Files
openairinterface5g/openair1/PHY/TOOLS/cmult_sv.c
T

263 lines
9.5 KiB
C

/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
#include "PHY/sse_intrin.h"
#include "tools_defs.h"
#include <simde/simde-common.h>
#include <simde/x86/sse.h>
void multadd_complex_vector_real_scalar(int16_t *x,
int16_t alpha,
int16_t *y,
uint8_t zero_flag,
uint32_t N)
{
simd_q15_t alpha_128,*x_128=(simd_q15_t *)x,*y_128=(simd_q15_t*)y;
int n;
alpha_128 = set1_int16(alpha);
const uint32_t num_simd_adds = N / 4;
const uint32_t num_adds = N % 4;
if (zero_flag == 1) {
for (n = 0; n < num_simd_adds; n++) {
y_128[n] = mulhi_int16(x_128[n],alpha_128);
}
for (n = 0; n < num_adds; n++) {
const uint32_t offset = num_simd_adds * 4;
y[offset + n] = (x[offset + n] * alpha) >> 16;
}
} else {
for (n = 0; n < num_simd_adds; n++) {
y_128[n] = adds_int16(y_128[n],mulhi_int16(x_128[n],alpha_128));
}
for (n = 0; n < num_adds; n++) {
const uint32_t offset = num_simd_adds * 4;
y[offset + n] += (x[offset + n] * alpha) >> 16;
}
}
}
void multadd_real_vector_complex_scalar(const int16_t *x, const int16_t *alpha, int16_t *y, uint32_t N)
{
uint32_t i;
// do 8 multiplications at a time
simd_q15_t *x_128 = (simd_q15_t *)x, *y_128 = (simd_q15_t *)y;
// printf("alpha = %d,%d\n",alpha[0],alpha[1]);
const simd_q15_t alpha_r_128 = set1_int16(alpha[0]);
const simd_q15_t alpha_i_128 = set1_int16(alpha[1]);
for (i=0; i<N>>3; i++) {
const simd_q15_t yr = mulhi_s1_int16(alpha_r_128,x_128[i]);
const simd_q15_t yi = mulhi_s1_int16(alpha_i_128,x_128[i]);
const simd_q15_t tmp = simde_mm_loadu_si128(y_128);
simde_mm_storeu_si128(y_128++,simde_mm_adds_epi16(tmp, simde_mm_unpacklo_epi16(yr, yi)));
const simd_q15_t tmp2 = simde_mm_loadu_si128(y_128);
simde_mm_storeu_si128(y_128++, simde_mm_adds_epi16(tmp2, simde_mm_unpackhi_epi16(yr, yi)));
}
}
void rotate_cpx_vector(const c16_t *const x, const c16_t *const alpha, c16_t *y, uint32_t N, uint16_t output_shift)
{
// multiply a complex vector with a complex value (alpha)
// stores result in y
// N is the number of complex numbers
// output_shift reduces the result of the multiplication by this number of bits
#if defined(__x86_64__) || defined (__i386__)
if ( __builtin_cpu_supports("avx2")) {
// output is 32 bytes aligned, but not the input
const c16_t for_re = {alpha->r, -alpha->i};
const simde__m256i alpha_for_real = simde_mm256_set1_epi32(*(uint32_t *)&for_re);
const c16_t for_im = {alpha->i, alpha->r};
const simde__m256i alpha_for_im = simde_mm256_set1_epi32(*(uint32_t *)&for_im);
const simde__m256i perm_mask = simde_mm256_set_epi8(31,
30,
23,
22,
29,
28,
21,
20,
27,
26,
19,
18,
25,
24,
17,
16,
15,
14,
7,
6,
13,
12,
5,
4,
11,
10,
3,
2,
9,
8,
1,
0);
simde__m256i *xd = (simde__m256i *)x;
const simde__m256i *end = xd + N / 8;
for (simde__m256i *yd = (simde__m256i *)y; xd < end; yd++, xd++) {
const simde__m256i y256 = simde_mm256_lddqu_si256(xd);
const simde__m256i xre = simde_mm256_srai_epi32(simde_mm256_madd_epi16(y256, alpha_for_real), output_shift);
const simde__m256i xim = simde_mm256_srai_epi32(simde_mm256_madd_epi16(y256, alpha_for_im), output_shift);
// a bit faster than unpacklo+unpackhi+packs
const simde__m256i tmp = simde_mm256_packs_epi32(xre, xim);
simde_mm256_storeu_si256(yd, simde_mm256_shuffle_epi8(tmp, perm_mask));
}
c16_t* alpha16=(c16_t*) alpha, *yLast;
yLast=((c16_t*)y)+(N/8)*8;
for (c16_t* xTail=(c16_t*) end;
xTail<((c16_t*) x)+N;
xTail++, yLast++) {
*yLast=c16mulShift(*xTail,*alpha16,output_shift);
}
} else {
#endif
// Multiply elementwise two complex vectors of N elements
// x - input 1 in the format |Re0 Im0 |,......,|Re(N-1) Im(N-1)|
// We assume x1 with a dynamic of 15 bit maximum
//
// alpha - input 2 in the format |Re0 Im0|
// We assume x2 with a dynamic of 15 bit maximum
//
// y - output in the format |Re0 Im0|,......,|Re(N-1) Im(N-1)|
//
// N - the size f the vectors (this function does N cpx mpy. WARNING: N>=4;
//
// log2_amp - increase the output amplitude by a factor 2^log2_amp (default is 0)
// WARNING: log2_amp>0 can cause overflow!!
uint32_t i; // loop counter
simd_q15_t *y_128,alpha_128;
int32_t *xd=(int32_t *)x;
simde__m128i shift = simde_mm_cvtsi32_si128(output_shift);
((int16_t *)&alpha_128)[0] = alpha->r;
((int16_t *)&alpha_128)[1] = -alpha->i;
((int16_t *)&alpha_128)[2] = alpha->i;
((int16_t *)&alpha_128)[3] = alpha->r;
((int16_t *)&alpha_128)[4] = alpha->r;
((int16_t *)&alpha_128)[5] = -alpha->i;
((int16_t *)&alpha_128)[6] = alpha->i;
((int16_t *)&alpha_128)[7] = alpha->r;
y_128 = (simd_q15_t *) y;
for(i=0; i<N>>2; i++) {
y_128[i] = simde_mm_packs_epi32( // pack in 16bit integers with saturation [re im re im re im re im]
simde_mm_sra_epi32( // shift right by shift in order to compensate for the input amplitude
simde_mm_madd_epi16( // complex multiply. result is 32bit [Re Im Re Im]
simde_mm_setr_epi32( xd[0+i*4], xd[0+i*4], xd[1+i*4], xd[1+i*4]),
alpha_128
),
shift
),
simde_mm_sra_epi32( // shift right by shift in order to compensate for the input amplitude
simde_mm_madd_epi16( // complex multiply. result is 32bit [Re Im Re Im]
simde_mm_setr_epi32( xd[2+i*4], xd[2+i*4], xd[3+i*4], xd[3+i*4]),
alpha_128
),
shift
)
);
//print_ints("y_128[0]=", &y_128[0]);
}
#if defined(__x86__) || defined(__x86_64__)
}
#endif
}
#ifdef MAIN
#define L 8
main ()
{
int16_t input[256] __attribute__((aligned(16)));
int16_t input2[256] __attribute__((aligned(16)));
int16_t output[256] __attribute__((aligned(16)));
c16_t alpha;
int i;
input[0] = 100;
input[1] = 200;
input[2] = -200;
input[3] = 100;
input[4] = 1000;
input[5] = 2000;
input[6] = -2000;
input[7] = 1000;
input[8] = 100;
input[9] = 200;
input[10] = -200;
input[11] = 100;
input[12] = 1000;
input[13] = 2000;
input[14] = -2000;
input[15] = 1000;
input2[0] = 1;
input2[1] = 2;
input2[2] = 1;
input2[3] = 2;
input2[4] = 10;
input2[5] = 20;
input2[6] = 10;
input2[7] = 20;
input2[8] = 1;
input2[9] = 2;
input2[10] = 1;
input2[11] = 2;
input2[12] = 1000;
input2[13] = 2000;
input2[14] = 1000;
input2[15] = 2000;
alpha->r=32767;
alpha->i=0;
//mult_cpx_vector(input,input2,output,L,0);
rotate_cpx_vector_norep(input,alpha,input,L,15);
for(i=0; i<L<<1; i++)
printf("output[i]=%d\n",input[i]);
}
#endif //MAIN