Files
openairinterface5g/openair2/M2AP/m2ap_decoder.c
T
Robert Schmidt 6ae4ec37ca Remove most doxygen file-level commands, copyrights, and authors
Remove the \file directive, as it is always superfluous  because the
current file is implicit [1]:

> If the file name is omitted (i.e. the line after \file is left blank)
> then the documentation block that contains the \file command will belong
> to the file it is located in.

Author names and e-mails are not relevant for us: it can always be
inferred from git blame, and is often outdated.

Eurecom code has been contributed and was under OAI PL v1.0/v1.1.

For the cpack package contact: put generic email address that is
independent of an individual and that will remain reachable.

[1] https://www.doxygen.nl/manual/commands.html#cmdfile
2026-03-27 14:52:47 +01:00

192 lines
6.6 KiB
C

/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
/*!
* \brief m2ap decoder procedures
*/
#include <stdio.h>
#include "assertions.h"
#include "intertask_interface.h"
#include "m2ap_common.h"
#include "m2ap_decoder.h"
static int m2ap_decode_initiating_message(M2AP_M2AP_PDU_t *pdu)
{
DevAssert(pdu != NULL);
switch(pdu->choice.initiatingMessage.procedureCode) {
case M2AP_ProcedureCode_id_sessionStart:
//asn_encode_to_new_buffer(NULL, ATS_CANONICAL_XER, &asn_DEF_M2AP_M2AP_PDU, pdu);
M2AP_INFO("m2ap__decode_initiating_message!\n");
break;
case M2AP_ProcedureCode_id_sessionStop:
//asn_encode_to_new_buffer(NULL, ATS_CANONICAL_XER, &asn_DEF_M2AP_M2AP_PDU, pdu);
M2AP_INFO("m2ap__decode_initiating_message!\n");
break;
case M2AP_ProcedureCode_id_m2Setup:
//asn_encode_to_new_buffer(NULL, ATS_CANONICAL_XER, &asn_DEF_M2AP_M2AP_PDU, pdu);
M2AP_INFO("m2ap__decode_initiating_message!\n");
break;
case M2AP_ProcedureCode_id_mbmsSchedulingInformation:
//asn_encode_to_new_buffer(NULL, ATS_CANONICAL_XER, &asn_DEF_M2AP_M2AP_PDU, pdu);
M2AP_INFO("m2ap__decode_initiating_message!\n");
break;
// case M2AP_ProcedureCode_id_handoverPreparation:
// //asn_encode_to_new_buffer(NULL, ATS_CANONICAL_XER, &asn_DEF_M2AP_M2AP_PDU, pdu);
// M2AP_INFO("m2ap__decode_initiating_message!\n");
// break;
//
// case M2AP_ProcedureCode_id_uEContextRelease:
// //asn_encode_to_new_buffer(NULL, ATS_CANONICAL_XER, &asn_DEF_M2AP_M2AP_PDU, pdu);
// M2AP_INFO("m2ap__decode_initiating_message!\n");
// break;
//
// case M2AP_ProcedureCode_id_handoverCancel:
// //asn_encode_to_new_buffer(NULL, ATS_CANONICAL_XER, &asn_DEF_M2AP_M2AP_PDU, pdu);
// M2AP_INFO("m2ap__decode_initiating_message!\n");
// break;
//
default:
M2AP_ERROR("Unknown procedure ID (%d) for initiating message\n",
(int)pdu->choice.initiatingMessage.procedureCode);
AssertFatal( 0, "Unknown procedure ID (%d) for initiating message\n",
(int)pdu->choice.initiatingMessage.procedureCode);
return -1;
}
return 0;
}
static int m2ap_decode_successful_outcome(M2AP_M2AP_PDU_t *pdu)
{
DevAssert(pdu != NULL);
switch(pdu->choice.successfulOutcome.procedureCode) {
case M2AP_ProcedureCode_id_sessionStart:
//asn_encode_to_new_buffer(NULL, ATS_CANONICAL_XER, &asn_DEF_M2AP_M2AP_PDU, pdu);
M2AP_INFO("m2ap__decode_successfuloutcome_message!\n");
break;
case M2AP_ProcedureCode_id_sessionStop:
//asn_encode_to_new_buffer(NULL, ATS_CANONICAL_XER, &asn_DEF_M2AP_M2AP_PDU, pdu);
M2AP_INFO("m2ap__decode_succesfuloutcome_message!\n");
break;
case M2AP_ProcedureCode_id_m2Setup:
//asn_encode_to_new_buffer(NULL, ATS_CANONICAL_XER, &asn_DEF_M2AP_M2AP_PDU, pdu);
M2AP_INFO("m2ap__decode_succesfuloutcome_message!\n");
break;
case M2AP_ProcedureCode_id_mbmsSchedulingInformation:
//asn_encode_to_new_buffer(NULL, ATS_CANONICAL_XER, &asn_DEF_M2AP_M2AP_PDU, pdu);
M2AP_INFO("m2ap__decode_succesfuloutcome_message!\n");
break;
// case M2AP_ProcedureCode_id_handoverPreparation:
// //asn_encode_to_new_buffer(NULL, ATS_CANONICAL_XER, &asn_DEF_M2AP_M2AP_PDU, pdu);
// M2AP_INFO("m2ap__decode_successfuloutcome_message!\n");
// break;
//
default:
M2AP_ERROR("Unknown procedure ID (%d) for successfull outcome message\n",
(int)pdu->choice.successfulOutcome.procedureCode);
return -1;
}
return 0;
}
static int m2ap_decode_unsuccessful_outcome(M2AP_M2AP_PDU_t *pdu)
{
DevAssert(pdu != NULL);
switch(pdu->choice.unsuccessfulOutcome.procedureCode) {
case M2AP_ProcedureCode_id_sessionStart:
//asn_encode_to_new_buffer(NULL, ATS_CANONICAL_XER, &asn_DEF_M2AP_M2AP_PDU, pdu);
M2AP_INFO("m2ap__decode_initiating_message!\n");
break;
case M2AP_ProcedureCode_id_sessionStop:
//asn_encode_to_new_buffer(NULL, ATS_CANONICAL_XER, &asn_DEF_M2AP_M2AP_PDU, pdu);
M2AP_INFO("m2ap__decode_initiating_message!\n");
break;
case M2AP_ProcedureCode_id_m2Setup:
//asn_encode_to_new_buffer(NULL, ATS_CANONICAL_XER, &asn_DEF_M2AP_M2AP_PDU, pdu);
M2AP_INFO("m2ap__decode_initiating_message!\n");
break;
case M2AP_ProcedureCode_id_mbmsSchedulingInformation:
//asn_encode_to_new_buffer(NULL, ATS_CANONICAL_XER, &asn_DEF_M2AP_M2AP_PDU, pdu);
M2AP_INFO("m2ap__decode_initiating_message!\n");
break;
default:
M2AP_ERROR("Unknown procedure ID (%d) for unsuccessfull outcome message\n",
(int)pdu->choice.unsuccessfulOutcome.procedureCode);
return -1;
}
return 0;
}
int m2ap_decode_pdu(M2AP_M2AP_PDU_t *pdu, const uint8_t *const buffer, uint32_t length)
{
asn_dec_rval_t dec_ret;
DevAssert(buffer != NULL);
dec_ret = aper_decode(NULL,
&asn_DEF_M2AP_M2AP_PDU,
(void **)&pdu,
buffer,
length,
0,
0);
if (LOG_DEBUGFLAG(DEBUG_ASN1)) {
xer_fprint(stdout, &asn_DEF_M2AP_M2AP_PDU, pdu);
}
if (dec_ret.code != RC_OK) {
M2AP_ERROR("Failed to decode pdu\n");
return -1;
}
switch(pdu->present) {
case M2AP_M2AP_PDU_PR_initiatingMessage:
return m2ap_decode_initiating_message(pdu);
case M2AP_M2AP_PDU_PR_successfulOutcome:
return m2ap_decode_successful_outcome(pdu);
case M2AP_M2AP_PDU_PR_unsuccessfulOutcome:
return m2ap_decode_unsuccessful_outcome(pdu);
default:
M2AP_DEBUG("Unknown presence (%d) or not implemented\n", (int)pdu->present);
break;
}
return -1;
}