offset/14)+(n_hf*(frame_parms->slots_per_frame>>1));
|
|
proc.nr_slot_rx = ssb_slot;
|
|
proc.gNB_id = 0;
|
|
for (int i = UE->symbol_offset + 1; i < UE->symbol_offset + 4; i++) {
|
|
nr_slot_fep(UE, frame_parms, &proc, i % frame_parms->symbols_per_slot, rxdataF, link_type_dl);
|
|
|
|
nr_pbch_channel_estimation(&UE->frame_parms,
|
|
&UE->SL_UE_PHY_PARAMS,
|
|
UE->nr_gold_pbch,
|
|
estimateSz,
|
|
dl_ch_estimates,
|
|
dl_ch_estimates_time,
|
|
&proc,
|
|
i % frame_parms->symbols_per_slot,
|
|
i - (UE->symbol_offset + 1),
|
|
ssb_index % 8,
|
|
n_hf,
|
|
frame_parms->ssb_start_subcarrier,
|
|
rxdataF,
|
|
false,
|
|
frame_parms->Nid_cell);
|
|
}
|
|
fapiPbch_t result;
|
|
int ret_ssb_idx;
|
|
int ret_symbol_offset;
|
|
ret = nr_rx_pbch(UE,
|
|
&proc,
|
|
true,
|
|
estimateSz,
|
|
dl_ch_estimates,
|
|
frame_parms,
|
|
ssb_index % 8,
|
|
frame_parms->ssb_start_subcarrier,
|
|
Nid_cell,
|
|
&result,
|
|
&n_hf,
|
|
&ret_ssb_idx,
|
|
&ret_symbol_offset,
|
|
frame_parms->samples_per_frame_wCP,
|
|
rxdataF);
|
|
|
|
if (ret == 0) {
|
|
// UE->rx_ind.rx_indication_body->mib_pdu.ssb_index; //not yet detected automatically
|
|
// UE->rx_ind.rx_indication_body->mib_pdu.ssb_length; //Lmax, not yet detected automatically
|
|
uint8_t gNB_xtra_byte = 0;
|
|
for (int i = 0; i < 8; i++)
|
|
gNB_xtra_byte |= ((gNB->pbch.pbch_a >> (31 - i)) & 1) << (7 - i);
|
|
|
|
payload_ret = (result.xtra_byte == gNB_xtra_byte);
|
|
for (i = 0; i < 3; i++) {
|
|
payload_ret +=
|
|
(result.decoded_output[i] == ((msgDataTx.ssb[ssb_index].ssb_pdu.ssb_pdu_rel15.bchPayload >> (8 * i)) & 0xff));
|
|
}
|
|
// printf("ret %d\n", payload_ret);
|
|
if (payload_ret != 4)
|
|
n_errors_payload++;
|
|
}
|
|
|
|
if (ret != 0)
|
|
n_errors++;
|
|
}
|
|
} //noise trials
|
|
printf("SNR %f: trials %d, n_errors_crc = %d, n_errors_payload %d\n", SNR,n_trials,n_errors,n_errors_payload);
|
|
|
|
if (((float)n_errors/(float)n_trials <= target_error_rate) && (n_errors_payload==0)) {
|
|
printf("PBCH test OK\n");
|
|
break;
|
|
}
|
|
|
|
if (n_trials==1)
|
|
break;
|
|
|
|
} // NSR
|
|
|
|
free_channel_desc_scm(gNB2UE);
|
|
|
|
int nb_slots_to_set = TDD_CONFIG_NB_FRAMES * (1 << mu) * NR_NUMBER_OF_SUBFRAMES_PER_FRAME;
|
|
for (int i = 0; i < nb_slots_to_set; ++i)
|
|
free(gNB->gNB_config.tdd_table.max_tdd_periodicity_list[i].max_num_of_symbol_per_slot_list);
|
|
free(gNB->gNB_config.tdd_table.max_tdd_periodicity_list);
|
|
|
|
phy_free_nr_gNB(gNB);
|
|
free(RC.gNB[0]);
|
|
free(RC.gNB);
|
|
|
|
term_nr_ue_signal(UE, 1);
|
|
free(UE);
|
|
|
|
for (i=0; i<2; i++) {
|
|
free(s_re[i]);
|
|
free(s_im[i]);
|
|
free(r_re[i]);
|
|
free(r_im[i]);
|
|
free(txdata[i]);
|
|
}
|
|
|
|
free(s_re);
|
|
free(s_im);
|
|
free(r_re);
|
|
free(r_im);
|
|
free(txdata);
|
|
|
|
if (output_fd)
|
|
fclose(output_fd);
|
|
|
|
if (input_fd)
|
|
fclose(input_fd);
|
|
|
|
loader_reset();
|
|
logTerm();
|
|
|
|
return(n_errors);
|
|
|
|
}
|