maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
59feb72fca7748aa7ae2b1ba3af246eae9da8c8d
openairinterface5g/CMakeLists.txt
T
Robert Schmidt 3b7d6377a0 Link targets that need RRC ASN.1 headers to header-only library 
Most targets don't need the symbols from the compiled RRC ASN.1
libraries, but only the headers. In particular when compiling individual
libraries (e.g., for tests), linking the full library makes the RRC
ASN.1 libraries compile and link, when they are not needed (only headers
are needed).

For libraries that can do without these headers, don't link them.
2023-03-06 20:05:38 +01:00

2684 lines
100 KiB
CMake
Raw Blame History

#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
# Author: laurent THOMAS, Lionel GAUTHIER
cmake_minimum_required (VERSION 3.12)
project (OpenAirInterface LANGUAGES C CXX)
#########################################################
# Base directories, compatible with legacy OAI building #
#########################################################
set (OPENAIR_DIR ${CMAKE_SOURCE_DIR})
include("cmake_targets/macros.cmake")
# System packages that are required
# We use either the cmake buildin, in ubuntu are in: /usr/share/cmake*/Modules/
# or cmake provide a generic interface to pkg-config that widely used
###################################
include(FindPkgConfig)
pkg_search_module(LIBXML2 libxml-2.0 REQUIRED)
include_directories(${LIBXML2_INCLUDE_DIRS})
pkg_search_module(LIBXSLT libxslt REQUIRED)
include_directories(${LIBXSLT_INCLUDE_DIRS})
pkg_search_module(OPENSSL openssl REQUIRED)
include_directories(${OPENSSL_INCLUDE_DIRS})
pkg_search_module(CONFIG libconfig REQUIRED)
include_directories(${CONFIG_INCLUDE_DIRS})
pkg_search_module(CRYPTO libcrypto REQUIRED)
include_directories(${CRYPTO_INCLUDE_DIRS})
#uhd 4.0 and iris installs by default in /usr/local
include_directories("/usr/local/include/")
#use native cmake method as this package is not in pkg-config
add_list2_option(RF_BOARD "None" "RF head type" "None" "OAI_USRP" "OAI_BLADERF" "OAI_LMSSDR" "OAI_SIMU")
if (${RF_BOARD} STREQUAL "OAI_USRP")
find_package(Boost REQUIRED)
elseif (${RF_BOARD} STREQUAL "OAI_IRIS")
include_directories("radio/IRIS/USERSPACE/LIB/")
set(HW_SOURCE ${HW_SOURCE}
radio/IRIS/USERSPACE/LIB/iris_lib.cpp)
LINK_DIRECTORIES("/usr/local/lib")
set(option_HW_lib "-lSoapySDR -rdynamic -ldl")
elseif (${RF_BOARD} STREQUAL "OAI_AW2SORI")
include_directories("radio/AW2SORI")
set(HW_SOURCE ${HW_SOURCE}
${OPENAIR_DIR}/radio/AW2SORI/ARCH/AW2SORI/oaiori.c)
LINK_DIRECTORIES("/usr/local/lib")
set(openair_HW_lib "-shared -fPIC -msse4 -g -ggdb -lori")
endif (${RF_BOARD} STREQUAL "OAI_USRP")
pkg_search_module(OPENPGM openpgm-5.1 openpgm-5.2)
if(NOT ${OPENPGM_FOUND})
message("PACKAGE openpgm-5.1 is required by binaries such as oaisim: will fail later if this target is built")
else()
include_directories(${OPENPGM_INCLUDE_DIRS})
endif()
pkg_search_module(XPM xpm)
if(NOT ${XPM_FOUND})
message("PACKAGE xpm not found: some targets will fail")
else()
include_directories(${XPM_INCLUDE_DIRS})
endif()
# Atlas is required by some packages, but not found in pkg-config
# So, here are some hacks here. Hope this gets fixed in future!
if(EXISTS "/usr/include/atlas/cblas.h" OR EXISTS "/usr/include/cblas.h")
include_directories("/usr/include/atlas")
LINK_DIRECTORIES("/usr/lib/lapack")
LINK_DIRECTORIES("/usr/lib64")
LINK_DIRECTORIES("/usr/lib64/atlas") #Added because atlas libraries in CentOS 7 are here!
if(EXISTS "/usr/lib64/libblas.so" OR EXISTS "/usr/lib/libblas.so") #Case for CentOS7
list(APPEND ATLAS_LIBRARIES blas)
else() # Case for Ubuntu
list(APPEND ATLAS_LIBRARIES cblas)
endif()
if(EXISTS "/usr/lib/atlas/libtatlas.so" OR EXISTS "/usr/lib64/atlas/libtatlas.so") #Case for CentOS7
list(APPEND ATLAS_LIBRARIES tatlas)
else()
list(APPEND ATLAS_LIBRARIES atlas) #Case for Ubuntu
endif()
list(APPEND ATLAS_LIBRARIES lapack)
# for ubuntu 17.10, directories are different
elseif(EXISTS "/usr/include/x86_64-linux-gnu/cblas.h")
include_directories("/usr/include/x86_64-linux-gnu")
LINK_DIRECTORIES("/usr/lib/x86_64-linux-gnu")
list(APPEND ATLAS_LIBRARIES cblas)
list(APPEND ATLAS_LIBRARIES atlas)
list(APPEND ATLAS_LIBRARIES lapack)
else()
message("No Blas/Atlas libs found, some targets will fail")
endif()
#########################################################
# Base directories, compatible with legacy OAI building #
#########################################################
set (NFAPI_DIR ${OPENAIR_DIR}/nfapi/open-nFAPI)
set (NFAPI_USER_DIR ${OPENAIR_DIR}/nfapi/oai_integration)
set (OPENAIR1_DIR ${OPENAIR_DIR}/openair1)
set (OPENAIR2_DIR ${OPENAIR_DIR}/openair2)
set (OPENAIR3_DIR ${OPENAIR_DIR}/openair3)
set (OPENAIR3_DIR ${OPENAIR_DIR}/openair3)
set (OPENAIR_CMAKE ${OPENAIR_DIR}/cmake_targets)
set (OPENAIR_BIN_DIR ${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY})
project (OpenAirInterface)
####################################################
# compilation flags
#############################################
#set(CMAKE_BUILD_TYPE "Debug")
if (CMAKE_BUILD_TYPE STREQUAL "")
set(CMAKE_BUILD_TYPE "RelWithDebInfo")
endif()
message(STATUS "CMAKE_BUILD_TYPE is ${CMAKE_BUILD_TYPE}")
add_list_string_option(CMAKE_BUILD_TYPE "RelWithDebInfo" "Choose the type of build, options are: None(CMAKE_CXX_FLAGS or CMAKE_C_FLAGS used) Debug Release RelWithDebInfo MinSizeRel." Debug Release RelWithDebInfo MinSizeRel)
# in case /proc/cpuinfo exists we want to inspect available Intrinsics
# -so not to go always through SIMDE emulation
# -so to avoid AVX512 instructions generation by gcc
execute_process(COMMAND uname -m OUTPUT_VARIABLE CPUARCH OUTPUT_STRIP_TRAILING_WHITESPACE)
message(STATUS "CPUARCH ${CPUARCH}")
if(EXISTS "/proc/cpuinfo")
file(STRINGS "/proc/cpuinfo" CPUFLAGS REGEX flags LIMIT_COUNT 1)
else()
message(WARNING "did not find /proc/cpuinfo -- not setting any x86-specific compilation variables")
endif()
eval_boolean(AUTODETECT_AVX512 DEFINED CPUFLAGS AND CPUFLAGS MATCHES "avx512")
add_boolean_option(AVX512 ${AUTODETECT_AVX512} "Whether AVX512 intrinsics is available on the host processor" ON)
eval_boolean(AUTODETECT_AVX2 DEFINED CPUFLAGS AND CPUFLAGS MATCHES "avx2")
add_boolean_option(AVX2 ${AUTODETECT_AVX2} "Whether AVX2 intrinsics is available on the host processor" ON)
if(${CPUARCH} STREQUAL "x86_64" AND DEFINED CPUFLAGS)
# The following intrinsics are assumed to be available on any x86 system
# (avx, f16c, fma, gnfi, mmx, pclmul, sse, sse2, sse3, xop)
set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -DSIMDE_X86_AVX_NATIVE -DSIMDE_X86_AVX_NATIVE -DSIMDE_X86_F16C_NATIVE -DSIMDE_X86_FMA_NATIVE -DSIMDE_X86_GFNI_NATIVE -DSIMDE_X86_MMX_NATIVE -DSIMDE_X86_PCLMUL_NATIVE -DSIMDE_X86_SSE2_NATIVE -DSIMDE_X86_SSE3_NATIVE -DSIMDE_X86_SSE_NATIVE -DSIMDE_X86_XOP_HAVE_COM_ -DSIMDE_X86_XOP_NATIVE")
message(STATUS "AVX512 intrinsics are ${AVX512}")
if(${AVX512})
set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -DSIMDE_X86_AVX512BW_NATIVE -DSIMDE_X86_AVX512F_NATIVE -DSIMDE_X86_AVX512VL_NATIVE -mavx512bw -march=skylake-avx512 -mtune=skylake-avx512")
else()
set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -mno-avx512f -march=native")
endif()
message(STATUS "AVX2 intrinsics are ${AVX2}")
if(${AVX2})
set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -DSIMDE_X86_AVX2_NATIVE -DSIMDE_X86_VPCLMULQDQ_NATIVE")
endif()
if (CPUINFO MATCHES "sse4_1")
set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -DSIMDE_X86_SSE4_1_NATIVE")
endif()
if(CPUINFO MATCHES "sse4_2")
set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -DSIMDE_X86_SSE4_2_NATIVE")
endif()
if(CPUINFO MATCHES "ssse3")
set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -DSIMDE_X86_SSSE3_NATIVE")
endif()
elseif(${CPUARCH} NOT STREQUAL "x86_64")
message(FATAL_ERROR "Cannot compile for CPU architecture ${CPUARCH}")
endif()
set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -fno-var-tracking-assignments -march=native")
# add autotools definitions that were maybe used!
add_definitions("-DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_FCNTL_H=1 -DHAVE_ARPA_INET_H=1 -DHAVE_SYS_TIME_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRERROR=1 -DHAVE_SOCKET=1 -DHAVE_MEMSET=1 -DHAVE_GETTIMEOFDAY=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_LIBSCTP")
set(commonOpts "-pipe -Wno-packed-bitfield-compat -fPIC -Wall -fno-strict-aliasing -rdynamic")
set(CMAKE_C_FLAGS
"${CMAKE_C_FLAGS} ${C_FLAGS_PROCESSOR} ${commonOpts} -std=gnu11 -funroll-loops")
set(CMAKE_CXX_FLAGS
"${CMAKE_CXX_FLAGS} ${C_FLAGS_PROCESSOR} ${commonOpts} -std=c++11")
add_boolean_option(SANITIZE_ADDRESS False "enable the address sanitizer (ASan)" ON)
if (SANITIZE_ADDRESS)
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fsanitize=address -fno-omit-frame-pointer -fno-common")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fsanitize=address -fno-omit-frame-pointer -fno-common")
# There seems to be some incompatibility with pthread_create and the RT scheduler, which
# results in pthread_create hanging.
#
# When we switch from Ubuntu 16.04 to 18.04, we found that running with the address sanitizer,
# the pthread_create function calls were not working. The inital thought was that we were
# trying to create a thread that was not-blocking and would eventually crash the machine during
# the run. After more debugging, we found that we would never even start the thread. We narrowed
# down the first two instances of pthread_create in the gNB and NR UE to be sctp_eNB_task and
# one_thread, respectively. We found that adding sleeps, and various other pauses to the threads
# had not effect. From there, we found that if we add an abort(); prior to the thread loop, we
# do not execute that. This indicated to us that the problem is not likely to be a non-blocking
# thread, but perhaps and issue with pthread_create itself. From there we begain to research the
# issue on the web. See: https://github.com/google/sanitizers/issues/1125
#
# Google searching indicates this appears to be a problem since at least 2018. This could be something
# wrong in the pthread library, or something subtly wrong in this CMakeLists.txt. Use Ubuntu 20.04 instead.
endif ()
add_boolean_option(SANITIZE_UNDEFINED False "enable the undefined behavior sanitizer (UBSan)" ON)
if (SANITIZE_UNDEFINED)
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fsanitize=undefined -fno-sanitize-recover=all")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fsanitize=undefined -fno-sanitize-recover=all")
endif ()
add_definitions("-DASN_DISABLE_OER_SUPPORT -DHAVE_CONFIG_H -DHAVE_CONFIG_H_")
#########################
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -ggdb2 -Wl,-rpath -Wl,${CMAKE_CURRENT_BINARY_DIR}")
#########################
# set a flag for changes in the source code
# these changes are related to hardcoded path to include .h files
set(debugOpt "-ggdb2 -DMALLOC_CHECK_=3 -fno-delete-null-pointer-checks")
set(CMAKE_C_FLAGS_DEBUG "${debugOpt} -O0")
set(CMAKE_C_FLAGS_RELWITHDEBINFO "${debugOpt} -O2")
set(CMAKE_C_FLAGS_RELEASE "-O3")
# Enable assert() for RelWithDebInfo builds
string(REPLACE "-DNDEBUG" "" CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS_RELWITHDEBINFO}")
string(REPLACE "-DNDEBUG" "" CMAKE_CXX_FLAGS_RELWITHDEBINFO "${CMAKE_CXX_FLAGS_RELWITHDEBINFO}")
set(GIT_BRANCH "UNKNOWN")
set(GIT_COMMIT_HASH "UNKNOWN")
set(GIT_COMMIT_DATE "UNKNOWN")
find_package(Git)
if(GIT_FOUND)
# Get the current working branch
execute_process(
COMMAND git rev-parse --abbrev-ref HEAD
WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
OUTPUT_VARIABLE GIT_BRANCH
OUTPUT_STRIP_TRAILING_WHITESPACE
)
# Get the latest abbreviated commit hash of the working branch
execute_process(
COMMAND git log -1 --format=%h
WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
OUTPUT_VARIABLE GIT_COMMIT_HASH
OUTPUT_STRIP_TRAILING_WHITESPACE
)
# Get the latest commit date of the working branch
execute_process(
COMMAND git log -1 --format=%cd
WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
OUTPUT_VARIABLE GIT_COMMIT_DATE
OUTPUT_STRIP_TRAILING_WHITESPACE
)
endif()
# Below is a hard-coded info
set (FIRMWARE_VERSION "No svn information")
add_definitions("-DFIRMWARE_VERSION=\"${FIRMWARE_VERSION}\"")
add_definitions("-DPACKAGE_VERSION=\"Branch: ${GIT_BRANCH} Abrev. Hash: ${GIT_COMMIT_HASH} Date: ${GIT_COMMIT_DATE}\"")
add_definitions("-DPACKAGE_BUGREPORT=\"openair4g-devel@lists.eurecom.fr\"")
# Debug related options
#########################################
add_boolean_option(DEBUG_ASN1 False "ASN1 coder/decoder Debug" OFF)
#add_boolean_option(DEBUG_MAC_INTERFACE False "print MAC-RLC PDU exchange to stdout") # if true, make sure that global and PDCP log levels are trace, not found in code, commented out, to be removed
add_boolean_option(T_TRACER True "Activate the T tracer, a debugging/monitoring framework" ON)
add_boolean_option(UE_AUTOTEST_TRACE False "Activate UE autotest specific logs" ON)
add_boolean_option(UE_DEBUG_TRACE False "Activate UE debug trace" ON)
add_boolean_option(UE_TIMING_TRACE False "Activate UE timing trace" ON)
set (OCP_ITTI ${OPENAIR_DIR}/common/utils/ocp_itti)
add_library(ITTI ${OCP_ITTI}/intertask_interface.cpp)
target_link_libraries(ITTI PRIVATE asn1_lte_rrc_hdrs asn1_nr_rrc_hdrs)
# asn1c skeletons have hardcoded this flag to make customized debug logs
# OAI uses this feature to re-use OAI LOG_I(ASN, ...)
if (DEBUG_ASN1C)
add_definitions(-DHAVE_CONFIG_H)
endif()
##################################################
# ASN.1 grammar C code generation & dependencies #
##################################################
# RRC
######
add_library(lte_rrc
${OPENAIR2_DIR}/RRC/LTE/MESSAGES/asn1_msg.c
${OPENAIR2_DIR}/RRC/LTE/MESSAGES/asn1_msg_NB_IoT.c)
target_link_libraries(lte_rrc PUBLIC asn1_lte_rrc)
target_link_libraries(lte_rrc PRIVATE nr_rrc)
#NR RRC
#######
add_library(nr_rrc ${OPENAIR2_DIR}/RRC/NR/MESSAGES/asn1_msg.c)
target_link_libraries(nr_rrc PUBLIC asn1_nr_rrc asn1_lte_rrc)
# S1AP
##############
set(S1AP_DIR ${OPENAIR3_DIR}/S1AP)
include_directories ("${S1AP_DIR}")
add_library(s1ap
${S1AP_DIR}/s1ap_common.c
${S1AP_DIR}/s1ap_eNB.c
${S1AP_DIR}/s1ap_eNB_context_management_procedures.c
${S1AP_DIR}/s1ap_eNB_decoder.c
${S1AP_DIR}/s1ap_eNB_encoder.c
${S1AP_DIR}/s1ap_eNB_handlers.c
${S1AP_DIR}/s1ap_eNB_itti_messaging.c
${S1AP_DIR}/s1ap_eNB_management_procedures.c
${S1AP_DIR}/s1ap_eNB_nas_procedures.c
${S1AP_DIR}/s1ap_eNB_nnsf.c
${S1AP_DIR}/s1ap_eNB_overload.c
${S1AP_DIR}/s1ap_eNB_trace.c
${S1AP_DIR}/s1ap_eNB_ue_context.c
)
target_link_libraries(s1ap PUBLIC asn1_s1ap)
target_link_libraries(s1ap PRIVATE nr_rrc asn1_nr_rrc_hdrs lte_rrc)
# NGAP
##############
set(NGAP_DIR ${OPENAIR3_DIR}/NGAP)
include_directories ("${NGAP_DIR}")
add_library(ngap
${NGAP_DIR}/ngap_gNB.c
${NGAP_DIR}/ngap_gNB_context_management_procedures.c
${NGAP_DIR}/ngap_gNB_decoder.c
${NGAP_DIR}/ngap_gNB_encoder.c
${NGAP_DIR}/ngap_gNB_handlers.c
${NGAP_DIR}/ngap_gNB_itti_messaging.c
${NGAP_DIR}/ngap_gNB_management_procedures.c
${NGAP_DIR}/ngap_gNB_nas_procedures.c
${NGAP_DIR}/ngap_gNB_nnsf.c
${NGAP_DIR}/ngap_gNB_overload.c
${NGAP_DIR}/ngap_gNB_trace.c
${NGAP_DIR}/ngap_gNB_ue_context.c
)
target_link_libraries(ngap PUBLIC asn1_ngap)
target_link_libraries(ngap PRIVATE asn1_lte_rrc_hdrs asn1_nr_rrc_hdrs)
#M2AP
##############
set(M2AP_DIR ${OPENAIR2_DIR}/M2AP)
add_library(m2ap
${M2AP_DIR}/m2ap_common.c
${M2AP_DIR}/m2ap_eNB.c
${M2AP_DIR}/m2ap_MCE.c
${M2AP_DIR}/m2ap_decoder.c
${M2AP_DIR}/m2ap_encoder.c
${M2AP_DIR}/m2ap_MCE_handler.c
${M2AP_DIR}/m2ap_eNB_handler.c
${M2AP_DIR}/m2ap_itti_messaging.c
${M2AP_DIR}/m2ap_eNB_management_procedures.c
${M2AP_DIR}/m2ap_eNB_generate_messages.c
${M2AP_DIR}/m2ap_MCE_management_procedures.c
${M2AP_DIR}/m2ap_MCE_generate_messages.c
${M2AP_DIR}/m2ap_ids.c
${M2AP_DIR}/m2ap_timers.c
${M2AP_DIR}/m2ap_MCE_interface_management.c
${M2AP_DIR}/m2ap_eNB_interface_management.c
)
target_link_libraries(m2ap PUBLIC asn1_m2ap)
target_link_libraries(m2ap PRIVATE lte_rrc nr_rrc)
target_include_directories(m2ap PRIVATE "${M2AP_DIR}")
#M3AP
##############
set(M3AP_DIR ${OPENAIR3_DIR}/M3AP)
add_library(m3ap
${M3AP_DIR}/m3ap_common.c
${M3AP_DIR}/m3ap_decoder.c
${M3AP_DIR}/m3ap_encoder.c
${M3AP_DIR}/m3ap_MCE_handler.c
${M3AP_DIR}/m3ap_MME_handler.c
${M3AP_DIR}/m3ap_MME.c
${M3AP_DIR}/m3ap_MME_management_procedures.c
${M3AP_DIR}/m3ap_MME_interface_management.c
${M3AP_DIR}/m3ap_MCE.c
${M3AP_DIR}/m3ap_MCE_management_procedures.c
${M3AP_DIR}/m3ap_MCE_interface_management.c
${M3AP_DIR}/m3ap_itti_messaging.c
${M3AP_DIR}/m3ap_ids.c
${M3AP_DIR}/m3ap_timers.c
)
target_link_libraries(m3ap PUBLIC asn1_m3ap)
target_link_libraries(m3ap PRIVATE m2ap)
target_link_libraries(m3ap PRIVATE asn1_lte_rrc_hdrs asn1_nr_rrc_hdrs)
target_include_directories(m3ap PUBLIC "${M3AP_DIR}")
#X2AP
##############
set(X2AP_DIR ${OPENAIR2_DIR}/X2AP)
include_directories ("${X2AP_DIR}")
add_library(x2ap
${X2AP_DIR}/x2ap_common.c
${X2AP_DIR}/x2ap_eNB.c
${X2AP_DIR}/x2ap_eNB_decoder.c
${X2AP_DIR}/x2ap_eNB_encoder.c
${X2AP_DIR}/x2ap_eNB_handler.c
${X2AP_DIR}/x2ap_eNB_itti_messaging.c
${X2AP_DIR}/x2ap_eNB_management_procedures.c
${X2AP_DIR}/x2ap_eNB_generate_messages.c
${X2AP_DIR}/x2ap_ids.c
${X2AP_DIR}/x2ap_timers.c
)
target_link_libraries(x2ap PUBLIC asn1_x2ap)
target_link_libraries(x2ap PRIVATE asn1_lte_rrc_hdrs asn1_nr_rrc_hdrs)
# F1AP
##############
set(F1AP_DIR ${OPENAIR2_DIR}/F1AP)
add_library(f1ap
${F1AP_DIR}/f1ap_common.c
${F1AP_DIR}/f1ap_cu_interface_management.c
${F1AP_DIR}/f1ap_cu_paging.c
${F1AP_DIR}/f1ap_cu_rrc_message_transfer.c
${F1AP_DIR}/f1ap_cu_system_information.c
${F1AP_DIR}/f1ap_cu_task.c
${F1AP_DIR}/f1ap_cu_ue_context_management.c
${F1AP_DIR}/f1ap_cu_warning_message_transmission.c
${F1AP_DIR}/f1ap_decoder.c
${F1AP_DIR}/f1ap_du_interface_management.c
${F1AP_DIR}/f1ap_du_paging.c
${F1AP_DIR}/f1ap_du_rrc_message_transfer.c
${F1AP_DIR}/f1ap_du_system_information.c
${F1AP_DIR}/f1ap_du_task.c
${F1AP_DIR}/f1ap_du_ue_context_management.c
${F1AP_DIR}/f1ap_du_warning_message_transmission.c
${F1AP_DIR}/f1ap_encoder.c
${F1AP_DIR}/f1ap_handlers.c
${F1AP_DIR}/f1ap_itti_messaging.c)
target_include_directories(f1ap PUBLIC F1AP_DIR)
target_link_libraries(f1ap PUBLIC asn1_f1ap)
target_link_libraries(f1ap PRIVATE ngap nr_rrc)
# LPP
##############
# target asn1_lpp in openair3/LPP/MESSAGES/CMakeLists.txt used below
# Hardware dependant options
###################################
add_list1_option(NB_ANTENNAS_RX "4" "Number of antennas in reception" "1" "2" "4")
add_list1_option(NB_ANTENNAS_TX "4" "Number of antennas in transmission" "1" "2" "4")
#NOKIA config enhancement
set (CONFIG_ROOTDIR ${OPENAIR_DIR}/common/config)
add_library(CONFIG_LIB
${CONFIG_ROOTDIR}/config_load_configmodule.c
${CONFIG_ROOTDIR}/config_userapi.c
${CONFIG_ROOTDIR}/config_cmdline.c
)
target_link_libraries(CONFIG_LIB PRIVATE dl UTIL)
add_library(params_libconfig MODULE ${CONFIG_ROOTDIR}/libconfig/config_libconfig.c)
target_link_libraries(params_libconfig config)
# shared library loader
set (SHLIB_LOADER_SOURCES
${OPENAIR_DIR}/common/utils/load_module_shlib.c
)
# include RF devices / transport protocols library modules
######################################################################
set(HWLIB_USRP_SOURCE
${OPENAIR_DIR}/radio/USRP/USERSPACE/LIB/usrp_lib.cpp
)
add_library(oai_usrpdevif MODULE ${HWLIB_USRP_SOURCE} )
target_include_directories(oai_usrpdevif PRIVATE
"${OPENAIR_DIR}/radio/USRP/USERSPACE/LIB/"
${Boost_INCLUDE_DIR}
)
target_link_libraries(oai_usrpdevif uhd)
include_directories("${OPENAIR_DIR}/radio/BLADERF/USERSPACE/LIB/")
set(HWLIB_BLADERF_SOURCE
${OPENAIR_DIR}/radio/BLADERF/USERSPACE/LIB/bladerf_lib.c
)
add_library(oai_bladerfdevif MODULE ${HWLIB_BLADERF_SOURCE} )
target_link_libraries(oai_bladerfdevif bladeRF)
include_directories("${OPENAIR_DIR}/radio/LMSSDR/USERSPACE/LIB/")
set(HWLIB_LMSSDR_SOURCE
${OPENAIR_DIR}/radio/LMSSDR/USERSPACE/LIB/lms_lib.cpp
)
add_library(oai_lmssdrdevif MODULE ${HWLIB_LMSSDR_SOURCE} )
target_include_directories(oai_lmssdrdevif PRIVATE /usr/local/include/lime)
target_link_libraries(oai_lmssdrdevif LimeSuite )
include_directories("${OPENAIR_DIR}/radio/ETHERNET/USERSPACE/LIB/")
set(TPLIB_ETHERNET_SOURCE
${OPENAIR_DIR}/radio/ETHERNET/USERSPACE/LIB/ethernet_lib.c
${OPENAIR_DIR}/radio/ETHERNET/USERSPACE/LIB/eth_udp.c
${OPENAIR_DIR}/radio/ETHERNET/USERSPACE/LIB/eth_raw.c
)
add_library(oai_eth_transpro MODULE ${TPLIB_ETHERNET_SOURCE} )
include_directories("${OPENAIR_DIR}/radio/AW2SORI/")
link_directories("/usr/local/lib")
set(HWLIB_AW2SORI_SOURCE
${OPENAIR_DIR}/radio/AW2SORI/oaiori.c
)
add_library(aw2sori_transpro MODULE ${HWLIB_AW2SORI_SOURCE})
target_compile_options(aw2sori_transpro PRIVATE -shared -fPIC -msse4 -g -ggdb -DLITE_COMPILATION)
target_link_libraries(aw2sori_transpro libori.so)
include_directories("${OPENAIR_DIR}/radio/IRIS/USERSPACE/LIB/")
set(option_HWIRISLIB_lib "-l SoapySDR")
set(HWLIB_IRIS_SOURCE
${OPENAIR_DIR}/radio/IRIS/USERSPACE/LIB/iris_lib.cpp
)
add_library(oai_irisdevif MODULE ${HWLIB_IRIS_SOURCE})
target_include_directories(oai_irisdevif PRIVATE /usr/local/lib/SoapySDR/modules0.7/)
target_link_libraries(oai_irisdevif SoapySDR)
# Benetel 4G library
######################################################################
include_directories ("/usr/include/dpdk")
set(HWLIB_BENETEL_4G_SOURCE
${OPENAIR_DIR}/radio/ETHERNET/benetel/4g/benetel.c
${OPENAIR_DIR}/radio/ETHERNET/benetel/4g/shared_buffers.c
${OPENAIR_DIR}/radio/ETHERNET/benetel/4g/low.c
${OPENAIR_DIR}/radio/ETHERNET/benetel/4g/low_dpdk.c
${OPENAIR_DIR}/radio/ETHERNET/benetel/4g/dpdk_driver.c
)
add_library(benetel_4g MODULE ${HWLIB_BENETEL_4G_SOURCE} )
set_target_properties(benetel_4g PROPERTIES COMPILE_FLAGS "-fvisibility=hidden -I$ENV{RTE_SDK}/$ENV{RTE_TARGET}/include")
SET(DPDK_LIBS "-Wl,-rpath,$ENV{RTE_SDK}/$ENV{RTE_TARGET}/lib -Wl,--whole-archive -L$ENV{RTE_SDK}/$ENV{RTE_TARGET}/lib -ldpdk -Wl,--no-whole-archive")
target_link_libraries(benetel_4g PRIVATE ${DPDK_LIBS})
target_link_libraries(benetel_4g PRIVATE pthread dl rt m numa)
# Benetel 5G library
######################################################################
set(HWLIB_BENETEL_5G_SOURCE
${OPENAIR_DIR}/radio/ETHERNET/benetel/5g/benetel.c
${OPENAIR_DIR}/radio/ETHERNET/benetel/5g/shared_buffers.c
${OPENAIR_DIR}/radio/ETHERNET/benetel/5g/low.c
${OPENAIR_DIR}/radio/ETHERNET/benetel/5g/low_dpdk.c
${OPENAIR_DIR}/radio/ETHERNET/benetel/5g/dpdk_driver.c
)
add_library(benetel_5g MODULE ${HWLIB_BENETEL_5G_SOURCE} )
set_target_properties(benetel_5g PROPERTIES COMPILE_FLAGS "-fvisibility=hidden -I$ENV{RTE_SDK}/$ENV{RTE_TARGET}/include")
SET(DPDK_LIBS "-Wl,-rpath,$ENV{RTE_SDK}/$ENV{RTE_TARGET}/lib -Wl,--whole-archive -L$ENV{RTE_SDK}/$ENV{RTE_TARGET}/lib -ldpdk -Wl,--no-whole-archive")
target_link_libraries(benetel_5g PRIVATE ${DPDK_LIBS})
target_link_libraries(benetel_5g PRIVATE pthread dl rt m numa)
##########################################################
# LDPC offload library
##########################################################
add_boolean_option(ENABLE_LDPC_T1 OFF "Build support for LDPC Offload to T1 library" OFF)
if (ENABLE_LDPC_T1)
pkg_check_modules(LIBDPDK_T1 REQUIRED libdpdk=20.05.0)
find_library(T1 NAMES rte_pmd_hpac_sdfec_pmd REQUIRED)
if (NOT T1)
message(FATAL_ERROR "Library rte_pmd_hpac_sdfec_pmd for T1 offload not found")
endif()
add_library(ldpc_t1 MODULE ${OPENAIR1_DIR}/PHY/CODING/nrLDPC_decoder/nrLDPC_decoder_offload.c)
set_target_properties(ldpc_t1 PROPERTIES COMPILE_FLAGS "-DALLOW_EXPERIMENTAL_API")
target_compile_options(ldpc_t1 PRIVATE ${LIBDPDK_T1_CFLAGS})
target_link_libraries(ldpc_t1 ${LIBDPDK_T1_LDFLAGS} ${T1})
endif()
##########################################################
include_directories ("${OPENAIR_DIR}/radio/COMMON")
##############################################################
# ???!!! TO BE DOCUMENTED OPTIONS !!!???
##############################################################
add_boolean_option(OAI_NW_DRIVER_TYPE_ETHERNET False "????" ON)
add_boolean_option(NAS_NETLINK False "useless ??? Must be True to compile nasmesh driver without rtai ????" ON)
add_boolean_option(OAI_NW_DRIVER_USE_NETLINK True "????" ON)
add_boolean_option(UE_EXPANSION False "enable UE_EXPANSION with max 256 UE" ON)
add_boolean_option(PHY_TX_THREAD False "enable UE_EXPANSION with max 256 UE" ON)
add_boolean_option(PRE_SCD_THREAD False "enable UE_EXPANSION with max 256 UE" ON)
add_boolean_option(UESIM_EXPANSION False "enable UESIM_EXPANSION with max 256 UE" ON)
########################
# Include order
##########################
add_boolean_option(ENB_MODE True "Swap the include directories between openair2 and openair3" ON)
##########################
# SCHEDULING/REAL-TIME/PERF options
##########################
add_boolean_option(ENABLE_USE_CPU_EXECUTION_TIME False "Add data in vcd traces: disable it if perf issues" ON)
add_boolean_option(ENABLE_VCD False "always true now, time measurements of proc calls and var displays" ON)
add_boolean_option(ENABLE_VCD_FIFO False "time measurements of proc calls and var displays sent to FIFO (one more thread)" ON)
add_boolean_option(LINUX False "used in weird memcpy() in pdcp.c ???" ON)
add_boolean_option(LINUX_LIST False "used only in lists.c: either use OAI implementation of lists or Linux one (should be ON, but it is False" ON)
##########################
# PHY options
##########################
add_boolean_option(LOCALIZATION False "???" ON)
add_integer_option(MAX_NUM_CCs 1 "????" ON)
add_boolean_option(SMBV False "Rohde&Schwarz SMBV100A vector signal generator" ON)
add_boolean_option(DEBUG_PHY False "Enable PHY layer debugging options" ON)
add_boolean_option(DEBUG_PHY_PROC False "Enable debugging of PHY layer procedures" ON)
add_boolean_option(DEBUG_DLSCH False "Enable debugging of DLSCH physical layer channel" ON)
add_boolean_option(MEX False "Enabling compilation with mex" ON)
##########################
# NAS LAYER OPTIONS
##########################
add_boolean_option(ENABLE_NAS_UE_LOGGING True "????" ON)
add_boolean_option(NAS_BUILT_IN_UE True "UE NAS layer present in this executable" ON)
add_boolean_option(NAS_UE True "NAS UE INSTANCE (<> NAS_MME)" ON)
##########################
# PDCP LAYER OPTIONS
##########################
#add_boolean_option(LINK_ENB_PDCP_TO_IP_DRIVER False "For eNB, PDCP communicate with a IP driver")
#add_boolean_option(LINK_ENB_PDCP_TO_GTPV1U True "For eNB, PDCP communicate with GTP-U protocol (eNB<->S-GW)")
##########################
# RRC LAYER OPTIONS
##########################
add_boolean_option(RRC_DEFAULT_RAB_IS_AM True "set the RLC mode to AM for the default bearer, otherwise it is UM." ON)
##########################
# S1AP LAYER OPTIONS
##########################
# none
# add the binary tree to the search path for include files
#######################################################
# We will find ConfigOAI.h after generation in target directory
include_directories("${OPENAIR_BIN_DIR}")
# add directories to find all include files
# the internal rule is to use generic names such as defs.h
# but to make it uniq name as adding the relative path in the include directtive
# example: #include "RRC/LTE/rrc_defs.h"
#find_path (include_dirs_all *.h ${OPENAIR_DIR})
#find_path (include_dirs_all *.h PATHS /usr/include NO_CMAKE_PATH)
#include_directories("${include_dirs_all}")
# Legacy exact order
include_directories("${OPENAIR_DIR}/executables")
if(ENB_MODE)
include_directories("${OPENAIR2_DIR}/COMMON")
include_directories("${OPENAIR2_DIR}/UTIL")
include_directories("${OPENAIR2_DIR}/UTIL/LOG")
include_directories("${OPENAIR3_DIR}/COMMON")
include_directories("${OPENAIR3_DIR}/UTILS")
else()
include_directories("${OPENAIR3_DIR}/COMMON")
include_directories("${OPENAIR3_DIR}/UTILS")
include_directories("${OPENAIR2_DIR}/COMMON")
include_directories("${OPENAIR2_DIR}/UTIL")
include_directories("${OPENAIR2_DIR}/UTIL/LOG")
endif()
include_directories("${NFAPI_DIR}/nfapi/public_inc")
include_directories("${NFAPI_DIR}/common/public_inc")
include_directories("${NFAPI_DIR}/pnf/public_inc")
include_directories("${NFAPI_DIR}/nfapi/inc")
include_directories("${NFAPI_DIR}/sim_common/inc")
include_directories("${NFAPI_DIR}/pnf_sim/inc")
include_directories("${OPENAIR1_DIR}")
include_directories("${OPENAIR2_DIR}")
include_directories("${OPENAIR3_DIR}/NAS/TOOLS")
include_directories("${OPENAIR2_DIR}/ENB_APP")
include_directories("${OPENAIR2_DIR}/GNB_APP")
include_directories("${OPENAIR2_DIR}/MCE_APP")
include_directories("${OPENAIR2_DIR}/LAYER2/RLC")
include_directories("${OPENAIR2_DIR}/LAYER2/PDCP_v10.1.0")
include_directories("${OPENAIR2_DIR}/RRC/LTE/MESSAGES")
include_directories("${OPENAIR2_DIR}/RRC/LTE")
include_directories("${OPENAIR_DIR}/common/utils")
include_directories("${OPENAIR_DIR}/common/utils/collection")
include_directories("${OPENAIR_DIR}/common/utils/ocp_itti")
include_directories("${OPENAIR3_DIR}/NAS/COMMON")
include_directories("${OPENAIR3_DIR}/NAS/COMMON/API/NETWORK")
include_directories("${OPENAIR3_DIR}/NAS/COMMON/EMM/MSG")
include_directories("${OPENAIR3_DIR}/NAS/COMMON/ESM/MSG")
include_directories("${OPENAIR3_DIR}/NAS/UE/ESM")
include_directories("${OPENAIR3_DIR}/NAS/UE/EMM")
include_directories("${OPENAIR3_DIR}/NAS/UE/API/USER")
include_directories("${OPENAIR3_DIR}/NAS/COMMON/IES")
include_directories("${OPENAIR3_DIR}/NAS/COMMON/UTIL")
include_directories("${OPENAIR3_DIR}/SECU")
include_directories("${OPENAIR3_DIR}/SCTP")
include_directories("${OPENAIR3_DIR}/S1AP")
include_directories("${OPENAIR2_DIR}/X2AP")
include_directories("${OPENAIR2_DIR}/M2AP")
include_directories("${OPENAIR2_DIR}/F1AP")
include_directories("${OPENAIR3_DIR}/ocp-gtpu")
include_directories("${OPENAIR3_DIR}/M3AP")
include_directories("${OPENAIR3_DIR}/MME_APP")
include_directories("${OPENAIR_DIR}/radio/COMMON")
include_directories("${OPENAIR2_DIR}/ENB_APP/CONTROL_MODULES/PHY")
include_directories("${OPENAIR2_DIR}/ENB_APP/CONTROL_MODULES/MAC")
include_directories("${OPENAIR2_DIR}/ENB_APP/CONTROL_MODULES/RRC")
include_directories("${OPENAIR2_DIR}/ENB_APP/CONTROL_MODULES/PDCP")
include_directories("${OPENAIR2_DIR}/ENB_APP/CONTROL_MODULES/S1AP")
include_directories("${OPENAIR2_DIR}/UTIL/OSA")
include_directories("${OPENAIR2_DIR}/UTIL/MEM")
include_directories("${OPENAIR2_DIR}/UTIL/LISTS")
include_directories("${OPENAIR2_DIR}/UTIL/FIFO")
include_directories("${OPENAIR2_DIR}/UTIL/OCG")
include_directories("${OPENAIR2_DIR}/UTIL/MATH")
include_directories("${OPENAIR2_DIR}/UTIL/TIMER")
include_directories("${OPENAIR2_DIR}/UTIL/OMG")
include_directories("${OPENAIR2_DIR}/UTIL/OTG")
include_directories("${OPENAIR2_DIR}/UTIL/CLI")
include_directories("${OPENAIR2_DIR}/UTIL/OPT")
include_directories("${OPENAIR2_DIR}/UTIL/OMV")
include_directories("${OPENAIR_DIR}")
###########
# Utilities
###############
add_library(HASHTABLE
${OPENAIR_DIR}/common/utils/hashtable/hashtable.c
${OPENAIR_DIR}/common/utils/hashtable/obj_hashtable.c
)
include_directories(${OPENAIR_DIR}/common/utils/hashtable)
add_library(UTIL
${OPENAIR_DIR}/common/utils/LOG/log.c
${OPENAIR_DIR}/common/utils/LOG/vcd_signal_dumper.c
${OPENAIR2_DIR}/UTIL/MATH/oml.c
${OPENAIR2_DIR}/UTIL/OPT/probe.c
${OPENAIR_DIR}/common/utils/threadPool/thread-pool.c
${OPENAIR_DIR}/common/utils/utils.c
${OPENAIR_DIR}/common/utils/system.c
${OPENAIR_DIR}/common/utils/time_meas.c
${OPENAIR_DIR}/common/utils/time_stat.c
)
set(SECU_OSA_SRC
${OPENAIR2_DIR}/UTIL/OSA/osa_key_deriver.c
${OPENAIR2_DIR}/UTIL/OSA/osa_rijndael.c
${OPENAIR2_DIR}/UTIL/OSA/osa_snow3g.c
${OPENAIR2_DIR}/UTIL/OSA/osa_stream_eea.c
${OPENAIR2_DIR}/UTIL/OSA/osa_stream_eia.c
)
add_library(SECU_OSA ${SECU_OSA_SRC} $<TARGET_OBJECTS:ds> )
target_include_directories(SECU_OSA PRIVATE ${OPENAIR_DIR}/common/utils/ds/)
set(SECU_CN_SRC
${OPENAIR3_DIR}/SECU/secu_defs.c
${OPENAIR3_DIR}/SECU/kdf.c
${OPENAIR3_DIR}/SECU/aes_128_ctr.c
${OPENAIR3_DIR}/SECU/aes_128_cbc_cmac.c
${OPENAIR3_DIR}/SECU/sha_256_hmac.c
${OPENAIR3_DIR}/SECU/rijndael.c
${OPENAIR3_DIR}/SECU/snow3g.c
${OPENAIR3_DIR}/SECU/key_nas_deriver.c
${OPENAIR3_DIR}/SECU/nas_stream_eea1.c
${OPENAIR3_DIR}/SECU/nas_stream_eia1.c
${OPENAIR3_DIR}/SECU/nas_stream_eea2.c
${OPENAIR3_DIR}/SECU/nas_stream_eia2.c
)
add_library(SECU_CN ${SECU_CN_SRC} $<TARGET_OBJECTS:ds>)
target_include_directories(SECU_CN PRIVATE ${OPENAIR_DIR}/common/utils/ds/)
# Physical Channel Procedures Scheduling
################################"
set(SCHED_SRC
${OPENAIR1_DIR}/SCHED/fapi_l1.c
${OPENAIR1_DIR}/SCHED/phy_procedures_lte_eNb.c
${OPENAIR1_DIR}/SCHED/phy_procedures_lte_common.c
)
add_library(SCHED_LIB ${SCHED_SRC})
target_link_libraries(SCHED_LIB PRIVATE asn1_lte_rrc_hdrs)
set(SCHED_NR_SRC
${OPENAIR1_DIR}/SCHED_NR/fapi_nr_l1.c
${OPENAIR1_DIR}/SCHED_NR/phy_procedures_nr_gNB.c
${OPENAIR1_DIR}/SCHED_NR/nr_prach_procedures.c
${OPENAIR1_DIR}/SCHED_NR/phy_frame_config_nr.c
)
add_library(SCHED_NR_LIB ${SCHED_NR_SRC})
target_link_libraries(SCHED_NR_LIB PRIVATE asn1_nr_rrc_hdrs)
set(SCHED_SRC_RU
${OPENAIR1_DIR}/SCHED/ru_procedures.c
${OPENAIR1_DIR}/SCHED_NR/nr_ru_procedures.c
${OPENAIR1_DIR}/SCHED/prach_procedures.c
)
add_library(SCHED_RU_LIB ${SCHED_SRC_RU})
target_link_libraries(SCHED_RU_LIB PRIVATE asn1_lte_rrc_hdrs)
set(SCHED_SRC_UE
${OPENAIR1_DIR}/SCHED_UE/phy_procedures_lte_ue.c
${OPENAIR1_DIR}/SCHED/phy_procedures_lte_common.c
${OPENAIR1_DIR}/SCHED_UE/pucch_pc.c
${OPENAIR1_DIR}/SCHED_UE/pusch_pc.c
${OPENAIR1_DIR}/SCHED_UE/srs_pc.c
)
add_library(SCHED_UE_LIB ${SCHED_SRC_UE})
target_link_libraries(SCHED_UE_LIB PRIVATE asn1_lte_rrc_hdrs asn1_nr_rrc_hdrs)
set(SCHED_SRC_NR_UE
${OPENAIR1_DIR}/SCHED_NR_UE/phy_procedures_nr_ue.c
${OPENAIR1_DIR}/SCHED_NR_UE/fapi_nr_ue_l1.c
${OPENAIR1_DIR}/SCHED_NR_UE/phy_frame_config_nr_ue.c
${OPENAIR1_DIR}/SCHED_NR_UE/harq_nr.c
${OPENAIR1_DIR}/SCHED_NR_UE/pucch_uci_ue_nr.c
)
add_library(SCHED_NR_UE_LIB ${SCHED_SRC_NR_UE})
target_link_libraries(SCHED_NR_UE_LIB PRIVATE asn1_lte_rrc_hdrs asn1_nr_rrc_hdrs)
# nFAPI
#################################
set(NFAPI_COMMON_SRC
${NFAPI_DIR}/common/src/debug.c
)
add_library(NFAPI_COMMON_LIB ${NFAPI_COMMON_SRC})
include_directories(${NFAPI_DIR}/common/public_inc)
set(NFAPI_SRC
${NFAPI_DIR}/nfapi/src/nfapi.c
${NFAPI_DIR}/nfapi/src/nfapi_p4.c
${NFAPI_DIR}/nfapi/src/nfapi_p5.c
${NFAPI_DIR}/nfapi/src/nfapi_p7.c
)
add_library(NFAPI_LIB ${NFAPI_SRC})
include_directories(${NFAPI_DIR}/nfapi/public_inc)
include_directories(${NFAPI_DIR}/nfapi/inc)
set(NFAPI_PNF_SRC
${NFAPI_DIR}/pnf/src/pnf.c
${NFAPI_DIR}/pnf/src/pnf_interface.c
${NFAPI_DIR}/pnf/src/pnf_p7.c
${NFAPI_DIR}/pnf/src/pnf_p7_interface.c
)
add_library(NFAPI_PNF_LIB ${NFAPI_PNF_SRC})
target_link_libraries(NFAPI_PNF_LIB PRIVATE asn1_lte_rrc_hdrs asn1_nr_rrc_hdrs)
include_directories(${NFAPI_DIR}/pnf/public_inc)
include_directories(${NFAPI_DIR}/pnf/inc)
set(NFAPI_VNF_SRC
${NFAPI_DIR}/vnf/src/vnf.c
${NFAPI_DIR}/vnf/src/vnf_interface.c
${NFAPI_DIR}/vnf/src/vnf_p7.c
${NFAPI_DIR}/vnf/src/vnf_p7_interface.c
)
add_library(NFAPI_VNF_LIB ${NFAPI_VNF_SRC})
target_link_libraries(NFAPI_VNF_LIB PRIVATE asn1_lte_rrc_hdrs asn1_nr_rrc_hdrs)
include_directories(${NFAPI_DIR}/vnf/public_inc)
include_directories(${NFAPI_DIR}/vnf/inc)
# nFAPI user defined code
#############################
set(NFAPI_USER_SRC
${NFAPI_USER_DIR}/nfapi.c
${NFAPI_USER_DIR}/nfapi_pnf.c
${NFAPI_USER_DIR}/nfapi_vnf.c
${NFAPI_USER_DIR}/gnb_ind_vars.c
)
add_library(NFAPI_USER_LIB ${NFAPI_USER_SRC})
target_link_libraries(NFAPI_USER_LIB PRIVATE asn1_lte_rrc_hdrs asn1_nr_rrc_hdrs)
include_directories(${NFAPI_USER_DIR})
# Layer 1
#############################
set(PHY_TURBOSRC
${OPENAIR1_DIR}/PHY/CODING/3gpplte_sse.c
${OPENAIR1_DIR}/PHY/CODING/3gpplte.c
${OPENAIR1_DIR}/PHY/CODING/3gpplte_turbo_decoder_sse_8bit.c
${OPENAIR1_DIR}/PHY/CODING/3gpplte_turbo_decoder_sse_16bit.c
${OPENAIR1_DIR}/PHY/CODING/3gpplte_turbo_decoder_avx2_16bit.c
${OPENAIR1_DIR}/PHY/CODING/3gpplte_turbo_decoder.c
)
set(PHY_POLARSRC
${OPENAIR1_DIR}/PHY/CODING/nr_polar_init.c
${OPENAIR1_DIR}/PHY/CODING/nrPolar_tools/nr_bitwise_operations.c
${OPENAIR1_DIR}/PHY/CODING/nrPolar_tools/nr_crc_byte.c
${OPENAIR1_DIR}/PHY/CODING/nrPolar_tools/nr_polar_crc.c
${OPENAIR1_DIR}/PHY/CODING/nrPolar_tools/nr_polar_decoder.c
${OPENAIR1_DIR}/PHY/CODING/nrPolar_tools/nr_polar_decoding_tools.c
${OPENAIR1_DIR}/PHY/CODING/nrPolar_tools/nr_polar_encoder.c
${OPENAIR1_DIR}/PHY/CODING/nrPolar_tools/nr_polar_interleaving_pattern.c
${OPENAIR1_DIR}/PHY/CODING/nrPolar_tools/nr_polar_kernal_operation.c
${OPENAIR1_DIR}/PHY/CODING/nrPolar_tools/nr_polar_kronecker_power_matrices.c
${OPENAIR1_DIR}/PHY/CODING/nrPolar_tools/nr_polar_matrix_and_array.c
${OPENAIR1_DIR}/PHY/CODING/nrPolar_tools/nr_polar_procedures.c
${OPENAIR1_DIR}/PHY/CODING/nrPolar_tools/nr_polar_sequence_pattern.c
)
set(PHY_SMALLBLOCKSRC
${OPENAIR1_DIR}/PHY/CODING/nrSmallBlock/encodeSmallBlock.c
${OPENAIR1_DIR}/PHY/CODING/nrSmallBlock/decodeSmallBlock.c
)
set(PHY_TURBOIF
${OPENAIR1_DIR}/PHY/CODING/coding_load.c
)
set(PHY_LDPC_ORIG_SRC
${OPENAIR1_DIR}/PHY/CODING/nrLDPC_decoder/nrLDPC_decoder.c
${OPENAIR1_DIR}/PHY/CODING/nrLDPC_encoder/ldpc_encoder.c
)
set(PHY_LDPC_OPTIM_SRC
${OPENAIR1_DIR}/PHY/CODING/nrLDPC_decoder/nrLDPC_decoder.c
${OPENAIR1_DIR}/PHY/CODING/nrLDPC_encoder/ldpc_encoder_optim.c
)
set(PHY_LDPC_OPTIM8SEG_SRC
${OPENAIR1_DIR}/PHY/CODING/nrLDPC_decoder/nrLDPC_decoder.c
${OPENAIR1_DIR}/PHY/CODING/nrLDPC_encoder/ldpc_encoder_optim8seg.c
)
set(PHY_LDPC_OPTIM8SEGMULTI_SRC
${OPENAIR1_DIR}/PHY/CODING/nrLDPC_decoder/nrLDPC_decoder.c
${OPENAIR1_DIR}/PHY/CODING/nrLDPC_encoder/ldpc_encoder_optim8segmulti.c
)
set(PHY_LDPC_CUDA_SRC
${OPENAIR1_DIR}/PHY/CODING/nrLDPC_decoder_LYC/nrLDPC_decoder_LYC.cu
${OPENAIR1_DIR}/PHY/CODING/nrLDPC_encoder/ldpc_encoder_optim8segmulti.c
)
set(PHY_LDPC_CL_SRC
${OPENAIR1_DIR}/PHY/CODING/nrLDPC_decoder/nrLDPC_decoder_CL.c
${OPENAIR1_DIR}/PHY/CODING/nrLDPC_encoder/ldpc_encoder_optim8segmulti.c
)
add_custom_target( nrLDPC_decoder_kernels_CL
COMMAND gcc ${OPENAIR1_DIR}/PHY/CODING/nrLDPC_decoder/nrLDPC_decoder_CL.c -dD -DNRLDPC_KERNEL_SOURCE -E -o ${CMAKE_CURRENT_BINARY_DIR}/nrLDPC_decoder_kernels_CL.clc
SOURCES ${OPENAIR1_DIR}/PHY/CODING/nrLDPC_decoder/nrLDPC_decoder_CL.c
)
set(PHY_NR_CODINGIF
${OPENAIR1_DIR}/PHY/CODING/nrLDPC_load.c;
)
add_library(ldpc_orig MODULE ${PHY_LDPC_ORIG_SRC} )
target_link_libraries(ldpc_orig PRIVATE ldpc_gen_HEADERS)
add_library(ldpc_optim MODULE ${PHY_LDPC_OPTIM_SRC} )
target_link_libraries(ldpc_optim PRIVATE ldpc_gen_HEADERS)
add_library(ldpc_optim8seg MODULE ${PHY_LDPC_OPTIM8SEG_SRC} )
target_link_libraries(ldpc_optim8seg PRIVATE ldpc_gen_HEADERS)
add_library(ldpc_cl MODULE ${PHY_LDPC_CL_SRC} )
target_link_libraries(ldpc_cl OpenCL)
add_dependencies(ldpc_cl nrLDPC_decoder_kernels_CL)
##############################################
# Base CUDA setting
##############################################
add_boolean_option(ENABLE_LDPC_CUDA OFF "Build support for CUDA" OFF)
if (ENABLE_LDPC_CUDA)
find_package(CUDA REQUIRED)
SET(CUDA_NVCC_FLAG "${CUDA_NVCC_FLAGS};-arch=sm_60;")
SET(CUDA_VERBOSE_BUILD ON)
cuda_add_library(ldpc_cuda MODULE ${PHY_LDPC_CUDA_SRC})
set_target_properties(ldpc_cuda PROPERTIES CUDA_SEPARABLE_COMPILATION ON)
if (NOT CUDA_FOUND)
message(FATAL_ERROR "no CUDA found")
endif()
endif()
add_library(ldpc MODULE ${PHY_LDPC_OPTIM8SEGMULTI_SRC} )
target_link_libraries(ldpc PRIVATE ldpc_gen_HEADERS)
add_library(coding MODULE ${PHY_TURBOSRC} )
add_library(dfts MODULE ${OPENAIR1_DIR}/PHY/TOOLS/oai_dfts.c )
set(PHY_SRC_COMMON
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dci_tools_common.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/lte_mcs.c
# ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/slss.c
# ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/sldch.c
# ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/slsch.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/get_pmi.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/group_hopping.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/phich_common.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pcfich_common.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pmch_common.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/power_control.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/prach_common.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pucch_common.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dlsch_scrambling.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/srs_modulation.c
${OPENAIR1_DIR}/PHY/MODULATION/ofdm_mod.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_sync_time.c
${OPENAIR1_DIR}/PHY/LTE_REFSIG/lte_dl_cell_spec.c
${OPENAIR1_DIR}/PHY/LTE_REFSIG/lte_dl_uespec.c
${OPENAIR1_DIR}/PHY/LTE_REFSIG/lte_gold.c
${OPENAIR1_DIR}/PHY/LTE_REFSIG/lte_gold_mbsfn.c
${OPENAIR1_DIR}/PHY/LTE_REFSIG/lte_dl_mbsfn.c
${OPENAIR1_DIR}/PHY/LTE_REFSIG/lte_ul_ref.c
${OPENAIR1_DIR}/PHY/CODING/lte_segmentation.c
${OPENAIR1_DIR}/PHY/CODING/nr_segmentation.c
${OPENAIR1_DIR}/PHY/CODING/nr_rate_matching.c
${OPENAIR1_DIR}/PHY/CODING/ccoding_byte.c
${OPENAIR1_DIR}/PHY/CODING/ccoding_byte_lte.c
${OPENAIR1_DIR}/PHY/CODING/3gpplte_sse.c
${OPENAIR1_DIR}/PHY/CODING/crc_byte.c
${PHY_TURBOIF}
${OPENAIR1_DIR}/PHY/CODING/lte_rate_matching.c
${OPENAIR1_DIR}/PHY/CODING/viterbi.c
${OPENAIR1_DIR}/PHY/CODING/viterbi_lte.c
${OPENAIR1_DIR}/PHY/INIT/init_top.c
${OPENAIR1_DIR}/PHY/INIT/lte_parms.c
${OPENAIR1_DIR}/PHY/TOOLS/cadd_vv.c
${OPENAIR1_DIR}/PHY/TOOLS/dfts_load.c
${OPENAIR1_DIR}/PHY/TOOLS/log2_approx.c
${OPENAIR1_DIR}/PHY/TOOLS/cmult_sv.c
${OPENAIR1_DIR}/PHY/TOOLS/cmult_vv.c
${OPENAIR1_DIR}/PHY/TOOLS/cdot_prod.c
${OPENAIR1_DIR}/PHY/TOOLS/signal_energy.c
${OPENAIR1_DIR}/PHY/TOOLS/dB_routines.c
${OPENAIR1_DIR}/PHY/TOOLS/sqrt.c
${OPENAIR1_DIR}/PHY/TOOLS/lut.c
)
set(PHY_SRC
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pss.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/sss.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/sss_gen.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pilots.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pilots_mbsfn.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dlsch_coding.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dlsch_modulation.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dci_tools.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pbch.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dci.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/edci.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/phich.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pcfich.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pucch.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pmch.c
# ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/ulsch_demodulation.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/ulsch_decoding.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/rar_tools.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/uci_tools.c
# ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/freq_equalization.c
# ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_adjust_sync_eNB.c
# ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ul_channel_estimation.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_eNB_measurements.c
${OPENAIR1_DIR}/PHY/INIT/lte_init.c
)
set(PHY_SRC_RU
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/if4_tools.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/drs_modulation.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/ulsch_demodulation.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ul_channel_estimation.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_adjust_sync_eNB.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/freq_equalization.c
${OPENAIR1_DIR}/PHY/MODULATION/slot_fep_ul.c
${OPENAIR1_DIR}/PHY/MODULATION/slot_fep_nr.c
${OPENAIR1_DIR}/PHY/MODULATION/ul_7_5_kHz.c
${OPENAIR1_DIR}/PHY/MODULATION/gen_75KHz.cpp
${OPENAIR1_DIR}/PHY/MODULATION/beamforming.c
${OPENAIR1_DIR}/PHY/MODULATION/compute_bf_weights.c
${OPENAIR1_DIR}/PHY/INIT/lte_init_ru.c
${OPENAIR1_DIR}/PHY/INIT/nr_init_ru.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/prach.c
)
set(PHY_SRC_UE
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/sss_ue.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/sss_gen.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_demodulation.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_llr_computation.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/linear_preprocessing_rec.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_decoding.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dci_tools_ue.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/uci_tools_ue.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/pbch_ue.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dci_ue.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/phich_ue.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/pcfich_ue.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/pucch_ue.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/prach_ue.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/pmch_ue.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/pch_ue.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/slss.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/sldch.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/slsch.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/drs_modulation.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/ulsch_modulation.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/ulsch_coding.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/rar_tools_ue.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/initial_sync.c
${OPENAIR1_DIR}/PHY/MODULATION/slot_fep.c
${OPENAIR1_DIR}/PHY/MODULATION/slot_fep_mbsfn.c
${OPENAIR1_DIR}/PHY/MODULATION/ul_7_5_kHz_ue.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_sync_time.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_sync_timefreq.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_adjust_sync_ue.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_dl_channel_estimation.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_dl_bf_channel_estimation.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_dl_mbsfn_channel_estimation.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_est_freq_offset.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ue_measurements.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/adjust_gain.c
${OPENAIR1_DIR}/PHY/INIT/lte_init_ue.c
)
set(PHY_NR_SRC_COMMON
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_prach_common.c
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_csi_rs.c
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_scrambling.c
${OPENAIR1_DIR}/PHY/NR_REFSIG/scrambling_luts.c
${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/srs_modulation_nr.c
)
set(PHY_NR_SRC
${OPENAIR1_DIR}/PHY/INIT/nr_init.c
${OPENAIR1_DIR}/PHY/INIT/nr_parms.c
${OPENAIR1_DIR}/PHY/MODULATION/nr_modulation.c
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_prs.c
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_pss.c
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_sss.c
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_pbch.c
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_dci.c
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_dci_tools.c
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_dlsch.c
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_dlsch_tools.c
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_dlsch_coding.c
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_ulsch_decoding.c
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_ulsch.c
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_tbs_tools.c
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_sch_dmrs.c
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_prach.c
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_ulsch_llr_computation.c
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_ulsch_demodulation.c
${OPENAIR1_DIR}/PHY/NR_REFSIG/ul_ref_seq_nr.c
${OPENAIR1_DIR}/PHY/NR_REFSIG/nr_dmrs_rx.c
${OPENAIR1_DIR}/PHY/NR_REFSIG/nr_gold.c
${OPENAIR1_DIR}/PHY/NR_REFSIG/nr_gen_mod_table.c
${OPENAIR1_DIR}/PHY/NR_REFSIG/dmrs_nr.c
${OPENAIR1_DIR}/PHY/NR_REFSIG/ptrs_nr.c
${OPENAIR1_DIR}/PHY/NR_UE_ESTIMATION/filt16a_32.c
${OPENAIR1_DIR}/PHY/NR_ESTIMATION/nr_ul_channel_estimation.c
${OPENAIR1_DIR}/PHY/NR_ESTIMATION/nr_measurements_gNB.c
${OPENAIR1_DIR}/PHY/TOOLS/file_output.c
${OPENAIR1_DIR}/PHY/TOOLS/cadd_vv.c
#${OPENAIR1_DIR}/PHY/TOOLS/lte_dfts.c
${OPENAIR1_DIR}/PHY/TOOLS/log2_approx.c
${OPENAIR1_DIR}/PHY/TOOLS/cmult_sv.c
${OPENAIR1_DIR}/PHY/TOOLS/cmult_vv.c
${OPENAIR1_DIR}/PHY/TOOLS/cdot_prod.c
${OPENAIR1_DIR}/PHY/TOOLS/signal_energy.c
${OPENAIR1_DIR}/PHY/TOOLS/dB_routines.c
${OPENAIR1_DIR}/PHY/TOOLS/sqrt.c
${OPENAIR1_DIR}/PHY/TOOLS/lut.c
${PHY_POLARSRC}
${PHY_SMALLBLOCKSRC}
${PHY_NR_CODINGIF}
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/pucch_rx.c
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/srs_rx.c
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_uci_tools_common.c
)
set(PHY_NR_UE_SRC
${OPENAIR1_DIR}/PHY/INIT/nr_parms.c
${OPENAIR1_DIR}/PHY/MODULATION/nr_modulation.c
${OPENAIR1_DIR}/PHY/MODULATION/slot_fep_nr.c
${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/pss_nr.c
${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/sss_nr.c
${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/cic_filter_nr.c
${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/nr_initial_sync.c
${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/nr_ue_rf_helpers.c
${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/nr_pbch.c
${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/nr_dlsch_demodulation.c
${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/nr_ulsch_coding.c
${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/nr_dlsch_decoding.c
${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/nr_dlsch_llr_computation.c
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_tbs_tools.c
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_prach_common.c
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_sch_dmrs.c
${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/
${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/nr_prach.c
${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/dci_nr.c
${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/pucch_nr.c
${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/csi_rx.c
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_uci_tools_common.c
${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/nr_ulsch_ue.c
${OPENAIR1_DIR}/PHY/NR_REFSIG/ul_ref_seq_nr.c
${OPENAIR1_DIR}/PHY/NR_REFSIG/nr_dmrs_rx.c
${OPENAIR1_DIR}/PHY/NR_REFSIG/dmrs_nr.c
${OPENAIR1_DIR}/PHY/NR_REFSIG/ptrs_nr.c
${OPENAIR1_DIR}/PHY/NR_REFSIG/nr_gold_ue.c
${OPENAIR1_DIR}/PHY/NR_REFSIG/nr_gen_mod_table.c
${OPENAIR1_DIR}/PHY/NR_UE_ESTIMATION/filt16a_32.c
${OPENAIR1_DIR}/PHY/NR_UE_ESTIMATION/nr_dl_channel_estimation.c
${OPENAIR1_DIR}/PHY/NR_UE_ESTIMATION/nr_adjust_synch_ue.c
${OPENAIR1_DIR}/PHY/NR_UE_ESTIMATION/nr_ue_measurements.c
${OPENAIR1_DIR}/PHY/NR_UE_ESTIMATION/nr_adjust_gain.c
${OPENAIR1_DIR}/PHY/TOOLS/file_output.c
${OPENAIR1_DIR}/PHY/TOOLS/cadd_vv.c
# ${OPENAIR1_DIR}/PHY/TOOLS/lte_dfts.c
${OPENAIR1_DIR}/PHY/TOOLS/log2_approx.c
${OPENAIR1_DIR}/PHY/TOOLS/cmult_sv.c
${OPENAIR1_DIR}/PHY/TOOLS/cmult_vv.c
${OPENAIR1_DIR}/PHY/TOOLS/cdot_prod.c
${OPENAIR1_DIR}/PHY/TOOLS/signal_energy.c
${OPENAIR1_DIR}/PHY/TOOLS/dB_routines.c
${OPENAIR1_DIR}/PHY/TOOLS/sqrt.c
${OPENAIR1_DIR}/PHY/TOOLS/lut.c
${OPENAIR1_DIR}/PHY/INIT/nr_init_ue.c
# ${OPENAIR1_DIR}/SIMULATION/NR_UE_PHY/unit_tests/src/pucch_uci_test.c
${PHY_POLARSRC}
${PHY_SMALLBLOCKSRC}
${PHY_NR_CODINGIF}
)
if (${SMBV})
set(PHY_SRC "${PHY_SRC} ${OPENAIR1_DIR}/PHY/TOOLS/smbv.c")
endif (${SMBV})
set(PHY_SRC_UE ${PHY_SRC_UE} ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_llr_computation_avx2.c)
set(PHY_NR_UE_SRC ${PHY_NR_UE_SRC} ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_llr_computation_avx2.c)
add_library(PHY_COMMON ${PHY_SRC_COMMON})
add_dependencies(PHY_COMMON dfts)
target_link_libraries(PHY_COMMON PRIVATE asn1_lte_rrc_hdrs)
add_library(PHY ${PHY_SRC})
target_link_libraries(PHY PRIVATE asn1_lte_rrc_hdrs asn1_nr_rrc_hdrs)
add_library(PHY_UE ${PHY_SRC_UE})
target_link_libraries(PHY_UE PRIVATE asn1_lte_rrc_hdrs asn1_nr_rrc_hdrs)
add_library(PHY_NR_COMMON ${PHY_NR_SRC_COMMON})
add_library(PHY_NR ${PHY_NR_SRC})
add_library(PHY_NR_UE ${PHY_NR_UE_SRC})
add_library(PHY_RU ${PHY_SRC_RU})
target_link_libraries(PHY_RU PRIVATE asn1_lte_rrc_hdrs)
#Library for mex functions
#########################3
set(PHY_MEX_UE
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/linear_preprocessing_rec.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_llr_computation.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_demodulation.c
${OPENAIR1_DIR}/PHY/TOOLS/log2_approx.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/lte_mcs.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/get_pmi.c
${OPENAIR1_DIR}/PHY/TOOLS/dB_routines.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pmch_common.c
${OPENAIR1_DIR}/PHY/TOOLS/cadd_vv.c
${OPENAIR1_DIR}/PHY/TOOLS/cmult_sv.c
${OPENAIR1_DIR}/PHY/TOOLS/cmult_vv.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_llr_computation_avx2.c
${OPENAIR1_DIR}/PHY/TOOLS/signal_energy.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ue_measurements.c
${OPENAIR_DIR}/common/utils/LOG/log.c
${OPENAIR_DIR}/common/utils/T/T.c
${OPENAIR_DIR}/common/utils/T/local_tracer.c
)
add_library(PHY_MEX ${PHY_MEX_UE} ${CONFIG_LIB})
target_link_libraries(PHY_MEX PRIVATE asn1_lte_rrc_hdrs)
#Layer 2 library
#####################
set(MAC_DIR ${OPENAIR2_DIR}/LAYER2/MAC)
set(NR_GNB_MAC_DIR ${OPENAIR2_DIR}/LAYER2/NR_MAC_gNB)
set(NR_UE_MAC_DIR ${OPENAIR2_DIR}/LAYER2/NR_MAC_UE)
set(PHY_INTERFACE_DIR ${OPENAIR2_DIR}/PHY_INTERFACE)
set(NR_PHY_INTERFACE_DIR ${OPENAIR2_DIR}/NR_PHY_INTERFACE)
set(NR_UE_PHY_INTERFACE_DIR ${OPENAIR2_DIR}/NR_UE_PHY_INTERFACE)
set(RRC_DIR ${OPENAIR2_DIR}/RRC/LTE)
set(NR_RRC_DIR ${OPENAIR2_DIR}/RRC/NR)
set(NR_UE_RRC_DIR ${OPENAIR2_DIR}/RRC/NR_UE)
set(PDCP_DIR ${OPENAIR2_DIR}/LAYER2/PDCP_v10.1.0)
set(RLC_V2
${OPENAIR2_DIR}/LAYER2/rlc_v2/rlc_oai_api.c
${OPENAIR2_DIR}/LAYER2/rlc_v2/asn1_utils.c
${OPENAIR2_DIR}/LAYER2/rlc_v2/rlc_ue_manager.c
${OPENAIR2_DIR}/LAYER2/rlc_v2/rlc_entity.c
${OPENAIR2_DIR}/LAYER2/rlc_v2/rlc_entity_am.c
${OPENAIR2_DIR}/LAYER2/rlc_v2/rlc_entity_um.c
${OPENAIR2_DIR}/LAYER2/rlc_v2/rlc_pdu.c
${OPENAIR2_DIR}/LAYER2/rlc_v2/rlc_sdu.c
)
set(NR_RLC_SRC
${OPENAIR2_DIR}/LAYER2/nr_rlc/asn1_utils.c
${OPENAIR2_DIR}/LAYER2/nr_rlc/nr_rlc_entity.c
${OPENAIR2_DIR}/LAYER2/nr_rlc/nr_rlc_entity_am.c
${OPENAIR2_DIR}/LAYER2/nr_rlc/nr_rlc_entity_tm.c
${OPENAIR2_DIR}/LAYER2/nr_rlc/nr_rlc_entity_um.c
${OPENAIR2_DIR}/LAYER2/nr_rlc/nr_rlc_oai_api.c
${OPENAIR2_DIR}/LAYER2/nr_rlc/nr_rlc_pdu.c
${OPENAIR2_DIR}/LAYER2/nr_rlc/nr_rlc_sdu.c
${OPENAIR2_DIR}/LAYER2/nr_rlc/nr_rlc_ue_manager.c
)
set(NR_PDCP_SRC
${OPENAIR2_DIR}/LAYER2/nr_pdcp/nr_pdcp_oai_api.c
${OPENAIR2_DIR}/LAYER2/nr_pdcp/nr_pdcp_ue_manager.c
${OPENAIR2_DIR}/LAYER2/nr_pdcp/nr_pdcp_entity.c
${OPENAIR2_DIR}/LAYER2/nr_pdcp/nr_pdcp_sdu.c
${OPENAIR2_DIR}/LAYER2/nr_pdcp/nr_pdcp_timer_thread.c
${OPENAIR2_DIR}/LAYER2/nr_pdcp/nr_pdcp_security_nea2.c
${OPENAIR2_DIR}/LAYER2/nr_pdcp/nr_pdcp_integrity_nia2.c
${OPENAIR2_DIR}/LAYER2/nr_pdcp/nr_pdcp_integrity_nia1.c
${OPENAIR2_DIR}/LAYER2/nr_pdcp/asn1_utils.c
#hack: include these files to compile the nr phy simulators
#these files should not be here, will be removed at some point when the
#computation is done directly inside nr_pdcp_integrity_nia1.c instead
#of reusing code of osa_stream_eia.c
${OPENAIR2_DIR}/UTIL/OSA/osa_stream_eia.c
${OPENAIR2_DIR}/UTIL/OSA/osa_snow3g.c
${OPENAIR2_DIR}/UTIL/OSA/osa_rijndael.c
)
set(NR_SDAP_SRC
${OPENAIR2_DIR}/SDAP/nr_sdap/nr_sdap.c
${OPENAIR2_DIR}/SDAP/nr_sdap/nr_sdap_entity.c
)
set(L2_SRC
${PDCP_DIR}/pdcp.c
${PDCP_DIR}/pdcp_fifo.c
${PDCP_DIR}/pdcp_sequence_manager.c
${PDCP_DIR}/pdcp_primitives.c
${PDCP_DIR}/pdcp_util.c
${PDCP_DIR}/pdcp_security.c
${OPENAIR2_DIR}/LAYER2/openair2_proc.c
# ${RRC_DIR}/rrc_UE.c
${RRC_DIR}/rrc_eNB.c
${RRC_DIR}/rrc_eNB_endc.c
${RRC_DIR}/rrc_eNB_S1AP.c
${RRC_DIR}/rrc_eNB_M2AP.c
${RRC_DIR}/rrc_eNB_UE_context.c
${NR_RRC_DIR}/rrc_gNB_UE_context.c
${RRC_DIR}/rrc_common.c
${RRC_DIR}/L2_interface.c
${RRC_DIR}/L2_interface_common.c
${RRC_DIR}/L2_interface_ue.c
)
set(L2_RRC_SRC
${OPENAIR2_DIR}/LAYER2/openair2_proc.c
# ${RRC_DIR}/rrc_UE.c
${RRC_DIR}/rrc_eNB.c
${RRC_DIR}/rrc_eNB_endc.c
${RRC_DIR}/rrc_eNB_S1AP.c
${RRC_DIR}/rrc_eNB_M2AP.c
${RRC_DIR}/rrc_eNB_UE_context.c
${RRC_DIR}/rrc_common.c
${RRC_DIR}/L2_interface.c
${RRC_DIR}/L2_interface_common.c
${RRC_DIR}/L2_interface_ue.c
)
set(L2_LTE_SRC
${RLC_V2}
)
set(L2_NR_SRC
${NR_RLC_SRC}
${NR_PDCP_SRC}
${NR_SDAP_SRC}
${NR_RRC_DIR}/rrc_gNB.c
${NR_RRC_DIR}/nr_rrc_common.c
${NR_RRC_DIR}/L2_nr_interface.c
${NR_RRC_DIR}/mac_rrc_dl_direct.c
${NR_RRC_DIR}/mac_rrc_dl_f1ap.c
${NR_RRC_DIR}/nr_rrc_config.c
${NR_RRC_DIR}/rrc_gNB_nsa.c
${NR_RRC_DIR}/rrc_gNB_internode.c
${NR_RRC_DIR}/rrc_gNB_reconfig.c
${NR_RRC_DIR}/rrc_gNB_UE_context.c
${NR_RRC_DIR}/rrc_gNB_NGAP.c
${NR_RRC_DIR}/rrc_gNB_radio_bearers.c
)
set(L2_SRC_UE
${PDCP_DIR}/pdcp.c
${PDCP_DIR}/pdcp_fifo.c
${PDCP_DIR}/pdcp_sequence_manager.c
${PDCP_DIR}/pdcp_primitives.c
${PDCP_DIR}/pdcp_util.c
${PDCP_DIR}/pdcp_security.c
${RRC_DIR}/rrc_UE.c
${RRC_DIR}/rrc_common.c
${RRC_DIR}/L2_interface_common.c
${RRC_DIR}/L2_interface_ue.c
)
set(L2_RRC_SRC_UE
${RRC_DIR}/rrc_UE.c
${RRC_DIR}/rrc_common.c
${RRC_DIR}/L2_interface_common.c
${RRC_DIR}/L2_interface_ue.c
)
set(NR_L2_SRC_UE
${NR_RLC_SRC}
${NR_PDCP_SRC}
${NR_SDAP_SRC}
${NR_UE_RRC_DIR}/L2_interface_ue.c
${NR_UE_RRC_DIR}/main_ue.c
${NR_RRC_DIR}/nr_rrc_config.c
${NR_UE_RRC_DIR}/rrc_UE.c
${NR_UE_RRC_DIR}/rrc_nsa.c
${NR_RRC_DIR}/nr_rrc_config.c
)
set (MAC_SRC
#${PHY_INTERFACE_DIR}/phy_stub_UE.c
${PHY_INTERFACE_DIR}/IF_Module.c
${MAC_DIR}/main.c
#${MAC_DIR}/main_ue.c
#${MAC_DIR}/ue_procedures.c
#${MAC_DIR}/ra_procedures.c
${MAC_DIR}/l1_helpers.c
${MAC_DIR}/rar_tools.c
#${MAC_DIR}/rar_tools_ue.c
${MAC_DIR}/eNB_scheduler.c
${MAC_DIR}/eNB_scheduler_dlsch.c
${MAC_DIR}/eNB_scheduler_ulsch.c
${MAC_DIR}/eNB_scheduler_mch.c
${MAC_DIR}/eNB_scheduler_bch.c
${MAC_DIR}/eNB_scheduler_primitives.c
${MAC_DIR}/eNB_scheduler_RA.c
${MAC_DIR}/eNB_scheduler_fairRR.c
${MAC_DIR}/eNB_scheduler_phytest.c
${MAC_DIR}/pre_processor.c
${MAC_DIR}/slicing/slicing.c
${MAC_DIR}/config.c
${MAC_DIR}/config_ue.c
)
set (MAC_NR_SRC
${NR_PHY_INTERFACE_DIR}/NR_IF_Module.c
${NR_GNB_MAC_DIR}/main.c
${NR_GNB_MAC_DIR}/config.c
${NR_GNB_MAC_DIR}/gNB_scheduler.c
${NR_GNB_MAC_DIR}/gNB_scheduler_bch.c
${NR_GNB_MAC_DIR}/gNB_scheduler_dlsch.c
${NR_GNB_MAC_DIR}/gNB_scheduler_ulsch.c
${NR_GNB_MAC_DIR}/gNB_scheduler_primitives.c
${NR_GNB_MAC_DIR}/gNB_scheduler_phytest.c
${NR_GNB_MAC_DIR}/gNB_scheduler_uci.c
${NR_GNB_MAC_DIR}/gNB_scheduler_srs.c
${NR_GNB_MAC_DIR}/gNB_scheduler_RA.c
${NR_GNB_MAC_DIR}/mac_rrc_dl_handler.c
${NR_GNB_MAC_DIR}/mac_rrc_ul_direct.c
${NR_GNB_MAC_DIR}/mac_rrc_ul_f1ap.c
)
set (MAC_SRC_UE
${PHY_INTERFACE_DIR}/phy_stub_UE.c
${PHY_INTERFACE_DIR}/queue_t.c
${MAC_DIR}/main_ue.c
${MAC_DIR}/ue_procedures.c
${MAC_DIR}/ra_procedures.c
${MAC_DIR}/l1_helpers.c
${MAC_DIR}/rar_tools_ue.c
${MAC_DIR}/config_ue.c
)
set (MAC_NR_SRC_UE
${NR_UE_PHY_INTERFACE_DIR}/NR_IF_Module.c
${NR_UE_PHY_INTERFACE_DIR}/NR_Packet_Drop.c
${NR_UE_MAC_DIR}/config_ue.c
${NR_UE_MAC_DIR}/mac_vars.c
${NR_UE_MAC_DIR}/main_ue_nr.c
${NR_UE_MAC_DIR}/nr_ue_procedures.c
${NR_UE_MAC_DIR}/nr_ue_scheduler.c
${NR_UE_MAC_DIR}/nr_ue_dci_configuration.c
${NR_UE_MAC_DIR}/nr_ra_procedures.c
)
set (ENB_APP_SRC
${OPENAIR2_DIR}/ENB_APP/enb_app.c
${OPENAIR2_DIR}/ENB_APP/enb_config.c
${OPENAIR2_DIR}/ENB_APP/enb_config_SL.c
${OPENAIR2_DIR}/ENB_APP/enb_config_eMTC.c
${OPENAIR2_DIR}/ENB_APP/RRC_config_tools.c
)
set (GNB_APP_SRC
${OPENAIR2_DIR}/GNB_APP/gnb_app.c
${OPENAIR2_DIR}/E1AP/e1ap_setup.c
${OPENAIR2_DIR}/GNB_APP/gnb_config.c
)
set (MCE_APP_SRC
${OPENAIR2_DIR}/MCE_APP/mce_app.c
${OPENAIR2_DIR}/MCE_APP/mce_config.c
)
set (MISC_NFAPI_LTE
${OPENAIR1_DIR}/SCHED/nfapi_lte_dummy.c
)
add_library(MISC_NFAPI_LTE_LIB ${MISC_NFAPI_LTE})
set (MISC_NFAPI_NR
${OPENAIR1_DIR}/SCHED/nfapi_nr_dummy.c
)
add_library(MISC_NFAPI_NR_LIB ${MISC_NFAPI_NR})
add_library(L2
${L2_SRC}
${MAC_SRC}
${ENB_APP_SRC}
${MCE_APP_SRC}
)
target_link_libraries(L2 PRIVATE x2ap s1ap lte_rrc m2ap)
target_link_libraries(L2 PRIVATE asn1_lte_rrc_hdrs asn1_nr_rrc_hdrs)
add_library(MAC_NR ${MAC_NR_SRC})
target_link_libraries(MAC_NR PRIVATE asn1_lte_rrc_hdrs asn1_nr_rrc_hdrs)
add_library(MAC_UE_NR ${MAC_NR_SRC_UE})
target_link_libraries(MAC_UE_NR PRIVATE asn1_lte_rrc_hdrs asn1_nr_rrc_hdrs)
add_library(L2_LTE ${L2_LTE_SRC})
target_link_libraries(L2_LTE PRIVATE asn1_lte_rrc_hdrs asn1_nr_rrc_hdrs)
add_library(L2_NR
${L2_NR_SRC}
${MAC_NR_SRC}
${GNB_APP_SRC}
)
add_library(e1_if
${NR_RRC_DIR}/cucp_cuup_direct.c
${NR_RRC_DIR}/cucp_cuup_e1ap.c
)
target_link_libraries(e1_if PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs asn1_f1ap e1ap GTPV1U)
add_library(e1_pdcp_if
${OPENAIR2_DIR}/LAYER2/nr_pdcp/nr_pdcp_e1_api.c
)
target_link_libraries(e1_pdcp_if PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
target_link_libraries(L2_NR PRIVATE f1ap x2ap s1ap ngap nr_rrc e1ap)
add_library(L2_LTE_NR
${L2_RRC_SRC}
${MAC_SRC}
${ENB_APP_SRC}
${MCE_APP_SRC}
)
target_link_libraries(L2_LTE_NR PRIVATE f1ap s1ap nr_rrc)
add_library(L2_UE
${L2_SRC_UE}
${MAC_SRC_UE}
)
target_link_libraries(L2_UE PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
add_library(L2_UE_LTE_NR
${L2_RRC_SRC_UE}
${MAC_SRC_UE}
)
target_link_libraries(L2_UE_LTE_NR PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
if (NOT ${NOS1})
target_compile_definitions(L2_UE PUBLIC -DPDCP_USE_NETLINK)
endif()
target_link_libraries(L2_UE PRIVATE asn1_lte_rrc_hdrs)
add_library( NR_L2_UE ${NR_L2_SRC_UE} ${MAC_NR_SRC_UE} )
target_link_libraries(NR_L2_UE PRIVATE f1ap)
target_link_libraries(NR_L2_UE PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
add_library(MAC_NR_COMMON
${OPENAIR2_DIR}/LAYER2/NR_MAC_COMMON/nr_mac_common.c
${OPENAIR2_DIR}/LAYER2/NR_MAC_COMMON/nr_compute_tbs_common.c
)
target_link_libraries(MAC_NR_COMMON PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
include_directories("${OPENAIR2_DIR}/NR_UE_PHY_INTERFACE")
include_directories("${OPENAIR2_DIR}/LAYER2")
include_directories("${OPENAIR1_DIR}/SCHED_NR_UE")
#include_directories("${NFAPI_USER_DIR}"")
# L3 Libs
##########################
# CN libs
##########################
add_library (GTPV1U
${NR_RRC_DIR}/rrc_gNB_GTPV1U.c
${RRC_DIR}/rrc_eNB_GTPV1U.c
${OPENAIR3_DIR}/ocp-gtpu/gtp_itf.cpp
)
target_link_libraries(GTPV1U PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
target_link_libraries(GTPV1U PRIVATE SIMU)
include_directories(${OPENAIR3_DIR}/ocp-gtp)
set (MME_APP_SRC
${OPENAIR3_DIR}/MME_APP/mme_app.c
${OPENAIR3_DIR}/MME_APP/mme_config.c
)
add_library(MME_APP ${MME_APP_SRC})
target_link_libraries(MME_APP PRIVATE m2ap m3ap)
target_link_libraries(MME_APP PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
set(SCTP_SRC
${OPENAIR3_DIR}/SCTP/sctp_common.c
${OPENAIR3_DIR}/SCTP/sctp_eNB_task.c
${OPENAIR3_DIR}/SCTP/sctp_eNB_itti_messaging.c
)
add_library(SCTP_CLIENT ${SCTP_SRC})
target_link_libraries(SCTP_CLIENT PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
set(NAS_SRC ${OPENAIR3_DIR}/NAS/)
set(libnas_api_OBJS
${NAS_SRC}COMMON/API/NETWORK/as_message.c
${NAS_SRC}COMMON/API/NETWORK/nas_message.c
${NAS_SRC}COMMON/API/NETWORK/network_api.c
)
set(libnas_emm_msg_OBJS
${NAS_SRC}COMMON/EMM/MSG/AttachAccept.c
${NAS_SRC}COMMON/EMM/MSG/AttachComplete.c
${NAS_SRC}COMMON/EMM/MSG/AttachReject.c
${NAS_SRC}COMMON/EMM/MSG/AttachRequest.c
${NAS_SRC}COMMON/EMM/MSG/AuthenticationFailure.c
${NAS_SRC}COMMON/EMM/MSG/AuthenticationReject.c
${NAS_SRC}COMMON/EMM/MSG/AuthenticationRequest.c
${NAS_SRC}COMMON/EMM/MSG/AuthenticationResponse.c
${NAS_SRC}COMMON/EMM/MSG/CsServiceNotification.c
${NAS_SRC}COMMON/EMM/MSG/DetachAccept.c
${NAS_SRC}COMMON/EMM/MSG/DetachRequest.c
${NAS_SRC}COMMON/EMM/MSG/DownlinkNasTransport.c
${NAS_SRC}COMMON/EMM/MSG/EmmInformation.c
${NAS_SRC}COMMON/EMM/MSG/emm_msg.c
${NAS_SRC}COMMON/EMM/MSG/EmmStatus.c
${NAS_SRC}COMMON/EMM/MSG/ExtendedServiceRequest.c
${NAS_SRC}COMMON/EMM/MSG/GutiReallocationCommand.c
${NAS_SRC}COMMON/EMM/MSG/GutiReallocationComplete.c
${NAS_SRC}COMMON/EMM/MSG/IdentityRequest.c
${NAS_SRC}COMMON/EMM/MSG/IdentityResponse.c
${NAS_SRC}COMMON/EMM/MSG/SecurityModeCommand.c
${NAS_SRC}COMMON/EMM/MSG/SecurityModeComplete.c
${NAS_SRC}COMMON/EMM/MSG/SecurityModeReject.c
${NAS_SRC}COMMON/EMM/MSG/ServiceReject.c
${NAS_SRC}COMMON/EMM/MSG/ServiceRequest.c
${NAS_SRC}COMMON/EMM/MSG/TrackingAreaUpdateAccept.c
${NAS_SRC}COMMON/EMM/MSG/TrackingAreaUpdateComplete.c
${NAS_SRC}COMMON/EMM/MSG/TrackingAreaUpdateReject.c
${NAS_SRC}COMMON/EMM/MSG/TrackingAreaUpdateRequest.c
${NAS_SRC}COMMON/EMM/MSG/UplinkNasTransport.c
)
set(libnas_esm_msg_OBJS
${NAS_SRC}COMMON/ESM/MSG/ActivateDedicatedEpsBearerContextAccept.c
${NAS_SRC}COMMON/ESM/MSG/ActivateDedicatedEpsBearerContextReject.c
${NAS_SRC}COMMON/ESM/MSG/ActivateDedicatedEpsBearerContextRequest.c
${NAS_SRC}COMMON/ESM/MSG/ActivateDefaultEpsBearerContextAccept.c
${NAS_SRC}COMMON/ESM/MSG/ActivateDefaultEpsBearerContextReject.c
${NAS_SRC}COMMON/ESM/MSG/ActivateDefaultEpsBearerContextRequest.c
${NAS_SRC}COMMON/ESM/MSG/BearerResourceAllocationReject.c
${NAS_SRC}COMMON/ESM/MSG/BearerResourceAllocationRequest.c
${NAS_SRC}COMMON/ESM/MSG/BearerResourceModificationReject.c
${NAS_SRC}COMMON/ESM/MSG/BearerResourceModificationRequest.c
${NAS_SRC}COMMON/ESM/MSG/DeactivateEpsBearerContextAccept.c
${NAS_SRC}COMMON/ESM/MSG/DeactivateEpsBearerContextRequest.c
${NAS_SRC}COMMON/ESM/MSG/EsmInformationRequest.c
${NAS_SRC}COMMON/ESM/MSG/EsmInformationResponse.c
${NAS_SRC}COMMON/ESM/MSG/esm_msg.c
${NAS_SRC}COMMON/ESM/MSG/EsmStatus.c
${NAS_SRC}COMMON/ESM/MSG/ModifyEpsBearerContextAccept.c
${NAS_SRC}COMMON/ESM/MSG/ModifyEpsBearerContextReject.c
${NAS_SRC}COMMON/ESM/MSG/ModifyEpsBearerContextRequest.c
${NAS_SRC}COMMON/ESM/MSG/PdnConnectivityReject.c
${NAS_SRC}COMMON/ESM/MSG/PdnConnectivityRequest.c
${NAS_SRC}COMMON/ESM/MSG/PdnDisconnectReject.c
${NAS_SRC}COMMON/ESM/MSG/PdnDisconnectRequest.c
)
set(libnas_ies_OBJS
${NAS_SRC}COMMON/IES/AccessPointName.c
${NAS_SRC}COMMON/IES/AdditionalUpdateResult.c
${NAS_SRC}COMMON/IES/AdditionalUpdateType.c
${NAS_SRC}COMMON/IES/ApnAggregateMaximumBitRate.c
${NAS_SRC}COMMON/IES/AuthenticationFailureParameter.c
${NAS_SRC}COMMON/IES/AuthenticationParameterAutn.c
${NAS_SRC}COMMON/IES/AuthenticationParameterRand.c
${NAS_SRC}COMMON/IES/AuthenticationResponseParameter.c
${NAS_SRC}COMMON/IES/CipheringKeySequenceNumber.c
${NAS_SRC}COMMON/IES/Cli.c
${NAS_SRC}COMMON/IES/CsfbResponse.c
${NAS_SRC}COMMON/IES/DaylightSavingTime.c
${NAS_SRC}COMMON/IES/DetachType.c
${NAS_SRC}COMMON/IES/DrxParameter.c
${NAS_SRC}COMMON/IES/EmergencyNumberList.c
${NAS_SRC}COMMON/IES/EmmCause.c
${NAS_SRC}COMMON/IES/EpsAttachResult.c
${NAS_SRC}COMMON/IES/EpsAttachType.c
${NAS_SRC}COMMON/IES/EpsBearerContextStatus.c
${NAS_SRC}COMMON/IES/EpsBearerIdentity.c
${NAS_SRC}COMMON/IES/EpsMobileIdentity.c
${NAS_SRC}COMMON/IES/EpsNetworkFeatureSupport.c
${NAS_SRC}COMMON/IES/EpsQualityOfService.c
${NAS_SRC}COMMON/IES/EpsUpdateResult.c
${NAS_SRC}COMMON/IES/EpsUpdateType.c
${NAS_SRC}COMMON/IES/EsmCause.c
${NAS_SRC}COMMON/IES/EsmInformationTransferFlag.c
${NAS_SRC}COMMON/IES/EsmMessageContainer.c
${NAS_SRC}COMMON/IES/GprsTimer.c
${NAS_SRC}COMMON/IES/GutiType.c
${NAS_SRC}COMMON/IES/IdentityType2.c
${NAS_SRC}COMMON/IES/ImeisvRequest.c
${NAS_SRC}COMMON/IES/KsiAndSequenceNumber.c
${NAS_SRC}COMMON/IES/LcsClientIdentity.c
${NAS_SRC}COMMON/IES/LcsIndicator.c
${NAS_SRC}COMMON/IES/LinkedEpsBearerIdentity.c
${NAS_SRC}COMMON/IES/LlcServiceAccessPointIdentifier.c
${NAS_SRC}COMMON/IES/LocationAreaIdentification.c
${NAS_SRC}COMMON/IES/MessageType.c
${NAS_SRC}COMMON/IES/MobileIdentity.c
${NAS_SRC}COMMON/IES/MobileStationClassmark2.c
${NAS_SRC}COMMON/IES/MobileStationClassmark3.c
${NAS_SRC}COMMON/IES/MsNetworkCapability.c
${NAS_SRC}COMMON/IES/MsNetworkFeatureSupport.c
${NAS_SRC}COMMON/IES/NasKeySetIdentifier.c
${NAS_SRC}COMMON/IES/NasMessageContainer.c
${NAS_SRC}COMMON/IES/NasRequestType.c
${NAS_SRC}COMMON/IES/NasSecurityAlgorithms.c
${NAS_SRC}COMMON/IES/NetworkName.c
${NAS_SRC}COMMON/IES/Nonce.c
${NAS_SRC}COMMON/IES/PacketFlowIdentifier.c
${NAS_SRC}COMMON/IES/PagingIdentity.c
${NAS_SRC}COMMON/IES/PdnAddress.c
${NAS_SRC}COMMON/IES/PdnType.c
${NAS_SRC}COMMON/IES/PlmnList.c
${NAS_SRC}COMMON/IES/ProcedureTransactionIdentity.c
${NAS_SRC}COMMON/IES/ProtocolConfigurationOptions.c
${NAS_SRC}COMMON/IES/ProtocolDiscriminator.c
${NAS_SRC}COMMON/IES/PTmsiSignature.c
${NAS_SRC}COMMON/IES/QualityOfService.c
${NAS_SRC}COMMON/IES/RadioPriority.c
${NAS_SRC}COMMON/IES/SecurityHeaderType.c
${NAS_SRC}COMMON/IES/ServiceType.c
${NAS_SRC}COMMON/IES/ShortMac.c
${NAS_SRC}COMMON/IES/SsCode.c
${NAS_SRC}COMMON/IES/SupportedCodecList.c
${NAS_SRC}COMMON/IES/TimeZoneAndTime.c
${NAS_SRC}COMMON/IES/TimeZone.c
${NAS_SRC}COMMON/IES/TmsiStatus.c
${NAS_SRC}COMMON/IES/TrackingAreaIdentity.c
${NAS_SRC}COMMON/IES/TrackingAreaIdentityList.c
${NAS_SRC}COMMON/IES/TrafficFlowAggregateDescription.c
${NAS_SRC}COMMON/IES/TrafficFlowTemplate.c
${NAS_SRC}COMMON/IES/TransactionIdentifier.c
${NAS_SRC}COMMON/IES/UeNetworkCapability.c
${NAS_SRC}COMMON/IES/UeRadioCapabilityInformationUpdateNeeded.c
${NAS_SRC}COMMON/IES/UeSecurityCapability.c
${NAS_SRC}COMMON/IES/VoiceDomainPreferenceAndUeUsageSetting.c
)
set (libnas_utils_OBJS
${NAS_SRC}COMMON/UTIL/device.c
${NAS_SRC}COMMON/UTIL/memory.c
${NAS_SRC}COMMON/UTIL/nas_timer.c
${NAS_SRC}COMMON/UTIL/socket.c
${NAS_SRC}COMMON/UTIL/stty.c
${NAS_SRC}COMMON/UTIL/TLVEncoder.c
${NAS_SRC}COMMON/UTIL/TLVDecoder.c
${NAS_SRC}COMMON/UTIL/OctetString.c
)
set(libnas_ue_api_OBJS
${NAS_SRC}UE/API/USER/at_command.c
${NAS_SRC}UE/API/USER/at_error.c
${NAS_SRC}UE/API/USER/at_response.c
${NAS_SRC}UE/API/USER/user_api.c
${NAS_SRC}UE/API/USER/user_indication.c
${NAS_SRC}UE/API/USIM/aka_functions.c
${NAS_SRC}UE/API/USIM/usim_api.c
)
set(libnas_ue_emm_OBJS
${NAS_SRC}UE/EMM/Attach.c
${NAS_SRC}UE/EMM/Authentication.c
${NAS_SRC}UE/EMM/Detach.c
${NAS_SRC}UE/EMM/emm_main.c
${NAS_SRC}UE/EMM/EmmStatusHdl.c
${NAS_SRC}UE/EMM/Identification.c
${NAS_SRC}UE/EMM/IdleMode.c
${NAS_SRC}UE/EMM/LowerLayer.c
${NAS_SRC}UE/EMM/SecurityModeControl.c
${NAS_SRC}UE/EMM/ServiceRequestHdl.c
${NAS_SRC}UE/EMM/TrackingAreaUpdate.c
)
set(libnas_ue_emm_sap_OBJS
${NAS_SRC}UE/EMM/SAP/emm_as.c
${NAS_SRC}UE/EMM/SAP/EmmDeregisteredAttachNeeded.c
${NAS_SRC}UE/EMM/SAP/EmmDeregisteredAttemptingToAttach.c
${NAS_SRC}UE/EMM/SAP/EmmDeregistered.c
${NAS_SRC}UE/EMM/SAP/EmmDeregisteredInitiated.c
${NAS_SRC}UE/EMM/SAP/EmmDeregisteredLimitedService.c
${NAS_SRC}UE/EMM/SAP/EmmDeregisteredNoCellAvailable.c
${NAS_SRC}UE/EMM/SAP/EmmDeregisteredNoImsi.c
${NAS_SRC}UE/EMM/SAP/EmmDeregisteredNormalService.c
${NAS_SRC}UE/EMM/SAP/EmmDeregisteredPlmnSearch.c
${NAS_SRC}UE/EMM/SAP/emm_esm.c
${NAS_SRC}UE/EMM/SAP/emm_fsm.c
${NAS_SRC}UE/EMM/SAP/EmmNull.c
${NAS_SRC}UE/EMM/SAP/emm_recv.c
${NAS_SRC}UE/EMM/SAP/emm_reg.c
${NAS_SRC}UE/EMM/SAP/EmmRegisteredAttemptingToUpdate.c
${NAS_SRC}UE/EMM/SAP/EmmRegistered.c
${NAS_SRC}UE/EMM/SAP/EmmRegisteredImsiDetachInitiated.c
${NAS_SRC}UE/EMM/SAP/EmmRegisteredInitiated.c
${NAS_SRC}UE/EMM/SAP/EmmRegisteredLimitedService.c
${NAS_SRC}UE/EMM/SAP/EmmRegisteredNoCellAvailable.c
${NAS_SRC}UE/EMM/SAP/EmmRegisteredNormalService.c
${NAS_SRC}UE/EMM/SAP/EmmRegisteredPlmnSearch.c
${NAS_SRC}UE/EMM/SAP/EmmRegisteredUpdateNeeded.c
${NAS_SRC}UE/EMM/SAP/emm_sap.c
${NAS_SRC}UE/EMM/SAP/emm_send.c
${NAS_SRC}UE/EMM/SAP/EmmServiceRequestInitiated.c
${NAS_SRC}UE/EMM/SAP/EmmTrackingAreaUpdatingInitiated.c
)
set (libnas_ue_esm_OBJS
${NAS_SRC}UE/ESM/DedicatedEpsBearerContextActivation.c
${NAS_SRC}UE/ESM/DefaultEpsBearerContextActivation.c
${NAS_SRC}UE/ESM/EpsBearerContextDeactivation.c
${NAS_SRC}UE/ESM/esm_ebr.c
${NAS_SRC}UE/ESM/esm_ebr_context.c
${NAS_SRC}UE/ESM/esm_ip.c
${NAS_SRC}UE/ESM/esm_main.c
${NAS_SRC}UE/ESM/esm_pt.c
${NAS_SRC}UE/ESM/EsmStatusHdl.c
${NAS_SRC}UE/ESM/PdnConnectivity.c
${NAS_SRC}UE/ESM/PdnDisconnect.c
)
set(libnas_ue_esm_sap_OBJS
${NAS_SRC}UE/ESM/SAP/esm_recv.c
${NAS_SRC}UE/ESM/SAP/esm_send.c
${NAS_SRC}UE/ESM/SAP/esm_sap.c
)
set(libnrnas_emm_msg_OBJS
${NAS_SRC}COMMON/EMM/MSG/RegistrationRequest.c
${NAS_SRC}COMMON/EMM/MSG/RegistrationAccept.c
${NAS_SRC}COMMON/EMM/MSG/FGSIdentityResponse.c
${NAS_SRC}COMMON/EMM/MSG/FGSAuthenticationResponse.c
${NAS_SRC}COMMON/EMM/MSG/FGSNASSecurityModeComplete.c
${NAS_SRC}COMMON/EMM/MSG/RegistrationComplete.c
${NAS_SRC}COMMON/EMM/MSG/FGSUplinkNasTransport.c
${NAS_SRC}COMMON/ESM/MSG/PduSessionEstablishRequest.c
${NAS_SRC}COMMON/ESM/MSG/PduSessionEstablishmentAccept.c
)
set(libnrnas_ies_OBJS
${NAS_SRC}COMMON/IES/ExtendedProtocolDiscriminator.c
${NAS_SRC}COMMON/IES/FGSMobileIdentity.c
${NAS_SRC}COMMON/IES/FGSRegistrationType.c
${NAS_SRC}COMMON/IES/SpareHalfOctet.c
${NAS_SRC}COMMON/IES/FGSRegistrationResult.c
${NAS_SRC}COMMON/IES/FGMMCapability.c
${NAS_SRC}COMMON/IES/NrUESecurityCapability.c
${NAS_SRC}COMMON/IES/FGCNasMessageContainer.c
${NAS_SRC}COMMON/IES/SORTransparentContainer.c
)
add_library(LIB_NAS_SIMUE
${NAS_SRC}UE/nas_itti_messaging.c
${NAS_SRC}UE/nas_network.c
${NAS_SRC}UE/nas_parser.c
${NAS_SRC}UE/nas_proc.c
${NAS_SRC}UE/nas_user.c
${NAS_SRC}NR_UE/nr_nas_msg_sim.c
${libnas_api_OBJS}
${libnas_ue_api_OBJS}
${libnas_emm_msg_OBJS}
${libnas_esm_msg_OBJS}
${libnas_ies_OBJS}
${libnas_utils_OBJS}
${libnas_ue_emm_OBJS}
${libnas_ue_emm_sap_OBJS}
${libnas_ue_esm_OBJS}
${libnas_ue_esm_sap_OBJS}
${libnrnas_emm_msg_OBJS}
${libnrnas_ies_OBJS}
$<TARGET_OBJECTS:ds>
)
target_include_directories(LIB_NAS_SIMUE PRIVATE ${OPENAIR_DIR}/common/utils/ds/)
target_link_libraries(LIB_NAS_SIMUE PRIVATE lte_rrc)
set(NAS_SIM_LIB LIB_NAS_SIMUE)
target_link_libraries(LIB_NAS_SIMUE PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
add_library(LIB_NAS_UE
${NAS_SRC}UE/nas_itti_messaging.c
${NAS_SRC}UE/nas_network.c
${NAS_SRC}UE/nas_parser.c
${NAS_SRC}UE/nas_proc.c
${NAS_SRC}UE/nas_user.c
${libnas_api_OBJS}
${libnas_ue_api_OBJS}
${libnas_emm_msg_OBJS}
${libnas_esm_msg_OBJS}
${libnas_ies_OBJS}
${libnas_utils_OBJS}
${libnas_ue_emm_OBJS}
${libnas_ue_emm_sap_OBJS}
${libnas_ue_esm_OBJS}
${libnas_ue_esm_sap_OBJS}
$<TARGET_OBJECTS:ds>
)
target_include_directories(LIB_NAS_UE PRIVATE ${OPENAIR_DIR}/common/utils/ds/)
set(NAS_UE_LIB LIB_NAS_UE)
target_link_libraries(LIB_NAS_UE PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
include_directories(${NAS_SRC}NR_UE)
include_directories(${NAS_SRC}UE)
include_directories(${NAS_SRC}UE/API/USER)
include_directories(${NAS_SRC}UE/API/USIM)
include_directories(${NAS_SRC}UE/EMM)
include_directories(${NAS_SRC}UE/EMM/SAP)
include_directories(${NAS_SRC}UE/ESM)
include_directories(${NAS_SRC}UE/ESM/SAP)
# nbiot
add_definitions("-DNUMBER_OF_UE_MAX_NB_IoT=16")
set (NBIOT_SOURCES
${OPENAIR2_DIR}/ENB_APP/NB_IoT_config.c
)
add_library(NB_IoT MODULE ${NBIOT_SOURCES} )
# shared library loader
set (SHLIB_LOADER_SOURCES
${OPENAIR_DIR}/common/utils/load_module_shlib.c
)
add_library(LIB_5GNAS_GNB
${NAS_SRC}/COMMON/nr_common.c
${NAS_SRC}/gNB/network_process_nas.c
${NAS_SRC}/NR_UE/ue_process_nas.c
${OPENAIR3_DIR}//UICC/usim_interface.c
)
target_include_directories(LIB_5GNAS_GNB PRIVATE ${OPENAIR_DIR}/common/utils/ds/)
target_link_libraries(LIB_5GNAS_GNB PRIVATE SECU_CN ${CRYPTO_LIBRARIES})
target_link_libraries(LIB_5GNAS_GNB PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
# Simulation library
##########################
set (SIMUSRC
${OPENAIR1_DIR}/SIMULATION/TOOLS/taus.c
${OPENAIR1_DIR}/SIMULATION/TOOLS/multipath_channel.c
${OPENAIR1_DIR}/SIMULATION/TOOLS/multipath_tv_channel.c
${OPENAIR1_DIR}/SIMULATION/TOOLS/abstraction.c
${OPENAIR1_DIR}/SIMULATION/TOOLS/channel_sim.c
${OPENAIR1_DIR}/SIMULATION/TOOLS/random_channel.c
${OPENAIR1_DIR}/SIMULATION/TOOLS/rangen_double.c
${OPENAIR1_DIR}/SIMULATION/TOOLS/phase_noise.c
${OPENAIR1_DIR}/SIMULATION/RF/rf.c
${OPENAIR1_DIR}/SIMULATION/RF/dac.c
${OPENAIR1_DIR}/SIMULATION/RF/adc.c
)
add_library(SIMU STATIC ${SIMUSRC} )
target_include_directories(SIMU PUBLIC ${OPENAIR1_DIR}/SIMULATION/TOOLS ${OPENAIR1_DIR}/SIMULATION/RF)
# Qt-based scope
add_boolean_option(ENABLE_NRQTSCOPE OFF "Build the Qt-Scope" OFF)
if (ENABLE_NRQTSCOPE)
find_package(Qt5 REQUIRED COMPONENTS Widgets Charts)
message ("Qt5 Widgets and Charts found for nrqtscope")
set(QTSCOPE_SOURCE_NR ${OPENAIR1_DIR}/PHY/TOOLS/nr_phy_qt_scope.cpp)
# Creates rules for calling the Meta-Object Compiler (moc) on the given source files
qt5_wrap_cpp(QTSCOPE_SOURCE_NR ${OPENAIR1_DIR}/PHY/TOOLS/nr_phy_qt_scope.h)
add_library(nrqtscope MODULE ${QTSCOPE_SOURCE_NR})
target_link_libraries(nrqtscope PRIVATE Qt5::Widgets Qt5::Charts)
target_link_libraries(nrqtscope PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
endif()
add_library(SIMU_ETH STATIC
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/netlink_init.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/multicast_link.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/socket.c
)
target_link_libraries(SIMU_ETH PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
include_directories("${NFAPI_DIR}/nfapi/public_inc")
include_directories("${NFAPI_DIR}/common/public_inc")
include_directories("${NFAPI_DIR}/pnf/public_inc")
include_directories("${NFAPI_DIR}/nfapi/inc")
include_directories("${NFAPI_DIR}/sim_common/inc")
include_directories("${NFAPI_DIR}/pnf_sim/inc")
list(APPEND ATLAS_LIBRARIES lapack lapacke)
add_library(rfsimulator MODULE
${OPENAIR_DIR}/radio/rfsimulator/simulator.c
${OPENAIR_DIR}/radio/rfsimulator/apply_channelmod.c
${OPENAIR1_DIR}/PHY/TOOLS/signal_energy.c
)
target_link_libraries(rfsimulator PRIVATE SIMU ${ATLAS_LIBRARIES})
add_library(oai_iqplayer MODULE
${OPENAIR_DIR}/radio/iqplayer/iqplayer_lib.c
)
set(CMAKE_MODULE_PATH "${OPENAIR_DIR}/cmake_targets/tools/MODULES" "${CMAKE_MODULE_PATH}")
#include T directory even if the T is off because T macros are in the code
#no matter what
include_directories("${OPENAIR_DIR}/common/utils/T")
if (${T_TRACER})
set(T_SOURCE
${OPENAIR_DIR}/common/utils/T/T_IDs.h
${OPENAIR_DIR}/common/utils/T/T.c
${OPENAIR_DIR}/common/utils/T/local_tracer.c)
set(T_LIB "rt")
endif (${T_TRACER})
#Some files in the T directory are generated.
#This rule and the following deal with it.
add_custom_command (
OUTPUT ${OPENAIR_DIR}/common/utils/T/T_IDs.h
COMMAND make check_vcd
WORKING_DIRECTORY ${OPENAIR_DIR}/common/utils/T
DEPENDS ${OPENAIR_DIR}/common/utils/T/T_messages.txt
${OPENAIR_DIR}/common/utils/LOG/vcd_signal_dumper.c
${OPENAIR_DIR}/common/utils/LOG/vcd_signal_dumper.h
)
execute_process (
COMMAND make check_vcd
WORKING_DIRECTORY ${OPENAIR_DIR}/common/utils/T
)
#This rule is specifically needed to generate T files
#before anything else in a project that uses the T.
#See below, there are some 'add_dependencies' showing that.
#Basically we create a custom target and we make other
#targets depend on it. That forces cmake to generate
#T files before anything else.
add_custom_target (
generate_T
DEPENDS ${OPENAIR_DIR}/common/utils/T/T_IDs.h
)
# Hack on a test of asn1c version (already dirty)
add_definitions(-DASN1_MINIMUM_VERSION=924)
#################################
# add executables for operation
#################################
add_library(minimal_lib
${OPENAIR_DIR}/common/utils/LOG/log.c
${OPENAIR_DIR}/common/utils/minimal_stub.c
${T_SOURCE}
)
target_link_libraries(minimal_lib pthread dl ${T_LIB} CONFIG_LIB)
add_executable(nfapi_test
${OPENAIR_DIR}/openair2/NR_PHY_INTERFACE/nfapi_5g_test.c
)
add_executable(replay_node
${OPENAIR_DIR}/radio/rfsimulator/stored_node.c
)
target_link_libraries (replay_node minimal_lib)
add_executable(measurement_display
${OPENAIR_DIR}/common/utils/threadPool/measurement_display.c)
target_link_libraries (measurement_display minimal_lib)
add_executable(test5Gnas
${OPENAIR_DIR}/openair3/TEST/test5Gnas.c
)
target_link_libraries (test5Gnas LIB_5GNAS_GNB CONFIG_LIB minimal_lib )
# lte-softmodem is both eNB and UE implementation
###################################################
add_executable(lte-softmodem
${OPENAIR_DIR}/executables/lte-enb.c
${OPENAIR_DIR}/executables/lte-ru.c
${OPENAIR_DIR}/executables/ru_control.c
${OPENAIR_DIR}/executables/lte-softmodem.c
${OPENAIR_DIR}/executables/softmodem-common.c
${OPENAIR2_DIR}/ENB_APP/NB_IoT_interface.c
${OPENAIR_DIR}/executables/create_tasks.c
${OPENAIR_DIR}/executables/create_tasks_mbms.c
${OPENAIR_DIR}/radio/COMMON/common_lib.c
${OPENAIR_DIR}/radio/COMMON/record_player.c
${OPENAIR2_DIR}/RRC/NAS/nas_config.c
${OPENAIR2_DIR}/RRC/NAS/rb_config.c
${OPENAIR3_DIR}/NAS/UE/nas_ue_task.c
${PHY_INTERFACE_DIR}/queue_t.c
${OPENAIR_DIR}/common/utils/lte/ue_power.c
${OPENAIR_DIR}/common/utils/lte/prach_utils.c
${OPENAIR1_DIR}/PHY/TOOLS/phy_scope_interface.c
${T_SOURCE}
${SHLIB_LOADER_SOURCES}
)
add_dependencies(lte-softmodem oai_iqplayer)
target_link_libraries(lte-softmodem PRIVATE
-Wl,--start-group
lte_rrc nr_rrc s1ap m2ap x2ap m3ap GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT MME_APP SCHED_LIB SCHED_RU_LIB
PHY_COMMON PHY PHY_RU L2 L2_LTE NFAPI_COMMON_LIB NFAPI_LIB NFAPI_VNF_LIB NFAPI_PNF_LIB NFAPI_USER_LIB MISC_NFAPI_LTE_LIB
${NAS_UE_LIB} ITTI SIMU SIMU_ETH
-Wl,--end-group z dl)
target_link_libraries(lte-softmodem PRIVATE ${LIBXML2_LIBRARIES})
target_link_libraries(lte-softmodem PRIVATE pthread m CONFIG_LIB rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} sctp)
target_link_libraries(lte-softmodem PRIVATE ${T_LIB})
target_link_libraries(lte-softmodem PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
add_executable(oairu
${OPENAIR_DIR}/executables/lte-ru.c
${OPENAIR_DIR}/executables/ru_control.c
${OPENAIR_DIR}/radio/COMMON/common_lib.c
${OPENAIR_DIR}/radio/COMMON/record_player.c
${OPENAIR_DIR}/executables/softmodem-common.c
${OPENAIR_DIR}/openair1/SCHED/phy_procedures_lte_common.c
${OPENAIR_DIR}/executables/main_ru.c
${T_SOURCE}
${OPENAIR_DIR}/common/utils/lte/prach_utils.c
${SHLIB_LOADER_SOURCES}
)
target_link_libraries(oairu PRIVATE
-Wl,--start-group
SCHED_RU_LIB
PHY_COMMON PHY_RU UTIL
-Wl,--end-group z dl)
target_link_libraries(oairu PRIVATE pthread m CONFIG_LIB rt ${T_LIB})
target_link_libraries(oairu PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
# force the generation of ASN.1 so that we don't need to wait during the build
target_link_libraries(lte-softmodem PRIVATE
asn1_lte_rrc asn1_s1ap asn1_m2ap asn1_m3ap asn1_x2ap)
# lte-uesoftmodem is UE implementation
#######################################
add_executable(lte-uesoftmodem
${OPENAIR_DIR}/executables/lte-ue.c
${OPENAIR_DIR}/executables/lte-uesoftmodem.c
${OPENAIR_DIR}/executables/softmodem-common.c
${OPENAIR_DIR}/executables/create_tasks_ue.c
${OPENAIR_DIR}/radio/COMMON/common_lib.c
${OPENAIR_DIR}/radio/COMMON/record_player.c
${OPENAIR2_DIR}/RRC/NAS/nas_config.c
${OPENAIR2_DIR}/RRC/NAS/rb_config.c
${OPENAIR3_DIR}/NAS/UE/nas_ue_task.c
${OPENAIR_DIR}/common/utils/lte/ue_power.c
${OPENAIR_DIR}/common/utils/lte/prach_utils.c
${OPENAIR1_DIR}/PHY/TOOLS/phy_scope_interface.c
${T_SOURCE}
${SHLIB_LOADER_SOURCES}
)
if (NOT ${NOS1})
target_compile_definitions(lte-uesoftmodem PRIVATE -DPDCP_USE_NETLINK)
endif()
target_link_libraries(lte-uesoftmodem PRIVATE
-Wl,--start-group
lte_rrc nr_rrc s1ap x2ap m2ap m3ap
SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT MME_APP SCHED_RU_LIB SCHED_UE_LIB PHY_COMMON
PHY_UE PHY_RU L2_UE L2_LTE SIMU SIMU_ETH NFAPI_COMMON_LIB NFAPI_LIB NFAPI_PNF_LIB NFAPI_USER_LIB MISC_NFAPI_LTE_LIB
${NAS_UE_LIB} ITTI ${ATLAS_LIBRARIES}
-Wl,--end-group z dl)
target_link_libraries(lte-uesoftmodem PRIVATE ${LIBXML2_LIBRARIES})
target_link_libraries(lte-uesoftmodem PRIVATE pthread m CONFIG_LIB rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} sctp ${ATLAS_LIBRARIES})
target_link_libraries(lte-uesoftmodem PRIVATE ${T_LIB})
target_link_libraries(lte-uesoftmodem PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
# force the generation of ASN.1 so that we don't need to wait during the build
target_link_libraries(lte-uesoftmodem PRIVATE
asn1_lte_rrc asn1_s1ap asn1_m2ap asn1_m3ap asn1_x2ap)
# nr-softmodem
###################################################
add_executable(nr-softmodem
${rrc_h}
${nr_rrc_h}
${s1ap_h}
# ${OPENAIR_BIN_DIR}/messages_xml.h
${OPENAIR_DIR}/executables/nr-gnb.c
${OPENAIR_DIR}/executables/nr-ru.c
${OPENAIR_DIR}/executables/nr-softmodem.c
${OPENAIR_DIR}/executables/softmodem-common.c
${OPENAIR_DIR}/radio/COMMON/common_lib.c
${OPENAIR_DIR}/radio/COMMON/record_player.c
${OPENAIR2_DIR}/RRC/NAS/nas_config.c
${OPENAIR2_DIR}/RRC/NAS/rb_config.c
${OPENAIR_DIR}/common/utils/lte/ue_power.c
${OPENAIR_DIR}/common/utils/lte/prach_utils.c
${OPENAIR_DIR}/common/utils/nr/nr_common.c
${PHY_INTERFACE_DIR}/queue_t.c
${OPENAIR1_DIR}/PHY/TOOLS/phy_scope_interface.c
${T_SOURCE}
${SHLIB_LOADER_SOURCES}
)
target_link_libraries(nr-softmodem PRIVATE
-Wl,--start-group
UTIL HASHTABLE SCTP_CLIENT SCHED_LIB SCHED_RU_LIB SCHED_NR_LIB PHY_NR PHY PHY_COMMON PHY_NR_COMMON PHY_RU GTPV1U SECU_CN SECU_OSA
ITTI ${NAS_UE_LIB} lte_rrc nr_rrc
ngap s1ap L2_LTE_NR L2_NR MAC_NR_COMMON NFAPI_COMMON_LIB NFAPI_LIB NFAPI_VNF_LIB NFAPI_PNF_LIB NFAPI_USER_LIB SIMU SIMU_ETH
x2ap f1ap m2ap m3ap e1ap
-Wl,--end-group z dl)
target_link_libraries(nr-softmodem PRIVATE ${LIBXML2_LIBRARIES})
target_link_libraries(nr-softmodem PRIVATE pthread m CONFIG_LIB rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} sctp ${ATLAS_LIBRARIES})
target_link_libraries(nr-softmodem PRIVATE ${T_LIB})
target_link_libraries(nr-softmodem PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
add_dependencies(nr-softmodem ldpc_orig ldpc_optim ldpc_optim8seg ldpc)
if (ENABLE_LDPC_T1)
add_dependencies(nr-softmodem ldpc_t1)
endif()
# force the generation of ASN.1 so that we don't need to wait during the build
target_link_libraries(nr-softmodem PRIVATE
asn1_lte_rrc asn1_nr_rrc asn1_s1ap asn1_ngap asn1_m2ap asn1_m3ap asn1_x2ap asn1_f1ap asn1_lpp)
add_executable(nr-cuup
executables/nr-cuup.c
executables/softmodem-common.c
${OPENAIR2_DIR}/RRC/NAS/nas_config.c
${NR_RRC_DIR}/rrc_gNB_UE_context.c
${OPENAIR2_DIR}/E1AP/e1ap_setup.c
${NR_PDCP_SRC}
${NR_SDAP_SRC}
${T_SOURCE}
${SHLIB_LOADER_SOURCES}
)
target_link_libraries(nr-cuup PRIVATE
CONFIG_LIB ITTI SCTP_CLIENT
GTPV1U e1ap e1_pdcp_if f1ap SIMU_ETH
SECU_OSA SECU_CN ${OPENSSL_LIBRARIES} crypt z sctp dl pthread)
target_link_libraries(nr-cuup PRIVATE asn1_lte_rrc_hdrs asn1_nr_rrc_hdrs)
# nr-uesoftmodem is UE implementation
#######################################
add_executable(nr-uesoftmodem
${rrc_h}
${s1ap_h}
# ${OPENAIR_BIN_DIR}/messages_xml.h
${OPENAIR_DIR}/executables/nr-uesoftmodem.c
${OPENAIR_DIR}/executables/nr-ue.c
${OPENAIR_DIR}/executables/softmodem-common.c
${OPENAIR_DIR}/radio/COMMON/common_lib.c
${OPENAIR_DIR}/radio/COMMON/record_player.c
${OPENAIR2_DIR}/RRC/NAS/nas_config.c
${OPENAIR2_DIR}/LAYER2/NR_MAC_COMMON/nr_mac_common.c
${OPENAIR2_DIR}/RRC/NAS/rb_config.c
${OPENAIR3_DIR}/NAS/UE/nas_ue_task.c
${OPENAIR_DIR}/common/utils/nr/nr_common.c
${OPENAIR1_DIR}/PHY/TOOLS/phy_scope_interface.c
${T_SOURCE}
${SHLIB_LOADER_SOURCES}
)
target_link_libraries(nr-uesoftmodem PRIVATE
-Wl,--start-group
nr_rrc SECU_CN SECU_OSA UTIL HASHTABLE SCHED_RU_LIB SCHED_NR_UE_LIB
PHY_COMMON PHY_NR_COMMON PHY_NR_UE NR_L2_UE L2_UE_LTE_NR MAC_NR_COMMON NFAPI_COMMON_LIB NFAPI_LIB NFAPI_PNF_LIB
NFAPI_USER_LIB MISC_NFAPI_NR_LIB
ITTI ${ATLAS_LIBRARIES} LIB_5GNAS_GNB LIB_NAS_SIMUE ${NAS_SIM_LIB} SIMU SIMU_ETH
-Wl,--end-group z dl)
target_link_libraries(nr-uesoftmodem PRIVATE ${LIBXML2_LIBRARIES})
target_link_libraries(nr-uesoftmodem PRIVATE pthread m CONFIG_LIB rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${ATLAS_LIBRARIES})
target_link_libraries(nr-uesoftmodem PRIVATE ${T_LIB})
target_link_libraries(nr-uesoftmodem PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
add_dependencies( nr-uesoftmodem ldpc_orig ldpc_optim ldpc_optim8seg ldpc )
if (ENABLE_LDPC_CUDA)
add_dependencies(nr-uesoftmodem ldpc_cuda)
add_dependencies(nr-softmodem ldpc_cuda)
endif()
# force the generation of ASN.1 so that we don't need to wait during the build
target_link_libraries(nr-uesoftmodem PRIVATE
asn1_lte_rrc asn1_nr_rrc asn1_s1ap asn1_ngap asn1_m2ap asn1_m3ap asn1_x2ap asn1_f1ap asn1_lpp)
###################################"
# Addexecutables for tests
####################################
# Unitary tests for each piece of L1: example, mbmssim is MBMS L1 simulator
#####################################
#special case for dlim TM4, which uses its own version of phy_scope code
add_executable(dlsim_tm4
${OPENAIR1_DIR}/SIMULATION/LTE_PHY/dlsim_tm4.c
${OPENAIR1_DIR}/PHY/TOOLS/lte_phy_scope_tm4.c
${T_SOURCE}
)
target_link_libraries (dlsim_tm4
-Wl,--start-group SIMU UTIL SCHED_LIB SCHED_RU_LIB PHY ITTI -Wl,--end-group
pthread m rt CONFIG_LIB ${ATLAS_LIBRARIES} ${T_LIB}
)
add_executable(rftest
${OPENAIR_DIR}/openair1/PHY/TOOLS/calibration_test.c
${OPENAIR_DIR}/openair1/PHY/TOOLS/calibration_scope.c
${OPENAIR_DIR}/radio/COMMON/common_lib.c
${OPENAIR_DIR}/executables/softmodem-common.c
${SHLIB_LOADER_SOURCES}
)
target_link_libraries(rftest PRIVATE minimal_lib CONFIG_LIB PHY_NR_COMMON UTIL pthread dl m ${T_LIB} )
target_link_libraries(rftest PRIVATE asn1_lte_rrc_hdrs asn1_nr_rrc_hdrs)
add_executable(polartest
${OPENAIR1_DIR}/PHY/CODING/TESTBENCH/polartest.c
${OPENAIR_DIR}/common/utils/nr/nr_common.c
${T_SOURCE}
${SHLIB_LOADER_SOURCES}
)
target_link_libraries(polartest PRIVATE
-Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR PHY_NR_COMMON PHY_NR_UE CONFIG_LIB -Wl,--end-group
m pthread ${ATLAS_LIBRARIES} dl
)
add_executable(smallblocktest
${OPENAIR1_DIR}/PHY/CODING/TESTBENCH/smallblocktest.c
${OPENAIR_DIR}/common/utils/nr/nr_common.c
${T_SOURCE}
${SHLIB_LOADER_SOURCES}
)
target_link_libraries(smallblocktest PRIVATE
-Wl,--start-group UTIL SIMU PHY_NR PHY_COMMON PHY_NR_COMMON CONFIG_LIB -Wl,--end-group
m pthread ${ATLAS_LIBRARIES} dl
)
add_executable(ldpctest
${PHY_NR_CODINGIF}
${OPENAIR1_DIR}/PHY/CODING/TESTBENCH/ldpctest.c
${T_SOURCE}
${SHLIB_LOADER_SOURCES}
)
add_dependencies( ldpctest ldpc_orig ldpc_optim ldpc_optim8seg ldpc )
if (ENABLE_LDPC_CUDA)
add_dependencies(ldpctest ldpc_cuda)
endif()
target_link_libraries(ldpctest PRIVATE
-Wl,--start-group UTIL SIMU PHY_NR PHY_COMMON PHY_NR_COMMON CONFIG_LIB -Wl,--end-group
m pthread ${ATLAS_LIBRARIES} dl
)
add_executable(nr_dlschsim
${OPENAIR1_DIR}/SIMULATION/NR_PHY/dlschsim.c
${OPENAIR1_DIR}/SIMULATION/NR_PHY/nr_dummy_functions.c
${OPENAIR_DIR}/common/utils/nr/nr_common.c
${T_SOURCE}
${SHLIB_LOADER_SOURCES}
)
target_link_libraries(nr_dlschsim PRIVATE
-Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
m pthread ${ATLAS_LIBRARIES} ${T_LIB} ITTI dl
)
target_link_libraries(nr_dlschsim PRIVATE asn1_nr_rrc_hdrs)
add_executable(nr_pbchsim
${OPENAIR1_DIR}/SIMULATION/NR_PHY/pbchsim.c
${OPENAIR1_DIR}/SIMULATION/NR_PHY/nr_dummy_functions.c
${OPENAIR_DIR}/common/utils/nr/nr_common.c
${T_SOURCE}
${SHLIB_LOADER_SOURCES}
)
target_link_libraries(nr_pbchsim PRIVATE
-Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
m pthread ${ATLAS_LIBRARIES} ${T_LIB} ITTI dl
)
target_link_libraries(nr_pbchsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
#PUCCH ---> Prashanth
add_executable(nr_pucchsim
${OPENAIR1_DIR}/SIMULATION/NR_PHY/pucchsim.c
${OPENAIR1_DIR}/SIMULATION/NR_PHY/nr_dummy_functions.c
${OPENAIR_DIR}/common/utils/nr/nr_common.c
${T_SOURCE}
${SHLIB_LOADER_SOURCES}
)
target_link_libraries(nr_pucchsim PRIVATE
-Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
m pthread ${ATLAS_LIBRARIES} ${T_LIB} ITTI dl
)
target_link_libraries(nr_pucchsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
add_executable(nr_dlsim
${OPENAIR1_DIR}/SIMULATION/NR_PHY/dlsim.c
${OPENAIR1_DIR}/SIMULATION/NR_PHY/nr_dummy_functions.c
${OPENAIR_DIR}/common/utils/nr/nr_common.c
${OPENAIR_DIR}/executables/softmodem-common.c
${OPENAIR2_DIR}/RRC/NAS/nas_config.c
${NR_UE_RRC_DIR}/rrc_nsa.c
${NFAPI_USER_DIR}/nfapi.c
${NFAPI_USER_DIR}/gnb_ind_vars.c
${PHY_INTERFACE_DIR}/queue_t.c
${T_SOURCE}
${SHLIB_LOADER_SOURCES}
)
target_link_libraries(nr_dlsim PRIVATE
-Wl,--start-group UTIL SIMU SIMU_ETH PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_NR MAC_UE_NR MAC_NR_COMMON nr_rrc CONFIG_LIB L2_NR HASHTABLE x2ap SECU_CN ngap -lz -Wl,--end-group
m pthread ${ATLAS_LIBRARIES} ${T_LIB} ITTI ${OPENSSL_LIBRARIES} dl
)
target_link_libraries(nr_dlsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
add_executable(nr_prachsim
${OPENAIR1_DIR}/SIMULATION/NR_PHY/prachsim.c
${OPENAIR1_DIR}/SIMULATION/NR_PHY/nr_dummy_functions.c
${OPENAIR_DIR}/common/utils/nr/nr_common.c
${T_SOURCE}
${SHLIB_LOADER_SOURCES})
target_link_libraries(nr_prachsim PRIVATE
-Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_RU PHY_NR_UE MAC_NR_COMMON SCHED_NR_LIB CONFIG_LIB -lz -Wl,--end-group
m pthread ${ATLAS_LIBRARIES} ${T_LIB} ITTI ${OPENSSL_LIBRARIES} dl)
target_link_libraries(nr_prachsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
add_executable(nr_ulschsim
${OPENAIR1_DIR}/SIMULATION/NR_PHY/ulschsim.c
${OPENAIR1_DIR}/SIMULATION/NR_PHY/nr_dummy_functions.c
${OPENAIR_DIR}/common/utils/nr/nr_common.c
${PHY_INTERFACE_DIR}/queue_t.c
${T_SOURCE}
${SHLIB_LOADER_SOURCES}
)
target_link_libraries(nr_ulschsim PRIVATE
-Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
m pthread ${ATLAS_LIBRARIES} ${T_LIB} ITTI dl
)
target_link_libraries(nr_ulschsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
add_executable(nr_ulsim
${OPENAIR1_DIR}/SIMULATION/NR_PHY/ulsim.c
${OPENAIR1_DIR}/SIMULATION/NR_PHY/nr_dummy_functions.c
${OPENAIR_DIR}/common/utils/nr/nr_common.c
${OPENAIR_DIR}/executables/softmodem-common.c
${OPENAIR2_DIR}/RRC/NAS/nas_config.c
${NR_UE_RRC_DIR}/rrc_nsa.c
${NFAPI_USER_DIR}/nfapi.c
${NFAPI_USER_DIR}/gnb_ind_vars.c
${PHY_INTERFACE_DIR}/queue_t.c
${T_SOURCE}
${SHLIB_LOADER_SOURCES}
)
if (ENABLE_LDPC_T1)
add_dependencies(nr_ulsim ldpc_t1)
endif()
target_link_libraries(nr_ulsim PRIVATE
-Wl,--start-group UTIL SIMU SIMU_ETH PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_NR MAC_UE_NR MAC_NR_COMMON nr_rrc CONFIG_LIB L2_NR HASHTABLE x2ap SECU_CN ngap -lz -Wl,--end-group
m pthread ${ATLAS_LIBRARIES} ${T_LIB} ITTI ${OPENSSL_LIBRARIES} dl
)
target_link_libraries(nr_ulsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
foreach(myExe dlsim dlsim_tm7 ulsim pbchsim scansim mbmssim pdcchsim pucchsim prachsim syncsim)
add_executable(${myExe}
${OPENAIR1_DIR}/SIMULATION/LTE_PHY/${myExe}.c
${OPENAIR_DIR}/common/utils/lte/ue_power.c
${OPENAIR_DIR}/common/utils/lte/prach_utils.c
${OPENAIR1_DIR}/PHY/INIT/lte_param_init.c
${T_SOURCE}
${SHLIB_LOADER_SOURCES}
${NFAPI_USER_DIR}/nfapi.c
)
target_link_libraries (${myExe} PRIVATE
-Wl,--start-group SIMU UTIL SCHED_LIB SCHED_RU_LIB SCHED_UE_LIB PHY_COMMON PHY_NR_COMMON PHY PHY_UE PHY_RU ITTI -Wl,--end-group
pthread m rt CONFIG_LIB ${ATLAS_LIBRARIES} ${T_LIB} dl
)
target_link_libraries(${myExe} PRIVATE asn1_lte_rrc_hdrs)
endforeach(myExe)
#unitary tests for Core NEtwork pieces
#################################
foreach(myExe s1ap
secu_knas_encrypt_eia1
secu_kenb
aes128_ctr
secu_knas_encrypt_eea2
secu_knas secu_knas_encrypt_eea1
kdf
aes128_cmac_encrypt
secu_knas_encrypt_eia2)
add_executable(test_${myExe}
${OPENAIR3_DIR}/TEST/test_${myExe}.c
)
target_link_libraries (test_${myExe}
-Wl,--start-group SECU_CN UTIL -Wl,--end-group m rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} CONFIG_LIB
)
endforeach(myExe)
# to be added
#../targets/TEST/PDCP/test_pdcp.c
#../targets/TEST/PDCP/with_rlc/test_pdcp_rlc.c
#ensure that the T header files are generated before targets depending on them
if (${T_TRACER})
foreach(i
#all "add_executable" definitions (except tests, rb_tool, updatefw)
lte-softmodem lte-uesoftmodem nr-softmodem
nr-uesoftmodem dlsim dlsim_tm4 dlsim_tm7
ulsim pbchsim scansim mbmssim pdcchsim pucchsim prachsim
syncsim nr_ulsim nr_dlsim nr_dlschsim nr_pbchsim nr_pucchsim
nr_ulschsim ldpctest polartest smallblocktest cu_test du_test
#all "add_library" definitions
ITTI lte_rrc nr_rrc s1ap x2ap m2ap m3ap f1ap
params_libconfig oai_usrpdevif oai_bladerfdevif oai_lmssdrdevif oai_iqplayer
oai_eth_transpro oai_mobipass coding HASHTABLE UTIL OMG_SUMO
SECU_OSA SECU_CN SCHED_LIB SCHED_NR_LIB SCHED_RU_LIB SCHED_UE_LIB SCHED_NR_UE_LIB default_sched remote_sched RAL
NFAPI_COMMON_LIB NFAPI_LIB NFAPI_PNF_LIB NFAPI_VNF_LIB NFAPI_USER_LIB
PHY_COMMON PHY PHY_UE PHY_NR PHY_NR_COMMON PHY_NR_UE PHY_RU PHY_MEX
L2 L2_LTE L2_NR L2_LTE_NR L2_UE NR_L2_UE L2_UE_LTE_NR MAC_NR_COMMON MAC_NR MAC_UE_NR ngap
CN_UTILS GTPV1U SCTP_CLIENT MME_APP LIB_NAS_UE NB_IoT SIMU SIMU_ETH OPENAIR0_LIB
ldpc_orig ldpc_optim ldpc_optim8seg ldpc dfts)
if (TARGET ${i})
add_dependencies(${i} generate_T)
endif()
endforeach(i)
endif (${T_TRACER})
##################################################
# Generated specific cases is not regular code
###############################################
################
# Kernel modules
###############
# Set compiler options for kernel modules
# we need to get out cmake to use the regular Linux Kernel process
# this is documented as https://www.kernel.org/doc/Documentation/kbuild/modules.txt
######################################
# retrieve the compiler options to send it to gccxml
get_directory_property(DirDefs COMPILE_DEFINITIONS )
foreach( d ${DirDefs} )
set(module_cc_opt "${module_cc_opt} -D${d}")
endforeach()
get_directory_property( DirDefs INCLUDE_DIRECTORIES )
foreach( d ${DirDefs} )
set(module_cc_opt "${module_cc_opt} -I${d}")
endforeach()
EXECUTE_PROCESS(COMMAND uname -r
OUTPUT_VARIABLE os_release
OUTPUT_STRIP_TRAILING_WHITESPACE)
SET(module_build_path /lib/modules/${os_release}/build)
function(make_driver name dir)
file(MAKE_DIRECTORY ${OPENAIR_BIN_DIR}/${name})
foreach(f IN ITEMS ${ARGN})
list(APPEND src_path_list ${dir}/${f})
string(REGEX REPLACE "c *$" "o" obj ${f})
set(objs "${objs} ${obj}")
endforeach()
CONFIGURE_FILE(${OPENAIR_CMAKE}/tools/Kbuild.cmake ${OPENAIR_BIN_DIR}/${name}/Kbuild)
add_custom_command(OUTPUT ${name}.ko
COMMAND make -C ${module_build_path} M=${OPENAIR_BIN_DIR}/${name}
WORKING_DIRECTORY ${OPENAIR_BIN_DIR}/${name}
COMMENT "building ${module}.ko"
VERBATIM
SOURCES ${src_path_list}
)
add_custom_target(${name} DEPENDS ${name}.ko)
endfunction(make_driver name dir src)
# nashmesh module
################
list(APPEND nasmesh_src device.c common.c ioctl.c classifier.c tool.c mesh.c)
set(module_cc_opt "${module_cc_opt} -DNAS_NETLINK -DPDCP_USE_NETLINK")
# legacy Makefile was using NAS_NETLINK flag, but other drivers the hereafter flag
# so, this cmake use OAI_NW_DRIVER_USE_NETLINK everywhere
if (OAI_NW_DRIVER_USE_NETLINK)
list(APPEND nasmesh_src netlink.c)
endif()
make_driver(nasmesh ${OPENAIR2_DIR}/NETWORK_DRIVER/MESH ${nasmesh_src})
# user space tool for configuring MESH IP driver
################
add_executable(rb_tool
${OPENAIR2_DIR}/NETWORK_DRIVER/MESH/constant.h
${OPENAIR2_DIR}/NETWORK_DRIVER/MESH/ioctl.h
${OPENAIR2_DIR}/NETWORK_DRIVER/MESH/rrc_nas_primitives.h
${OPENAIR2_DIR}/NETWORK_DRIVER/MESH/RB_TOOL/rb_tool.c
)
target_include_directories(rb_tool PRIVATE ${OPENAIR2_DIR}/NETWORK_DRIVER/MESH/)
# ???
####################
list(APPEND oai_nw_drv_src device.c common.c ioctl.c classifier.c tool.c)
if(OAI_NW_DRIVER_USE_NETLINK)
list(APPEND oai_nw_drv_src netlink.c)
endif()
make_driver(oai_nw_drv ${OPENAIR2_DIR}/NETWORK_DRIVER/LTE ${oai_nw_drv_src})
# ue_ip: purpose ???
###############
list(APPEND ue_ip_src device.c common.c)
if(OAI_NW_DRIVER_USE_NETLINK)
list(APPEND ue_ip_src netlink.c)
endif()
make_driver(ue_ip ${OPENAIR2_DIR}/NETWORK_DRIVER/UE_IP ${ue_ip_src})
include(${OPENAIR1_DIR}/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/CMakeLists.txt)
add_subdirectory(common)
add_subdirectory(doc)
add_subdirectory(openair1)
add_subdirectory(openair2)
add_subdirectory(openair3)
Reference in New Issue View Git Blame Copy Permalink