Robert Schmidt
740189c625
This reverts commit eaf28414ca.
This assertion was introduced as we (wrongfully) thought we needed to
calculate the SSB ARFCN at the CU. Since PBCH might carry one bit, which
is not available at the CU, only certain SSB ARFCNs would have been
possible.
With the availability of the SSB ARFCN through the
MeasurementTimingConfiguration, this is not necessary anymore.
248 lines
8.8 KiB
Plaintext
248 lines
8.8 KiB
Plaintext
Active_gNBs = ( "gNB-in-docker");
|
|
# Asn1_verbosity, choice in: none, info, annoying
|
|
Asn1_verbosity = "none";
|
|
|
|
gNBs =
|
|
(
|
|
{
|
|
////////// Identification parameters:
|
|
gNB_ID = 0xe00;
|
|
gNB_name = "gNB-in-docker";
|
|
|
|
// Tracking area code, 0x0000 and 0xfffe are reserved values
|
|
tracking_area_code = 1;
|
|
plmn_list = ({ mcc = 222; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1, sd = 0xffffff }) });
|
|
|
|
nr_cellid = 12345678L;
|
|
|
|
////////// Physical parameters:
|
|
|
|
|
|
servingCellConfigCommon = (
|
|
{
|
|
#spCellConfigCommon
|
|
|
|
physCellId = 0;
|
|
|
|
# downlinkConfigCommon
|
|
#frequencyInfoDL
|
|
# this is 3300.30 MHz + (19 PRBs + 10 SCs)@30kHz SCS (GSCN: 7715)
|
|
absoluteFrequencySSB = 620736;
|
|
dl_frequencyBand = 78;
|
|
# this is 3300.30 MHz
|
|
dl_absoluteFrequencyPointA = 620020;
|
|
#scs-SpecificCarrierList
|
|
dl_offstToCarrier = 0;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
dl_subcarrierSpacing = 1;
|
|
dl_carrierBandwidth = 51;
|
|
#initialDownlinkBWP
|
|
#genericParameters
|
|
# this is RBstart=27,L=48 (275*(L-1))+RBstart
|
|
initialDLBWPlocationAndBandwidth = 13750;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
initialDLBWPsubcarrierSpacing = 1;
|
|
#pdcch-ConfigCommon
|
|
initialDLBWPcontrolResourceSetZero = 12;
|
|
initialDLBWPsearchSpaceZero = 0;
|
|
|
|
#uplinkConfigCommon
|
|
#frequencyInfoUL
|
|
ul_frequencyBand = 78;
|
|
#scs-SpecificCarrierList
|
|
ul_offstToCarrier = 0;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
ul_subcarrierSpacing = 1;
|
|
ul_carrierBandwidth = 51;
|
|
pMax = 20;
|
|
#initialUplinkBWP
|
|
#genericParameters
|
|
initialULBWPlocationAndBandwidth = 13750;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
initialULBWPsubcarrierSpacing = 1;
|
|
#rach-ConfigCommon
|
|
#rach-ConfigGeneric
|
|
prach_ConfigurationIndex = 98;
|
|
#prach_msg1_FDM
|
|
#0 = one, 1=two, 2=four, 3=eight
|
|
prach_msg1_FDM = 0;
|
|
prach_msg1_FrequencyStart = 0;
|
|
zeroCorrelationZoneConfig = 13;
|
|
preambleReceivedTargetPower = -96;
|
|
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
|
|
preambleTransMax = 6;
|
|
#powerRampingStep
|
|
# 0=dB0,1=dB2,2=dB4,3=dB6
|
|
powerRampingStep = 1;
|
|
#ra_ReponseWindow
|
|
#1,2,4,8,10,20,40,80
|
|
ra_ResponseWindow = 4;
|
|
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
|
|
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
|
|
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
|
|
#oneHalf (0..15) 4,8,12,16,...60,64
|
|
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 14;
|
|
#ra_ContentionResolutionTimer
|
|
#(0..7) 8,16,24,32,40,48,56,64
|
|
ra_ContentionResolutionTimer = 7;
|
|
rsrp_ThresholdSSB = 19;
|
|
#prach-RootSequenceIndex_PR
|
|
#1 = 839, 2 = 139
|
|
prach_RootSequenceIndex_PR = 2;
|
|
prach_RootSequenceIndex = 1;
|
|
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
|
|
#
|
|
msg1_SubcarrierSpacing = 1,
|
|
# restrictedSetConfig
|
|
# 0=unrestricted, 1=restricted type A, 2=restricted type B
|
|
restrictedSetConfig = 0,
|
|
|
|
msg3_DeltaPreamble = 1;
|
|
p0_NominalWithGrant =-90;
|
|
|
|
# pucch-ConfigCommon setup :
|
|
# pucchGroupHopping
|
|
# 0 = neither, 1= group hopping, 2=sequence hopping
|
|
pucchGroupHopping = 0;
|
|
hoppingId = 40;
|
|
p0_nominal = -90;
|
|
# ssb_PositionsInBurs_BitmapPR
|
|
# 1=short, 2=medium, 3=long
|
|
ssb_PositionsInBurst_PR = 2;
|
|
ssb_PositionsInBurst_Bitmap = 1;
|
|
|
|
# ssb_periodicityServingCell
|
|
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
|
|
ssb_periodicityServingCell = 2;
|
|
|
|
# dmrs_TypeA_position
|
|
# 0 = pos2, 1 = pos3
|
|
dmrs_TypeA_Position = 0;
|
|
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
subcarrierSpacing = 1;
|
|
|
|
|
|
#tdd-UL-DL-ConfigurationCommon
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
referenceSubcarrierSpacing = 1;
|
|
# pattern1
|
|
# dl_UL_TransmissionPeriodicity
|
|
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
|
|
dl_UL_TransmissionPeriodicity = 6;
|
|
nrofDownlinkSlots = 7;
|
|
nrofDownlinkSymbols = 6;
|
|
nrofUplinkSlots = 2;
|
|
nrofUplinkSymbols = 4;
|
|
|
|
ssPBCH_BlockPower = -25;
|
|
}
|
|
|
|
);
|
|
|
|
# ------- SCTP definitions
|
|
SCTP :
|
|
{
|
|
# Number of streams to use in input/output
|
|
SCTP_INSTREAMS = 2;
|
|
SCTP_OUTSTREAMS = 2;
|
|
};
|
|
|
|
|
|
////////// AMF parameters:
|
|
amf_ip_address = ({ ipv4 = "172.21.16.137"; });
|
|
|
|
|
|
NETWORK_INTERFACES :
|
|
{
|
|
GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.68.194";
|
|
GNB_IPV4_ADDRESS_FOR_NGU = "192.168.68.194";
|
|
GNB_PORT_FOR_S1U = 2152; # Spec 2152
|
|
};
|
|
|
|
}
|
|
);
|
|
|
|
MACRLCs = (
|
|
{
|
|
num_cc = 1;
|
|
tr_s_preference = "local_L1";
|
|
tr_n_preference = "local_RRC";
|
|
pusch_TargetSNRx10 = 200;
|
|
pucch_TargetSNRx10 = 200;
|
|
ul_prbblack_SNR_threshold = 10;
|
|
}
|
|
);
|
|
|
|
L1s = (
|
|
{
|
|
num_cc = 1;
|
|
tr_n_preference = "local_mac";
|
|
prach_dtx_threshold = 120;
|
|
pucch0_dtx_threshold = 100;
|
|
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
|
|
}
|
|
);
|
|
|
|
RUs = (
|
|
{
|
|
local_rf = "yes"
|
|
nb_tx = 1
|
|
nb_rx = 1
|
|
att_tx = 14;
|
|
att_rx = 14;
|
|
bands = [78];
|
|
max_pdschReferenceSignalPower = -27;
|
|
max_rxgain = 114;
|
|
eNB_instances = [0];
|
|
#beamforming 1x4 matrix:
|
|
bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000];
|
|
clock_src = "internal";
|
|
}
|
|
);
|
|
|
|
THREAD_STRUCT = (
|
|
{
|
|
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
|
|
parallel_config = "PARALLEL_SINGLE_THREAD";
|
|
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
|
|
worker_config = "WORKER_ENABLE";
|
|
}
|
|
);
|
|
|
|
security = {
|
|
# preferred ciphering algorithms
|
|
# the first one of the list that an UE supports in chosen
|
|
# valid values: nea0, nea1, nea2, nea3
|
|
ciphering_algorithms = ( "nea0" );
|
|
|
|
# preferred integrity algorithms
|
|
# the first one of the list that an UE supports in chosen
|
|
# valid values: nia0, nia1, nia2, nia3
|
|
integrity_algorithms = ( "nia2", "nia0" );
|
|
|
|
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
|
|
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
|
|
drb_ciphering = "yes";
|
|
drb_integrity = "no";
|
|
};
|
|
|
|
log_config :
|
|
{
|
|
global_log_level ="info";
|
|
hw_log_level ="info";
|
|
phy_log_level ="info";
|
|
mac_log_level ="info";
|
|
rlc_log_level ="info";
|
|
pdcp_log_level ="info";
|
|
rrc_log_level ="info";
|
|
ngap_log_level ="debug";
|
|
f1ap_log_level ="debug";
|
|
};
|