Files
openairinterface5g/openair1/PHY/CODING/nrLDPC_encoder/ldpc_encoder_optim8segmulti.c
T
Bartosz Podrygajlo 732555ddc3 Run optimized parity check in ldpc encoder only on supported Zc values
Optimized ldpc encoder was run for Zc values that are not supported (Zc == 64). This
commit fixes the fallback condition to Zc >= 72 for BG 2
2024-08-28 17:40:19 +02:00

214 lines
8.2 KiB
C

/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
/*! \file ldpc_encoder_optim8segmulti.c
* \brief Defines the optimized LDPC encoder
* \author Florian Kaltenberger, Raymond Knopp, Kien le Trung (Eurecom)
* \email openair_tech@eurecom.fr
* \date 27-03-2018
* \version 1.0
* \note
* \warning
*/
#include <stdlib.h>
#include <math.h>
#include <stdio.h>
#include <string.h>
#include "assertions.h"
#include "common/utils/LOG/log.h"
#include "time_meas.h"
#include "openair1/PHY/CODING/nrLDPC_defs.h"
#include "PHY/sse_intrin.h"
#include "openair1/PHY/CODING/nrLDPC_extern.h"
#include "ldpc_encode_parity_check.c"
#include "ldpc_generate_coefficient.c"
int LDPCencoder(uint8_t **input, uint8_t **output, encoder_implemparams_t *impp)
{
//set_log(PHY, 4);
int Zc = impp->Zc;
int Kb = impp->Kb;
short block_length = impp->K;
short BG = impp->BG;
int nrows=0,ncols=0;
int rate=3;
int no_punctured_columns,removed_bit;
//Table of possible lifting sizes
char temp;
int simd_size;
unsigned int macro_segment, macro_segment_end;
macro_segment = 8*impp->macro_num;
macro_segment_end = (impp->n_segments > 8*(impp->macro_num+1)) ? 8*(impp->macro_num+1) : impp->n_segments;
///printf("macro_segment: %d\n", macro_segment);
///printf("macro_segment_end: %d\n", macro_segment_end );
simde__m256i shufmask = simde_mm256_set_epi64x(0x0303030303030303, 0x0202020202020202,0x0101010101010101, 0x0000000000000000);
simde__m256i andmask = simde_mm256_set1_epi64x(0x0102040810204080); // every 8 bits -> 8 bytes, pattern repeats.
simde__m256i zero256 = simde_mm256_setzero_si256();
simde__m256i masks[8];
register simde__m256i c256;
masks[0] = simde_mm256_set1_epi8(0x1);
masks[1] = simde_mm256_set1_epi8(0x2);
masks[2] = simde_mm256_set1_epi8(0x4);
masks[3] = simde_mm256_set1_epi8(0x8);
masks[4] = simde_mm256_set1_epi8(0x10);
masks[5] = simde_mm256_set1_epi8(0x20);
masks[6] = simde_mm256_set1_epi8(0x40);
masks[7] = simde_mm256_set1_epi8(0x80);
//determine number of bits in codeword
if (BG==1)
{
nrows=46; //parity check bits
ncols=22; //info bits
rate=3;
}
else if (BG==2)
{
nrows=42; //parity check bits
ncols=10; // info bits
rate=5;
}
#ifdef DEBUG_LDPC
LOG_D(PHY,"ldpc_encoder_optim_8seg: BG %d, Zc %d, Kb %d, block_length %d, segments %d\n",BG,Zc,Kb,block_length,impp->n_segments);
LOG_D(PHY,"ldpc_encoder_optim_8seg: PDU (seg 0) %x %x %x %x\n",input[0][0],input[0][1],input[0][2],input[0][3]);
#endif
AssertFatal(Zc > 0, "no valid Zc found for block length %d\n", block_length);
if ((Zc&31) > 0) simd_size = 16;
else
simd_size = 32;
unsigned char cc[22*Zc] __attribute__((aligned(32))); //padded input, unpacked, max size
unsigned char dd[46*Zc] __attribute__((aligned(32))); //coded parity part output, unpacked, max size
// calculate number of punctured bits
no_punctured_columns=(int)((nrows-2)*Zc+block_length-block_length*rate)/Zc;
removed_bit=(nrows-no_punctured_columns-2) * Zc+block_length-(int)(block_length*rate);
//printf("%d\n",no_punctured_columns);
//printf("%d\n",removed_bit);
// unpack input
memset(cc,0,sizeof(unsigned char) * ncols * Zc);
memset(dd,0,sizeof(unsigned char) * nrows * Zc);
if(impp->tinput != NULL) start_meas(impp->tinput);
#if 0
for (i=0; i<block_length; i++) {
//for (j=0; j<n_segments; j++) {
for (j=macro_segment; j < macro_segment_end; j++) {
temp = (input[j][i/8]&(1<<(i&7)))>>(i&7);
//printf("c(%d,%d)=%d\n",j,i,temp);
c[i] |= (temp << (j-macro_segment));
}
}
#else
for (int i=0; i<block_length>>5; i++) {
c256 = simde_mm256_and_si256(simde_mm256_cmpeq_epi8(simde_mm256_andnot_si256(simde_mm256_shuffle_epi8(simde_mm256_set1_epi32(((uint32_t*)input[macro_segment])[i]), shufmask),andmask),zero256),masks[0]);
//for (j=1; j<n_segments; j++) {
for (int j=macro_segment+1; j < macro_segment_end; j++) {
c256 = simde_mm256_or_si256(simde_mm256_and_si256(simde_mm256_cmpeq_epi8(simde_mm256_andnot_si256(simde_mm256_shuffle_epi8(simde_mm256_set1_epi32(((uint32_t*)input[j])[i]), shufmask),andmask),zero256),masks[j-macro_segment]),c256);
}
((simde__m256i *)cc)[i] = c256;
}
for (int i=(block_length>>5)<<5;i<block_length;i++) {
//for (j=0; j<n_segments; j++) {
for (int j=macro_segment; j < macro_segment_end; j++) {
temp = (input[j][i/8]&(128>>(i&7)))>>(7-(i&7));
//printf("c(%d,%d)=%d\n",j,i,temp);
cc[i] |= (temp << (j-macro_segment));
}
}
#endif
if(impp->tinput != NULL) stop_meas(impp->tinput);
if ((BG==1 && Zc>=176) || (BG==2 && Zc>=72)) {
// extend matrix
if(impp->tprep != NULL) start_meas(impp->tprep);
if(impp->tprep != NULL) stop_meas(impp->tprep);
//parity check part
if(impp->tparity != NULL) start_meas(impp->tparity);
encode_parity_check_part_optim(cc, dd, BG, Zc, Kb, simd_size, ncols);
if(impp->tparity != NULL) stop_meas(impp->tparity);
}
else {
if (encode_parity_check_part_orig(cc, dd, BG, Zc, Kb, block_length)!=0) {
printf("Problem with encoder\n");
return(-1);
}
}
if(impp->toutput != NULL) start_meas(impp->toutput);
// information part and puncture columns
/*
memcpy(&output[0], &c[2*Zc], (block_length-2*Zc)*sizeof(unsigned char));
memcpy(&output[block_length-2*Zc], &d[0], ((nrows-no_punctured_columns) * Zc-removed_bit)*sizeof(unsigned char));
*/
if ((((2*Zc)&31) == 0) && (((block_length-(2*Zc))&31) == 0)) {
//AssertFatal(((2*Zc)&31) == 0,"2*Zc needs to be a multiple of 32 for now\n");
//AssertFatal(((block_length-(2*Zc))&31) == 0,"block_length-(2*Zc) needs to be a multiple of 32 for now\n");
uint32_t l1 = (block_length-(2*Zc))>>5;
uint32_t l2 = ((nrows-no_punctured_columns) * Zc-removed_bit)>>5;
simde__m256i *c256p = (simde__m256i *)&cc[2*Zc];
simde__m256i *d256p = (simde__m256i *)&dd[0];
// if (((block_length-(2*Zc))&31)>0) l1++;
for (int i=0;i<l1;i++)
//for (j=0;j<n_segments;j++) ((simde__m256i *)output[j])[i] = simde_mm256_and_si256(simde_mm256_srai_epi16(c256p[i],j),masks[0]);
for (int j=macro_segment; j < macro_segment_end; j++) ((simde__m256i *)output[j])[i] = simde_mm256_and_si256(simde_mm256_srai_epi16(c256p[i],j-macro_segment),masks[0]);
// if ((((nrows-no_punctured_columns) * Zc-removed_bit)&31)>0) l2++;
for (int i1=0, i=l1;i1<l2;i1++,i++)
//for (j=0;j<n_segments;j++) ((simde__m256i *)output[j])[i] = simde_mm256_and_si256(simde_mm256_srai_epi16(d256p[i1],j),masks[0]);
for (int j=macro_segment; j < macro_segment_end; j++) ((simde__m256i *)output[j])[i] = simde_mm256_and_si256(simde_mm256_srai_epi16(d256p[i1],j-macro_segment),masks[0]);
}
else {
#ifdef DEBUG_LDPC
LOG_W(PHY,"using non-optimized version\n");
#endif
// do non-SIMD version
for (int i=0;i<(block_length-2*Zc);i++)
//for (j=0; j<n_segments; j++)
for (int j=macro_segment; j < macro_segment_end; j++)
output[j][i] = (cc[2*Zc+i]>>(j-macro_segment))&1;
for (int i=0;i<((nrows-no_punctured_columns) * Zc-removed_bit);i++)
//for (j=0; j<n_segments; j++)
for (int j=macro_segment; j < macro_segment_end; j++)
output[j][block_length-2*Zc+i] = (dd[i]>>(j-macro_segment))&1;
}
if(impp->toutput != NULL) stop_meas(impp->toutput);
return 0;
}