Files
openairinterface5g/openair1/SCHED_NR/phy_procedures_nr_gNB.c
T

186 lines
6.3 KiB
C

/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
#include "PHY/phy_extern.h"
#include "PHY/defs_gNB.h"
#include "sched_nr.h"
#include "PHY/NR_TRANSPORT/nr_transport.h"
#include "PHY/NR_TRANSPORT/nr_dlsch.h"
#include "SCHED/sched_eNB.h"
#include "SCHED/sched_common_extern.h"
#include "nfapi_interface.h"
#include "SCHED/fapi_l1.h"
#include "common/utils/LOG/log.h"
#include "common/utils/LOG/vcd_signal_dumper.h"
#include "PHY/INIT/phy_init.h"
#include "T.h"
#include "assertions.h"
#include "msc.h"
#include <time.h>
#if defined(ENABLE_ITTI)
#include "intertask_interface.h"
#endif
extern uint8_t nfapi_mode;
/*
int return_ssb_type(nfapi_config_request_t *cfg)
{
int mu = cfg->subframe_config.numerology_index_mu.value;
nr_ssb_type_e ssb_type;
switch(mu) {
case NR_MU_0:
ssb_type = nr_ssb_type_A;
break;
case NR_MU_1:
ssb_type = nr_ssb_type_B;
break;
case NR_MU_3:
ssb_type = nr_ssb_type_D;
break;
case NR_MU_4:
ssb_type = nr_ssb_type_E;
break;
default:
AssertFatal(0==1, "Invalid numerology index %d for the synchronization block\n", mu);
}
LOG_D(PHY, "SSB type %d\n", ssb_type);
return ssb_type;
}*/
void nr_set_ssb_first_subcarrier(nfapi_nr_config_request_t *cfg, NR_DL_FRAME_PARMS *fp) {
fp->ssb_start_subcarrier = (12 * cfg->sch_config.n_ssb_crb.value + cfg->sch_config.ssb_subcarrier_offset.value)/(1<<cfg->subframe_config.numerology_index_mu.value);
LOG_D(PHY, "SSB first subcarrier %d (%d,%d)\n", fp->ssb_start_subcarrier,cfg->sch_config.n_ssb_crb.value,cfg->sch_config.ssb_subcarrier_offset.value);
}
void nr_common_signal_procedures (PHY_VARS_gNB *gNB,int frame, int slot) {
NR_DL_FRAME_PARMS *fp=&gNB->frame_parms;
nfapi_nr_config_request_t *cfg = &gNB->gNB_config;
int **txdataF = gNB->common_vars.txdataF;
uint8_t *pbch_pdu=&gNB->pbch_pdu[0];
uint8_t ssb_index, n_hf;
int ssb_start_symbol, rel_slot;
n_hf = cfg->sch_config.half_frame_index.value;
// to set a effective slot number between 0 to 9 in the half frame where the SSB is supposed to be
rel_slot = (n_hf)? (slot-10) : slot;
LOG_D(PHY,"common_signal_procedures: frame %d, slot %d\n",frame,slot);
if(rel_slot<10 && rel_slot>=0) {
for (int i=0; i<2; i++) { // max two SSB per frame
ssb_index = i + 2*rel_slot; // computing the ssb_index
if ((fp->L_ssb >> ssb_index) & 0x01) { // generating the ssb only if the bit of L_ssb at current ssb index is 1
int ssb_start_symbol_abs = nr_get_ssb_start_symbol(fp, ssb_index, n_hf); // computing the starting symbol for current ssb
ssb_start_symbol = ssb_start_symbol_abs % 14; // start symbol wrt slot
nr_set_ssb_first_subcarrier(cfg, fp); // setting the first subcarrier
LOG_D(PHY,"SS TX: frame %d, slot %d, start_symbol %d\n",frame,slot, ssb_start_symbol);
nr_generate_pss(gNB->d_pss, txdataF[0], AMP, ssb_start_symbol, cfg, fp);
nr_generate_sss(gNB->d_sss, txdataF[0], AMP, ssb_start_symbol, cfg, fp);
nr_generate_pbch_dmrs(gNB->nr_gold_pbch_dmrs[n_hf][ssb_index],txdataF[0], AMP, ssb_start_symbol, cfg, fp);
nr_generate_pbch(&gNB->pbch,
pbch_pdu,
gNB->nr_pbch_interleaver,
txdataF[0],
AMP,
ssb_start_symbol,
n_hf,fp->Lmax,ssb_index,
frame, cfg, fp);
}
}
}
}
void phy_procedures_gNB_TX(PHY_VARS_gNB *gNB,
gNB_L1_rxtx_proc_t *proc,
int do_meas) {
int aa;
int frame=proc->frame_tx;
int slot=proc->slot_tx;
uint8_t num_dci=0,num_pdsch_rnti;
NR_DL_FRAME_PARMS *fp=&gNB->frame_parms;
nfapi_nr_config_request_t *cfg = &gNB->gNB_config;
int offset = gNB->CC_id;
if ((cfg->subframe_config.duplex_mode.value == TDD) && (nr_slot_select(cfg,slot)==SF_UL)) return;
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_ENB_TX+offset,1);
if (do_meas==1) start_meas(&gNB->phy_proc_tx);
// clear the transmit data array for the current subframe
for (aa=0; aa<1/*15*/; aa++) {
memset(gNB->common_vars.txdataF[aa],0,fp->samples_per_slot_wCP*sizeof(int32_t));
}
if (nfapi_mode == 0 || nfapi_mode == 1) {
nr_common_signal_procedures(gNB,frame, slot);
//if (frame == 9)
//write_output("txdataF.m","txdataF",gNB->common_vars.txdataF[aa],fp->samples_per_frame_wCP, 1, 1);
}
num_dci = gNB->pdcch_vars.num_dci;
num_pdsch_rnti = gNB->pdcch_vars.num_pdsch_rnti;
if (num_dci) {
LOG_I(PHY, "[gNB %d] Frame %d slot %d \
Calling nr_generate_dci_top (number of DCI %d)\n", gNB->Mod_id, frame, slot, num_dci);
if (nfapi_mode == 0 || nfapi_mode == 1) {
nr_generate_dci_top(gNB->pdcch_vars,
gNB->nr_gold_pdcch_dmrs[slot],
gNB->common_vars.txdataF[0],
AMP, *fp, *cfg);
if (num_pdsch_rnti) {
LOG_I(PHY, "PDSCH generation started (%d)\n", num_pdsch_rnti);
nr_generate_pdsch(*gNB->dlsch[0][0],
gNB->pdcch_vars.dci_alloc[0],
gNB->nr_gold_pdsch_dmrs[slot],
gNB->common_vars.txdataF,
AMP, slot, *fp, *cfg);
}
}
}
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_ENB_TX+offset,0);
}