maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
5f01cf6f93baec3b376a1477b09df33cced30d41
openairinterface5g/openair1/PHY/INIT/nr_init_ru.c
T
Robert Schmidt 5f01cf6f93 Keep track of number of RUs in L1 
Need to keep track of number of RUs, as the RU initialization increments
the number of RUs. Therefore, subsequent initializations would fail if
we don't decrement first. There is no better place (or I did not find
it) to decrement the number of RUs than in nr_phy_free_RU(). For this
reason, we also have to manually set the number of RUs in nr_prachsim to
1, otherwise the assert will trigger.
2024-12-16 16:18:10 +01:00

188 lines
7.7 KiB
C
Raw Blame History

/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
#include "phy_init.h"
#include "PHY/phy_extern.h"
#include "SCHED/sched_common.h"
#include "common/utils/LOG/vcd_signal_dumper.h"
#include "assertions.h"
#include <math.h>
#include "openair1/PHY/defs_RU.h"
void init_prach_ru_list(RU_t *ru);
int nr_phy_init_RU(RU_t *ru)
{
NR_DL_FRAME_PARMS *fp = ru->nr_frame_parms;
LOG_D(PHY, "Initializing RU signal buffers (if_south %s) nb_tx %d, nb_rx %d\n", ru_if_types[ru->if_south], ru->nb_tx, ru->nb_rx);
nfapi_nr_config_request_scf_t *cfg = &ru->config;
ru->nb_log_antennas = 0;
for (int n = 0; n < ru->num_gNB; n++) {
if (cfg->carrier_config.num_tx_ant.value > ru->nb_log_antennas)
ru->nb_log_antennas = cfg->carrier_config.num_tx_ant.value;
}
// copy configuration from gNB[0] in to RU, assume that all gNB instances sharing RU use the same configuration
// (at least the parts that are needed by the RU, numerology and PRACH)
AssertFatal(ru->nb_log_antennas > 0 && ru->nb_log_antennas < 13, "ru->nb_log_antennas %d ! \n",ru->nb_log_antennas);
ru->common.beam_id = malloc16_clear(MAX_NUM_BEAM_PERIODS * sizeof(int*));
for(int i = 0; i < MAX_NUM_BEAM_PERIODS; i++)
ru->common.beam_id[i] = malloc16_clear(fp->symbols_per_slot * fp->slots_per_frame * sizeof(int));
if (ru->if_south <= REMOTE_IF5) { // this means REMOTE_IF5 or LOCAL_RF, so allocate memory for time-domain signals
// Time-domain signals
ru->common.txdata = (int32_t**)malloc16(ru->nb_tx*sizeof(int32_t*));
ru->common.rxdata = (int32_t**)malloc16(ru->nb_rx*sizeof(int32_t*) );
for (int i = 0; i < ru->nb_tx; i++) {
// Allocate 10 subframes of I/Q TX signal data (time) if not
ru->common.txdata[i] = (int32_t*)malloc16_clear((ru->sf_extension + fp->samples_per_frame)*sizeof(int32_t));
LOG_D(PHY,
"[INIT] common.txdata[%d] = %p (%lu bytes,sf_extension %d)\n",
i,
ru->common.txdata[i],
(ru->sf_extension + fp->samples_per_frame) * sizeof(int32_t),
ru->sf_extension);
ru->common.txdata[i] = &ru->common.txdata[i][ru->sf_extension];
LOG_D(PHY, "[INIT] common.txdata[%d] = %p \n", i, ru->common.txdata[i]);
}
for (int i = 0; i < ru->nb_rx; i++) {
ru->common.rxdata[i] = (int32_t*)malloc16_clear( fp->samples_per_frame*sizeof(int32_t) );
}
} // IF5 or local RF
else {
ru->common.txdata = (int32_t**)NULL;
ru->common.rxdata = (int32_t**)NULL;
}
if (ru->function != NGFI_RRU_IF5) { // we need to do RX/TX RU processing
LOG_D(PHY, "nb_tx %d\n", ru->nb_tx);
ru->common.rxdata_7_5kHz = (int32_t**)malloc16(ru->nb_rx*sizeof(int32_t*) );
for (int i = 0; i < ru->nb_rx; i++) {
ru->common.rxdata_7_5kHz[i] = (int32_t*)malloc16_clear( 2*fp->samples_per_subframe*2*sizeof(int32_t) );
LOG_D(PHY, "rxdata_7_5kHz[%d] %p for RU %d\n", i, ru->common.rxdata_7_5kHz[i], ru->idx);
}
// allocate precoding input buffers (TX)
ru->common.txdataF = (int32_t **)malloc16(ru->nb_tx*sizeof(int32_t*));
// [hna] samples_per_frame without CP
for(int i = 0; i < ru->nb_tx; ++i)
ru->common.txdataF[i] = (int32_t*)malloc16_clear(fp->samples_per_frame_wCP * sizeof(int32_t));
// allocate IFFT input buffers (TX)
ru->common.txdataF_BF = (int32_t **)malloc16(ru->nb_tx*sizeof(int32_t*));
LOG_D(PHY, "[INIT] common.txdata_BF= %p (%lu bytes)\n", ru->common.txdataF_BF, ru->nb_tx * sizeof(int32_t *));
for (int i = 0; i < ru->nb_tx; i++) {
ru->common.txdataF_BF[i] = (int32_t*)malloc16_clear(fp->samples_per_subframe_wCP*sizeof(int32_t) );
LOG_D(PHY, "txdataF_BF[%d] %p for RU %d\n", i, ru->common.txdataF_BF[i], ru->idx);
}
// allocate FFT output buffers (RX)
ru->common.rxdataF = (int32_t**)malloc16(ru->nb_rx*sizeof(int32_t*) );
for (int i = 0; i < ru->nb_rx; i++) {
// allocate 4 slots of I/Q signal data (frequency)
int size = RU_RX_SLOT_DEPTH * fp->symbols_per_slot * fp->ofdm_symbol_size;
ru->common.rxdataF[i] = (int32_t*)malloc16_clear(sizeof(**ru->common.rxdataF) * size);
LOG_D(PHY, "rxdataF[%d] %p for RU %d\n", i, ru->common.rxdataF[i], ru->idx);
}
/* number of elements of an array X is computed as sizeof(X) / sizeof(X[0]) */
// AssertFatal(ru->nb_rx <= sizeof(ru->prach_rxsigF) / sizeof(ru->prach_rxsigF[0]),
// "nb_antennas_rx too large");
for (int j = 0; j < NUMBER_OF_NR_RU_PRACH_OCCASIONS_MAX; j++) {
ru->prach_rxsigF[j] = (int16_t**)malloc(ru->nb_rx * sizeof(int16_t*));
for (int i = 0; i < ru->nb_rx; i++) {
// largest size for PRACH FFT is 4x98304 (16*24576)
ru->prach_rxsigF[j][i] = (int16_t*)malloc16_clear( 4*98304*2*sizeof(int16_t) );
LOG_D(PHY,"[INIT] prach_vars->rxsigF[%d] = %p\n",i,ru->prach_rxsigF[j][i]);
}
}
AssertFatal(ru->num_gNB <= NUMBER_OF_gNB_MAX,"gNB instances %d > %d\n",
ru->num_gNB,NUMBER_OF_gNB_MAX);
LOG_D(PHY, "[INIT] %s() ru->num_gNB:%d \n", __FUNCTION__, ru->num_gNB);
} // !=IF5
init_prach_ru_list(ru);
return(0);
}
void nr_phy_free_RU(RU_t *ru)
{
LOG_D(PHY, "Freeing RU signal buffers (if_south %s) nb_tx %d\n", ru_if_types[ru->if_south], ru->nb_tx);
if (ru->if_south <= REMOTE_IF5) { // this means REMOTE_IF5 or LOCAL_RF, so free memory for time-domain signals
// Hack: undo what is done at allocation
for (int i = 0; i < ru->nb_tx; i++) {
int32_t *p = &ru->common.txdata[i][-ru->sf_extension];
free_and_zero(p);
}
free_and_zero(ru->common.txdata);
for (int i = 0; i < ru->nb_rx; i++)
free_and_zero(ru->common.rxdata[i]);
free_and_zero(ru->common.rxdata);
} // else: IF5 or local RF -> nothing to free()
if (ru->function != NGFI_RRU_IF5) { // we need to do RX/TX RU processing
for (int i = 0; i < ru->nb_rx; i++)
free_and_zero(ru->common.rxdata_7_5kHz[i]);
free_and_zero(ru->common.rxdata_7_5kHz);
// free beamforming input buffers (TX)
for (int i = 0; i < ru->nb_tx; i++)
free_and_zero(ru->common.txdataF[i]);
free_and_zero(ru->common.txdataF);
// free IFFT input buffers (TX)
for (int i = 0; i < ru->nb_tx; i++)
free_and_zero(ru->common.txdataF_BF[i]);
free_and_zero(ru->common.txdataF_BF);
// free FFT output buffers (RX)
for (int i = 0; i < ru->nb_rx; i++)
free_and_zero(ru->common.rxdataF[i]);
free_and_zero(ru->common.rxdataF);
for (int j = 0; j < NUMBER_OF_NR_RU_PRACH_OCCASIONS_MAX; j++) {
for (int i = 0; i < ru->nb_rx; i++)
free_and_zero(ru->prach_rxsigF[j][i]);
free_and_zero(ru->prach_rxsigF[j]);
}
for(int i = 0; i < MAX_NUM_BEAM_PERIODS; ++i)
free_and_zero(ru->common.beam_id[i]);
free_and_zero(ru->common.beam_id);
}
PHY_VARS_gNB *gNB0 = ru->gNB_list[0];
gNB0->num_RU--;
DevAssert(gNB0->num_RU >= 0);
}
Reference in New Issue View Git Blame Copy Permalink